Warning: This file is not a C or C++ file. It does not have highlighting.
| 1 | /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ |
|---|---|
| 2 | /* |
| 3 | * On-board switches for the Renesas RZ/G3S SMARC Module and RZ SMARC Carrier II |
| 4 | * boards. |
| 5 | * |
| 6 | * Copyright (C) 2024 Renesas Electronics Corp. |
| 7 | */ |
| 8 | |
| 9 | #ifndef __RZG3S_SMARC_SWITCHES_H__ |
| 10 | #define __RZG3S_SMARC_SWITCHES_H__ |
| 11 | |
| 12 | /* |
| 13 | * On-board switches' states: |
| 14 | * @SW_OFF: switch's state is OFF |
| 15 | * @SW_ON: switch's state is ON |
| 16 | */ |
| 17 | #define SW_OFF 0 |
| 18 | #define SW_ON 1 |
| 19 | |
| 20 | /* |
| 21 | * SW_CONFIG[x] switches' states: |
| 22 | * @SW_CONFIG2: |
| 23 | * SW_OFF - SD0 is connected to eMMC |
| 24 | * SW_ON - SD0 is connected to uSD0 card |
| 25 | * @SW_CONFIG3: |
| 26 | * SW_OFF - SD2 is connected to SoC |
| 27 | * SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC |
| 28 | */ |
| 29 | #define SW_CONFIG2 SW_OFF |
| 30 | #define SW_CONFIG3 SW_ON |
| 31 | |
| 32 | /* |
| 33 | * SW_OPT_MUX[x] switches' states: |
| 34 | * @SW_OPT_MUX4: |
| 35 | * SW_OFF - The SMARC SER0 signals are routed to M.2 Key E UART |
| 36 | * SW_ON - The SMARC SER0 signals are routed to PMOD1 |
| 37 | */ |
| 38 | #define SW_OPT_MUX4 SW_ON |
| 39 | |
| 40 | #endif /* __RZG3S_SMARC_SWITCHES_H__ */ |
| 41 |
Warning: This file is not a C or C++ file. It does not have highlighting.