| 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * arch/sh/drivers/pci/fixups-landisk.c |
| 4 | * |
| 5 | * PCI initialization for the I-O DATA Device, Inc. LANDISK board |
| 6 | * |
| 7 | * Copyright (C) 2006 kogiidena |
| 8 | * Copyright (C) 2010 Nobuhiro Iwamatsu |
| 9 | */ |
| 10 | #include <linux/kernel.h> |
| 11 | #include <linux/types.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/delay.h> |
| 14 | #include <linux/pci.h> |
| 15 | #include <linux/sh_intc.h> |
| 16 | #include "pci-sh4.h" |
| 17 | |
| 18 | #define PCIMCR_MRSET_OFF 0xBFFFFFFF |
| 19 | #define PCIMCR_RFSH_OFF 0xFFFFFFFB |
| 20 | |
| 21 | int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin) |
| 22 | { |
| 23 | /* |
| 24 | * slot0: pin1-4 = irq5,6,7,8 |
| 25 | * slot1: pin1-4 = irq6,7,8,5 |
| 26 | * slot2: pin1-4 = irq7,8,5,6 |
| 27 | * slot3: pin1-4 = irq8,5,6,7 |
| 28 | */ |
| 29 | int irq = ((slot + pin - 1) & 0x3) + evt2irq(0x2a0); |
| 30 | |
| 31 | if ((slot | (pin - 1)) > 0x3) { |
| 32 | printk(KERN_WARNING "PCI: Bad IRQ mapping request for slot %d pin %c\n" , |
| 33 | slot, pin - 1 + 'A'); |
| 34 | return -1; |
| 35 | } |
| 36 | return irq; |
| 37 | } |
| 38 | |
| 39 | int pci_fixup_pcic(struct pci_channel *chan) |
| 40 | { |
| 41 | unsigned long bcr1, mcr; |
| 42 | |
| 43 | bcr1 = __raw_readl(SH7751_BCR1); |
| 44 | bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ |
| 45 | pci_write_reg(chan, val: bcr1, SH4_PCIBCR1); |
| 46 | |
| 47 | mcr = __raw_readl(SH7751_MCR); |
| 48 | mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; |
| 49 | pci_write_reg(chan, val: mcr, SH4_PCIMCR); |
| 50 | |
| 51 | pci_write_reg(chan, val: 0x0c000000, SH7751_PCICONF5); |
| 52 | pci_write_reg(chan, val: 0xd0000000, SH7751_PCICONF6); |
| 53 | pci_write_reg(chan, val: 0x0c000000, SH4_PCILAR0); |
| 54 | pci_write_reg(chan, val: 0x00000000, SH4_PCILAR1); |
| 55 | |
| 56 | return 0; |
| 57 | } |
| 58 | |