1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * Copyright (C) 2020 BayLibre, SAS
4 * Author: Neil Armstrong <narmstrong@baylibre.com>
5 * Copyright (C) 2018 Amlogic, Inc. All rights reserved.
6 */
7
8#ifndef __MESON_DW_MIPI_DSI_H
9#define __MESON_DW_MIPI_DSI_H
10
11/* Top-level registers */
12/* [31: 4] Reserved. Default 0.
13 * [3] RW timing_rst_n: Default 1.
14 * 1=Assert SW reset of timing feature. 0=Release reset.
15 * [2] RW dpi_rst_n: Default 1.
16 * 1=Assert SW reset on mipi_dsi_host_dpi block. 0=Release reset.
17 * [1] RW intr_rst_n: Default 1.
18 * 1=Assert SW reset on mipi_dsi_host_intr block. 0=Release reset.
19 * [0] RW dwc_rst_n: Default 1.
20 * 1=Assert SW reset on IP core. 0=Release reset.
21 */
22#define MIPI_DSI_TOP_SW_RESET 0x3c0
23
24#define MIPI_DSI_TOP_SW_RESET_DWC BIT(0)
25#define MIPI_DSI_TOP_SW_RESET_INTR BIT(1)
26#define MIPI_DSI_TOP_SW_RESET_DPI BIT(2)
27#define MIPI_DSI_TOP_SW_RESET_TIMING BIT(3)
28
29/* [31: 5] Reserved. Default 0.
30 * [4] RW manual_edpihalt: Default 0.
31 * 1=Manual suspend VencL; 0=do not suspend VencL.
32 * [3] RW auto_edpihalt_en: Default 0.
33 * 1=Enable IP's edpihalt signal to suspend VencL;
34 * 0=IP's edpihalt signal does not affect VencL.
35 * [2] RW clock_freerun: Apply to auto-clock gate only. Default 0.
36 * 0=Default, use auto-clock gating to save power;
37 * 1=use free-run clock, disable auto-clock gating, for debug mode.
38 * [1] RW enable_pixclk: A manual clock gate option, due to DWC IP does not
39 * have auto-clock gating. 1=Enable pixclk. Default 0.
40 * [0] RW enable_sysclk: A manual clock gate option, due to DWC IP does not
41 * have auto-clock gating. 1=Enable sysclk. Default 0.
42 */
43#define MIPI_DSI_TOP_CLK_CNTL 0x3c4
44
45#define MIPI_DSI_TOP_CLK_SYSCLK_EN BIT(0)
46#define MIPI_DSI_TOP_CLK_PIXCLK_EN BIT(1)
47
48/* [31:24] Reserved. Default 0.
49 * [23:20] RW dpi_color_mode: Define DPI pixel format. Default 0.
50 * 0=16-bit RGB565 config 1;
51 * 1=16-bit RGB565 config 2;
52 * 2=16-bit RGB565 config 3;
53 * 3=18-bit RGB666 config 1;
54 * 4=18-bit RGB666 config 2;
55 * 5=24-bit RGB888;
56 * 6=20-bit YCbCr 4:2:2;
57 * 7=24-bit YCbCr 4:2:2;
58 * 8=16-bit YCbCr 4:2:2;
59 * 9=30-bit RGB;
60 * 10=36-bit RGB;
61 * 11=12-bit YCbCr 4:2:0.
62 * [19] Reserved. Default 0.
63 * [18:16] RW in_color_mode: Define VENC data width. Default 0.
64 * 0=30-bit pixel;
65 * 1=24-bit pixel;
66 * 2=18-bit pixel, RGB666;
67 * 3=16-bit pixel, RGB565.
68 * [15:14] RW chroma_subsample: Define method of chroma subsampling. Default 0.
69 * Applicable to YUV422 or YUV420 only.
70 * 0=Use even pixel's chroma;
71 * 1=Use odd pixel's chroma;
72 * 2=Use averaged value between even and odd pair.
73 * [13:12] RW comp2_sel: Select which component to be Cr or B: Default 2.
74 * 0=comp0; 1=comp1; 2=comp2.
75 * [11:10] RW comp1_sel: Select which component to be Cb or G: Default 1.
76 * 0=comp0; 1=comp1; 2=comp2.
77 * [9: 8] RW comp0_sel: Select which component to be Y or R: Default 0.
78 * 0=comp0; 1=comp1; 2=comp2.
79 * [7] Reserved. Default 0.
80 * [6] RW de_pol: Default 0.
81 * If DE input is active low, set to 1 to invert to active high.
82 * [5] RW hsync_pol: Default 0.
83 * If HS input is active low, set to 1 to invert to active high.
84 * [4] RW vsync_pol: Default 0.
85 * If VS input is active low, set to 1 to invert to active high.
86 * [3] RW dpicolorm: Signal to IP. Default 0.
87 * [2] RW dpishutdn: Signal to IP. Default 0.
88 * [1] Reserved. Default 0.
89 * [0] Reserved. Default 0.
90 */
91#define MIPI_DSI_TOP_CNTL 0x3c8
92
93/* VENC data width */
94#define VENC_IN_COLOR_30B 0x0
95#define VENC_IN_COLOR_24B 0x1
96#define VENC_IN_COLOR_18B 0x2
97#define VENC_IN_COLOR_16B 0x3
98
99/* DPI pixel format */
100#define DPI_COLOR_16BIT_CFG_1 0
101#define DPI_COLOR_16BIT_CFG_2 1
102#define DPI_COLOR_16BIT_CFG_3 2
103#define DPI_COLOR_18BIT_CFG_1 3
104#define DPI_COLOR_18BIT_CFG_2 4
105#define DPI_COLOR_24BIT 5
106#define DPI_COLOR_20BIT_YCBCR_422 6
107#define DPI_COLOR_24BIT_YCBCR_422 7
108#define DPI_COLOR_16BIT_YCBCR_422 8
109#define DPI_COLOR_30BIT 9
110#define DPI_COLOR_36BIT 10
111#define DPI_COLOR_12BIT_YCBCR_420 11
112
113#define MIPI_DSI_TOP_DPI_COLOR_MODE GENMASK(23, 20)
114#define MIPI_DSI_TOP_IN_COLOR_MODE GENMASK(18, 16)
115#define MIPI_DSI_TOP_CHROMA_SUBSAMPLE GENMASK(15, 14)
116#define MIPI_DSI_TOP_COMP2_SEL GENMASK(13, 12)
117#define MIPI_DSI_TOP_COMP1_SEL GENMASK(11, 10)
118#define MIPI_DSI_TOP_COMP0_SEL GENMASK(9, 8)
119#define MIPI_DSI_TOP_DE_INVERT BIT(6)
120#define MIPI_DSI_TOP_HSYNC_INVERT BIT(5)
121#define MIPI_DSI_TOP_VSYNC_INVERT BIT(4)
122#define MIPI_DSI_TOP_DPICOLORM BIT(3)
123#define MIPI_DSI_TOP_DPISHUTDN BIT(2)
124
125#define MIPI_DSI_TOP_SUSPEND_CNTL 0x3cc
126#define MIPI_DSI_TOP_SUSPEND_LINE 0x3d0
127#define MIPI_DSI_TOP_SUSPEND_PIX 0x3d4
128#define MIPI_DSI_TOP_MEAS_CNTL 0x3d8
129/* [0] R stat_edpihalt: edpihalt signal from IP. Default 0. */
130#define MIPI_DSI_TOP_STAT 0x3dc
131#define MIPI_DSI_TOP_MEAS_STAT_TE0 0x3e0
132#define MIPI_DSI_TOP_MEAS_STAT_TE1 0x3e4
133#define MIPI_DSI_TOP_MEAS_STAT_VS0 0x3e8
134#define MIPI_DSI_TOP_MEAS_STAT_VS1 0x3ec
135/* [31:16] RW intr_stat/clr. Default 0.
136 * For each bit, read as this interrupt level status,
137 * write 1 to clear.
138 * [31:22] Reserved
139 * [ 21] stat/clr of eof interrupt
140 * [ 21] vde_fall interrupt
141 * [ 19] stat/clr of de_rise interrupt
142 * [ 18] stat/clr of vs_fall interrupt
143 * [ 17] stat/clr of vs_rise interrupt
144 * [ 16] stat/clr of dwc_edpite interrupt
145 * [15: 0] RW intr_enable. Default 0.
146 * For each bit, 1=enable this interrupt, 0=disable.
147 * [15: 6] Reserved
148 * [ 5] eof interrupt
149 * [ 4] de_fall interrupt
150 * [ 3] de_rise interrupt
151 * [ 2] vs_fall interrupt
152 * [ 1] vs_rise interrupt
153 * [ 0] dwc_edpite interrupt
154 */
155#define MIPI_DSI_TOP_INTR_CNTL_STAT 0x3f0
156// 31: 2 Reserved. Default 0.
157// 1: 0 RW mem_pd. Default 3.
158#define MIPI_DSI_TOP_MEM_PD 0x3f4
159
160#endif /* __MESON_DW_MIPI_DSI_H */
161

source code of linux/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h