1 | /* SPDX-License-Identifier: GPL-2.0 */ |
2 | /* |
3 | * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
4 | * http://www.samsung.com |
5 | */ |
6 | |
7 | /* pull in the relevant register and map files. */ |
8 | |
9 | #define S3C_ADDR_BASE 0xF6000000 |
10 | #define S3C_VA_UART S3C_ADDR_BASE + 0x01000000 |
11 | #define EXYNOS4_PA_UART 0x13800000 |
12 | #define EXYNOS5_PA_UART 0x12C00000 |
13 | |
14 | /* note, for the boot process to work we have to keep the UART |
15 | * virtual address aligned to an 1MiB boundary for the L1 |
16 | * mapping the head code makes. We keep the UART virtual address |
17 | * aligned and add in the offset when we load the value here. |
18 | */ |
19 | |
20 | .macro addruart, rp, rv, tmp |
21 | mrc p15, 0, \tmp, c0, c0, 0 |
22 | and \tmp, \tmp, #0xf0 |
23 | teq \tmp, #0xf0 @@ A15 |
24 | beq 100f |
25 | mrc p15, 0, \tmp, c0, c0, 5 |
26 | and \tmp, \tmp, #0xf00 |
27 | teq \tmp, #0x100 @@ A15 + A7 but boot to A7 |
28 | 100: ldreq \rp, =EXYNOS5_PA_UART |
29 | movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4 |
30 | ldr \rv, =S3C_VA_UART |
31 | #if CONFIG_DEBUG_S3C_UART != 0 |
32 | add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) |
33 | add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) |
34 | #endif |
35 | .endm |
36 | |
37 | #define fifo_full fifo_full_s5pv210 |
38 | #define fifo_level fifo_level_s5pv210 |
39 | |
40 | #include <debug/samsung.S> |
41 | |