| 1 | /**************************************************************************** |
| 2 | * |
| 3 | * ftmoderr.h |
| 4 | * |
| 5 | * FreeType module error offsets (specification). |
| 6 | * |
| 7 | * Copyright (C) 2001-2021 by |
| 8 | * David Turner, Robert Wilhelm, and Werner Lemberg. |
| 9 | * |
| 10 | * This file is part of the FreeType project, and may only be used, |
| 11 | * modified, and distributed under the terms of the FreeType project |
| 12 | * license, LICENSE.TXT. By continuing to use, modify, or distribute |
| 13 | * this file you indicate that you have read the license and |
| 14 | * understand and accept it fully. |
| 15 | * |
| 16 | */ |
| 17 | |
| 18 | |
| 19 | /************************************************************************** |
| 20 | * |
| 21 | * This file is used to define the FreeType module error codes. |
| 22 | * |
| 23 | * If the macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` in `ftoption.h` is |
| 24 | * set, the lower byte of an error value identifies the error code as |
| 25 | * usual. In addition, the higher byte identifies the module. For |
| 26 | * example, the error `FT_Err_Invalid_File_Format` has value 0x0003, the |
| 27 | * error `TT_Err_Invalid_File_Format` has value 0x1303, the error |
| 28 | * `T1_Err_Invalid_File_Format` has value 0x1403, etc. |
| 29 | * |
| 30 | * Note that `FT_Err_Ok`, `TT_Err_Ok`, etc. are always equal to zero, |
| 31 | * including the high byte. |
| 32 | * |
| 33 | * If `FT_CONFIG_OPTION_USE_MODULE_ERRORS` isn't set, the higher byte of an |
| 34 | * error value is set to zero. |
| 35 | * |
| 36 | * To hide the various `XXX_Err_` prefixes in the source code, FreeType |
| 37 | * provides some macros in `fttypes.h`. |
| 38 | * |
| 39 | * FT_ERR( err ) |
| 40 | * |
| 41 | * Add current error module prefix (as defined with the `FT_ERR_PREFIX` |
| 42 | * macro) to `err`. For example, in the BDF module the line |
| 43 | * |
| 44 | * ``` |
| 45 | * error = FT_ERR( Invalid_Outline ); |
| 46 | * ``` |
| 47 | * |
| 48 | * expands to |
| 49 | * |
| 50 | * ``` |
| 51 | * error = BDF_Err_Invalid_Outline; |
| 52 | * ``` |
| 53 | * |
| 54 | * For simplicity, you can always use `FT_Err_Ok` directly instead of |
| 55 | * `FT_ERR( Ok )`. |
| 56 | * |
| 57 | * FT_ERR_EQ( errcode, err ) |
| 58 | * FT_ERR_NEQ( errcode, err ) |
| 59 | * |
| 60 | * Compare error code `errcode` with the error `err` for equality and |
| 61 | * inequality, respectively. Example: |
| 62 | * |
| 63 | * ``` |
| 64 | * if ( FT_ERR_EQ( error, Invalid_Outline ) ) |
| 65 | * ... |
| 66 | * ``` |
| 67 | * |
| 68 | * Using this macro you don't have to think about error prefixes. Of |
| 69 | * course, if module errors are not active, the above example is the |
| 70 | * same as |
| 71 | * |
| 72 | * ``` |
| 73 | * if ( error == FT_Err_Invalid_Outline ) |
| 74 | * ... |
| 75 | * ``` |
| 76 | * |
| 77 | * FT_ERROR_BASE( errcode ) |
| 78 | * FT_ERROR_MODULE( errcode ) |
| 79 | * |
| 80 | * Get base error and module error code, respectively. |
| 81 | * |
| 82 | * It can also be used to create a module error message table easily with |
| 83 | * something like |
| 84 | * |
| 85 | * ``` |
| 86 | * #undef FTMODERR_H_ |
| 87 | * #define FT_MODERRDEF( e, v, s ) { FT_Mod_Err_ ## e, s }, |
| 88 | * #define FT_MODERR_START_LIST { |
| 89 | * #define FT_MODERR_END_LIST { 0, 0 } }; |
| 90 | * |
| 91 | * const struct |
| 92 | * { |
| 93 | * int mod_err_offset; |
| 94 | * const char* mod_err_msg |
| 95 | * } ft_mod_errors[] = |
| 96 | * |
| 97 | * #include <freetype/ftmoderr.h> |
| 98 | * ``` |
| 99 | * |
| 100 | */ |
| 101 | |
| 102 | |
| 103 | #ifndef FTMODERR_H_ |
| 104 | #define FTMODERR_H_ |
| 105 | |
| 106 | |
| 107 | /*******************************************************************/ |
| 108 | /*******************************************************************/ |
| 109 | /***** *****/ |
| 110 | /***** SETUP MACROS *****/ |
| 111 | /***** *****/ |
| 112 | /*******************************************************************/ |
| 113 | /*******************************************************************/ |
| 114 | |
| 115 | |
| 116 | #undef FT_NEED_EXTERN_C |
| 117 | |
| 118 | #ifndef FT_MODERRDEF |
| 119 | |
| 120 | #ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS |
| 121 | #define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = v, |
| 122 | #else |
| 123 | #define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = 0, |
| 124 | #endif |
| 125 | |
| 126 | #define FT_MODERR_START_LIST enum { |
| 127 | #define FT_MODERR_END_LIST FT_Mod_Err_Max }; |
| 128 | |
| 129 | #ifdef __cplusplus |
| 130 | #define FT_NEED_EXTERN_C |
| 131 | extern "C" { |
| 132 | #endif |
| 133 | |
| 134 | #endif /* !FT_MODERRDEF */ |
| 135 | |
| 136 | |
| 137 | /*******************************************************************/ |
| 138 | /*******************************************************************/ |
| 139 | /***** *****/ |
| 140 | /***** LIST MODULE ERROR BASES *****/ |
| 141 | /***** *****/ |
| 142 | /*******************************************************************/ |
| 143 | /*******************************************************************/ |
| 144 | |
| 145 | |
| 146 | #ifdef FT_MODERR_START_LIST |
| 147 | FT_MODERR_START_LIST |
| 148 | #endif |
| 149 | |
| 150 | |
| 151 | FT_MODERRDEF( Base, 0x000, "base module" ) |
| 152 | FT_MODERRDEF( Autofit, 0x100, "autofitter module" ) |
| 153 | FT_MODERRDEF( BDF, 0x200, "BDF module" ) |
| 154 | FT_MODERRDEF( Bzip2, 0x300, "Bzip2 module" ) |
| 155 | FT_MODERRDEF( Cache, 0x400, "cache module" ) |
| 156 | FT_MODERRDEF( CFF, 0x500, "CFF module" ) |
| 157 | FT_MODERRDEF( CID, 0x600, "CID module" ) |
| 158 | FT_MODERRDEF( Gzip, 0x700, "Gzip module" ) |
| 159 | FT_MODERRDEF( LZW, 0x800, "LZW module" ) |
| 160 | FT_MODERRDEF( OTvalid, 0x900, "OpenType validation module" ) |
| 161 | FT_MODERRDEF( PCF, 0xA00, "PCF module" ) |
| 162 | FT_MODERRDEF( PFR, 0xB00, "PFR module" ) |
| 163 | FT_MODERRDEF( PSaux, 0xC00, "PS auxiliary module" ) |
| 164 | FT_MODERRDEF( PShinter, 0xD00, "PS hinter module" ) |
| 165 | FT_MODERRDEF( PSnames, 0xE00, "PS names module" ) |
| 166 | FT_MODERRDEF( Raster, 0xF00, "raster module" ) |
| 167 | FT_MODERRDEF( SFNT, 0x1000, "SFNT module" ) |
| 168 | FT_MODERRDEF( Smooth, 0x1100, "smooth raster module" ) |
| 169 | FT_MODERRDEF( TrueType, 0x1200, "TrueType module" ) |
| 170 | FT_MODERRDEF( Type1, 0x1300, "Type 1 module" ) |
| 171 | FT_MODERRDEF( Type42, 0x1400, "Type 42 module" ) |
| 172 | FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" ) |
| 173 | FT_MODERRDEF( GXvalid, 0x1600, "GX validation module" ) |
| 174 | FT_MODERRDEF( Sdf, 0x1700, "Signed distance field raster module" ) |
| 175 | |
| 176 | |
| 177 | #ifdef FT_MODERR_END_LIST |
| 178 | FT_MODERR_END_LIST |
| 179 | #endif |
| 180 | |
| 181 | |
| 182 | /*******************************************************************/ |
| 183 | /*******************************************************************/ |
| 184 | /***** *****/ |
| 185 | /***** CLEANUP *****/ |
| 186 | /***** *****/ |
| 187 | /*******************************************************************/ |
| 188 | /*******************************************************************/ |
| 189 | |
| 190 | |
| 191 | #ifdef FT_NEED_EXTERN_C |
| 192 | } |
| 193 | #endif |
| 194 | |
| 195 | #undef FT_MODERR_START_LIST |
| 196 | #undef FT_MODERR_END_LIST |
| 197 | #undef FT_MODERRDEF |
| 198 | #undef FT_NEED_EXTERN_C |
| 199 | |
| 200 | |
| 201 | #endif /* FTMODERR_H_ */ |
| 202 | |
| 203 | |
| 204 | /* END */ |
| 205 | |