1 | /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ |
2 | /* This Source Code Form is subject to the terms of the Mozilla Public |
3 | * License, v. 2.0. If a copy of the MPL was not distributed with this |
4 | * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ |
5 | |
6 | #ifndef prerr_h___ |
7 | #define prerr_h___ |
8 | |
9 | /* |
10 | * |
11 | * prerr.h |
12 | * This file is automatically generated; please do not edit it. |
13 | */ |
14 | |
15 | /* Memory allocation attempt failed */ |
16 | #define PR_OUT_OF_MEMORY_ERROR (-6000L) |
17 | |
18 | /* Invalid file descriptor */ |
19 | #define PR_BAD_DESCRIPTOR_ERROR (-5999L) |
20 | |
21 | /* The operation would have blocked */ |
22 | #define PR_WOULD_BLOCK_ERROR (-5998L) |
23 | |
24 | /* Invalid memory address argument */ |
25 | #define PR_ACCESS_FAULT_ERROR (-5997L) |
26 | |
27 | /* Invalid function for file type */ |
28 | #define PR_INVALID_METHOD_ERROR (-5996L) |
29 | |
30 | /* Invalid memory address argument */ |
31 | #define PR_ILLEGAL_ACCESS_ERROR (-5995L) |
32 | |
33 | /* Some unknown error has occurred */ |
34 | #define PR_UNKNOWN_ERROR (-5994L) |
35 | |
36 | /* Operation interrupted by another thread */ |
37 | #define PR_PENDING_INTERRUPT_ERROR (-5993L) |
38 | |
39 | /* function not implemented */ |
40 | #define PR_NOT_IMPLEMENTED_ERROR (-5992L) |
41 | |
42 | /* I/O function error */ |
43 | #define PR_IO_ERROR (-5991L) |
44 | |
45 | /* I/O operation timed out */ |
46 | #define PR_IO_TIMEOUT_ERROR (-5990L) |
47 | |
48 | /* I/O operation on busy file descriptor */ |
49 | #define PR_IO_PENDING_ERROR (-5989L) |
50 | |
51 | /* The directory could not be opened */ |
52 | #define PR_DIRECTORY_OPEN_ERROR (-5988L) |
53 | |
54 | /* Invalid function argument */ |
55 | #define PR_INVALID_ARGUMENT_ERROR (-5987L) |
56 | |
57 | /* Network address not available (in use?) */ |
58 | #define PR_ADDRESS_NOT_AVAILABLE_ERROR (-5986L) |
59 | |
60 | /* Network address type not supported */ |
61 | #define PR_ADDRESS_NOT_SUPPORTED_ERROR (-5985L) |
62 | |
63 | /* Already connected */ |
64 | #define PR_IS_CONNECTED_ERROR (-5984L) |
65 | |
66 | /* Network address is invalid */ |
67 | #define PR_BAD_ADDRESS_ERROR (-5983L) |
68 | |
69 | /* Local Network address is in use */ |
70 | #define PR_ADDRESS_IN_USE_ERROR (-5982L) |
71 | |
72 | /* Connection refused by peer */ |
73 | #define PR_CONNECT_REFUSED_ERROR (-5981L) |
74 | |
75 | /* Network address is presently unreachable */ |
76 | #define PR_NETWORK_UNREACHABLE_ERROR (-5980L) |
77 | |
78 | /* Connection attempt timed out */ |
79 | #define PR_CONNECT_TIMEOUT_ERROR (-5979L) |
80 | |
81 | /* Network file descriptor is not connected */ |
82 | #define PR_NOT_CONNECTED_ERROR (-5978L) |
83 | |
84 | /* Failure to load dynamic library */ |
85 | #define PR_LOAD_LIBRARY_ERROR (-5977L) |
86 | |
87 | /* Failure to unload dynamic library */ |
88 | #define PR_UNLOAD_LIBRARY_ERROR (-5976L) |
89 | |
90 | /* Symbol not found in any of the loaded dynamic libraries */ |
91 | #define PR_FIND_SYMBOL_ERROR (-5975L) |
92 | |
93 | /* Insufficient system resources */ |
94 | #define PR_INSUFFICIENT_RESOURCES_ERROR (-5974L) |
95 | |
96 | /* A directory lookup on a network address has failed */ |
97 | #define PR_DIRECTORY_LOOKUP_ERROR (-5973L) |
98 | |
99 | /* Attempt to access a TPD key that is out of range */ |
100 | #define PR_TPD_RANGE_ERROR (-5972L) |
101 | |
102 | /* Process open FD table is full */ |
103 | #define PR_PROC_DESC_TABLE_FULL_ERROR (-5971L) |
104 | |
105 | /* System open FD table is full */ |
106 | #define PR_SYS_DESC_TABLE_FULL_ERROR (-5970L) |
107 | |
108 | /* Network operation attempted on non-network file descriptor */ |
109 | #define PR_NOT_SOCKET_ERROR (-5969L) |
110 | |
111 | /* TCP-specific function attempted on a non-TCP file descriptor */ |
112 | #define PR_NOT_TCP_SOCKET_ERROR (-5968L) |
113 | |
114 | /* TCP file descriptor is already bound */ |
115 | #define PR_SOCKET_ADDRESS_IS_BOUND_ERROR (-5967L) |
116 | |
117 | /* Access Denied */ |
118 | #define PR_NO_ACCESS_RIGHTS_ERROR (-5966L) |
119 | |
120 | /* The requested operation is not supported by the platform */ |
121 | #define PR_OPERATION_NOT_SUPPORTED_ERROR (-5965L) |
122 | |
123 | /* The host operating system does not support the protocol requested */ |
124 | #define PR_PROTOCOL_NOT_SUPPORTED_ERROR (-5964L) |
125 | |
126 | /* Access to the remote file has been severed */ |
127 | #define PR_REMOTE_FILE_ERROR (-5963L) |
128 | |
129 | /* The value requested is too large to be stored in the data buffer provided */ |
130 | #define PR_BUFFER_OVERFLOW_ERROR (-5962L) |
131 | |
132 | /* TCP connection reset by peer */ |
133 | #define PR_CONNECT_RESET_ERROR (-5961L) |
134 | |
135 | /* Unused */ |
136 | #define PR_RANGE_ERROR (-5960L) |
137 | |
138 | /* The operation would have deadlocked */ |
139 | #define PR_DEADLOCK_ERROR (-5959L) |
140 | |
141 | /* The file is already locked */ |
142 | #define PR_FILE_IS_LOCKED_ERROR (-5958L) |
143 | |
144 | /* Write would result in file larger than the system allows */ |
145 | #define PR_FILE_TOO_BIG_ERROR (-5957L) |
146 | |
147 | /* The device for storing the file is full */ |
148 | #define PR_NO_DEVICE_SPACE_ERROR (-5956L) |
149 | |
150 | /* Unused */ |
151 | #define PR_PIPE_ERROR (-5955L) |
152 | |
153 | /* Unused */ |
154 | #define PR_NO_SEEK_DEVICE_ERROR (-5954L) |
155 | |
156 | /* Cannot perform a normal file operation on a directory */ |
157 | #define PR_IS_DIRECTORY_ERROR (-5953L) |
158 | |
159 | /* Symbolic link loop */ |
160 | #define PR_LOOP_ERROR (-5952L) |
161 | |
162 | /* File name is too long */ |
163 | #define PR_NAME_TOO_LONG_ERROR (-5951L) |
164 | |
165 | /* File not found */ |
166 | #define PR_FILE_NOT_FOUND_ERROR (-5950L) |
167 | |
168 | /* Cannot perform directory operation on a normal file */ |
169 | #define PR_NOT_DIRECTORY_ERROR (-5949L) |
170 | |
171 | /* Cannot write to a read-only file system */ |
172 | #define PR_READ_ONLY_FILESYSTEM_ERROR (-5948L) |
173 | |
174 | /* Cannot delete a directory that is not empty */ |
175 | #define PR_DIRECTORY_NOT_EMPTY_ERROR (-5947L) |
176 | |
177 | /* Cannot delete or rename a file object while the file system is busy */ |
178 | #define PR_FILESYSTEM_MOUNTED_ERROR (-5946L) |
179 | |
180 | /* Cannot rename a file to a file system on another device */ |
181 | #define PR_NOT_SAME_DEVICE_ERROR (-5945L) |
182 | |
183 | /* The directory object in the file system is corrupted */ |
184 | #define PR_DIRECTORY_CORRUPTED_ERROR (-5944L) |
185 | |
186 | /* Cannot create or rename a filename that already exists */ |
187 | #define PR_FILE_EXISTS_ERROR (-5943L) |
188 | |
189 | /* Directory is full. No additional filenames may be added */ |
190 | #define PR_MAX_DIRECTORY_ENTRIES_ERROR (-5942L) |
191 | |
192 | /* The required device was in an invalid state */ |
193 | #define PR_INVALID_DEVICE_STATE_ERROR (-5941L) |
194 | |
195 | /* The device is locked */ |
196 | #define PR_DEVICE_IS_LOCKED_ERROR (-5940L) |
197 | |
198 | /* No more entries in the directory */ |
199 | #define PR_NO_MORE_FILES_ERROR (-5939L) |
200 | |
201 | /* Encountered end of file */ |
202 | #define PR_END_OF_FILE_ERROR (-5938L) |
203 | |
204 | /* Seek error */ |
205 | #define PR_FILE_SEEK_ERROR (-5937L) |
206 | |
207 | /* The file is busy */ |
208 | #define PR_FILE_IS_BUSY_ERROR (-5936L) |
209 | |
210 | /* The I/O operation was aborted */ |
211 | #define PR_OPERATION_ABORTED_ERROR (-5935L) |
212 | |
213 | /* Operation is still in progress (probably a non-blocking connect) */ |
214 | #define PR_IN_PROGRESS_ERROR (-5934L) |
215 | |
216 | /* Operation has already been initiated (probably a non-blocking connect) */ |
217 | #define PR_ALREADY_INITIATED_ERROR (-5933L) |
218 | |
219 | /* The wait group is empty */ |
220 | #define PR_GROUP_EMPTY_ERROR (-5932L) |
221 | |
222 | /* Object state improper for request */ |
223 | #define PR_INVALID_STATE_ERROR (-5931L) |
224 | |
225 | /* Network is down */ |
226 | #define PR_NETWORK_DOWN_ERROR (-5930L) |
227 | |
228 | /* Socket shutdown */ |
229 | #define PR_SOCKET_SHUTDOWN_ERROR (-5929L) |
230 | |
231 | /* Connection aborted */ |
232 | #define PR_CONNECT_ABORTED_ERROR (-5928L) |
233 | |
234 | /* Host is unreachable */ |
235 | #define PR_HOST_UNREACHABLE_ERROR (-5927L) |
236 | |
237 | /* The library is not loaded */ |
238 | #define PR_LIBRARY_NOT_LOADED_ERROR (-5926L) |
239 | |
240 | /* The one-time function was previously called and failed. Its error code is no longer available */ |
241 | #define PR_CALL_ONCE_ERROR (-5925L) |
242 | |
243 | /* Placeholder for the end of the list */ |
244 | #define PR_MAX_ERROR (-5924L) |
245 | |
246 | extern void nspr_InitializePRErrorTable(void); |
247 | #define ERROR_TABLE_BASE_nspr (-6000L) |
248 | |
249 | #endif /* prerr_h___ */ |
250 | |