1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
2 | /* |
3 | * lnbp21.h - driver for lnb supply and control ic lnbp21 |
4 | * |
5 | * Copyright (C) 2006 Oliver Endriss |
6 | * |
7 | * the project's page is at https://linuxtv.org |
8 | */ |
9 | |
10 | #ifndef _LNBP21_H |
11 | #define _LNBP21_H |
12 | |
13 | /* system register bits */ |
14 | /* [RO] 0=OK; 1=over current limit flag */ |
15 | #define LNBP21_OLF 0x01 |
16 | /* [RO] 0=OK; 1=over temperature flag (150 C) */ |
17 | #define LNBP21_OTF 0x02 |
18 | /* [RW] 0=disable LNB power, enable loopthrough |
19 | 1=enable LNB power, disable loopthrough */ |
20 | #define LNBP21_EN 0x04 |
21 | /* [RW] 0=low voltage (13/14V, vert pol) |
22 | 1=high voltage (18/19V,horiz pol) */ |
23 | #define LNBP21_VSEL 0x08 |
24 | /* [RW] increase LNB voltage by 1V: |
25 | 0=13/18V; 1=14/19V */ |
26 | #define LNBP21_LLC 0x10 |
27 | /* [RW] 0=tone controlled by DSQIN pin |
28 | 1=tone enable, disable DSQIN */ |
29 | #define LNBP21_TEN 0x20 |
30 | /* [RW] current limit select: |
31 | 0:Iout=500-650mA Isc=300mA |
32 | 1:Iout=400-550mA Isc=200mA */ |
33 | #define LNBP21_ISEL 0x40 |
34 | /* [RW] short-circuit protect: |
35 | 0=pulsed (dynamic) curr limiting |
36 | 1=static curr limiting */ |
37 | #define LNBP21_PCL 0x80 |
38 | |
39 | #include <linux/dvb/frontend.h> |
40 | |
41 | #if IS_REACHABLE(CONFIG_DVB_LNBP21) |
42 | /* override_set and override_clear control which |
43 | system register bits (above) to always set & clear */ |
44 | extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, |
45 | struct i2c_adapter *i2c, u8 override_set, |
46 | u8 override_clear); |
47 | #else |
48 | static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, |
49 | struct i2c_adapter *i2c, u8 override_set, |
50 | u8 override_clear) |
51 | { |
52 | printk(KERN_WARNING "%s: driver disabled by Kconfig\n" , __func__); |
53 | return NULL; |
54 | } |
55 | #endif |
56 | |
57 | #endif |
58 | |