1/*!
2This module provides forward and reverse substring search routines.
3
4Unlike the standard library's substring search routines, these work on
5arbitrary bytes. For all non-empty needles, these routines will report exactly
6the same values as the corresponding routines in the standard library. For
7the empty needle, the standard library reports matches only at valid UTF-8
8boundaries, where as these routines will report matches at every position.
9
10Other than being able to work on arbitrary bytes, the primary reason to prefer
11these routines over the standard library routines is that these will generally
12be faster. In some cases, significantly so.
13
14# Example: iterating over substring matches
15
16This example shows how to use [`find_iter`] to find occurrences of a substring
17in a haystack.
18
19```
20use memchr::memmem;
21
22let haystack = b"foo bar foo baz foo";
23
24let mut it = memmem::find_iter(haystack, "foo");
25assert_eq!(Some(0), it.next());
26assert_eq!(Some(8), it.next());
27assert_eq!(Some(16), it.next());
28assert_eq!(None, it.next());
29```
30
31# Example: iterating over substring matches in reverse
32
33This example shows how to use [`rfind_iter`] to find occurrences of a substring
34in a haystack starting from the end of the haystack.
35
36**NOTE:** This module does not implement double ended iterators, so reverse
37searches aren't done by calling `rev` on a forward iterator.
38
39```
40use memchr::memmem;
41
42let haystack = b"foo bar foo baz foo";
43
44let mut it = memmem::rfind_iter(haystack, "foo");
45assert_eq!(Some(16), it.next());
46assert_eq!(Some(8), it.next());
47assert_eq!(Some(0), it.next());
48assert_eq!(None, it.next());
49```
50
51# Example: repeating a search for the same needle
52
53It may be possible for the overhead of constructing a substring searcher to be
54measurable in some workloads. In cases where the same needle is used to search
55many haystacks, it is possible to do construction once and thus to avoid it for
56subsequent searches. This can be done with a [`Finder`] (or a [`FinderRev`] for
57reverse searches).
58
59```
60use memchr::memmem;
61
62let finder = memmem::Finder::new("foo");
63
64assert_eq!(Some(4), finder.find(b"baz foo quux"));
65assert_eq!(None, finder.find(b"quux baz bar"));
66```
67*/
68
69pub use crate::memmem::searcher::PrefilterConfig as Prefilter;
70
71// This is exported here for use in the crate::arch::all::twoway
72// implementation. This is essentially an abstraction breaker. Namely, the
73// public API of twoway doesn't support providing a prefilter, but its crate
74// internal API does. The main reason for this is that I didn't want to do the
75// API design required to support it without a concrete use case.
76pub(crate) use crate::memmem::searcher::Pre;
77
78use crate::{
79 arch::all::{
80 packedpair::{DefaultFrequencyRank, HeuristicFrequencyRank},
81 rabinkarp,
82 },
83 cow::CowBytes,
84 memmem::searcher::{PrefilterState, Searcher, SearcherRev},
85};
86
87mod searcher;
88
89/// Returns an iterator over all non-overlapping occurrences of a substring in
90/// a haystack.
91///
92/// # Complexity
93///
94/// This routine is guaranteed to have worst case linear time complexity
95/// with respect to both the needle and the haystack. That is, this runs
96/// in `O(needle.len() + haystack.len())` time.
97///
98/// This routine is also guaranteed to have worst case constant space
99/// complexity.
100///
101/// # Examples
102///
103/// Basic usage:
104///
105/// ```
106/// use memchr::memmem;
107///
108/// let haystack = b"foo bar foo baz foo";
109/// let mut it = memmem::find_iter(haystack, b"foo");
110/// assert_eq!(Some(0), it.next());
111/// assert_eq!(Some(8), it.next());
112/// assert_eq!(Some(16), it.next());
113/// assert_eq!(None, it.next());
114/// ```
115#[inline]
116pub fn find_iter<'h, 'n, N: 'n + ?Sized + AsRef<[u8]>>(
117 haystack: &'h [u8],
118 needle: &'n N,
119) -> FindIter<'h, 'n> {
120 FindIter::new(haystack, Finder::new(needle))
121}
122
123/// Returns a reverse iterator over all non-overlapping occurrences of a
124/// substring in a haystack.
125///
126/// # Complexity
127///
128/// This routine is guaranteed to have worst case linear time complexity
129/// with respect to both the needle and the haystack. That is, this runs
130/// in `O(needle.len() + haystack.len())` time.
131///
132/// This routine is also guaranteed to have worst case constant space
133/// complexity.
134///
135/// # Examples
136///
137/// Basic usage:
138///
139/// ```
140/// use memchr::memmem;
141///
142/// let haystack = b"foo bar foo baz foo";
143/// let mut it = memmem::rfind_iter(haystack, b"foo");
144/// assert_eq!(Some(16), it.next());
145/// assert_eq!(Some(8), it.next());
146/// assert_eq!(Some(0), it.next());
147/// assert_eq!(None, it.next());
148/// ```
149#[inline]
150pub fn rfind_iter<'h, 'n, N: 'n + ?Sized + AsRef<[u8]>>(
151 haystack: &'h [u8],
152 needle: &'n N,
153) -> FindRevIter<'h, 'n> {
154 FindRevIter::new(haystack, FinderRev::new(needle))
155}
156
157/// Returns the index of the first occurrence of the given needle.
158///
159/// Note that if you're are searching for the same needle in many different
160/// small haystacks, it may be faster to initialize a [`Finder`] once,
161/// and reuse it for each search.
162///
163/// # Complexity
164///
165/// This routine is guaranteed to have worst case linear time complexity
166/// with respect to both the needle and the haystack. That is, this runs
167/// in `O(needle.len() + haystack.len())` time.
168///
169/// This routine is also guaranteed to have worst case constant space
170/// complexity.
171///
172/// # Examples
173///
174/// Basic usage:
175///
176/// ```
177/// use memchr::memmem;
178///
179/// let haystack = b"foo bar baz";
180/// assert_eq!(Some(0), memmem::find(haystack, b"foo"));
181/// assert_eq!(Some(4), memmem::find(haystack, b"bar"));
182/// assert_eq!(None, memmem::find(haystack, b"quux"));
183/// ```
184#[inline]
185pub fn find(haystack: &[u8], needle: &[u8]) -> Option<usize> {
186 if haystack.len() < 64 {
187 rabinkarp::Finder::new(needle).find(haystack, needle)
188 } else {
189 Finder::new(needle).find(haystack)
190 }
191}
192
193/// Returns the index of the last occurrence of the given needle.
194///
195/// Note that if you're are searching for the same needle in many different
196/// small haystacks, it may be faster to initialize a [`FinderRev`] once,
197/// and reuse it for each search.
198///
199/// # Complexity
200///
201/// This routine is guaranteed to have worst case linear time complexity
202/// with respect to both the needle and the haystack. That is, this runs
203/// in `O(needle.len() + haystack.len())` time.
204///
205/// This routine is also guaranteed to have worst case constant space
206/// complexity.
207///
208/// # Examples
209///
210/// Basic usage:
211///
212/// ```
213/// use memchr::memmem;
214///
215/// let haystack = b"foo bar baz";
216/// assert_eq!(Some(0), memmem::rfind(haystack, b"foo"));
217/// assert_eq!(Some(4), memmem::rfind(haystack, b"bar"));
218/// assert_eq!(Some(8), memmem::rfind(haystack, b"ba"));
219/// assert_eq!(None, memmem::rfind(haystack, b"quux"));
220/// ```
221#[inline]
222pub fn rfind(haystack: &[u8], needle: &[u8]) -> Option<usize> {
223 if haystack.len() < 64 {
224 rabinkarp::FinderRev::new(needle).rfind(haystack, needle)
225 } else {
226 FinderRev::new(needle).rfind(haystack)
227 }
228}
229
230/// An iterator over non-overlapping substring matches.
231///
232/// Matches are reported by the byte offset at which they begin.
233///
234/// `'h` is the lifetime of the haystack while `'n` is the lifetime of the
235/// needle.
236#[derive(Debug)]
237pub struct FindIter<'h, 'n> {
238 haystack: &'h [u8],
239 prestate: PrefilterState,
240 finder: Finder<'n>,
241 pos: usize,
242}
243
244impl<'h, 'n> FindIter<'h, 'n> {
245 #[inline(always)]
246 pub(crate) fn new(
247 haystack: &'h [u8],
248 finder: Finder<'n>,
249 ) -> FindIter<'h, 'n> {
250 let prestate = PrefilterState::new();
251 FindIter { haystack, prestate, finder, pos: 0 }
252 }
253
254 /// Convert this iterator into its owned variant, such that it no longer
255 /// borrows the finder and needle.
256 ///
257 /// If this is already an owned iterator, then this is a no-op. Otherwise,
258 /// this copies the needle.
259 ///
260 /// This is only available when the `alloc` feature is enabled.
261 #[cfg(feature = "alloc")]
262 #[inline]
263 pub fn into_owned(self) -> FindIter<'h, 'static> {
264 FindIter {
265 haystack: self.haystack,
266 prestate: self.prestate,
267 finder: self.finder.into_owned(),
268 pos: self.pos,
269 }
270 }
271}
272
273impl<'h, 'n> Iterator for FindIter<'h, 'n> {
274 type Item = usize;
275
276 fn next(&mut self) -> Option<usize> {
277 let needle = self.finder.needle();
278 let haystack = self.haystack.get(self.pos..)?;
279 let idx =
280 self.finder.searcher.find(&mut self.prestate, haystack, needle)?;
281
282 let pos = self.pos + idx;
283 self.pos = pos + needle.len().max(1);
284
285 Some(pos)
286 }
287
288 fn size_hint(&self) -> (usize, Option<usize>) {
289 // The largest possible number of non-overlapping matches is the
290 // quotient of the haystack and the needle (or the length of the
291 // haystack, if the needle is empty)
292 match self.haystack.len().checked_sub(self.pos) {
293 None => (0, Some(0)),
294 Some(haystack_len) => match self.finder.needle().len() {
295 // Empty needles always succeed and match at every point
296 // (including the very end)
297 0 => (
298 haystack_len.saturating_add(1),
299 haystack_len.checked_add(1),
300 ),
301 needle_len => (0, Some(haystack_len / needle_len)),
302 },
303 }
304 }
305}
306
307/// An iterator over non-overlapping substring matches in reverse.
308///
309/// Matches are reported by the byte offset at which they begin.
310///
311/// `'h` is the lifetime of the haystack while `'n` is the lifetime of the
312/// needle.
313#[derive(Debug)]
314pub struct FindRevIter<'h, 'n> {
315 haystack: &'h [u8],
316 finder: FinderRev<'n>,
317 /// When searching with an empty needle, this gets set to `None` after
318 /// we've yielded the last element at `0`.
319 pos: Option<usize>,
320}
321
322impl<'h, 'n> FindRevIter<'h, 'n> {
323 #[inline(always)]
324 pub(crate) fn new(
325 haystack: &'h [u8],
326 finder: FinderRev<'n>,
327 ) -> FindRevIter<'h, 'n> {
328 let pos = Some(haystack.len());
329 FindRevIter { haystack, finder, pos }
330 }
331
332 /// Convert this iterator into its owned variant, such that it no longer
333 /// borrows the finder and needle.
334 ///
335 /// If this is already an owned iterator, then this is a no-op. Otherwise,
336 /// this copies the needle.
337 ///
338 /// This is only available when the `std` feature is enabled.
339 #[cfg(feature = "alloc")]
340 #[inline]
341 pub fn into_owned(self) -> FindRevIter<'h, 'static> {
342 FindRevIter {
343 haystack: self.haystack,
344 finder: self.finder.into_owned(),
345 pos: self.pos,
346 }
347 }
348}
349
350impl<'h, 'n> Iterator for FindRevIter<'h, 'n> {
351 type Item = usize;
352
353 fn next(&mut self) -> Option<usize> {
354 let pos = match self.pos {
355 None => return None,
356 Some(pos) => pos,
357 };
358 let result = self.finder.rfind(&self.haystack[..pos]);
359 match result {
360 None => None,
361 Some(i) => {
362 if pos == i {
363 self.pos = pos.checked_sub(1);
364 } else {
365 self.pos = Some(i);
366 }
367 Some(i)
368 }
369 }
370 }
371}
372
373/// A single substring searcher fixed to a particular needle.
374///
375/// The purpose of this type is to permit callers to construct a substring
376/// searcher that can be used to search haystacks without the overhead of
377/// constructing the searcher in the first place. This is a somewhat niche
378/// concern when it's necessary to re-use the same needle to search multiple
379/// different haystacks with as little overhead as possible. In general, using
380/// [`find`] is good enough, but `Finder` is useful when you can meaningfully
381/// observe searcher construction time in a profile.
382///
383/// When the `std` feature is enabled, then this type has an `into_owned`
384/// version which permits building a `Finder` that is not connected to
385/// the lifetime of its needle.
386#[derive(Clone, Debug)]
387pub struct Finder<'n> {
388 needle: CowBytes<'n>,
389 searcher: Searcher,
390}
391
392impl<'n> Finder<'n> {
393 /// Create a new finder for the given needle.
394 #[inline]
395 pub fn new<B: ?Sized + AsRef<[u8]>>(needle: &'n B) -> Finder<'n> {
396 FinderBuilder::new().build_forward(needle)
397 }
398
399 /// Returns the index of the first occurrence of this needle in the given
400 /// haystack.
401 ///
402 /// # Complexity
403 ///
404 /// This routine is guaranteed to have worst case linear time complexity
405 /// with respect to both the needle and the haystack. That is, this runs
406 /// in `O(needle.len() + haystack.len())` time.
407 ///
408 /// This routine is also guaranteed to have worst case constant space
409 /// complexity.
410 ///
411 /// # Examples
412 ///
413 /// Basic usage:
414 ///
415 /// ```
416 /// use memchr::memmem::Finder;
417 ///
418 /// let haystack = b"foo bar baz";
419 /// assert_eq!(Some(0), Finder::new("foo").find(haystack));
420 /// assert_eq!(Some(4), Finder::new("bar").find(haystack));
421 /// assert_eq!(None, Finder::new("quux").find(haystack));
422 /// ```
423 #[inline]
424 pub fn find(&self, haystack: &[u8]) -> Option<usize> {
425 let mut prestate = PrefilterState::new();
426 let needle = self.needle.as_slice();
427 self.searcher.find(&mut prestate, haystack, needle)
428 }
429
430 /// Returns an iterator over all occurrences of a substring in a haystack.
431 ///
432 /// # Complexity
433 ///
434 /// This routine is guaranteed to have worst case linear time complexity
435 /// with respect to both the needle and the haystack. That is, this runs
436 /// in `O(needle.len() + haystack.len())` time.
437 ///
438 /// This routine is also guaranteed to have worst case constant space
439 /// complexity.
440 ///
441 /// # Examples
442 ///
443 /// Basic usage:
444 ///
445 /// ```
446 /// use memchr::memmem::Finder;
447 ///
448 /// let haystack = b"foo bar foo baz foo";
449 /// let finder = Finder::new(b"foo");
450 /// let mut it = finder.find_iter(haystack);
451 /// assert_eq!(Some(0), it.next());
452 /// assert_eq!(Some(8), it.next());
453 /// assert_eq!(Some(16), it.next());
454 /// assert_eq!(None, it.next());
455 /// ```
456 #[inline]
457 pub fn find_iter<'a, 'h>(
458 &'a self,
459 haystack: &'h [u8],
460 ) -> FindIter<'h, 'a> {
461 FindIter::new(haystack, self.as_ref())
462 }
463
464 /// Convert this finder into its owned variant, such that it no longer
465 /// borrows the needle.
466 ///
467 /// If this is already an owned finder, then this is a no-op. Otherwise,
468 /// this copies the needle.
469 ///
470 /// This is only available when the `alloc` feature is enabled.
471 #[cfg(feature = "alloc")]
472 #[inline]
473 pub fn into_owned(self) -> Finder<'static> {
474 Finder {
475 needle: self.needle.into_owned(),
476 searcher: self.searcher.clone(),
477 }
478 }
479
480 /// Convert this finder into its borrowed variant.
481 ///
482 /// This is primarily useful if your finder is owned and you'd like to
483 /// store its borrowed variant in some intermediate data structure.
484 ///
485 /// Note that the lifetime parameter of the returned finder is tied to the
486 /// lifetime of `self`, and may be shorter than the `'n` lifetime of the
487 /// needle itself. Namely, a finder's needle can be either borrowed or
488 /// owned, so the lifetime of the needle returned must necessarily be the
489 /// shorter of the two.
490 #[inline]
491 pub fn as_ref(&self) -> Finder<'_> {
492 Finder {
493 needle: CowBytes::new(self.needle()),
494 searcher: self.searcher.clone(),
495 }
496 }
497
498 /// Returns the needle that this finder searches for.
499 ///
500 /// Note that the lifetime of the needle returned is tied to the lifetime
501 /// of the finder, and may be shorter than the `'n` lifetime. Namely, a
502 /// finder's needle can be either borrowed or owned, so the lifetime of the
503 /// needle returned must necessarily be the shorter of the two.
504 #[inline]
505 pub fn needle(&self) -> &[u8] {
506 self.needle.as_slice()
507 }
508}
509
510/// A single substring reverse searcher fixed to a particular needle.
511///
512/// The purpose of this type is to permit callers to construct a substring
513/// searcher that can be used to search haystacks without the overhead of
514/// constructing the searcher in the first place. This is a somewhat niche
515/// concern when it's necessary to re-use the same needle to search multiple
516/// different haystacks with as little overhead as possible. In general,
517/// using [`rfind`] is good enough, but `FinderRev` is useful when you can
518/// meaningfully observe searcher construction time in a profile.
519///
520/// When the `std` feature is enabled, then this type has an `into_owned`
521/// version which permits building a `FinderRev` that is not connected to
522/// the lifetime of its needle.
523#[derive(Clone, Debug)]
524pub struct FinderRev<'n> {
525 needle: CowBytes<'n>,
526 searcher: SearcherRev,
527}
528
529impl<'n> FinderRev<'n> {
530 /// Create a new reverse finder for the given needle.
531 #[inline]
532 pub fn new<B: ?Sized + AsRef<[u8]>>(needle: &'n B) -> FinderRev<'n> {
533 FinderBuilder::new().build_reverse(needle)
534 }
535
536 /// Returns the index of the last occurrence of this needle in the given
537 /// haystack.
538 ///
539 /// The haystack may be any type that can be cheaply converted into a
540 /// `&[u8]`. This includes, but is not limited to, `&str` and `&[u8]`.
541 ///
542 /// # Complexity
543 ///
544 /// This routine is guaranteed to have worst case linear time complexity
545 /// with respect to both the needle and the haystack. That is, this runs
546 /// in `O(needle.len() + haystack.len())` time.
547 ///
548 /// This routine is also guaranteed to have worst case constant space
549 /// complexity.
550 ///
551 /// # Examples
552 ///
553 /// Basic usage:
554 ///
555 /// ```
556 /// use memchr::memmem::FinderRev;
557 ///
558 /// let haystack = b"foo bar baz";
559 /// assert_eq!(Some(0), FinderRev::new("foo").rfind(haystack));
560 /// assert_eq!(Some(4), FinderRev::new("bar").rfind(haystack));
561 /// assert_eq!(None, FinderRev::new("quux").rfind(haystack));
562 /// ```
563 pub fn rfind<B: AsRef<[u8]>>(&self, haystack: B) -> Option<usize> {
564 self.searcher.rfind(haystack.as_ref(), self.needle.as_slice())
565 }
566
567 /// Returns a reverse iterator over all occurrences of a substring in a
568 /// haystack.
569 ///
570 /// # Complexity
571 ///
572 /// This routine is guaranteed to have worst case linear time complexity
573 /// with respect to both the needle and the haystack. That is, this runs
574 /// in `O(needle.len() + haystack.len())` time.
575 ///
576 /// This routine is also guaranteed to have worst case constant space
577 /// complexity.
578 ///
579 /// # Examples
580 ///
581 /// Basic usage:
582 ///
583 /// ```
584 /// use memchr::memmem::FinderRev;
585 ///
586 /// let haystack = b"foo bar foo baz foo";
587 /// let finder = FinderRev::new(b"foo");
588 /// let mut it = finder.rfind_iter(haystack);
589 /// assert_eq!(Some(16), it.next());
590 /// assert_eq!(Some(8), it.next());
591 /// assert_eq!(Some(0), it.next());
592 /// assert_eq!(None, it.next());
593 /// ```
594 #[inline]
595 pub fn rfind_iter<'a, 'h>(
596 &'a self,
597 haystack: &'h [u8],
598 ) -> FindRevIter<'h, 'a> {
599 FindRevIter::new(haystack, self.as_ref())
600 }
601
602 /// Convert this finder into its owned variant, such that it no longer
603 /// borrows the needle.
604 ///
605 /// If this is already an owned finder, then this is a no-op. Otherwise,
606 /// this copies the needle.
607 ///
608 /// This is only available when the `std` feature is enabled.
609 #[cfg(feature = "alloc")]
610 #[inline]
611 pub fn into_owned(self) -> FinderRev<'static> {
612 FinderRev {
613 needle: self.needle.into_owned(),
614 searcher: self.searcher.clone(),
615 }
616 }
617
618 /// Convert this finder into its borrowed variant.
619 ///
620 /// This is primarily useful if your finder is owned and you'd like to
621 /// store its borrowed variant in some intermediate data structure.
622 ///
623 /// Note that the lifetime parameter of the returned finder is tied to the
624 /// lifetime of `self`, and may be shorter than the `'n` lifetime of the
625 /// needle itself. Namely, a finder's needle can be either borrowed or
626 /// owned, so the lifetime of the needle returned must necessarily be the
627 /// shorter of the two.
628 #[inline]
629 pub fn as_ref(&self) -> FinderRev<'_> {
630 FinderRev {
631 needle: CowBytes::new(self.needle()),
632 searcher: self.searcher.clone(),
633 }
634 }
635
636 /// Returns the needle that this finder searches for.
637 ///
638 /// Note that the lifetime of the needle returned is tied to the lifetime
639 /// of the finder, and may be shorter than the `'n` lifetime. Namely, a
640 /// finder's needle can be either borrowed or owned, so the lifetime of the
641 /// needle returned must necessarily be the shorter of the two.
642 #[inline]
643 pub fn needle(&self) -> &[u8] {
644 self.needle.as_slice()
645 }
646}
647
648/// A builder for constructing non-default forward or reverse memmem finders.
649///
650/// A builder is primarily useful for configuring a substring searcher.
651/// Currently, the only configuration exposed is the ability to disable
652/// heuristic prefilters used to speed up certain searches.
653#[derive(Clone, Debug, Default)]
654pub struct FinderBuilder {
655 prefilter: Prefilter,
656}
657
658impl FinderBuilder {
659 /// Create a new finder builder with default settings.
660 pub fn new() -> FinderBuilder {
661 FinderBuilder::default()
662 }
663
664 /// Build a forward finder using the given needle from the current
665 /// settings.
666 pub fn build_forward<'n, B: ?Sized + AsRef<[u8]>>(
667 &self,
668 needle: &'n B,
669 ) -> Finder<'n> {
670 self.build_forward_with_ranker(DefaultFrequencyRank, needle)
671 }
672
673 /// Build a forward finder using the given needle and a custom heuristic for
674 /// determining the frequency of a given byte in the dataset.
675 /// See [`HeuristicFrequencyRank`] for more details.
676 pub fn build_forward_with_ranker<
677 'n,
678 R: HeuristicFrequencyRank,
679 B: ?Sized + AsRef<[u8]>,
680 >(
681 &self,
682 ranker: R,
683 needle: &'n B,
684 ) -> Finder<'n> {
685 let needle = needle.as_ref();
686 Finder {
687 needle: CowBytes::new(needle),
688 searcher: Searcher::new(self.prefilter, ranker, needle),
689 }
690 }
691
692 /// Build a reverse finder using the given needle from the current
693 /// settings.
694 pub fn build_reverse<'n, B: ?Sized + AsRef<[u8]>>(
695 &self,
696 needle: &'n B,
697 ) -> FinderRev<'n> {
698 let needle = needle.as_ref();
699 FinderRev {
700 needle: CowBytes::new(needle),
701 searcher: SearcherRev::new(needle),
702 }
703 }
704
705 /// Configure the prefilter setting for the finder.
706 ///
707 /// See the documentation for [`Prefilter`] for more discussion on why
708 /// you might want to configure this.
709 pub fn prefilter(&mut self, prefilter: Prefilter) -> &mut FinderBuilder {
710 self.prefilter = prefilter;
711 self
712 }
713}
714
715#[cfg(test)]
716mod tests {
717 use super::*;
718
719 define_substring_forward_quickcheck!(|h, n| Some(Finder::new(n).find(h)));
720 define_substring_reverse_quickcheck!(|h, n| Some(
721 FinderRev::new(n).rfind(h)
722 ));
723
724 #[test]
725 fn forward() {
726 crate::tests::substring::Runner::new()
727 .fwd(|h, n| Some(Finder::new(n).find(h)))
728 .run();
729 }
730
731 #[test]
732 fn reverse() {
733 crate::tests::substring::Runner::new()
734 .rev(|h, n| Some(FinderRev::new(n).rfind(h)))
735 .run();
736 }
737}
738