1 | /* SPDX-License-Identifier: GPL-2.0 */ |
2 | /* |
3 | * TI pm33xx platform data |
4 | * |
5 | * Copyright (C) 2016-2018 Texas Instruments, Inc. |
6 | * Dave Gerlach <d-gerlach@ti.com> |
7 | */ |
8 | |
9 | #ifndef _LINUX_PLATFORM_DATA_PM33XX_H |
10 | #define _LINUX_PLATFORM_DATA_PM33XX_H |
11 | |
12 | #include <linux/kbuild.h> |
13 | #include <linux/types.h> |
14 | |
15 | /* |
16 | * WFI Flags for sleep code control |
17 | * |
18 | * These flags allow PM code to exclude certain operations from happening |
19 | * in the low level ASM code found in sleep33xx.S and sleep43xx.S |
20 | * |
21 | * WFI_FLAG_FLUSH_CACHE: Flush the ARM caches and disable caching. Only |
22 | * needed when MPU will lose context. |
23 | * WFI_FLAG_SELF_REFRESH: Let EMIF place DDR memory into self-refresh and |
24 | * disable EMIF. |
25 | * WFI_FLAG_SAVE_EMIF: Save context of all EMIF registers and restore in |
26 | * resume path. Only needed if PER domain loses context |
27 | * and must also have WFI_FLAG_SELF_REFRESH set. |
28 | * WFI_FLAG_WAKE_M3: Disable MPU clock or clockdomain to cause wkup_m3 to |
29 | * execute when WFI instruction executes. |
30 | * WFI_FLAG_RTC_ONLY: Configure the RTC to enter RTC+DDR mode. |
31 | */ |
32 | #define WFI_FLAG_FLUSH_CACHE BIT(0) |
33 | #define WFI_FLAG_SELF_REFRESH BIT(1) |
34 | #define WFI_FLAG_SAVE_EMIF BIT(2) |
35 | #define WFI_FLAG_WAKE_M3 BIT(3) |
36 | #define WFI_FLAG_RTC_ONLY BIT(4) |
37 | |
38 | #ifndef __ASSEMBLER__ |
39 | struct am33xx_pm_sram_addr { |
40 | void (*do_wfi)(void); |
41 | unsigned long *do_wfi_sz; |
42 | unsigned long *resume_offset; |
43 | unsigned long *emif_sram_table; |
44 | unsigned long *ro_sram_data; |
45 | unsigned long resume_address; |
46 | }; |
47 | |
48 | struct am33xx_pm_platform_data { |
49 | int (*init)(int (*idle)(u32 wfi_flags)); |
50 | int (*deinit)(void); |
51 | int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long), |
52 | unsigned long args); |
53 | int (*cpu_suspend)(int (*fn)(unsigned long), unsigned long args); |
54 | void (*begin_suspend)(void); |
55 | void (*finish_suspend)(void); |
56 | struct am33xx_pm_sram_addr *(*get_sram_addrs)(void); |
57 | void (*save_context)(void); |
58 | void (*restore_context)(void); |
59 | int (*check_off_mode_enable)(void); |
60 | }; |
61 | |
62 | struct am33xx_pm_sram_data { |
63 | u32 wfi_flags; |
64 | u32 l2_aux_ctrl_val; |
65 | u32 l2_prefetch_ctrl_val; |
66 | } __packed __aligned(8); |
67 | |
68 | struct am33xx_pm_ro_sram_data { |
69 | u32 amx3_pm_sram_data_virt; |
70 | u32 amx3_pm_sram_data_phys; |
71 | void __iomem *rtc_base_virt; |
72 | } __packed __aligned(8); |
73 | |
74 | #endif /* __ASSEMBLER__ */ |
75 | #endif /* _LINUX_PLATFORM_DATA_PM33XX_H */ |
76 | |