| 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | // Copyright(c) 2019-2020 Intel Corporation. |
| 3 | |
| 4 | /* |
| 5 | * Intel SOF Machine Driver with Realtek rt5682 Codec |
| 6 | * and speaker codec MAX98357A or RT1015. |
| 7 | */ |
| 8 | #include <linux/i2c.h> |
| 9 | #include <linux/input.h> |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/platform_device.h> |
| 12 | #include <linux/clk.h> |
| 13 | #include <linux/dmi.h> |
| 14 | #include <sound/core.h> |
| 15 | #include <sound/jack.h> |
| 16 | #include <sound/pcm.h> |
| 17 | #include <sound/pcm_params.h> |
| 18 | #include <sound/soc.h> |
| 19 | #include <sound/sof.h> |
| 20 | #include <sound/rt5682.h> |
| 21 | #include <sound/rt5682s.h> |
| 22 | #include <sound/soc-acpi.h> |
| 23 | #include "../../codecs/rt5682.h" |
| 24 | #include "../../codecs/rt5682s.h" |
| 25 | #include "../../codecs/rt5645.h" |
| 26 | #include "../common/soc-intel-quirks.h" |
| 27 | #include "sof_board_helpers.h" |
| 28 | #include "sof_maxim_common.h" |
| 29 | #include "sof_realtek_common.h" |
| 30 | |
| 31 | /* Driver-specific board quirks: from bit 0 to 7 */ |
| 32 | #define SOF_RT5682_MCLK_EN BIT(0) |
| 33 | |
| 34 | /* Default: MCLK on, MCLK 19.2M, SSP0 */ |
| 35 | static unsigned long sof_rt5682_quirk = SOF_RT5682_MCLK_EN | |
| 36 | SOF_SSP_PORT_CODEC(0); |
| 37 | |
| 38 | static int quirk_override = -1; |
| 39 | module_param_named(quirk, quirk_override, int, 0444); |
| 40 | MODULE_PARM_DESC(quirk, "Board-specific quirk override" ); |
| 41 | |
| 42 | static int sof_rt5682_quirk_cb(const struct dmi_system_id *id) |
| 43 | { |
| 44 | sof_rt5682_quirk = (unsigned long)id->driver_data; |
| 45 | return 1; |
| 46 | } |
| 47 | |
| 48 | static const struct dmi_system_id sof_rt5682_quirk_table[] = { |
| 49 | { |
| 50 | .callback = sof_rt5682_quirk_cb, |
| 51 | .matches = { |
| 52 | DMI_MATCH(DMI_SYS_VENDOR, "Circuitco" ), |
| 53 | DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max" ), |
| 54 | }, |
| 55 | .driver_data = (void *)(SOF_SSP_PORT_CODEC(2)), |
| 56 | }, |
| 57 | { |
| 58 | .callback = sof_rt5682_quirk_cb, |
| 59 | .matches = { |
| 60 | DMI_MATCH(DMI_SYS_VENDOR, "AAEON" ), |
| 61 | DMI_MATCH(DMI_PRODUCT_NAME, "UP-CHT01" ), |
| 62 | }, |
| 63 | .driver_data = (void *)(SOF_SSP_PORT_CODEC(2)), |
| 64 | }, |
| 65 | { |
| 66 | .callback = sof_rt5682_quirk_cb, |
| 67 | .matches = { |
| 68 | DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation" ), |
| 69 | DMI_MATCH(DMI_PRODUCT_NAME, "WhiskeyLake Client" ), |
| 70 | }, |
| 71 | .driver_data = (void *)(SOF_RT5682_MCLK_EN | |
| 72 | SOF_SSP_PORT_CODEC(1)), |
| 73 | }, |
| 74 | { |
| 75 | .callback = sof_rt5682_quirk_cb, |
| 76 | .matches = { |
| 77 | DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Volteer" ), |
| 78 | DMI_MATCH(DMI_OEM_STRING, "AUDIO-MAX98373_ALC5682I_I2S_UP4" ), |
| 79 | }, |
| 80 | .driver_data = (void *)(SOF_RT5682_MCLK_EN | |
| 81 | SOF_SSP_PORT_CODEC(0) | |
| 82 | SOF_SSP_PORT_AMP(2) | |
| 83 | SOF_NUM_IDISP_HDMI(4)), |
| 84 | }, |
| 85 | { |
| 86 | .callback = sof_rt5682_quirk_cb, |
| 87 | .matches = { |
| 88 | DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation" ), |
| 89 | DMI_MATCH(DMI_PRODUCT_NAME, "Alder Lake Client Platform" ), |
| 90 | DMI_MATCH(DMI_OEM_STRING, "AUDIO-ADL_MAX98373_ALC5682I_I2S" ), |
| 91 | }, |
| 92 | .driver_data = (void *)(SOF_RT5682_MCLK_EN | |
| 93 | SOF_SSP_PORT_CODEC(0) | |
| 94 | SOF_SSP_PORT_AMP(2) | |
| 95 | SOF_NUM_IDISP_HDMI(4)), |
| 96 | }, |
| 97 | { |
| 98 | .callback = sof_rt5682_quirk_cb, |
| 99 | .matches = { |
| 100 | DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Brya" ), |
| 101 | DMI_MATCH(DMI_OEM_STRING, "AUDIO-MAX98390_ALC5682I_I2S" ), |
| 102 | }, |
| 103 | .driver_data = (void *)(SOF_RT5682_MCLK_EN | |
| 104 | SOF_SSP_PORT_CODEC(0) | |
| 105 | SOF_SSP_PORT_AMP(2) | |
| 106 | SOF_NUM_IDISP_HDMI(4)), |
| 107 | }, |
| 108 | { |
| 109 | .callback = sof_rt5682_quirk_cb, |
| 110 | .matches = { |
| 111 | DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Brya" ), |
| 112 | DMI_MATCH(DMI_OEM_STRING, "AUDIO-MAX98360_ALC5682I_I2S_AMP_SSP2" ), |
| 113 | }, |
| 114 | .driver_data = (void *)(SOF_RT5682_MCLK_EN | |
| 115 | SOF_SSP_PORT_CODEC(0) | |
| 116 | SOF_SSP_PORT_AMP(2) | |
| 117 | SOF_NUM_IDISP_HDMI(4)), |
| 118 | }, |
| 119 | { |
| 120 | .callback = sof_rt5682_quirk_cb, |
| 121 | .matches = { |
| 122 | DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Rex" ), |
| 123 | }, |
| 124 | .driver_data = (void *)(SOF_RT5682_MCLK_EN | |
| 125 | SOF_SSP_PORT_CODEC(2) | |
| 126 | SOF_SSP_PORT_AMP(0) | |
| 127 | SOF_SSP_PORT_BT_OFFLOAD(1) | |
| 128 | SOF_BT_OFFLOAD_PRESENT |
| 129 | ), |
| 130 | }, |
| 131 | {} |
| 132 | }; |
| 133 | |
| 134 | static struct snd_soc_jack_pin jack_pins[] = { |
| 135 | { |
| 136 | .pin = "Headphone Jack" , |
| 137 | .mask = SND_JACK_HEADPHONE, |
| 138 | }, |
| 139 | { |
| 140 | .pin = "Headset Mic" , |
| 141 | .mask = SND_JACK_MICROPHONE, |
| 142 | }, |
| 143 | }; |
| 144 | |
| 145 | static int sof_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd) |
| 146 | { |
| 147 | struct sof_card_private *ctx = snd_soc_card_get_drvdata(card: rtd->card); |
| 148 | struct snd_soc_component *component = snd_soc_rtd_to_codec(rtd, 0)->component; |
| 149 | struct snd_soc_jack *jack = &ctx->headset_jack; |
| 150 | int ; |
| 151 | int ret, mclk_freq; |
| 152 | |
| 153 | if (ctx->rt5682.mclk_en) { |
| 154 | mclk_freq = sof_dai_get_mclk(rtd); |
| 155 | if (mclk_freq <= 0) { |
| 156 | dev_err(rtd->dev, "invalid mclk freq %d\n" , mclk_freq); |
| 157 | return -EINVAL; |
| 158 | } |
| 159 | |
| 160 | /* need to enable ASRC function for 24MHz mclk rate */ |
| 161 | if (mclk_freq == 24000000) { |
| 162 | dev_info(rtd->dev, "enable ASRC\n" ); |
| 163 | |
| 164 | switch (ctx->codec_type) { |
| 165 | case CODEC_RT5650: |
| 166 | rt5645_sel_asrc_clk_src(component, |
| 167 | filter_mask: RT5645_DA_STEREO_FILTER | |
| 168 | RT5645_AD_STEREO_FILTER, |
| 169 | RT5645_CLK_SEL_I2S1_ASRC); |
| 170 | rt5645_sel_asrc_clk_src(component, |
| 171 | filter_mask: RT5645_DA_MONO_L_FILTER | |
| 172 | RT5645_DA_MONO_R_FILTER, |
| 173 | RT5645_CLK_SEL_I2S2_ASRC); |
| 174 | break; |
| 175 | case CODEC_RT5682: |
| 176 | rt5682_sel_asrc_clk_src(component, |
| 177 | filter_mask: RT5682_DA_STEREO1_FILTER | |
| 178 | RT5682_AD_STEREO1_FILTER, |
| 179 | clk_src: RT5682_CLK_SEL_I2S1_ASRC); |
| 180 | break; |
| 181 | case CODEC_RT5682S: |
| 182 | rt5682s_sel_asrc_clk_src(component, |
| 183 | filter_mask: RT5682S_DA_STEREO1_FILTER | |
| 184 | RT5682S_AD_STEREO1_FILTER, |
| 185 | clk_src: RT5682S_CLK_SEL_I2S1_ASRC); |
| 186 | break; |
| 187 | default: |
| 188 | dev_err(rtd->dev, "invalid codec type %d\n" , |
| 189 | ctx->codec_type); |
| 190 | return -EINVAL; |
| 191 | } |
| 192 | } |
| 193 | |
| 194 | if (ctx->rt5682.is_legacy_cpu) { |
| 195 | /* |
| 196 | * The firmware might enable the clock at |
| 197 | * boot (this information may or may not |
| 198 | * be reflected in the enable clock register). |
| 199 | * To change the rate we must disable the clock |
| 200 | * first to cover these cases. Due to common |
| 201 | * clock framework restrictions that do not allow |
| 202 | * to disable a clock that has not been enabled, |
| 203 | * we need to enable the clock first. |
| 204 | */ |
| 205 | ret = clk_prepare_enable(clk: ctx->rt5682.mclk); |
| 206 | if (!ret) |
| 207 | clk_disable_unprepare(clk: ctx->rt5682.mclk); |
| 208 | |
| 209 | ret = clk_set_rate(clk: ctx->rt5682.mclk, rate: 19200000); |
| 210 | |
| 211 | if (ret) |
| 212 | dev_err(rtd->dev, "unable to set MCLK rate\n" ); |
| 213 | } |
| 214 | } |
| 215 | |
| 216 | /* |
| 217 | * Headset buttons map to the google Reference headset. |
| 218 | * These can be configured by userspace. |
| 219 | */ |
| 220 | ret = snd_soc_card_jack_new_pins(card: rtd->card, id: "Headset Jack" , |
| 221 | type: SND_JACK_HEADSET | SND_JACK_BTN_0 | |
| 222 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | |
| 223 | SND_JACK_BTN_3, |
| 224 | jack, |
| 225 | pins: jack_pins, |
| 226 | ARRAY_SIZE(jack_pins)); |
| 227 | if (ret) { |
| 228 | dev_err(rtd->dev, "Headset Jack creation failed: %d\n" , ret); |
| 229 | return ret; |
| 230 | } |
| 231 | |
| 232 | snd_jack_set_key(jack: jack->jack, type: SND_JACK_BTN_0, KEY_PLAYPAUSE); |
| 233 | snd_jack_set_key(jack: jack->jack, type: SND_JACK_BTN_1, KEY_VOICECOMMAND); |
| 234 | snd_jack_set_key(jack: jack->jack, type: SND_JACK_BTN_2, KEY_VOLUMEUP); |
| 235 | snd_jack_set_key(jack: jack->jack, type: SND_JACK_BTN_3, KEY_VOLUMEDOWN); |
| 236 | |
| 237 | if (ctx->codec_type == CODEC_RT5650) { |
| 238 | extra_jack_data = SND_JACK_MICROPHONE | SND_JACK_BTN_0; |
| 239 | ret = snd_soc_component_set_jack(component, jack, data: &extra_jack_data); |
| 240 | } else |
| 241 | ret = snd_soc_component_set_jack(component, jack, NULL); |
| 242 | |
| 243 | if (ret) { |
| 244 | dev_err(rtd->dev, "Headset Jack call-back failed: %d\n" , ret); |
| 245 | return ret; |
| 246 | } |
| 247 | |
| 248 | return ret; |
| 249 | }; |
| 250 | |
| 251 | static void sof_rt5682_codec_exit(struct snd_soc_pcm_runtime *rtd) |
| 252 | { |
| 253 | struct snd_soc_component *component = snd_soc_rtd_to_codec(rtd, 0)->component; |
| 254 | |
| 255 | snd_soc_component_set_jack(component, NULL, NULL); |
| 256 | } |
| 257 | |
| 258 | static int sof_rt5682_hw_params(struct snd_pcm_substream *substream, |
| 259 | struct snd_pcm_hw_params *params) |
| 260 | { |
| 261 | struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); |
| 262 | struct sof_card_private *ctx = snd_soc_card_get_drvdata(card: rtd->card); |
| 263 | struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0); |
| 264 | int pll_id, pll_source, pll_in, pll_out, clk_id, ret; |
| 265 | |
| 266 | if (ctx->rt5682.mclk_en) { |
| 267 | if (ctx->rt5682.is_legacy_cpu) { |
| 268 | ret = clk_prepare_enable(clk: ctx->rt5682.mclk); |
| 269 | if (ret < 0) { |
| 270 | dev_err(rtd->dev, |
| 271 | "could not configure MCLK state" ); |
| 272 | return ret; |
| 273 | } |
| 274 | } |
| 275 | |
| 276 | switch (ctx->codec_type) { |
| 277 | case CODEC_RT5650: |
| 278 | pll_source = RT5645_PLL1_S_MCLK; |
| 279 | break; |
| 280 | case CODEC_RT5682: |
| 281 | pll_source = RT5682_PLL1_S_MCLK; |
| 282 | break; |
| 283 | case CODEC_RT5682S: |
| 284 | pll_source = RT5682S_PLL_S_MCLK; |
| 285 | break; |
| 286 | default: |
| 287 | dev_err(rtd->dev, "invalid codec type %d\n" , |
| 288 | ctx->codec_type); |
| 289 | return -EINVAL; |
| 290 | } |
| 291 | |
| 292 | /* get the tplg configured mclk. */ |
| 293 | pll_in = sof_dai_get_mclk(rtd); |
| 294 | if (pll_in <= 0) { |
| 295 | dev_err(rtd->dev, "invalid mclk freq %d\n" , pll_in); |
| 296 | return -EINVAL; |
| 297 | } |
| 298 | } else { |
| 299 | switch (ctx->codec_type) { |
| 300 | case CODEC_RT5650: |
| 301 | pll_source = RT5645_PLL1_S_BCLK1; |
| 302 | break; |
| 303 | case CODEC_RT5682: |
| 304 | pll_source = RT5682_PLL1_S_BCLK1; |
| 305 | break; |
| 306 | case CODEC_RT5682S: |
| 307 | pll_source = RT5682S_PLL_S_BCLK1; |
| 308 | break; |
| 309 | default: |
| 310 | dev_err(rtd->dev, "invalid codec type %d\n" , |
| 311 | ctx->codec_type); |
| 312 | return -EINVAL; |
| 313 | } |
| 314 | |
| 315 | /* get the tplg configured bclk. */ |
| 316 | pll_in = sof_dai_get_bclk(rtd); |
| 317 | if (pll_in <= 0) { |
| 318 | dev_err(rtd->dev, "invalid bclk freq %d\n" , pll_in); |
| 319 | return -EINVAL; |
| 320 | } |
| 321 | } |
| 322 | |
| 323 | pll_out = params_rate(p: params) * 512; |
| 324 | |
| 325 | /* when MCLK is 512FS, no need to set PLL configuration additionally. */ |
| 326 | if (pll_in == pll_out) { |
| 327 | switch (ctx->codec_type) { |
| 328 | case CODEC_RT5650: |
| 329 | clk_id = RT5645_SCLK_S_MCLK; |
| 330 | break; |
| 331 | case CODEC_RT5682: |
| 332 | clk_id = RT5682_SCLK_S_MCLK; |
| 333 | break; |
| 334 | case CODEC_RT5682S: |
| 335 | clk_id = RT5682S_SCLK_S_MCLK; |
| 336 | break; |
| 337 | default: |
| 338 | dev_err(rtd->dev, "invalid codec type %d\n" , |
| 339 | ctx->codec_type); |
| 340 | return -EINVAL; |
| 341 | } |
| 342 | } else { |
| 343 | switch (ctx->codec_type) { |
| 344 | case CODEC_RT5650: |
| 345 | pll_id = 0; /* not used in codec driver */ |
| 346 | clk_id = RT5645_SCLK_S_PLL1; |
| 347 | break; |
| 348 | case CODEC_RT5682: |
| 349 | pll_id = RT5682_PLL1; |
| 350 | clk_id = RT5682_SCLK_S_PLL1; |
| 351 | break; |
| 352 | case CODEC_RT5682S: |
| 353 | /* check plla_table and pllb_table in rt5682s.c */ |
| 354 | switch (pll_in) { |
| 355 | case 3072000: |
| 356 | case 24576000: |
| 357 | /* |
| 358 | * For MCLK = 24.576MHz and sample rate = 96KHz case, use PLL1 We don't test |
| 359 | * pll_out or params_rate() here since rt5682s PLL2 doesn't support 24.576MHz |
| 360 | * input, so we have no choice but to use PLL1. Besides, we will not use PLL at |
| 361 | * all if pll_in == pll_out. ex, MCLK = 24.576Mhz and sample rate = 48KHz |
| 362 | */ |
| 363 | pll_id = RT5682S_PLL1; |
| 364 | clk_id = RT5682S_SCLK_S_PLL1; |
| 365 | break; |
| 366 | default: |
| 367 | pll_id = RT5682S_PLL2; |
| 368 | clk_id = RT5682S_SCLK_S_PLL2; |
| 369 | break; |
| 370 | } |
| 371 | break; |
| 372 | default: |
| 373 | dev_err(rtd->dev, "invalid codec type %d\n" , ctx->codec_type); |
| 374 | return -EINVAL; |
| 375 | } |
| 376 | |
| 377 | /* Configure pll for codec */ |
| 378 | ret = snd_soc_dai_set_pll(dai: codec_dai, pll_id, source: pll_source, freq_in: pll_in, |
| 379 | freq_out: pll_out); |
| 380 | if (ret < 0) |
| 381 | dev_err(rtd->dev, "snd_soc_dai_set_pll err = %d\n" , ret); |
| 382 | } |
| 383 | |
| 384 | /* Configure sysclk for codec */ |
| 385 | ret = snd_soc_dai_set_sysclk(dai: codec_dai, clk_id, |
| 386 | freq: pll_out, SND_SOC_CLOCK_IN); |
| 387 | if (ret < 0) |
| 388 | dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n" , ret); |
| 389 | |
| 390 | /* |
| 391 | * slot_width should equal or large than data length, set them |
| 392 | * be the same |
| 393 | */ |
| 394 | ret = snd_soc_dai_set_tdm_slot(dai: codec_dai, tx_mask: 0x0, rx_mask: 0x0, slots: 2, |
| 395 | slot_width: params_width(p: params)); |
| 396 | if (ret < 0) { |
| 397 | dev_err(rtd->dev, "set TDM slot err:%d\n" , ret); |
| 398 | return ret; |
| 399 | } |
| 400 | |
| 401 | return ret; |
| 402 | } |
| 403 | |
| 404 | static const struct snd_soc_ops sof_rt5682_ops = { |
| 405 | .hw_params = sof_rt5682_hw_params, |
| 406 | }; |
| 407 | |
| 408 | static int sof_card_late_probe(struct snd_soc_card *card) |
| 409 | { |
| 410 | struct sof_card_private *ctx = snd_soc_card_get_drvdata(card); |
| 411 | struct snd_soc_dapm_context *dapm = snd_soc_card_to_dapm(card); |
| 412 | int err; |
| 413 | |
| 414 | if (ctx->amp_type == CODEC_MAX98373) { |
| 415 | /* Disable Left and Right Spk pin after boot */ |
| 416 | snd_soc_dapm_disable_pin(dapm, pin: "Left Spk" ); |
| 417 | snd_soc_dapm_disable_pin(dapm, pin: "Right Spk" ); |
| 418 | err = snd_soc_dapm_sync(dapm); |
| 419 | if (err < 0) |
| 420 | return err; |
| 421 | } |
| 422 | |
| 423 | return sof_intel_board_card_late_probe(card); |
| 424 | } |
| 425 | |
| 426 | static const struct snd_kcontrol_new sof_controls[] = { |
| 427 | SOC_DAPM_PIN_SWITCH("Headphone Jack" ), |
| 428 | SOC_DAPM_PIN_SWITCH("Headset Mic" ), |
| 429 | }; |
| 430 | |
| 431 | static const struct snd_soc_dapm_widget sof_widgets[] = { |
| 432 | SND_SOC_DAPM_HP("Headphone Jack" , NULL), |
| 433 | SND_SOC_DAPM_MIC("Headset Mic" , NULL), |
| 434 | }; |
| 435 | |
| 436 | static const struct snd_soc_dapm_route sof_map[] = { |
| 437 | /* HP jack connectors - unknown if we have jack detection */ |
| 438 | { "Headphone Jack" , NULL, "HPOL" }, |
| 439 | { "Headphone Jack" , NULL, "HPOR" }, |
| 440 | |
| 441 | /* other jacks */ |
| 442 | { "IN1P" , NULL, "Headset Mic" }, |
| 443 | }; |
| 444 | |
| 445 | static const struct snd_kcontrol_new rt5650_spk_kcontrols[] = { |
| 446 | SOC_DAPM_PIN_SWITCH("Left Spk" ), |
| 447 | SOC_DAPM_PIN_SWITCH("Right Spk" ), |
| 448 | |
| 449 | }; |
| 450 | |
| 451 | static const struct snd_soc_dapm_widget rt5650_spk_widgets[] = { |
| 452 | SND_SOC_DAPM_SPK("Left Spk" , NULL), |
| 453 | SND_SOC_DAPM_SPK("Right Spk" , NULL), |
| 454 | }; |
| 455 | |
| 456 | static const struct snd_soc_dapm_route rt5650_spk_dapm_routes[] = { |
| 457 | /* speaker */ |
| 458 | { "Left Spk" , NULL, "SPOL" }, |
| 459 | { "Right Spk" , NULL, "SPOR" }, |
| 460 | }; |
| 461 | |
| 462 | static int rt5650_spk_init(struct snd_soc_pcm_runtime *rtd) |
| 463 | { |
| 464 | struct snd_soc_card *card = rtd->card; |
| 465 | struct snd_soc_dapm_context *dapm = snd_soc_card_to_dapm(card); |
| 466 | int ret; |
| 467 | |
| 468 | ret = snd_soc_dapm_new_controls(dapm, widget: rt5650_spk_widgets, |
| 469 | ARRAY_SIZE(rt5650_spk_widgets)); |
| 470 | if (ret) { |
| 471 | dev_err(rtd->dev, "fail to add rt5650 spk widgets, ret %d\n" , |
| 472 | ret); |
| 473 | return ret; |
| 474 | } |
| 475 | |
| 476 | ret = snd_soc_add_card_controls(soc_card: card, controls: rt5650_spk_kcontrols, |
| 477 | ARRAY_SIZE(rt5650_spk_kcontrols)); |
| 478 | if (ret) { |
| 479 | dev_err(rtd->dev, "fail to add rt5650 spk kcontrols, ret %d\n" , |
| 480 | ret); |
| 481 | return ret; |
| 482 | } |
| 483 | |
| 484 | ret = snd_soc_dapm_add_routes(dapm, route: rt5650_spk_dapm_routes, |
| 485 | ARRAY_SIZE(rt5650_spk_dapm_routes)); |
| 486 | if (ret) |
| 487 | dev_err(rtd->dev, "fail to add dapm routes, ret=%d\n" , ret); |
| 488 | |
| 489 | return ret; |
| 490 | } |
| 491 | |
| 492 | /* sof audio machine driver for rt5682 codec */ |
| 493 | static struct snd_soc_card sof_audio_card_rt5682 = { |
| 494 | .name = "rt5682" , /* the sof- prefix is added by the core */ |
| 495 | .owner = THIS_MODULE, |
| 496 | .controls = sof_controls, |
| 497 | .num_controls = ARRAY_SIZE(sof_controls), |
| 498 | .dapm_widgets = sof_widgets, |
| 499 | .num_dapm_widgets = ARRAY_SIZE(sof_widgets), |
| 500 | .dapm_routes = sof_map, |
| 501 | .num_dapm_routes = ARRAY_SIZE(sof_map), |
| 502 | .fully_routed = true, |
| 503 | .late_probe = sof_card_late_probe, |
| 504 | }; |
| 505 | |
| 506 | static struct snd_soc_dai_link_component rt5682_component[] = { |
| 507 | { |
| 508 | .name = "i2c-10EC5682:00" , |
| 509 | .dai_name = "rt5682-aif1" , |
| 510 | } |
| 511 | }; |
| 512 | |
| 513 | static struct snd_soc_dai_link_component rt5682s_component[] = { |
| 514 | { |
| 515 | .name = "i2c-RTL5682:00" , |
| 516 | .dai_name = "rt5682s-aif1" , |
| 517 | } |
| 518 | }; |
| 519 | |
| 520 | static struct snd_soc_dai_link_component rt5650_components[] = { |
| 521 | { |
| 522 | .name = "i2c-10EC5650:00" , |
| 523 | .dai_name = "rt5645-aif1" , |
| 524 | }, |
| 525 | { |
| 526 | .name = "i2c-10EC5650:00" , |
| 527 | .dai_name = "rt5645-aif2" , |
| 528 | } |
| 529 | }; |
| 530 | |
| 531 | static int |
| 532 | sof_card_dai_links_create(struct device *dev, struct snd_soc_card *card, |
| 533 | struct sof_card_private *ctx) |
| 534 | { |
| 535 | int ret; |
| 536 | |
| 537 | ret = sof_intel_board_set_dai_link(dev, card, ctx); |
| 538 | if (ret) |
| 539 | return ret; |
| 540 | |
| 541 | if (!ctx->codec_link) { |
| 542 | dev_err(dev, "codec link not available" ); |
| 543 | return -EINVAL; |
| 544 | } |
| 545 | |
| 546 | /* codec-specific fields for headphone codec */ |
| 547 | switch (ctx->codec_type) { |
| 548 | case CODEC_RT5650: |
| 549 | ctx->codec_link->codecs = &rt5650_components[0]; |
| 550 | ctx->codec_link->num_codecs = 1; |
| 551 | break; |
| 552 | case CODEC_RT5682: |
| 553 | ctx->codec_link->codecs = rt5682_component; |
| 554 | ctx->codec_link->num_codecs = ARRAY_SIZE(rt5682_component); |
| 555 | break; |
| 556 | case CODEC_RT5682S: |
| 557 | ctx->codec_link->codecs = rt5682s_component; |
| 558 | ctx->codec_link->num_codecs = ARRAY_SIZE(rt5682s_component); |
| 559 | break; |
| 560 | default: |
| 561 | dev_err(dev, "invalid codec type %d\n" , ctx->codec_type); |
| 562 | return -EINVAL; |
| 563 | } |
| 564 | |
| 565 | ctx->codec_link->init = sof_rt5682_codec_init; |
| 566 | ctx->codec_link->exit = sof_rt5682_codec_exit; |
| 567 | ctx->codec_link->ops = &sof_rt5682_ops; |
| 568 | |
| 569 | if (!ctx->rt5682.is_legacy_cpu) { |
| 570 | /* |
| 571 | * Currently, On SKL+ platforms MCLK will be turned off in sof |
| 572 | * runtime suspended, and it will go into runtime suspended |
| 573 | * right after playback is stop. However, rt5682 will output |
| 574 | * static noise if sysclk turns off during playback. Set |
| 575 | * ignore_pmdown_time to power down rt5682 immediately and |
| 576 | * avoid the noise. |
| 577 | * It can be removed once we can control MCLK by driver. |
| 578 | */ |
| 579 | ctx->codec_link->ignore_pmdown_time = 1; |
| 580 | } |
| 581 | |
| 582 | if (ctx->amp_type == CODEC_NONE) |
| 583 | return 0; |
| 584 | |
| 585 | if (!ctx->amp_link) { |
| 586 | dev_err(dev, "amp link not available" ); |
| 587 | return -EINVAL; |
| 588 | } |
| 589 | |
| 590 | /* codec-specific fields for speaker amplifier */ |
| 591 | switch (ctx->amp_type) { |
| 592 | case CODEC_MAX98357A: |
| 593 | max_98357a_dai_link(link: ctx->amp_link); |
| 594 | break; |
| 595 | case CODEC_MAX98360A: |
| 596 | max_98360a_dai_link(link: ctx->amp_link); |
| 597 | break; |
| 598 | case CODEC_MAX98373: |
| 599 | max_98373_dai_link(dev, link: ctx->amp_link); |
| 600 | break; |
| 601 | case CODEC_MAX98390: |
| 602 | max_98390_dai_link(dev, link: ctx->amp_link); |
| 603 | break; |
| 604 | case CODEC_RT1011: |
| 605 | sof_rt1011_dai_link(dev, link: ctx->amp_link); |
| 606 | break; |
| 607 | case CODEC_RT1015: |
| 608 | sof_rt1015_dai_link(link: ctx->amp_link); |
| 609 | break; |
| 610 | case CODEC_RT1015P: |
| 611 | sof_rt1015p_dai_link(link: ctx->amp_link); |
| 612 | break; |
| 613 | case CODEC_RT1019P: |
| 614 | sof_rt1019p_dai_link(link: ctx->amp_link); |
| 615 | break; |
| 616 | case CODEC_RT5650: |
| 617 | /* use AIF2 to support speaker pipeline */ |
| 618 | ctx->amp_link->codecs = &rt5650_components[1]; |
| 619 | ctx->amp_link->num_codecs = 1; |
| 620 | ctx->amp_link->init = rt5650_spk_init; |
| 621 | ctx->amp_link->ops = &sof_rt5682_ops; |
| 622 | break; |
| 623 | default: |
| 624 | dev_err(dev, "invalid amp type %d\n" , ctx->amp_type); |
| 625 | return -EINVAL; |
| 626 | } |
| 627 | |
| 628 | return 0; |
| 629 | } |
| 630 | |
| 631 | #define GLK_LINK_ORDER SOF_LINK_ORDER(SOF_LINK_AMP, \ |
| 632 | SOF_LINK_CODEC, \ |
| 633 | SOF_LINK_DMIC01, \ |
| 634 | SOF_LINK_IDISP_HDMI, \ |
| 635 | SOF_LINK_NONE, \ |
| 636 | SOF_LINK_NONE, \ |
| 637 | SOF_LINK_NONE) |
| 638 | |
| 639 | static int sof_audio_probe(struct platform_device *pdev) |
| 640 | { |
| 641 | struct snd_soc_acpi_mach *mach = pdev->dev.platform_data; |
| 642 | struct sof_card_private *ctx; |
| 643 | char *card_name; |
| 644 | int ret; |
| 645 | |
| 646 | if (pdev->id_entry && pdev->id_entry->driver_data) |
| 647 | sof_rt5682_quirk = (unsigned long)pdev->id_entry->driver_data; |
| 648 | |
| 649 | dmi_check_system(list: sof_rt5682_quirk_table); |
| 650 | |
| 651 | if (quirk_override != -1) { |
| 652 | dev_info(&pdev->dev, "Overriding quirk 0x%lx => 0x%x\n" , |
| 653 | sof_rt5682_quirk, quirk_override); |
| 654 | sof_rt5682_quirk = quirk_override; |
| 655 | } |
| 656 | |
| 657 | dev_dbg(&pdev->dev, "sof_rt5682_quirk = %lx\n" , sof_rt5682_quirk); |
| 658 | |
| 659 | /* initialize ctx with board quirk */ |
| 660 | ctx = sof_intel_board_get_ctx(dev: &pdev->dev, board_quirk: sof_rt5682_quirk); |
| 661 | if (!ctx) |
| 662 | return -ENOMEM; |
| 663 | |
| 664 | if (ctx->codec_type == CODEC_RT5650) { |
| 665 | card_name = devm_kstrdup(dev: &pdev->dev, s: "rt5650" , GFP_KERNEL); |
| 666 | if (!card_name) |
| 667 | return -ENOMEM; |
| 668 | |
| 669 | sof_audio_card_rt5682.name = card_name; |
| 670 | |
| 671 | /* create speaker dai link also */ |
| 672 | if (ctx->amp_type == CODEC_NONE) |
| 673 | ctx->amp_type = CODEC_RT5650; |
| 674 | } |
| 675 | |
| 676 | if (mach->mach_params.codec_mask & IDISP_CODEC_MASK) |
| 677 | ctx->hdmi.idisp_codec = true; |
| 678 | |
| 679 | if (soc_intel_is_byt() || soc_intel_is_cht()) { |
| 680 | ctx->rt5682.is_legacy_cpu = true; |
| 681 | ctx->dmic_be_num = 0; |
| 682 | /* HDMI is not supported by SOF on Baytrail/CherryTrail */ |
| 683 | ctx->hdmi_num = 0; |
| 684 | } else if (soc_intel_is_glk()) { |
| 685 | /* dmic16k not support */ |
| 686 | ctx->dmic_be_num = 1; |
| 687 | |
| 688 | /* overwrite the DAI link order for GLK boards */ |
| 689 | ctx->link_order_overwrite = GLK_LINK_ORDER; |
| 690 | |
| 691 | /* backward-compatible with existing devices */ |
| 692 | switch (ctx->amp_type) { |
| 693 | case CODEC_MAX98357A: |
| 694 | card_name = devm_kstrdup(dev: &pdev->dev, s: "glkrt5682max" , |
| 695 | GFP_KERNEL); |
| 696 | if (!card_name) |
| 697 | return -ENOMEM; |
| 698 | |
| 699 | sof_audio_card_rt5682.name = card_name; |
| 700 | break; |
| 701 | default: |
| 702 | break; |
| 703 | } |
| 704 | } else if (soc_intel_is_cml()) { |
| 705 | /* backward-compatible with existing devices */ |
| 706 | switch (ctx->amp_type) { |
| 707 | case CODEC_RT1011: |
| 708 | card_name = devm_kstrdup(dev: &pdev->dev, s: "cml_rt1011_rt5682" , |
| 709 | GFP_KERNEL); |
| 710 | if (!card_name) |
| 711 | return -ENOMEM; |
| 712 | |
| 713 | sof_audio_card_rt5682.name = card_name; |
| 714 | break; |
| 715 | default: |
| 716 | break; |
| 717 | } |
| 718 | } |
| 719 | |
| 720 | if (sof_rt5682_quirk & SOF_RT5682_MCLK_EN) { |
| 721 | ctx->rt5682.mclk_en = true; |
| 722 | |
| 723 | /* need to get main clock from pmc */ |
| 724 | if (ctx->rt5682.is_legacy_cpu) { |
| 725 | ctx->rt5682.mclk = devm_clk_get(dev: &pdev->dev, id: "pmc_plt_clk_3" ); |
| 726 | if (IS_ERR(ptr: ctx->rt5682.mclk)) { |
| 727 | ret = PTR_ERR(ptr: ctx->rt5682.mclk); |
| 728 | |
| 729 | dev_err(&pdev->dev, |
| 730 | "Failed to get MCLK from pmc_plt_clk_3: %d\n" , |
| 731 | ret); |
| 732 | return ret; |
| 733 | } |
| 734 | |
| 735 | ret = clk_prepare_enable(clk: ctx->rt5682.mclk); |
| 736 | if (ret < 0) { |
| 737 | dev_err(&pdev->dev, |
| 738 | "could not configure MCLK state" ); |
| 739 | return ret; |
| 740 | } |
| 741 | } |
| 742 | } |
| 743 | |
| 744 | /* update dai_link */ |
| 745 | ret = sof_card_dai_links_create(dev: &pdev->dev, card: &sof_audio_card_rt5682, ctx); |
| 746 | if (ret) |
| 747 | return ret; |
| 748 | |
| 749 | /* update codec_conf */ |
| 750 | switch (ctx->amp_type) { |
| 751 | case CODEC_MAX98373: |
| 752 | max_98373_set_codec_conf(card: &sof_audio_card_rt5682); |
| 753 | break; |
| 754 | case CODEC_MAX98390: |
| 755 | max_98390_set_codec_conf(dev: &pdev->dev, card: &sof_audio_card_rt5682); |
| 756 | break; |
| 757 | case CODEC_RT1011: |
| 758 | sof_rt1011_codec_conf(dev: &pdev->dev, card: &sof_audio_card_rt5682); |
| 759 | break; |
| 760 | case CODEC_RT1015: |
| 761 | sof_rt1015_codec_conf(card: &sof_audio_card_rt5682); |
| 762 | break; |
| 763 | case CODEC_RT1015P: |
| 764 | sof_rt1015p_codec_conf(card: &sof_audio_card_rt5682); |
| 765 | break; |
| 766 | case CODEC_MAX98357A: |
| 767 | case CODEC_MAX98360A: |
| 768 | case CODEC_RT1019P: |
| 769 | case CODEC_RT5650: |
| 770 | case CODEC_NONE: |
| 771 | /* no codec conf required */ |
| 772 | break; |
| 773 | default: |
| 774 | dev_err(&pdev->dev, "invalid amp type %d\n" , ctx->amp_type); |
| 775 | return -EINVAL; |
| 776 | } |
| 777 | |
| 778 | sof_audio_card_rt5682.dev = &pdev->dev; |
| 779 | |
| 780 | /* set platform name for each dailink */ |
| 781 | ret = snd_soc_fixup_dai_links_platform_name(card: &sof_audio_card_rt5682, |
| 782 | platform_name: mach->mach_params.platform); |
| 783 | if (ret) |
| 784 | return ret; |
| 785 | |
| 786 | snd_soc_card_set_drvdata(card: &sof_audio_card_rt5682, data: ctx); |
| 787 | |
| 788 | return devm_snd_soc_register_card(dev: &pdev->dev, |
| 789 | card: &sof_audio_card_rt5682); |
| 790 | } |
| 791 | |
| 792 | static const struct platform_device_id board_ids[] = { |
| 793 | { |
| 794 | .name = "sof_rt5682" , |
| 795 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 796 | SOF_SSP_PORT_CODEC(2)), |
| 797 | }, |
| 798 | { |
| 799 | .name = "glk_rt5682_def" , |
| 800 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 801 | SOF_SSP_PORT_CODEC(2) | |
| 802 | SOF_SSP_PORT_AMP(1)), |
| 803 | }, |
| 804 | { |
| 805 | .name = "icl_rt5682_def" , |
| 806 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 807 | SOF_SSP_PORT_CODEC(0)), |
| 808 | }, |
| 809 | { |
| 810 | .name = "cml_rt5682_def" , |
| 811 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 812 | SOF_SSP_PORT_CODEC(0) | |
| 813 | SOF_SSP_PORT_AMP(1)), |
| 814 | }, |
| 815 | { |
| 816 | .name = "jsl_rt5682_def" , |
| 817 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 818 | SOF_SSP_PORT_CODEC(0) | |
| 819 | SOF_SSP_PORT_AMP(1)), |
| 820 | }, |
| 821 | { |
| 822 | .name = "tgl_rt5682_def" , |
| 823 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 824 | SOF_SSP_PORT_CODEC(0) | |
| 825 | SOF_SSP_PORT_AMP(1) | |
| 826 | SOF_NUM_IDISP_HDMI(4) | |
| 827 | SOF_SSP_PORT_BT_OFFLOAD(2) | |
| 828 | SOF_BT_OFFLOAD_PRESENT), |
| 829 | }, |
| 830 | { |
| 831 | .name = "adl_rt5682_def" , |
| 832 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 833 | SOF_SSP_PORT_CODEC(0) | |
| 834 | SOF_SSP_PORT_AMP(1) | |
| 835 | SOF_NUM_IDISP_HDMI(4) | |
| 836 | SOF_SSP_PORT_BT_OFFLOAD(2) | |
| 837 | SOF_BT_OFFLOAD_PRESENT), |
| 838 | }, |
| 839 | { |
| 840 | .name = "adl_mx98357_rt5682" , |
| 841 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 842 | SOF_SSP_PORT_CODEC(0) | |
| 843 | SOF_SSP_PORT_AMP(2) | |
| 844 | SOF_NUM_IDISP_HDMI(4)), |
| 845 | }, |
| 846 | { |
| 847 | .name = "adl_rt5682_c1_h02" , |
| 848 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 849 | SOF_SSP_PORT_CODEC(1) | |
| 850 | /* SSP 0 and SSP 2 are used for HDMI IN */ |
| 851 | SOF_SSP_MASK_HDMI_CAPTURE(0x5)), |
| 852 | }, |
| 853 | { |
| 854 | .name = "rpl_mx98357_rt5682" , |
| 855 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 856 | SOF_SSP_PORT_CODEC(0) | |
| 857 | SOF_SSP_PORT_AMP(2) | |
| 858 | SOF_NUM_IDISP_HDMI(4)), |
| 859 | }, |
| 860 | { |
| 861 | .name = "rpl_rt5682_def" , |
| 862 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 863 | SOF_SSP_PORT_CODEC(0) | |
| 864 | SOF_SSP_PORT_AMP(1) | |
| 865 | SOF_NUM_IDISP_HDMI(4) | |
| 866 | SOF_SSP_PORT_BT_OFFLOAD(2) | |
| 867 | SOF_BT_OFFLOAD_PRESENT), |
| 868 | }, |
| 869 | { |
| 870 | .name = "rpl_rt5682_c1_h02" , |
| 871 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 872 | SOF_SSP_PORT_CODEC(1) | |
| 873 | /* SSP 0 and SSP 2 are used for HDMI IN */ |
| 874 | SOF_SSP_MASK_HDMI_CAPTURE(0x5)), |
| 875 | }, |
| 876 | { |
| 877 | .name = "mtl_rt5682_def" , |
| 878 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 879 | SOF_SSP_PORT_CODEC(0) | |
| 880 | SOF_SSP_PORT_AMP(1) | |
| 881 | SOF_SSP_PORT_BT_OFFLOAD(2) | |
| 882 | SOF_BT_OFFLOAD_PRESENT), |
| 883 | }, |
| 884 | { |
| 885 | .name = "mtl_rt5682_c1_h02" , |
| 886 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 887 | SOF_SSP_PORT_CODEC(1) | |
| 888 | /* SSP 0 and SSP 2 are used for HDMI IN */ |
| 889 | SOF_SSP_MASK_HDMI_CAPTURE(0x5)), |
| 890 | }, |
| 891 | { |
| 892 | .name = "arl_rt5682_c1_h02" , |
| 893 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 894 | SOF_SSP_PORT_CODEC(1) | |
| 895 | /* SSP 0 and SSP 2 are used for HDMI IN */ |
| 896 | SOF_SSP_MASK_HDMI_CAPTURE(0x5)), |
| 897 | }, |
| 898 | { |
| 899 | .name = "ptl_rt5682_def" , |
| 900 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 901 | SOF_SSP_PORT_CODEC(0) | |
| 902 | SOF_SSP_PORT_AMP(1) | |
| 903 | SOF_SSP_PORT_BT_OFFLOAD(2) | |
| 904 | SOF_BT_OFFLOAD_PRESENT), |
| 905 | }, |
| 906 | { |
| 907 | .name = "ptl_rt5682_c1_h02" , |
| 908 | .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | |
| 909 | SOF_SSP_PORT_CODEC(1) | |
| 910 | /* SSP 0 and SSP 2 are used for HDMI IN */ |
| 911 | SOF_SSP_MASK_HDMI_CAPTURE(0x5)), |
| 912 | }, |
| 913 | { } |
| 914 | }; |
| 915 | MODULE_DEVICE_TABLE(platform, board_ids); |
| 916 | |
| 917 | static struct platform_driver sof_audio = { |
| 918 | .probe = sof_audio_probe, |
| 919 | .driver = { |
| 920 | .name = "sof_rt5682" , |
| 921 | .pm = &snd_soc_pm_ops, |
| 922 | }, |
| 923 | .id_table = board_ids, |
| 924 | }; |
| 925 | module_platform_driver(sof_audio) |
| 926 | |
| 927 | /* Module information */ |
| 928 | MODULE_DESCRIPTION("SOF Audio Machine driver" ); |
| 929 | MODULE_AUTHOR("Bard Liao <bard.liao@intel.com>" ); |
| 930 | MODULE_AUTHOR("Sathya Prakash M R <sathya.prakash.m.r@intel.com>" ); |
| 931 | MODULE_AUTHOR("Brent Lu <brent.lu@intel.com>" ); |
| 932 | MODULE_AUTHOR("Mac Chiang <mac.chiang@intel.com>" ); |
| 933 | MODULE_LICENSE("GPL v2" ); |
| 934 | MODULE_IMPORT_NS("SND_SOC_INTEL_SOF_BOARD_HELPERS" ); |
| 935 | MODULE_IMPORT_NS("SND_SOC_INTEL_SOF_MAXIM_COMMON" ); |
| 936 | MODULE_IMPORT_NS("SND_SOC_INTEL_SOF_REALTEK_COMMON" ); |
| 937 | |