| 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * Copyright (c) 1999-2001 Vojtech Pavlik |
| 4 | * |
| 5 | * Based on the work of: |
| 6 | * James Banks Matthew Dillon |
| 7 | * David Giller Nathan Laredo |
| 8 | * Linus Torvalds Johan Myreen |
| 9 | * Cliff Matthews Philip Blundell |
| 10 | * Russell King |
| 11 | */ |
| 12 | |
| 13 | /* |
| 14 | * Logitech Bus Mouse Driver for Linux |
| 15 | */ |
| 16 | |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/delay.h> |
| 19 | #include <linux/ioport.h> |
| 20 | #include <linux/init.h> |
| 21 | #include <linux/input.h> |
| 22 | #include <linux/interrupt.h> |
| 23 | |
| 24 | #include <asm/io.h> |
| 25 | #include <asm/irq.h> |
| 26 | |
| 27 | MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>" ); |
| 28 | MODULE_DESCRIPTION("Logitech busmouse driver" ); |
| 29 | MODULE_LICENSE("GPL" ); |
| 30 | |
| 31 | #define LOGIBM_BASE 0x23c |
| 32 | #define LOGIBM_EXTENT 4 |
| 33 | |
| 34 | #define LOGIBM_DATA_PORT LOGIBM_BASE + 0 |
| 35 | #define LOGIBM_SIGNATURE_PORT LOGIBM_BASE + 1 |
| 36 | #define LOGIBM_CONTROL_PORT LOGIBM_BASE + 2 |
| 37 | #define LOGIBM_CONFIG_PORT LOGIBM_BASE + 3 |
| 38 | |
| 39 | #define LOGIBM_ENABLE_IRQ 0x00 |
| 40 | #define LOGIBM_DISABLE_IRQ 0x10 |
| 41 | #define LOGIBM_READ_X_LOW 0x80 |
| 42 | #define LOGIBM_READ_X_HIGH 0xa0 |
| 43 | #define LOGIBM_READ_Y_LOW 0xc0 |
| 44 | #define LOGIBM_READ_Y_HIGH 0xe0 |
| 45 | |
| 46 | #define LOGIBM_DEFAULT_MODE 0x90 |
| 47 | #define LOGIBM_CONFIG_BYTE 0x91 |
| 48 | #define LOGIBM_SIGNATURE_BYTE 0xa5 |
| 49 | |
| 50 | #define LOGIBM_IRQ 5 |
| 51 | |
| 52 | static int logibm_irq = LOGIBM_IRQ; |
| 53 | module_param_hw_named(irq, logibm_irq, uint, irq, 0); |
| 54 | MODULE_PARM_DESC(irq, "IRQ number (5=default)" ); |
| 55 | |
| 56 | static struct input_dev *logibm_dev; |
| 57 | |
| 58 | static irqreturn_t logibm_interrupt(int irq, void *dev_id) |
| 59 | { |
| 60 | char dx, dy; |
| 61 | unsigned char buttons; |
| 62 | |
| 63 | outb(LOGIBM_READ_X_LOW, LOGIBM_CONTROL_PORT); |
| 64 | dx = (inb(LOGIBM_DATA_PORT) & 0xf); |
| 65 | outb(LOGIBM_READ_X_HIGH, LOGIBM_CONTROL_PORT); |
| 66 | dx |= (inb(LOGIBM_DATA_PORT) & 0xf) << 4; |
| 67 | outb(LOGIBM_READ_Y_LOW, LOGIBM_CONTROL_PORT); |
| 68 | dy = (inb(LOGIBM_DATA_PORT) & 0xf); |
| 69 | outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT); |
| 70 | buttons = inb(LOGIBM_DATA_PORT); |
| 71 | dy |= (buttons & 0xf) << 4; |
| 72 | buttons = ~buttons >> 5; |
| 73 | |
| 74 | input_report_rel(dev: logibm_dev, REL_X, value: dx); |
| 75 | input_report_rel(dev: logibm_dev, REL_Y, value: dy); |
| 76 | input_report_key(dev: logibm_dev, BTN_RIGHT, value: buttons & 1); |
| 77 | input_report_key(dev: logibm_dev, BTN_MIDDLE, value: buttons & 2); |
| 78 | input_report_key(dev: logibm_dev, BTN_LEFT, value: buttons & 4); |
| 79 | input_sync(dev: logibm_dev); |
| 80 | |
| 81 | outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); |
| 82 | return IRQ_HANDLED; |
| 83 | } |
| 84 | |
| 85 | static int logibm_open(struct input_dev *dev) |
| 86 | { |
| 87 | if (request_irq(irq: logibm_irq, handler: logibm_interrupt, flags: 0, name: "logibm" , NULL)) { |
| 88 | printk(KERN_ERR "logibm.c: Can't allocate irq %d\n" , logibm_irq); |
| 89 | return -EBUSY; |
| 90 | } |
| 91 | outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); |
| 92 | return 0; |
| 93 | } |
| 94 | |
| 95 | static void logibm_close(struct input_dev *dev) |
| 96 | { |
| 97 | outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); |
| 98 | free_irq(logibm_irq, NULL); |
| 99 | } |
| 100 | |
| 101 | static int __init logibm_init(void) |
| 102 | { |
| 103 | int err; |
| 104 | |
| 105 | if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm" )) { |
| 106 | printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n" , LOGIBM_BASE); |
| 107 | return -EBUSY; |
| 108 | } |
| 109 | |
| 110 | outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT); |
| 111 | outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT); |
| 112 | udelay(usec: 100); |
| 113 | |
| 114 | if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) { |
| 115 | printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n" , LOGIBM_BASE); |
| 116 | err = -ENODEV; |
| 117 | goto err_release_region; |
| 118 | } |
| 119 | |
| 120 | outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT); |
| 121 | outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); |
| 122 | |
| 123 | logibm_dev = input_allocate_device(); |
| 124 | if (!logibm_dev) { |
| 125 | printk(KERN_ERR "logibm.c: Not enough memory for input device\n" ); |
| 126 | err = -ENOMEM; |
| 127 | goto err_release_region; |
| 128 | } |
| 129 | |
| 130 | logibm_dev->name = "Logitech bus mouse" ; |
| 131 | logibm_dev->phys = "isa023c/input0" ; |
| 132 | logibm_dev->id.bustype = BUS_ISA; |
| 133 | logibm_dev->id.vendor = 0x0003; |
| 134 | logibm_dev->id.product = 0x0001; |
| 135 | logibm_dev->id.version = 0x0100; |
| 136 | |
| 137 | logibm_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); |
| 138 | logibm_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | |
| 139 | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); |
| 140 | logibm_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); |
| 141 | |
| 142 | logibm_dev->open = logibm_open; |
| 143 | logibm_dev->close = logibm_close; |
| 144 | |
| 145 | err = input_register_device(logibm_dev); |
| 146 | if (err) |
| 147 | goto err_free_dev; |
| 148 | |
| 149 | return 0; |
| 150 | |
| 151 | err_free_dev: |
| 152 | input_free_device(dev: logibm_dev); |
| 153 | err_release_region: |
| 154 | release_region(LOGIBM_BASE, LOGIBM_EXTENT); |
| 155 | |
| 156 | return err; |
| 157 | } |
| 158 | |
| 159 | static void __exit logibm_exit(void) |
| 160 | { |
| 161 | input_unregister_device(logibm_dev); |
| 162 | release_region(LOGIBM_BASE, LOGIBM_EXTENT); |
| 163 | } |
| 164 | |
| 165 | module_init(logibm_init); |
| 166 | module_exit(logibm_exit); |
| 167 | |