1/***************************************************************************/
2/* */
3/* ftoption.h */
4/* */
5/* User-selectable configuration macros (specification only). */
6/* */
7/* Copyright 1996-2015 by */
8/* David Turner, Robert Wilhelm, and Werner Lemberg. */
9/* */
10/* This file is part of the FreeType project, and may only be used, */
11/* modified, and distributed under the terms of the FreeType project */
12/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
13/* this file you indicate that you have read the license and */
14/* understand and accept it fully. */
15/* */
16/***************************************************************************/
17
18
19#ifndef __FTOPTION_H__
20#define __FTOPTION_H__
21
22
23#include <ft2build.h>
24
25
26FT_BEGIN_HEADER
27
28 /*************************************************************************/
29 /* */
30 /* USER-SELECTABLE CONFIGURATION MACROS */
31 /* */
32 /* This file contains the default configuration macro definitions for */
33 /* a standard build of the FreeType library. There are three ways to */
34 /* use this file to build project-specific versions of the library: */
35 /* */
36 /* - You can modify this file by hand, but this is not recommended in */
37 /* cases where you would like to build several versions of the */
38 /* library from a single source directory. */
39 /* */
40 /* - You can put a copy of this file in your build directory, more */
41 /* precisely in `$BUILD/config/ftoption.h', where `$BUILD' is the */
42 /* name of a directory that is included _before_ the FreeType include */
43 /* path during compilation. */
44 /* */
45 /* The default FreeType Makefiles and Jamfiles use the build */
46 /* directory `builds/<system>' by default, but you can easily change */
47 /* that for your own projects. */
48 /* */
49 /* - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it */
50 /* slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to */
51 /* locate this file during the build. For example, */
52 /* */
53 /* #define FT_CONFIG_OPTIONS_H <myftoptions.h> */
54 /* #include <config/ftheader.h> */
55 /* */
56 /* will use `$BUILD/myftoptions.h' instead of this file for macro */
57 /* definitions. */
58 /* */
59 /* Note also that you can similarly pre-define the macro */
60 /* FT_CONFIG_MODULES_H used to locate the file listing of the modules */
61 /* that are statically linked to the library at compile time. By */
62 /* default, this file is <config/ftmodule.h>. */
63 /* */
64 /* We highly recommend using the third method whenever possible. */
65 /* */
66 /*************************************************************************/
67
68
69 /*************************************************************************/
70 /*************************************************************************/
71 /**** ****/
72 /**** G E N E R A L F R E E T Y P E 2 C O N F I G U R A T I O N ****/
73 /**** ****/
74 /*************************************************************************/
75 /*************************************************************************/
76
77
78 /*************************************************************************/
79 /* */
80 /* Uncomment the line below if you want to activate sub-pixel rendering */
81 /* (a.k.a. LCD rendering, or ClearType) in this build of the library. */
82 /* */
83 /* Note that this feature is covered by several Microsoft patents */
84 /* and should not be activated in any default build of the library. */
85 /* */
86 /* This macro has no impact on the FreeType API, only on its */
87 /* _implementation_. For example, using FT_RENDER_MODE_LCD when calling */
88 /* FT_Render_Glyph still generates a bitmap that is 3 times wider than */
89 /* the original size in case this macro isn't defined; however, each */
90 /* triplet of subpixels has R=G=B. */
91 /* */
92 /* This is done to allow FreeType clients to run unmodified, forcing */
93 /* them to display normal gray-level anti-aliased glyphs. */
94 /* */
95/* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */
96
97
98 /*************************************************************************/
99 /* */
100 /* Many compilers provide a non-ANSI 64-bit data type that can be used */
101 /* by FreeType to speed up some computations. However, this will create */
102 /* some problems when compiling the library in strict ANSI mode. */
103 /* */
104 /* For this reason, the use of 64-bit integers is normally disabled when */
105 /* the __STDC__ macro is defined. You can however disable this by */
106 /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here. */
107 /* */
108 /* For most compilers, this will only create compilation warnings when */
109 /* building the library. */
110 /* */
111 /* ObNote: The compiler-specific 64-bit integers are detected in the */
112 /* file `ftconfig.h' either statically or through the */
113 /* `configure' script on supported platforms. */
114 /* */
115#undef FT_CONFIG_OPTION_FORCE_INT64
116
117
118 /*************************************************************************/
119 /* */
120 /* If this macro is defined, do not try to use an assembler version of */
121 /* performance-critical functions (e.g. FT_MulFix). You should only do */
122 /* that to verify that the assembler function works properly, or to */
123 /* execute benchmark tests of the various implementations. */
124/* #define FT_CONFIG_OPTION_NO_ASSEMBLER */
125
126
127 /*************************************************************************/
128 /* */
129 /* If this macro is defined, try to use an inlined assembler version of */
130 /* the `FT_MulFix' function, which is a `hotspot' when loading and */
131 /* hinting glyphs, and which should be executed as fast as possible. */
132 /* */
133 /* Note that if your compiler or CPU is not supported, this will default */
134 /* to the standard and portable implementation found in `ftcalc.c'. */
135 /* */
136#define FT_CONFIG_OPTION_INLINE_MULFIX
137
138
139 /*************************************************************************/
140 /* */
141 /* LZW-compressed file support. */
142 /* */
143 /* FreeType now handles font files that have been compressed with the */
144 /* `compress' program. This is mostly used to parse many of the PCF */
145 /* files that come with various X11 distributions. The implementation */
146 /* uses NetBSD's `zopen' to partially uncompress the file on the fly */
147 /* (see src/lzw/ftgzip.c). */
148 /* */
149 /* Define this macro if you want to enable this `feature'. */
150 /* */
151#define FT_CONFIG_OPTION_USE_LZW
152
153
154 /*************************************************************************/
155 /* */
156 /* Gzip-compressed file support. */
157 /* */
158 /* FreeType now handles font files that have been compressed with the */
159 /* `gzip' program. This is mostly used to parse many of the PCF files */
160 /* that come with XFree86. The implementation uses `zlib' to */
161 /* partially uncompress the file on the fly (see src/gzip/ftgzip.c). */
162 /* */
163 /* Define this macro if you want to enable this `feature'. See also */
164 /* the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below. */
165 /* */
166#define FT_CONFIG_OPTION_USE_ZLIB
167
168
169 /*************************************************************************/
170 /* */
171 /* ZLib library selection */
172 /* */
173 /* This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined. */
174 /* It allows FreeType's `ftgzip' component to link to the system's */
175 /* installation of the ZLib library. This is useful on systems like */
176 /* Unix or VMS where it generally is already available. */
177 /* */
178 /* If you let it undefined, the component will use its own copy */
179 /* of the zlib sources instead. These have been modified to be */
180 /* included directly within the component and *not* export external */
181 /* function names. This allows you to link any program with FreeType */
182 /* _and_ ZLib without linking conflicts. */
183 /* */
184 /* Do not #undef this macro here since the build system might define */
185 /* it for certain configurations only. */
186 /* */
187/* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */
188
189
190 /*************************************************************************/
191 /* */
192 /* Bzip2-compressed file support. */
193 /* */
194 /* FreeType now handles font files that have been compressed with the */
195 /* `bzip2' program. This is mostly used to parse many of the PCF */
196 /* files that come with XFree86. The implementation uses `libbz2' to */
197 /* partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */
198 /* Contrary to gzip, bzip2 currently is not included and need to use */
199 /* the system available bzip2 implementation. */
200 /* */
201 /* Define this macro if you want to enable this `feature'. */
202 /* */
203/* #define FT_CONFIG_OPTION_USE_BZIP2 */
204
205
206 /*************************************************************************/
207 /* */
208 /* Define to disable the use of file stream functions and types, FILE, */
209 /* fopen() etc. Enables the use of smaller system libraries on embedded */
210 /* systems that have multiple system libraries, some with or without */
211 /* file stream support, in the cases where file stream support is not */
212 /* necessary such as memory loading of font files. */
213 /* */
214/* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */
215
216
217 /*************************************************************************/
218 /* */
219 /* PNG bitmap support. */
220 /* */
221 /* FreeType now handles loading color bitmap glyphs in the PNG format. */
222 /* This requires help from the external libpng library. Uncompressed */
223 /* color bitmaps do not need any external libraries and will be */
224 /* supported regardless of this configuration. */
225 /* */
226 /* Define this macro if you want to enable this `feature'. */
227 /* */
228#define FT_CONFIG_OPTION_USE_PNG
229
230
231 /*************************************************************************/
232 /* */
233 /* HarfBuzz support. */
234 /* */
235 /* FreeType uses the HarfBuzz library to improve auto-hinting of */
236 /* OpenType fonts. If available, many glyphs not directly addressable */
237 /* by a font's character map will be hinted also. */
238 /* */
239 /* Define this macro if you want to enable this `feature'. */
240 /* */
241/* #define FT_CONFIG_OPTION_USE_HARFBUZZ */
242
243
244 /*************************************************************************/
245 /* */
246 /* DLL export compilation */
247 /* */
248 /* When compiling FreeType as a DLL, some systems/compilers need a */
249 /* special keyword in front OR after the return type of function */
250 /* declarations. */
251 /* */
252 /* Two macros are used within the FreeType source code to define */
253 /* exported library functions: FT_EXPORT and FT_EXPORT_DEF. */
254 /* */
255 /* FT_EXPORT( return_type ) */
256 /* */
257 /* is used in a function declaration, as in */
258 /* */
259 /* FT_EXPORT( FT_Error ) */
260 /* FT_Init_FreeType( FT_Library* alibrary ); */
261 /* */
262 /* */
263 /* FT_EXPORT_DEF( return_type ) */
264 /* */
265 /* is used in a function definition, as in */
266 /* */
267 /* FT_EXPORT_DEF( FT_Error ) */
268 /* FT_Init_FreeType( FT_Library* alibrary ) */
269 /* { */
270 /* ... some code ... */
271 /* return FT_Err_Ok; */
272 /* } */
273 /* */
274 /* You can provide your own implementation of FT_EXPORT and */
275 /* FT_EXPORT_DEF here if you want. If you leave them undefined, they */
276 /* will be later automatically defined as `extern return_type' to */
277 /* allow normal compilation. */
278 /* */
279 /* Do not #undef these macros here since the build system might define */
280 /* them for certain configurations only. */
281 /* */
282/* #define FT_EXPORT(x) extern x */
283/* #define FT_EXPORT_DEF(x) x */
284
285
286 /*************************************************************************/
287 /* */
288 /* Glyph Postscript Names handling */
289 /* */
290 /* By default, FreeType 2 is compiled with the `psnames' module. This */
291 /* module is in charge of converting a glyph name string into a */
292 /* Unicode value, or return a Macintosh standard glyph name for the */
293 /* use with the TrueType `post' table. */
294 /* */
295 /* Undefine this macro if you do not want `psnames' compiled in your */
296 /* build of FreeType. This has the following effects: */
297 /* */
298 /* - The TrueType driver will provide its own set of glyph names, */
299 /* if you build it to support postscript names in the TrueType */
300 /* `post' table. */
301 /* */
302 /* - The Type 1 driver will not be able to synthesize a Unicode */
303 /* charmap out of the glyphs found in the fonts. */
304 /* */
305 /* You would normally undefine this configuration macro when building */
306 /* a version of FreeType that doesn't contain a Type 1 or CFF driver. */
307 /* */
308#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES
309
310
311 /*************************************************************************/
312 /* */
313 /* Postscript Names to Unicode Values support */
314 /* */
315 /* By default, FreeType 2 is built with the `PSNames' module compiled */
316 /* in. Among other things, the module is used to convert a glyph name */
317 /* into a Unicode value. This is especially useful in order to */
318 /* synthesize on the fly a Unicode charmap from the CFF/Type 1 driver */
319 /* through a big table named the `Adobe Glyph List' (AGL). */
320 /* */
321 /* Undefine this macro if you do not want the Adobe Glyph List */
322 /* compiled in your `PSNames' module. The Type 1 driver will not be */
323 /* able to synthesize a Unicode charmap out of the glyphs found in the */
324 /* fonts. */
325 /* */
326// #define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST
327
328
329 /*************************************************************************/
330 /* */
331 /* Support for Mac fonts */
332 /* */
333 /* Define this macro if you want support for outline fonts in Mac */
334 /* format (mac dfont, mac resource, macbinary containing a mac */
335 /* resource) on non-Mac platforms. */
336 /* */
337 /* Note that the `FOND' resource isn't checked. */
338 /* */
339// #define FT_CONFIG_OPTION_MAC_FONTS
340
341
342 /*************************************************************************/
343 /* */
344 /* Guessing methods to access embedded resource forks */
345 /* */
346 /* Enable extra Mac fonts support on non-Mac platforms (e.g. */
347 /* GNU/Linux). */
348 /* */
349 /* Resource forks which include fonts data are stored sometimes in */
350 /* locations which users or developers don't expected. In some cases, */
351 /* resource forks start with some offset from the head of a file. In */
352 /* other cases, the actual resource fork is stored in file different */
353 /* from what the user specifies. If this option is activated, */
354 /* FreeType tries to guess whether such offsets or different file */
355 /* names must be used. */
356 /* */
357 /* Note that normal, direct access of resource forks is controlled via */
358 /* the FT_CONFIG_OPTION_MAC_FONTS option. */
359 /* */
360#ifdef FT_CONFIG_OPTION_MAC_FONTS
361#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK
362#endif
363
364
365 /*************************************************************************/
366 /* */
367 /* Allow the use of FT_Incremental_Interface to load typefaces that */
368 /* contain no glyph data, but supply it via a callback function. */
369 /* This is required by clients supporting document formats which */
370 /* supply font data incrementally as the document is parsed, such */
371 /* as the Ghostscript interpreter for the PostScript language. */
372 /* */
373/* #define FT_CONFIG_OPTION_INCREMENTAL */
374
375
376 /*************************************************************************/
377 /* */
378 /* The size in bytes of the render pool used by the scan-line converter */
379 /* to do all of its work. */
380 /* */
381#define FT_RENDER_POOL_SIZE 16384L
382
383
384 /*************************************************************************/
385 /* */
386 /* FT_MAX_MODULES */
387 /* */
388 /* The maximum number of modules that can be registered in a single */
389 /* FreeType library object. 32 is the default. */
390 /* */
391#define FT_MAX_MODULES 32
392
393
394 /*************************************************************************/
395 /* */
396 /* Debug level */
397 /* */
398 /* FreeType can be compiled in debug or trace mode. In debug mode, */
399 /* errors are reported through the `ftdebug' component. In trace */
400 /* mode, additional messages are sent to the standard output during */
401 /* execution. */
402 /* */
403 /* Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode. */
404 /* Define FT_DEBUG_LEVEL_TRACE to build it in trace mode. */
405 /* */
406 /* Don't define any of these macros to compile in `release' mode! */
407 /* */
408 /* Do not #undef these macros here since the build system might define */
409 /* them for certain configurations only. */
410 /* */
411/* #define FT_DEBUG_LEVEL_ERROR */
412/* #define FT_DEBUG_LEVEL_TRACE */
413
414
415 /*************************************************************************/
416 /* */
417 /* Autofitter debugging */
418 /* */
419 /* If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to */
420 /* control the autofitter behaviour for debugging purposes with global */
421 /* boolean variables (consequently, you should *never* enable this */
422 /* while compiling in `release' mode): */
423 /* */
424 /* _af_debug_disable_horz_hints */
425 /* _af_debug_disable_vert_hints */
426 /* _af_debug_disable_blue_hints */
427 /* */
428 /* Additionally, the following functions provide dumps of various */
429 /* internal autofit structures to stdout (using `printf'): */
430 /* */
431 /* af_glyph_hints_dump_points */
432 /* af_glyph_hints_dump_segments */
433 /* af_glyph_hints_dump_edges */
434 /* af_glyph_hints_get_num_segments */
435 /* af_glyph_hints_get_segment_offset */
436 /* */
437 /* As an argument, they use another global variable: */
438 /* */
439 /* _af_debug_hints */
440 /* */
441 /* Please have a look at the `ftgrid' demo program to see how those */
442 /* variables and macros should be used. */
443 /* */
444 /* Do not #undef these macros here since the build system might define */
445 /* them for certain configurations only. */
446 /* */
447/* #define FT_DEBUG_AUTOFIT */
448
449
450 /*************************************************************************/
451 /* */
452 /* Memory Debugging */
453 /* */
454 /* FreeType now comes with an integrated memory debugger that is */
455 /* capable of detecting simple errors like memory leaks or double */
456 /* deletes. To compile it within your build of the library, you */
457 /* should define FT_DEBUG_MEMORY here. */
458 /* */
459 /* Note that the memory debugger is only activated at runtime when */
460 /* when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */
461 /* */
462 /* Do not #undef this macro here since the build system might define */
463 /* it for certain configurations only. */
464 /* */
465/* #define FT_DEBUG_MEMORY */
466
467
468 /*************************************************************************/
469 /* */
470 /* Module errors */
471 /* */
472 /* If this macro is set (which is _not_ the default), the higher byte */
473 /* of an error code gives the module in which the error has occurred, */
474 /* while the lower byte is the real error code. */
475 /* */
476 /* Setting this macro makes sense for debugging purposes only, since */
477 /* it would break source compatibility of certain programs that use */
478 /* FreeType 2. */
479 /* */
480 /* More details can be found in the files ftmoderr.h and fterrors.h. */
481 /* */
482#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS
483
484
485 /*************************************************************************/
486 /* */
487 /* Position Independent Code */
488 /* */
489 /* If this macro is set (which is _not_ the default), FreeType2 will */
490 /* avoid creating constants that require address fixups. Instead the */
491 /* constants will be moved into a struct and additional intialization */
492 /* code will be used. */
493 /* */
494 /* Setting this macro is needed for systems that prohibit address */
495 /* fixups, such as BREW. */
496 /* */
497/* #define FT_CONFIG_OPTION_PIC */
498
499
500 /*************************************************************************/
501 /*************************************************************************/
502 /**** ****/
503 /**** S F N T D R I V E R C O N F I G U R A T I O N ****/
504 /**** ****/
505 /*************************************************************************/
506 /*************************************************************************/
507
508
509 /*************************************************************************/
510 /* */
511 /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support */
512 /* embedded bitmaps in all formats using the SFNT module (namely */
513 /* TrueType & OpenType). */
514 /* */
515#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
516
517
518 /**************************************************************************
519 *
520 * Define `TT_CONFIG_OPTION_COLOR_LAYERS` if you want to support colored
521 * outlines (from the 'COLR'/'CPAL' tables) in all formats using the 'sfnt'
522 * module (namely TrueType~& OpenType).
523 */
524#define TT_CONFIG_OPTION_COLOR_LAYERS
525
526
527 /*************************************************************************/
528 /* */
529 /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to */
530 /* load and enumerate the glyph Postscript names in a TrueType or */
531 /* OpenType file. */
532 /* */
533 /* Note that when you do not compile the `PSNames' module by undefining */
534 /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will */
535 /* contain additional code used to read the PS Names table from a font. */
536 /* */
537 /* (By default, the module uses `PSNames' to extract glyph names.) */
538 /* */
539#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES
540
541
542 /*************************************************************************/
543 /* */
544 /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to */
545 /* access the internal name table in a SFNT-based format like TrueType */
546 /* or OpenType. The name table contains various strings used to */
547 /* describe the font, like family name, copyright, version, etc. It */
548 /* does not contain any glyph name though. */
549 /* */
550 /* Accessing SFNT names is done through the functions declared in */
551 /* `ftsnames.h'. */
552 /* */
553#define TT_CONFIG_OPTION_SFNT_NAMES
554
555
556 /*************************************************************************/
557 /* */
558 /* TrueType CMap support */
559 /* */
560 /* Here you can fine-tune which TrueType CMap table format shall be */
561 /* supported. */
562#define TT_CONFIG_CMAP_FORMAT_0
563#define TT_CONFIG_CMAP_FORMAT_2
564#define TT_CONFIG_CMAP_FORMAT_4
565#define TT_CONFIG_CMAP_FORMAT_6
566#define TT_CONFIG_CMAP_FORMAT_8
567#define TT_CONFIG_CMAP_FORMAT_10
568#define TT_CONFIG_CMAP_FORMAT_12
569#define TT_CONFIG_CMAP_FORMAT_13
570#define TT_CONFIG_CMAP_FORMAT_14
571
572
573 /*************************************************************************/
574 /*************************************************************************/
575 /**** ****/
576 /**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/
577 /**** ****/
578 /*************************************************************************/
579 /*************************************************************************/
580
581 /*************************************************************************/
582 /* */
583 /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile */
584 /* a bytecode interpreter in the TrueType driver. */
585 /* */
586 /* By undefining this, you will only compile the code necessary to load */
587 /* TrueType glyphs without hinting. */
588 /* */
589 /* Do not #undef this macro here, since the build system might */
590 /* define it for certain configurations only. */
591 /* */
592#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER
593
594
595 /*************************************************************************/
596 /* */
597 /* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile */
598 /* EXPERIMENTAL subpixel hinting support into the TrueType driver. This */
599 /* replaces the native TrueType hinting mechanism when anything but */
600 /* FT_RENDER_MODE_MONO is requested. */
601 /* */
602 /* Enabling this causes the TrueType driver to ignore instructions under */
603 /* certain conditions. This is done in accordance with the guide here, */
604 /* with some minor differences: */
605 /* */
606 /* http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */
607 /* */
608 /* By undefining this, you only compile the code necessary to hint */
609 /* TrueType glyphs with native TT hinting. */
610 /* */
611 /* This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be */
612 /* defined. */
613 /* */
614/* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING */
615
616
617 /*************************************************************************/
618 /* */
619 /* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version */
620 /* of the TrueType bytecode interpreter is used that doesn't implement */
621 /* any of the patented opcodes and algorithms. The patents related to */
622 /* TrueType hinting have expired worldwide since May 2010; this option */
623 /* is now deprecated. */
624 /* */
625 /* Note that the TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored* */
626 /* if you define TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words, */
627 /* either define TT_CONFIG_OPTION_BYTECODE_INTERPRETER or */
628 /* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time. */
629 /* */
630 /* This macro is only useful for a small number of font files (mostly */
631 /* for Asian scripts) that require bytecode interpretation to properly */
632 /* load glyphs. For all other fonts, this produces unpleasant results, */
633 /* thus the unpatented interpreter is never used to load glyphs from */
634 /* TrueType fonts unless one of the following two options is used. */
635 /* */
636 /* - The unpatented interpreter is explicitly activated by the user */
637 /* through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag */
638 /* when opening the FT_Face. */
639 /* */
640 /* - FreeType detects that the FT_Face corresponds to one of the */
641 /* `trick' fonts (e.g., `Mingliu') it knows about. The font engine */
642 /* contains a hard-coded list of font names and other matching */
643 /* parameters (see function `tt_face_init' in file */
644 /* `src/truetype/ttobjs.c'). */
645 /* */
646 /* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */
647 /* */
648 /* { */
649 /* FT_Parameter parameter; */
650 /* FT_Open_Args open_args; */
651 /* */
652 /* */
653 /* parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING; */
654 /* */
655 /* open_args.flags = FT_OPEN_PATHNAME | FT_OPEN_PARAMS; */
656 /* open_args.pathname = my_font_pathname; */
657 /* open_args.num_params = 1; */
658 /* open_args.params = &parameter; */
659 /* */
660 /* error = FT_Open_Face( library, &open_args, index, &face ); */
661 /* ... */
662 /* } */
663 /* */
664/* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */
665
666
667 /*************************************************************************/
668 /* */
669 /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the */
670 /* TrueType glyph loader to use Apple's definition of how to handle */
671 /* component offsets in composite glyphs. */
672 /* */
673 /* Apple and MS disagree on the default behavior of component offsets */
674 /* in composites. Apple says that they should be scaled by the scaling */
675 /* factors in the transformation matrix (roughly, it's more complex) */
676 /* while MS says they should not. OpenType defines two bits in the */
677 /* composite flags array which can be used to disambiguate, but old */
678 /* fonts will not have them. */
679 /* */
680 /* http://www.microsoft.com/typography/otspec/glyf.htm */
681 /* https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6glyf.html */
682 /* */
683#undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
684
685
686 /*************************************************************************/
687 /* */
688 /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include */
689 /* support for Apple's distortable font technology (fvar, gvar, cvar, */
690 /* and avar tables). This has many similarities to Type 1 Multiple */
691 /* Masters support. */
692 /* */
693#define TT_CONFIG_OPTION_GX_VAR_SUPPORT
694
695
696 /*************************************************************************/
697 /* */
698 /* Define TT_CONFIG_OPTION_BDF if you want to include support for */
699 /* an embedded `BDF ' table within SFNT-based bitmap formats. */
700 /* */
701#define TT_CONFIG_OPTION_BDF
702
703
704 /*************************************************************************/
705 /* */
706 /* Option TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES controls the maximum */
707 /* number of bytecode instructions executed for a single run of the */
708 /* bytecode interpreter, needed to prevent infinite loops. You don't */
709 /* want to change this except for very special situations (e.g., making */
710 /* a library fuzzer spend less time to handle broken fonts). */
711 /* */
712 /* It is not expected that this value is ever modified by a configuring */
713 /* script; instead, it gets surrounded with #ifndef ... #endif so that */
714 /* the value can be set as a preprocessor option on the compiler's */
715 /* command line. */
716 /* */
717#ifndef TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES
718#define TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES 1000000L
719#endif
720
721
722 /*************************************************************************/
723 /*************************************************************************/
724 /**** ****/
725 /**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/
726 /**** ****/
727 /*************************************************************************/
728 /*************************************************************************/
729
730
731 /*************************************************************************/
732 /* */
733 /* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and */
734 /* arrays in the Type 1 stream (see t1load.c). A minimum of 4 is */
735 /* required. */
736 /* */
737#define T1_MAX_DICT_DEPTH 5
738
739
740 /*************************************************************************/
741 /* */
742 /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */
743 /* calls during glyph loading. */
744 /* */
745#define T1_MAX_SUBRS_CALLS 16
746
747
748 /*************************************************************************/
749 /* */
750 /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */
751 /* minimum of 16 is required. */
752 /* */
753 /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */
754 /* */
755#define T1_MAX_CHARSTRINGS_OPERANDS 256
756
757
758 /*************************************************************************/
759 /* */
760 /* Define this configuration macro if you want to prevent the */
761 /* compilation of `t1afm', which is in charge of reading Type 1 AFM */
762 /* files into an existing face. Note that if set, the T1 driver will be */
763 /* unable to produce kerning distances. */
764 /* */
765#undef T1_CONFIG_OPTION_NO_AFM
766
767
768 /*************************************************************************/
769 /* */
770 /* Define this configuration macro if you want to prevent the */
771 /* compilation of the Multiple Masters font support in the Type 1 */
772 /* driver. */
773 /* */
774#undef T1_CONFIG_OPTION_NO_MM_SUPPORT
775
776
777 /*************************************************************************/
778 /*************************************************************************/
779 /**** ****/
780 /**** C F F D R I V E R C O N F I G U R A T I O N ****/
781 /**** ****/
782 /*************************************************************************/
783 /*************************************************************************/
784
785
786 /*************************************************************************/
787 /* */
788 /* Using CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4} it is */
789 /* possible to set up the default values of the four control points that */
790 /* define the stem darkening behaviour of the (new) CFF engine. For */
791 /* more details please read the documentation of the */
792 /* `darkening-parameters' property of the cff driver module (file */
793 /* `ftcffdrv.h'), which allows the control at run-time. */
794 /* */
795 /* Do *not* undefine these macros! */
796 /* */
797#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 500
798#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 400
799
800#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 1000
801#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 275
802
803#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 1667
804#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 275
805
806#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 2333
807#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 0
808
809
810 /*************************************************************************/
811 /* */
812 /* CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF */
813 /* engine gets compiled into FreeType. If defined, it is possible to */
814 /* switch between the two engines using the `hinting-engine' property of */
815 /* the cff driver module. */
816 /* */
817/* #define CFF_CONFIG_OPTION_OLD_ENGINE */
818
819
820 /*************************************************************************/
821 /*************************************************************************/
822 /**** ****/
823 /**** A U T O F I T M O D U L E C O N F I G U R A T I O N ****/
824 /**** ****/
825 /*************************************************************************/
826 /*************************************************************************/
827
828
829 /*************************************************************************/
830 /* */
831 /* Compile autofit module with CJK (Chinese, Japanese, Korean) script */
832 /* support. */
833 /* */
834#define AF_CONFIG_OPTION_CJK
835
836 /*************************************************************************/
837 /* */
838 /* Compile autofit module with Indic script support. */
839 /* */
840#define AF_CONFIG_OPTION_INDIC
841
842 /*************************************************************************/
843 /* */
844 /* Compile autofit module with warp hinting. The idea of the warping */
845 /* code is to slightly scale and shift a glyph within a single dimension */
846 /* so that as much of its segments are aligned (more or less) on the */
847 /* grid. To find out the optimal scaling and shifting value, various */
848 /* parameter combinations are tried and scored. */
849 /* */
850 /* This experimental option is active only if the rendering mode is */
851 /* FT_RENDER_MODE_LIGHT; you can switch warping on and off with the */
852 /* `warping' property of the auto-hinter (see file `ftautoh.h' for more */
853 /* information; by default it is switched off). */
854 /* */
855/*#define AF_CONFIG_OPTION_USE_WARPER*/
856
857 /* */
858
859
860 /*
861 * This macro is obsolete. Support has been removed in FreeType
862 * version 2.5.
863 */
864/* #define FT_CONFIG_OPTION_OLD_INTERNALS */
865
866
867 /*
868 * This macro is defined if either unpatented or native TrueType
869 * hinting is requested by the definitions above.
870 */
871#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
872#define TT_USE_BYTECODE_INTERPRETER
873#undef TT_CONFIG_OPTION_UNPATENTED_HINTING
874#elif defined TT_CONFIG_OPTION_UNPATENTED_HINTING
875#define TT_USE_BYTECODE_INTERPRETER
876#endif
877
878
879 /*
880 * The TT_SUPPORT_COLRV1 macro is defined to indicate to clients that this
881 * version of FreeType has support for 'COLR' v1 API. This definition is
882 * useful to FreeType clients that want to build in support for 'COLR' v1
883 * depending on a tip-of-tree checkout before it is officially released in
884 * FreeType, and while the feature cannot yet be tested against using
885 * version macros. Don't change this macro. This may be removed once the
886 * feature is in a FreeType release version and version macros can be used
887 * to test for availability.
888 */
889#ifdef TT_CONFIG_OPTION_COLOR_LAYERS
890#define TT_SUPPORT_COLRV1
891#endif
892
893
894 /*
895 * Check CFF darkening parameters. The checks are the same as in function
896 * `cff_property_set' in file `cffdrivr.c'.
897 */
898#if CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 < 0 || \
899 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 < 0 || \
900 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 < 0 || \
901 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 < 0 || \
902 \
903 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 < 0 || \
904 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 < 0 || \
905 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 < 0 || \
906 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 < 0 || \
907 \
908 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 > \
909 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 || \
910 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 > \
911 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 || \
912 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 > \
913 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 || \
914 \
915 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 > 500 || \
916 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 > 500 || \
917 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 > 500 || \
918 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 > 500
919#error "Invalid CFF darkening parameters!"
920#endif
921
922FT_END_HEADER
923
924
925#endif /* __FTOPTION_H__ */
926
927
928/* END */
929

Provided by KDAB

Privacy Policy
Learn more about Flutter for embedded and desktop on industrialflutter.com

source code of flutter_engine/third_party/freetype2/include/freetype-flutter-config/ftoption.h