Warning: This file is not a C or C++ file. It does not have highlighting.
| 1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
|---|---|
| 2 | /* |
| 3 | * Copyright (C) 2012 ARM Ltd. |
| 4 | */ |
| 5 | #ifndef __ASM_HW_BREAKPOINT_H |
| 6 | #define __ASM_HW_BREAKPOINT_H |
| 7 | |
| 8 | #include <asm/cputype.h> |
| 9 | #include <asm/cpufeature.h> |
| 10 | #include <asm/sysreg.h> |
| 11 | #include <asm/virt.h> |
| 12 | |
| 13 | struct arch_hw_breakpoint_ctrl { |
| 14 | u32 __reserved : 19, |
| 15 | len : 8, |
| 16 | type : 2, |
| 17 | privilege : 2, |
| 18 | enabled : 1; |
| 19 | }; |
| 20 | |
| 21 | struct arch_hw_breakpoint { |
| 22 | u64 address; |
| 23 | u64 trigger; |
| 24 | struct arch_hw_breakpoint_ctrl ctrl; |
| 25 | }; |
| 26 | |
| 27 | /* Privilege Levels */ |
| 28 | #define AARCH64_BREAKPOINT_EL1 1 |
| 29 | #define AARCH64_BREAKPOINT_EL0 2 |
| 30 | |
| 31 | #define DBG_HMC_HYP (1 << 13) |
| 32 | |
| 33 | static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl) |
| 34 | { |
| 35 | u32 val = (ctrl.len << 5) | (ctrl.type << 3) | (ctrl.privilege << 1) | |
| 36 | ctrl.enabled; |
| 37 | |
| 38 | if (is_kernel_in_hyp_mode() && ctrl.privilege == AARCH64_BREAKPOINT_EL1) |
| 39 | val |= DBG_HMC_HYP; |
| 40 | |
| 41 | return val; |
| 42 | } |
| 43 | |
| 44 | static inline void decode_ctrl_reg(u32 reg, |
| 45 | struct arch_hw_breakpoint_ctrl *ctrl) |
| 46 | { |
| 47 | ctrl->enabled = reg & 0x1; |
| 48 | reg >>= 1; |
| 49 | ctrl->privilege = reg & 0x3; |
| 50 | reg >>= 2; |
| 51 | ctrl->type = reg & 0x3; |
| 52 | reg >>= 2; |
| 53 | ctrl->len = reg & 0xff; |
| 54 | } |
| 55 | |
| 56 | /* Breakpoint */ |
| 57 | #define ARM_BREAKPOINT_EXECUTE 0 |
| 58 | |
| 59 | /* Watchpoints */ |
| 60 | #define ARM_BREAKPOINT_LOAD 1 |
| 61 | #define ARM_BREAKPOINT_STORE 2 |
| 62 | |
| 63 | /* Lengths */ |
| 64 | #define ARM_BREAKPOINT_LEN_1 0x1 |
| 65 | #define ARM_BREAKPOINT_LEN_2 0x3 |
| 66 | #define ARM_BREAKPOINT_LEN_3 0x7 |
| 67 | #define ARM_BREAKPOINT_LEN_4 0xf |
| 68 | #define ARM_BREAKPOINT_LEN_5 0x1f |
| 69 | #define ARM_BREAKPOINT_LEN_6 0x3f |
| 70 | #define ARM_BREAKPOINT_LEN_7 0x7f |
| 71 | #define ARM_BREAKPOINT_LEN_8 0xff |
| 72 | |
| 73 | /* Kernel stepping */ |
| 74 | #define ARM_KERNEL_STEP_NONE 0 |
| 75 | #define ARM_KERNEL_STEP_ACTIVE 1 |
| 76 | #define ARM_KERNEL_STEP_SUSPEND 2 |
| 77 | |
| 78 | /* |
| 79 | * Limits. |
| 80 | * Changing these will require modifications to the register accessors. |
| 81 | */ |
| 82 | #define ARM_MAX_BRP 16 |
| 83 | #define ARM_MAX_WRP 16 |
| 84 | |
| 85 | /* Virtual debug register bases. */ |
| 86 | #define AARCH64_DBG_REG_BVR 0 |
| 87 | #define AARCH64_DBG_REG_BCR (AARCH64_DBG_REG_BVR + ARM_MAX_BRP) |
| 88 | #define AARCH64_DBG_REG_WVR (AARCH64_DBG_REG_BCR + ARM_MAX_BRP) |
| 89 | #define AARCH64_DBG_REG_WCR (AARCH64_DBG_REG_WVR + ARM_MAX_WRP) |
| 90 | |
| 91 | /* Debug register names. */ |
| 92 | #define AARCH64_DBG_REG_NAME_BVR bvr |
| 93 | #define AARCH64_DBG_REG_NAME_BCR bcr |
| 94 | #define AARCH64_DBG_REG_NAME_WVR wvr |
| 95 | #define AARCH64_DBG_REG_NAME_WCR wcr |
| 96 | |
| 97 | /* Accessor macros for the debug registers. */ |
| 98 | #define AARCH64_DBG_READ(N, REG, VAL) do {\ |
| 99 | VAL = read_sysreg(dbg##REG##N##_el1);\ |
| 100 | } while (0) |
| 101 | |
| 102 | #define AARCH64_DBG_WRITE(N, REG, VAL) do {\ |
| 103 | write_sysreg(VAL, dbg##REG##N##_el1);\ |
| 104 | } while (0) |
| 105 | |
| 106 | struct task_struct; |
| 107 | struct notifier_block; |
| 108 | struct perf_event_attr; |
| 109 | struct perf_event; |
| 110 | struct pmu; |
| 111 | |
| 112 | extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl, |
| 113 | int *gen_len, int *gen_type, int *offset); |
| 114 | extern int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw); |
| 115 | extern int hw_breakpoint_arch_parse(struct perf_event *bp, |
| 116 | const struct perf_event_attr *attr, |
| 117 | struct arch_hw_breakpoint *hw); |
| 118 | extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused, |
| 119 | unsigned long val, void *data); |
| 120 | |
| 121 | extern int arch_install_hw_breakpoint(struct perf_event *bp); |
| 122 | extern void arch_uninstall_hw_breakpoint(struct perf_event *bp); |
| 123 | extern void hw_breakpoint_pmu_read(struct perf_event *bp); |
| 124 | extern int hw_breakpoint_slots(int type); |
| 125 | |
| 126 | #ifdef CONFIG_HAVE_HW_BREAKPOINT |
| 127 | extern void hw_breakpoint_thread_switch(struct task_struct *next); |
| 128 | extern void ptrace_hw_copy_thread(struct task_struct *task); |
| 129 | #else |
| 130 | static inline void hw_breakpoint_thread_switch(struct task_struct *next) |
| 131 | { |
| 132 | } |
| 133 | static inline void ptrace_hw_copy_thread(struct task_struct *task) |
| 134 | { |
| 135 | } |
| 136 | #endif |
| 137 | |
| 138 | /* Determine number of BRP registers available. */ |
| 139 | static inline int get_num_brps(void) |
| 140 | { |
| 141 | u64 dfr0 = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1); |
| 142 | return 1 + |
| 143 | cpuid_feature_extract_unsigned_field(dfr0, |
| 144 | ID_AA64DFR0_EL1_BRPs_SHIFT); |
| 145 | } |
| 146 | |
| 147 | /* Determine number of WRP registers available. */ |
| 148 | static inline int get_num_wrps(void) |
| 149 | { |
| 150 | u64 dfr0 = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1); |
| 151 | return 1 + |
| 152 | cpuid_feature_extract_unsigned_field(dfr0, |
| 153 | ID_AA64DFR0_EL1_WRPs_SHIFT); |
| 154 | } |
| 155 | |
| 156 | #ifdef CONFIG_CPU_PM |
| 157 | extern void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int)); |
| 158 | #else |
| 159 | static inline void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int)) |
| 160 | { |
| 161 | } |
| 162 | #endif |
| 163 | |
| 164 | #endif /* __ASM_BREAKPOINT_H */ |
| 165 |
Warning: This file is not a C or C++ file. It does not have highlighting.
