1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * OmniVision ov9282 Camera Sensor Driver
4 *
5 * Copyright (C) 2021 Intel Corporation
6 */
7#include <asm/unaligned.h>
8
9#include <linux/clk.h>
10#include <linux/delay.h>
11#include <linux/i2c.h>
12#include <linux/module.h>
13#include <linux/pm_runtime.h>
14#include <linux/regulator/consumer.h>
15
16#include <media/v4l2-ctrls.h>
17#include <media/v4l2-event.h>
18#include <media/v4l2-fwnode.h>
19#include <media/v4l2-subdev.h>
20
21/* Streaming Mode */
22#define OV9282_REG_MODE_SELECT 0x0100
23#define OV9282_MODE_STANDBY 0x00
24#define OV9282_MODE_STREAMING 0x01
25
26#define OV9282_REG_PLL_CTRL_0D 0x030d
27#define OV9282_PLL_CTRL_0D_RAW8 0x60
28#define OV9282_PLL_CTRL_0D_RAW10 0x50
29
30#define OV9282_REG_TIMING_HTS 0x380c
31#define OV9282_TIMING_HTS_MAX 0x7fff
32
33/* Lines per frame */
34#define OV9282_REG_LPFR 0x380e
35
36/* Chip ID */
37#define OV9282_REG_ID 0x300a
38#define OV9282_ID 0x9281
39
40/* Exposure control */
41#define OV9282_REG_EXPOSURE 0x3500
42#define OV9282_EXPOSURE_MIN 1
43#define OV9282_EXPOSURE_OFFSET 12
44#define OV9282_EXPOSURE_STEP 1
45#define OV9282_EXPOSURE_DEFAULT 0x0282
46
47/* Analog gain control */
48#define OV9282_REG_AGAIN 0x3509
49#define OV9282_AGAIN_MIN 0x10
50#define OV9282_AGAIN_MAX 0xff
51#define OV9282_AGAIN_STEP 1
52#define OV9282_AGAIN_DEFAULT 0x10
53
54/* Group hold register */
55#define OV9282_REG_HOLD 0x3308
56
57#define OV9282_REG_ANA_CORE_2 0x3662
58#define OV9282_ANA_CORE2_RAW8 0x07
59#define OV9282_ANA_CORE2_RAW10 0x05
60
61#define OV9282_REG_TIMING_FORMAT_1 0x3820
62#define OV9282_REG_TIMING_FORMAT_2 0x3821
63#define OV9282_FLIP_BIT BIT(2)
64
65#define OV9282_REG_MIPI_CTRL00 0x4800
66#define OV9282_GATED_CLOCK BIT(5)
67
68/* Input clock rate */
69#define OV9282_INCLK_RATE 24000000
70
71/* CSI2 HW configuration */
72#define OV9282_LINK_FREQ 400000000
73#define OV9282_NUM_DATA_LANES 2
74
75/* Pixel rate */
76#define OV9282_PIXEL_RATE_10BIT (OV9282_LINK_FREQ * 2 * \
77 OV9282_NUM_DATA_LANES / 10)
78#define OV9282_PIXEL_RATE_8BIT (OV9282_LINK_FREQ * 2 * \
79 OV9282_NUM_DATA_LANES / 8)
80
81/*
82 * OV9282 native and active pixel array size.
83 * 8 dummy rows/columns on each edge of a 1280x800 active array
84 */
85#define OV9282_NATIVE_WIDTH 1296U
86#define OV9282_NATIVE_HEIGHT 816U
87#define OV9282_PIXEL_ARRAY_LEFT 8U
88#define OV9282_PIXEL_ARRAY_TOP 8U
89#define OV9282_PIXEL_ARRAY_WIDTH 1280U
90#define OV9282_PIXEL_ARRAY_HEIGHT 800U
91
92#define OV9282_REG_MIN 0x00
93#define OV9282_REG_MAX 0xfffff
94
95static const char * const ov9282_supply_names[] = {
96 "avdd", /* Analog power */
97 "dovdd", /* Digital I/O power */
98 "dvdd", /* Digital core power */
99};
100
101#define OV9282_NUM_SUPPLIES ARRAY_SIZE(ov9282_supply_names)
102
103/**
104 * struct ov9282_reg - ov9282 sensor register
105 * @address: Register address
106 * @val: Register value
107 */
108struct ov9282_reg {
109 u16 address;
110 u8 val;
111};
112
113/**
114 * struct ov9282_reg_list - ov9282 sensor register list
115 * @num_of_regs: Number of registers in the list
116 * @regs: Pointer to register list
117 */
118struct ov9282_reg_list {
119 u32 num_of_regs;
120 const struct ov9282_reg *regs;
121};
122
123/**
124 * struct ov9282_mode - ov9282 sensor mode structure
125 * @width: Frame width
126 * @height: Frame height
127 * @hblank_min: Minimum horizontal blanking in lines for non-continuous[0] and
128 * continuous[1] clock modes
129 * @vblank: Vertical blanking in lines
130 * @vblank_min: Minimum vertical blanking in lines
131 * @vblank_max: Maximum vertical blanking in lines
132 * @link_freq_idx: Link frequency index
133 * @crop: on-sensor cropping for this mode
134 * @reg_list: Register list for sensor mode
135 */
136struct ov9282_mode {
137 u32 width;
138 u32 height;
139 u32 hblank_min[2];
140 u32 vblank;
141 u32 vblank_min;
142 u32 vblank_max;
143 u32 link_freq_idx;
144 struct v4l2_rect crop;
145 struct ov9282_reg_list reg_list;
146};
147
148/**
149 * struct ov9282 - ov9282 sensor device structure
150 * @dev: Pointer to generic device
151 * @sd: V4L2 sub-device
152 * @pad: Media pad. Only one pad supported
153 * @reset_gpio: Sensor reset gpio
154 * @inclk: Sensor input clock
155 * @supplies: Regulator supplies for the sensor
156 * @ctrl_handler: V4L2 control handler
157 * @link_freq_ctrl: Pointer to link frequency control
158 * @hblank_ctrl: Pointer to horizontal blanking control
159 * @vblank_ctrl: Pointer to vertical blanking control
160 * @exp_ctrl: Pointer to exposure control
161 * @again_ctrl: Pointer to analog gain control
162 * @pixel_rate: Pointer to pixel rate control
163 * @vblank: Vertical blanking in lines
164 * @noncontinuous_clock: Selection of CSI2 noncontinuous clock mode
165 * @cur_mode: Pointer to current selected sensor mode
166 * @code: Mbus code currently selected
167 * @mutex: Mutex for serializing sensor controls
168 */
169struct ov9282 {
170 struct device *dev;
171 struct v4l2_subdev sd;
172 struct media_pad pad;
173 struct gpio_desc *reset_gpio;
174 struct clk *inclk;
175 struct regulator_bulk_data supplies[OV9282_NUM_SUPPLIES];
176 struct v4l2_ctrl_handler ctrl_handler;
177 struct v4l2_ctrl *link_freq_ctrl;
178 struct v4l2_ctrl *hblank_ctrl;
179 struct v4l2_ctrl *vblank_ctrl;
180 struct {
181 struct v4l2_ctrl *exp_ctrl;
182 struct v4l2_ctrl *again_ctrl;
183 };
184 struct v4l2_ctrl *pixel_rate;
185 u32 vblank;
186 bool noncontinuous_clock;
187 const struct ov9282_mode *cur_mode;
188 u32 code;
189 struct mutex mutex;
190};
191
192static const s64 link_freq[] = {
193 OV9282_LINK_FREQ,
194};
195
196/*
197 * Common registers
198 *
199 * Note: Do NOT include a software reset (0x0103, 0x01) in any of these
200 * register arrays as some settings are written as part of ov9282_power_on,
201 * and the reset will clear them.
202 */
203static const struct ov9282_reg common_regs[] = {
204 {0x0302, 0x32},
205 {0x030e, 0x02},
206 {0x3001, 0x00},
207 {0x3004, 0x00},
208 {0x3005, 0x00},
209 {0x3006, 0x04},
210 {0x3011, 0x0a},
211 {0x3013, 0x18},
212 {0x301c, 0xf0},
213 {0x3022, 0x01},
214 {0x3030, 0x10},
215 {0x3039, 0x32},
216 {0x303a, 0x00},
217 {0x3503, 0x08},
218 {0x3505, 0x8c},
219 {0x3507, 0x03},
220 {0x3508, 0x00},
221 {0x3610, 0x80},
222 {0x3611, 0xa0},
223 {0x3620, 0x6e},
224 {0x3632, 0x56},
225 {0x3633, 0x78},
226 {0x3666, 0x00},
227 {0x366f, 0x5a},
228 {0x3680, 0x84},
229 {0x3712, 0x80},
230 {0x372d, 0x22},
231 {0x3731, 0x80},
232 {0x3732, 0x30},
233 {0x377d, 0x22},
234 {0x3788, 0x02},
235 {0x3789, 0xa4},
236 {0x378a, 0x00},
237 {0x378b, 0x4a},
238 {0x3799, 0x20},
239 {0x3881, 0x42},
240 {0x38a8, 0x02},
241 {0x38a9, 0x80},
242 {0x38b1, 0x00},
243 {0x38c4, 0x00},
244 {0x38c5, 0xc0},
245 {0x38c6, 0x04},
246 {0x38c7, 0x80},
247 {0x3920, 0xff},
248 {0x4010, 0x40},
249 {0x4043, 0x40},
250 {0x4307, 0x30},
251 {0x4317, 0x00},
252 {0x4501, 0x00},
253 {0x450a, 0x08},
254 {0x4601, 0x04},
255 {0x470f, 0x00},
256 {0x4f07, 0x00},
257 {0x5000, 0x9f},
258 {0x5001, 0x00},
259 {0x5e00, 0x00},
260 {0x5d00, 0x07},
261 {0x5d01, 0x00},
262 {0x0101, 0x01},
263 {0x1000, 0x03},
264 {0x5a08, 0x84},
265};
266
267static struct ov9282_reg_list common_regs_list = {
268 .num_of_regs = ARRAY_SIZE(common_regs),
269 .regs = common_regs,
270};
271
272#define MODE_1280_800 0
273#define MODE_1280_720 1
274#define MODE_640_400 2
275
276#define DEFAULT_MODE MODE_1280_720
277
278/* Sensor mode registers */
279static const struct ov9282_reg mode_1280x800_regs[] = {
280 {0x3778, 0x00},
281 {0x3800, 0x00},
282 {0x3801, 0x00},
283 {0x3802, 0x00},
284 {0x3803, 0x00},
285 {0x3804, 0x05},
286 {0x3805, 0x0f},
287 {0x3806, 0x03},
288 {0x3807, 0x2f},
289 {0x3808, 0x05},
290 {0x3809, 0x00},
291 {0x380a, 0x03},
292 {0x380b, 0x20},
293 {0x3810, 0x00},
294 {0x3811, 0x08},
295 {0x3812, 0x00},
296 {0x3813, 0x08},
297 {0x3814, 0x11},
298 {0x3815, 0x11},
299 {0x3820, 0x40},
300 {0x3821, 0x00},
301 {0x4003, 0x40},
302 {0x4008, 0x04},
303 {0x4009, 0x0b},
304 {0x400c, 0x00},
305 {0x400d, 0x07},
306 {0x4507, 0x00},
307 {0x4509, 0x00},
308};
309
310static const struct ov9282_reg mode_1280x720_regs[] = {
311 {0x3778, 0x00},
312 {0x3800, 0x00},
313 {0x3801, 0x00},
314 {0x3802, 0x00},
315 {0x3803, 0x00},
316 {0x3804, 0x05},
317 {0x3805, 0x0f},
318 {0x3806, 0x02},
319 {0x3807, 0xdf},
320 {0x3808, 0x05},
321 {0x3809, 0x00},
322 {0x380a, 0x02},
323 {0x380b, 0xd0},
324 {0x3810, 0x00},
325 {0x3811, 0x08},
326 {0x3812, 0x00},
327 {0x3813, 0x08},
328 {0x3814, 0x11},
329 {0x3815, 0x11},
330 {0x3820, 0x3c},
331 {0x3821, 0x84},
332 {0x4003, 0x40},
333 {0x4008, 0x02},
334 {0x4009, 0x05},
335 {0x400c, 0x00},
336 {0x400d, 0x03},
337 {0x4507, 0x00},
338 {0x4509, 0x80},
339};
340
341static const struct ov9282_reg mode_640x400_regs[] = {
342 {0x3778, 0x10},
343 {0x3800, 0x00},
344 {0x3801, 0x00},
345 {0x3802, 0x00},
346 {0x3803, 0x00},
347 {0x3804, 0x05},
348 {0x3805, 0x0f},
349 {0x3806, 0x03},
350 {0x3807, 0x2f},
351 {0x3808, 0x02},
352 {0x3809, 0x80},
353 {0x380a, 0x01},
354 {0x380b, 0x90},
355 {0x3810, 0x00},
356 {0x3811, 0x04},
357 {0x3812, 0x00},
358 {0x3813, 0x04},
359 {0x3814, 0x31},
360 {0x3815, 0x22},
361 {0x3820, 0x60},
362 {0x3821, 0x01},
363 {0x4008, 0x02},
364 {0x4009, 0x05},
365 {0x400c, 0x00},
366 {0x400d, 0x03},
367 {0x4507, 0x03},
368 {0x4509, 0x80},
369};
370
371/* Supported sensor mode configurations */
372static const struct ov9282_mode supported_modes[] = {
373 [MODE_1280_800] = {
374 .width = 1280,
375 .height = 800,
376 .hblank_min = { 250, 176 },
377 .vblank = 1022,
378 .vblank_min = 110,
379 .vblank_max = 51540,
380 .link_freq_idx = 0,
381 .crop = {
382 .left = OV9282_PIXEL_ARRAY_LEFT,
383 .top = OV9282_PIXEL_ARRAY_TOP,
384 .width = 1280,
385 .height = 800
386 },
387 .reg_list = {
388 .num_of_regs = ARRAY_SIZE(mode_1280x800_regs),
389 .regs = mode_1280x800_regs,
390 },
391 },
392 [MODE_1280_720] = {
393 .width = 1280,
394 .height = 720,
395 .hblank_min = { 250, 176 },
396 .vblank = 1022,
397 .vblank_min = 41,
398 .vblank_max = 51540,
399 .link_freq_idx = 0,
400 .crop = {
401 /*
402 * Note that this mode takes the top 720 lines from the
403 * 800 of the sensor. It does not take a middle crop.
404 */
405 .left = OV9282_PIXEL_ARRAY_LEFT,
406 .top = OV9282_PIXEL_ARRAY_TOP,
407 .width = 1280,
408 .height = 720
409 },
410 .reg_list = {
411 .num_of_regs = ARRAY_SIZE(mode_1280x720_regs),
412 .regs = mode_1280x720_regs,
413 },
414 },
415 [MODE_640_400] = {
416 .width = 640,
417 .height = 400,
418 .hblank_min = { 890, 816 },
419 .vblank = 1022,
420 .vblank_min = 22,
421 .vblank_max = 51540,
422 .link_freq_idx = 0,
423 .crop = {
424 .left = OV9282_PIXEL_ARRAY_LEFT,
425 .top = OV9282_PIXEL_ARRAY_TOP,
426 .width = 1280,
427 .height = 800
428 },
429 .reg_list = {
430 .num_of_regs = ARRAY_SIZE(mode_640x400_regs),
431 .regs = mode_640x400_regs,
432 },
433 },
434};
435
436/**
437 * to_ov9282() - ov9282 V4L2 sub-device to ov9282 device.
438 * @subdev: pointer to ov9282 V4L2 sub-device
439 *
440 * Return: pointer to ov9282 device
441 */
442static inline struct ov9282 *to_ov9282(struct v4l2_subdev *subdev)
443{
444 return container_of(subdev, struct ov9282, sd);
445}
446
447/**
448 * ov9282_read_reg() - Read registers.
449 * @ov9282: pointer to ov9282 device
450 * @reg: register address
451 * @len: length of bytes to read. Max supported bytes is 4
452 * @val: pointer to register value to be filled.
453 *
454 * Return: 0 if successful, error code otherwise.
455 */
456static int ov9282_read_reg(struct ov9282 *ov9282, u16 reg, u32 len, u32 *val)
457{
458 struct i2c_client *client = v4l2_get_subdevdata(sd: &ov9282->sd);
459 struct i2c_msg msgs[2] = {0};
460 u8 addr_buf[2] = {0};
461 u8 data_buf[4] = {0};
462 int ret;
463
464 if (WARN_ON(len > 4))
465 return -EINVAL;
466
467 put_unaligned_be16(val: reg, p: addr_buf);
468
469 /* Write register address */
470 msgs[0].addr = client->addr;
471 msgs[0].flags = 0;
472 msgs[0].len = ARRAY_SIZE(addr_buf);
473 msgs[0].buf = addr_buf;
474
475 /* Read data from register */
476 msgs[1].addr = client->addr;
477 msgs[1].flags = I2C_M_RD;
478 msgs[1].len = len;
479 msgs[1].buf = &data_buf[4 - len];
480
481 ret = i2c_transfer(adap: client->adapter, msgs, ARRAY_SIZE(msgs));
482 if (ret != ARRAY_SIZE(msgs))
483 return -EIO;
484
485 *val = get_unaligned_be32(p: data_buf);
486
487 return 0;
488}
489
490/**
491 * ov9282_write_reg() - Write register
492 * @ov9282: pointer to ov9282 device
493 * @reg: register address
494 * @len: length of bytes. Max supported bytes is 4
495 * @val: register value
496 *
497 * Return: 0 if successful, error code otherwise.
498 */
499static int ov9282_write_reg(struct ov9282 *ov9282, u16 reg, u32 len, u32 val)
500{
501 struct i2c_client *client = v4l2_get_subdevdata(sd: &ov9282->sd);
502 u8 buf[6] = {0};
503
504 if (WARN_ON(len > 4))
505 return -EINVAL;
506
507 put_unaligned_be16(val: reg, p: buf);
508 put_unaligned_be32(val: val << (8 * (4 - len)), p: buf + 2);
509 if (i2c_master_send(client, buf, count: len + 2) != len + 2)
510 return -EIO;
511
512 return 0;
513}
514
515/**
516 * ov9282_write_regs() - Write a list of registers
517 * @ov9282: pointer to ov9282 device
518 * @regs: list of registers to be written
519 * @len: length of registers array
520 *
521 * Return: 0 if successful, error code otherwise.
522 */
523static int ov9282_write_regs(struct ov9282 *ov9282,
524 const struct ov9282_reg *regs, u32 len)
525{
526 unsigned int i;
527 int ret;
528
529 for (i = 0; i < len; i++) {
530 ret = ov9282_write_reg(ov9282, reg: regs[i].address, len: 1, val: regs[i].val);
531 if (ret)
532 return ret;
533 }
534
535 return 0;
536}
537
538/**
539 * ov9282_update_controls() - Update control ranges based on streaming mode
540 * @ov9282: pointer to ov9282 device
541 * @mode: pointer to ov9282_mode sensor mode
542 * @fmt: pointer to the requested mode
543 *
544 * Return: 0 if successful, error code otherwise.
545 */
546static int ov9282_update_controls(struct ov9282 *ov9282,
547 const struct ov9282_mode *mode,
548 const struct v4l2_subdev_format *fmt)
549{
550 u32 hblank_min;
551 s64 pixel_rate;
552 int ret;
553
554 ret = __v4l2_ctrl_s_ctrl(ctrl: ov9282->link_freq_ctrl, val: mode->link_freq_idx);
555 if (ret)
556 return ret;
557
558 pixel_rate = (fmt->format.code == MEDIA_BUS_FMT_Y10_1X10) ?
559 OV9282_PIXEL_RATE_10BIT : OV9282_PIXEL_RATE_8BIT;
560 ret = __v4l2_ctrl_modify_range(ctrl: ov9282->pixel_rate, min: pixel_rate,
561 max: pixel_rate, step: 1, def: pixel_rate);
562 if (ret)
563 return ret;
564
565 hblank_min = mode->hblank_min[ov9282->noncontinuous_clock ? 0 : 1];
566 ret = __v4l2_ctrl_modify_range(ctrl: ov9282->hblank_ctrl, min: hblank_min,
567 OV9282_TIMING_HTS_MAX - mode->width, step: 1,
568 def: hblank_min);
569 if (ret)
570 return ret;
571
572 return __v4l2_ctrl_modify_range(ctrl: ov9282->vblank_ctrl, min: mode->vblank_min,
573 max: mode->vblank_max, step: 1, def: mode->vblank);
574}
575
576/**
577 * ov9282_update_exp_gain() - Set updated exposure and gain
578 * @ov9282: pointer to ov9282 device
579 * @exposure: updated exposure value
580 * @gain: updated analog gain value
581 *
582 * Return: 0 if successful, error code otherwise.
583 */
584static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain)
585{
586 int ret;
587
588 dev_dbg(ov9282->dev, "Set exp %u, analog gain %u",
589 exposure, gain);
590
591 ret = ov9282_write_reg(ov9282, OV9282_REG_HOLD, len: 1, val: 1);
592 if (ret)
593 return ret;
594
595 ret = ov9282_write_reg(ov9282, OV9282_REG_EXPOSURE, len: 3, val: exposure << 4);
596 if (ret)
597 goto error_release_group_hold;
598
599 ret = ov9282_write_reg(ov9282, OV9282_REG_AGAIN, len: 1, val: gain);
600
601error_release_group_hold:
602 ov9282_write_reg(ov9282, OV9282_REG_HOLD, len: 1, val: 0);
603
604 return ret;
605}
606
607static int ov9282_set_ctrl_hflip(struct ov9282 *ov9282, int value)
608{
609 u32 current_val;
610 int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, len: 1,
611 val: &current_val);
612 if (ret)
613 return ret;
614
615 if (value)
616 current_val |= OV9282_FLIP_BIT;
617 else
618 current_val &= ~OV9282_FLIP_BIT;
619
620 return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, len: 1,
621 val: current_val);
622}
623
624static int ov9282_set_ctrl_vflip(struct ov9282 *ov9282, int value)
625{
626 u32 current_val;
627 int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, len: 1,
628 val: &current_val);
629 if (ret)
630 return ret;
631
632 if (value)
633 current_val |= OV9282_FLIP_BIT;
634 else
635 current_val &= ~OV9282_FLIP_BIT;
636
637 return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, len: 1,
638 val: current_val);
639}
640
641/**
642 * ov9282_set_ctrl() - Set subdevice control
643 * @ctrl: pointer to v4l2_ctrl structure
644 *
645 * Supported controls:
646 * - V4L2_CID_VBLANK
647 * - cluster controls:
648 * - V4L2_CID_ANALOGUE_GAIN
649 * - V4L2_CID_EXPOSURE
650 *
651 * Return: 0 if successful, error code otherwise.
652 */
653static int ov9282_set_ctrl(struct v4l2_ctrl *ctrl)
654{
655 struct ov9282 *ov9282 =
656 container_of(ctrl->handler, struct ov9282, ctrl_handler);
657 u32 analog_gain;
658 u32 exposure;
659 u32 lpfr;
660 int ret;
661
662 switch (ctrl->id) {
663 case V4L2_CID_VBLANK:
664 ov9282->vblank = ov9282->vblank_ctrl->val;
665
666 dev_dbg(ov9282->dev, "Received vblank %u, new lpfr %u",
667 ov9282->vblank,
668 ov9282->vblank + ov9282->cur_mode->height);
669
670 ret = __v4l2_ctrl_modify_range(ctrl: ov9282->exp_ctrl,
671 OV9282_EXPOSURE_MIN,
672 max: ov9282->vblank +
673 ov9282->cur_mode->height -
674 OV9282_EXPOSURE_OFFSET,
675 step: 1, OV9282_EXPOSURE_DEFAULT);
676 break;
677 }
678
679 /* Set controls only if sensor is in power on state */
680 if (!pm_runtime_get_if_in_use(dev: ov9282->dev))
681 return 0;
682
683 switch (ctrl->id) {
684 case V4L2_CID_EXPOSURE:
685 exposure = ctrl->val;
686 analog_gain = ov9282->again_ctrl->val;
687
688 dev_dbg(ov9282->dev, "Received exp %u, analog gain %u",
689 exposure, analog_gain);
690
691 ret = ov9282_update_exp_gain(ov9282, exposure, gain: analog_gain);
692 break;
693 case V4L2_CID_VBLANK:
694 lpfr = ov9282->vblank + ov9282->cur_mode->height;
695 ret = ov9282_write_reg(ov9282, OV9282_REG_LPFR, len: 2, val: lpfr);
696 break;
697 case V4L2_CID_HFLIP:
698 ret = ov9282_set_ctrl_hflip(ov9282, value: ctrl->val);
699 break;
700 case V4L2_CID_VFLIP:
701 ret = ov9282_set_ctrl_vflip(ov9282, value: ctrl->val);
702 break;
703 case V4L2_CID_HBLANK:
704 ret = ov9282_write_reg(ov9282, OV9282_REG_TIMING_HTS, len: 2,
705 val: (ctrl->val + ov9282->cur_mode->width) >> 1);
706 break;
707 default:
708 dev_err(ov9282->dev, "Invalid control %d", ctrl->id);
709 ret = -EINVAL;
710 }
711
712 pm_runtime_put(dev: ov9282->dev);
713
714 return ret;
715}
716
717/* V4l2 subdevice control ops*/
718static const struct v4l2_ctrl_ops ov9282_ctrl_ops = {
719 .s_ctrl = ov9282_set_ctrl,
720};
721
722/**
723 * ov9282_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes
724 * @sd: pointer to ov9282 V4L2 sub-device structure
725 * @sd_state: V4L2 sub-device configuration
726 * @code: V4L2 sub-device code enumeration need to be filled
727 *
728 * Return: 0 if successful, error code otherwise.
729 */
730static int ov9282_enum_mbus_code(struct v4l2_subdev *sd,
731 struct v4l2_subdev_state *sd_state,
732 struct v4l2_subdev_mbus_code_enum *code)
733{
734 switch (code->index) {
735 case 0:
736 code->code = MEDIA_BUS_FMT_Y10_1X10;
737 break;
738 case 1:
739 code->code = MEDIA_BUS_FMT_Y8_1X8;
740 break;
741 default:
742 return -EINVAL;
743 }
744
745 return 0;
746}
747
748/**
749 * ov9282_enum_frame_size() - Enumerate V4L2 sub-device frame sizes
750 * @sd: pointer to ov9282 V4L2 sub-device structure
751 * @sd_state: V4L2 sub-device configuration
752 * @fsize: V4L2 sub-device size enumeration need to be filled
753 *
754 * Return: 0 if successful, error code otherwise.
755 */
756static int ov9282_enum_frame_size(struct v4l2_subdev *sd,
757 struct v4l2_subdev_state *sd_state,
758 struct v4l2_subdev_frame_size_enum *fsize)
759{
760 if (fsize->index >= ARRAY_SIZE(supported_modes))
761 return -EINVAL;
762
763 if (fsize->code != MEDIA_BUS_FMT_Y10_1X10 &&
764 fsize->code != MEDIA_BUS_FMT_Y8_1X8)
765 return -EINVAL;
766
767 fsize->min_width = supported_modes[fsize->index].width;
768 fsize->max_width = fsize->min_width;
769 fsize->min_height = supported_modes[fsize->index].height;
770 fsize->max_height = fsize->min_height;
771
772 return 0;
773}
774
775/**
776 * ov9282_fill_pad_format() - Fill subdevice pad format
777 * from selected sensor mode
778 * @ov9282: pointer to ov9282 device
779 * @mode: pointer to ov9282_mode sensor mode
780 * @code: mbus code to be stored
781 * @fmt: V4L2 sub-device format need to be filled
782 */
783static void ov9282_fill_pad_format(struct ov9282 *ov9282,
784 const struct ov9282_mode *mode,
785 u32 code,
786 struct v4l2_subdev_format *fmt)
787{
788 fmt->format.width = mode->width;
789 fmt->format.height = mode->height;
790 fmt->format.code = code;
791 fmt->format.field = V4L2_FIELD_NONE;
792 fmt->format.colorspace = V4L2_COLORSPACE_RAW;
793 fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
794 fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT;
795 fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
796}
797
798/**
799 * ov9282_get_pad_format() - Get subdevice pad format
800 * @sd: pointer to ov9282 V4L2 sub-device structure
801 * @sd_state: V4L2 sub-device configuration
802 * @fmt: V4L2 sub-device format need to be set
803 *
804 * Return: 0 if successful, error code otherwise.
805 */
806static int ov9282_get_pad_format(struct v4l2_subdev *sd,
807 struct v4l2_subdev_state *sd_state,
808 struct v4l2_subdev_format *fmt)
809{
810 struct ov9282 *ov9282 = to_ov9282(subdev: sd);
811
812 mutex_lock(&ov9282->mutex);
813
814 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
815 struct v4l2_mbus_framefmt *framefmt;
816
817 framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
818 fmt->format = *framefmt;
819 } else {
820 ov9282_fill_pad_format(ov9282, mode: ov9282->cur_mode, code: ov9282->code,
821 fmt);
822 }
823
824 mutex_unlock(lock: &ov9282->mutex);
825
826 return 0;
827}
828
829/**
830 * ov9282_set_pad_format() - Set subdevice pad format
831 * @sd: pointer to ov9282 V4L2 sub-device structure
832 * @sd_state: V4L2 sub-device configuration
833 * @fmt: V4L2 sub-device format need to be set
834 *
835 * Return: 0 if successful, error code otherwise.
836 */
837static int ov9282_set_pad_format(struct v4l2_subdev *sd,
838 struct v4l2_subdev_state *sd_state,
839 struct v4l2_subdev_format *fmt)
840{
841 struct ov9282 *ov9282 = to_ov9282(subdev: sd);
842 const struct ov9282_mode *mode;
843 u32 code;
844 int ret = 0;
845
846 mutex_lock(&ov9282->mutex);
847
848 mode = v4l2_find_nearest_size(supported_modes,
849 ARRAY_SIZE(supported_modes),
850 width, height,
851 fmt->format.width,
852 fmt->format.height);
853 if (fmt->format.code == MEDIA_BUS_FMT_Y8_1X8)
854 code = MEDIA_BUS_FMT_Y8_1X8;
855 else
856 code = MEDIA_BUS_FMT_Y10_1X10;
857
858 ov9282_fill_pad_format(ov9282, mode, code, fmt);
859
860 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
861 struct v4l2_mbus_framefmt *framefmt;
862
863 framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
864 *framefmt = fmt->format;
865 } else {
866 ret = ov9282_update_controls(ov9282, mode, fmt);
867 if (!ret) {
868 ov9282->cur_mode = mode;
869 ov9282->code = code;
870 }
871 }
872
873 mutex_unlock(lock: &ov9282->mutex);
874
875 return ret;
876}
877
878/**
879 * ov9282_init_state() - Initialize sub-device state
880 * @sd: pointer to ov9282 V4L2 sub-device structure
881 * @sd_state: V4L2 sub-device configuration
882 *
883 * Return: 0 if successful, error code otherwise.
884 */
885static int ov9282_init_state(struct v4l2_subdev *sd,
886 struct v4l2_subdev_state *sd_state)
887{
888 struct ov9282 *ov9282 = to_ov9282(subdev: sd);
889 struct v4l2_subdev_format fmt = { 0 };
890
891 fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
892 ov9282_fill_pad_format(ov9282, mode: &supported_modes[DEFAULT_MODE],
893 code: ov9282->code, fmt: &fmt);
894
895 return ov9282_set_pad_format(sd, sd_state, fmt: &fmt);
896}
897
898static const struct v4l2_rect *
899__ov9282_get_pad_crop(struct ov9282 *ov9282,
900 struct v4l2_subdev_state *sd_state,
901 unsigned int pad, enum v4l2_subdev_format_whence which)
902{
903 switch (which) {
904 case V4L2_SUBDEV_FORMAT_TRY:
905 return v4l2_subdev_state_get_crop(sd_state, pad);
906 case V4L2_SUBDEV_FORMAT_ACTIVE:
907 return &ov9282->cur_mode->crop;
908 }
909
910 return NULL;
911}
912
913static int ov9282_get_selection(struct v4l2_subdev *sd,
914 struct v4l2_subdev_state *sd_state,
915 struct v4l2_subdev_selection *sel)
916{
917 switch (sel->target) {
918 case V4L2_SEL_TGT_CROP: {
919 struct ov9282 *ov9282 = to_ov9282(subdev: sd);
920
921 mutex_lock(&ov9282->mutex);
922 sel->r = *__ov9282_get_pad_crop(ov9282, sd_state, pad: sel->pad,
923 which: sel->which);
924 mutex_unlock(lock: &ov9282->mutex);
925
926 return 0;
927 }
928
929 case V4L2_SEL_TGT_NATIVE_SIZE:
930 sel->r.top = 0;
931 sel->r.left = 0;
932 sel->r.width = OV9282_NATIVE_WIDTH;
933 sel->r.height = OV9282_NATIVE_HEIGHT;
934
935 return 0;
936
937 case V4L2_SEL_TGT_CROP_DEFAULT:
938 case V4L2_SEL_TGT_CROP_BOUNDS:
939 sel->r.top = OV9282_PIXEL_ARRAY_TOP;
940 sel->r.left = OV9282_PIXEL_ARRAY_LEFT;
941 sel->r.width = OV9282_PIXEL_ARRAY_WIDTH;
942 sel->r.height = OV9282_PIXEL_ARRAY_HEIGHT;
943
944 return 0;
945 }
946
947 return -EINVAL;
948}
949
950/**
951 * ov9282_start_streaming() - Start sensor stream
952 * @ov9282: pointer to ov9282 device
953 *
954 * Return: 0 if successful, error code otherwise.
955 */
956static int ov9282_start_streaming(struct ov9282 *ov9282)
957{
958 const struct ov9282_reg bitdepth_regs[2][2] = {
959 {
960 {OV9282_REG_PLL_CTRL_0D, OV9282_PLL_CTRL_0D_RAW10},
961 {OV9282_REG_ANA_CORE_2, OV9282_ANA_CORE2_RAW10},
962 }, {
963 {OV9282_REG_PLL_CTRL_0D, OV9282_PLL_CTRL_0D_RAW8},
964 {OV9282_REG_ANA_CORE_2, OV9282_ANA_CORE2_RAW8},
965 }
966 };
967 const struct ov9282_reg_list *reg_list;
968 int bitdepth_index;
969 int ret;
970
971 /* Write common registers */
972 ret = ov9282_write_regs(ov9282, regs: common_regs_list.regs,
973 len: common_regs_list.num_of_regs);
974 if (ret) {
975 dev_err(ov9282->dev, "fail to write common registers");
976 return ret;
977 }
978
979 bitdepth_index = ov9282->code == MEDIA_BUS_FMT_Y10_1X10 ? 0 : 1;
980 ret = ov9282_write_regs(ov9282, regs: bitdepth_regs[bitdepth_index], len: 2);
981 if (ret) {
982 dev_err(ov9282->dev, "fail to write bitdepth regs");
983 return ret;
984 }
985
986 /* Write sensor mode registers */
987 reg_list = &ov9282->cur_mode->reg_list;
988 ret = ov9282_write_regs(ov9282, regs: reg_list->regs, len: reg_list->num_of_regs);
989 if (ret) {
990 dev_err(ov9282->dev, "fail to write initial registers");
991 return ret;
992 }
993
994 /* Setup handler will write actual exposure and gain */
995 ret = __v4l2_ctrl_handler_setup(hdl: ov9282->sd.ctrl_handler);
996 if (ret) {
997 dev_err(ov9282->dev, "fail to setup handler");
998 return ret;
999 }
1000
1001 /* Start streaming */
1002 ret = ov9282_write_reg(ov9282, OV9282_REG_MODE_SELECT,
1003 len: 1, OV9282_MODE_STREAMING);
1004 if (ret) {
1005 dev_err(ov9282->dev, "fail to start streaming");
1006 return ret;
1007 }
1008
1009 return 0;
1010}
1011
1012/**
1013 * ov9282_stop_streaming() - Stop sensor stream
1014 * @ov9282: pointer to ov9282 device
1015 *
1016 * Return: 0 if successful, error code otherwise.
1017 */
1018static int ov9282_stop_streaming(struct ov9282 *ov9282)
1019{
1020 return ov9282_write_reg(ov9282, OV9282_REG_MODE_SELECT,
1021 len: 1, OV9282_MODE_STANDBY);
1022}
1023
1024/**
1025 * ov9282_set_stream() - Enable sensor streaming
1026 * @sd: pointer to ov9282 subdevice
1027 * @enable: set to enable sensor streaming
1028 *
1029 * Return: 0 if successful, error code otherwise.
1030 */
1031static int ov9282_set_stream(struct v4l2_subdev *sd, int enable)
1032{
1033 struct ov9282 *ov9282 = to_ov9282(subdev: sd);
1034 int ret;
1035
1036 mutex_lock(&ov9282->mutex);
1037
1038 if (enable) {
1039 ret = pm_runtime_resume_and_get(dev: ov9282->dev);
1040 if (ret)
1041 goto error_unlock;
1042
1043 ret = ov9282_start_streaming(ov9282);
1044 if (ret)
1045 goto error_power_off;
1046 } else {
1047 ov9282_stop_streaming(ov9282);
1048 pm_runtime_put(dev: ov9282->dev);
1049 }
1050
1051 mutex_unlock(lock: &ov9282->mutex);
1052
1053 return 0;
1054
1055error_power_off:
1056 pm_runtime_put(dev: ov9282->dev);
1057error_unlock:
1058 mutex_unlock(lock: &ov9282->mutex);
1059
1060 return ret;
1061}
1062
1063/**
1064 * ov9282_detect() - Detect ov9282 sensor
1065 * @ov9282: pointer to ov9282 device
1066 *
1067 * Return: 0 if successful, -EIO if sensor id does not match
1068 */
1069static int ov9282_detect(struct ov9282 *ov9282)
1070{
1071 int ret;
1072 u32 val;
1073
1074 ret = ov9282_read_reg(ov9282, OV9282_REG_ID, len: 2, val: &val);
1075 if (ret)
1076 return ret;
1077
1078 if (val != OV9282_ID) {
1079 dev_err(ov9282->dev, "chip id mismatch: %x!=%x",
1080 OV9282_ID, val);
1081 return -ENXIO;
1082 }
1083
1084 return 0;
1085}
1086
1087static int ov9282_configure_regulators(struct ov9282 *ov9282)
1088{
1089 unsigned int i;
1090
1091 for (i = 0; i < OV9282_NUM_SUPPLIES; i++)
1092 ov9282->supplies[i].supply = ov9282_supply_names[i];
1093
1094 return devm_regulator_bulk_get(dev: ov9282->dev,
1095 OV9282_NUM_SUPPLIES,
1096 consumers: ov9282->supplies);
1097}
1098
1099/**
1100 * ov9282_parse_hw_config() - Parse HW configuration and check if supported
1101 * @ov9282: pointer to ov9282 device
1102 *
1103 * Return: 0 if successful, error code otherwise.
1104 */
1105static int ov9282_parse_hw_config(struct ov9282 *ov9282)
1106{
1107 struct fwnode_handle *fwnode = dev_fwnode(ov9282->dev);
1108 struct v4l2_fwnode_endpoint bus_cfg = {
1109 .bus_type = V4L2_MBUS_CSI2_DPHY
1110 };
1111 struct fwnode_handle *ep;
1112 unsigned long rate;
1113 unsigned int i;
1114 int ret;
1115
1116 if (!fwnode)
1117 return -ENXIO;
1118
1119 /* Request optional reset pin */
1120 ov9282->reset_gpio = devm_gpiod_get_optional(dev: ov9282->dev, con_id: "reset",
1121 flags: GPIOD_OUT_LOW);
1122 if (IS_ERR(ptr: ov9282->reset_gpio)) {
1123 dev_err(ov9282->dev, "failed to get reset gpio %ld",
1124 PTR_ERR(ov9282->reset_gpio));
1125 return PTR_ERR(ptr: ov9282->reset_gpio);
1126 }
1127
1128 /* Get sensor input clock */
1129 ov9282->inclk = devm_clk_get(dev: ov9282->dev, NULL);
1130 if (IS_ERR(ptr: ov9282->inclk)) {
1131 dev_err(ov9282->dev, "could not get inclk");
1132 return PTR_ERR(ptr: ov9282->inclk);
1133 }
1134
1135 ret = ov9282_configure_regulators(ov9282);
1136 if (ret)
1137 return dev_err_probe(dev: ov9282->dev, err: ret,
1138 fmt: "Failed to get power regulators\n");
1139
1140 rate = clk_get_rate(clk: ov9282->inclk);
1141 if (rate != OV9282_INCLK_RATE) {
1142 dev_err(ov9282->dev, "inclk frequency mismatch");
1143 return -EINVAL;
1144 }
1145
1146 ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
1147 if (!ep)
1148 return -ENXIO;
1149
1150 ret = v4l2_fwnode_endpoint_alloc_parse(fwnode: ep, vep: &bus_cfg);
1151 fwnode_handle_put(fwnode: ep);
1152 if (ret)
1153 return ret;
1154
1155 ov9282->noncontinuous_clock =
1156 bus_cfg.bus.mipi_csi2.flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
1157
1158 if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV9282_NUM_DATA_LANES) {
1159 dev_err(ov9282->dev,
1160 "number of CSI2 data lanes %d is not supported",
1161 bus_cfg.bus.mipi_csi2.num_data_lanes);
1162 ret = -EINVAL;
1163 goto done_endpoint_free;
1164 }
1165
1166 if (!bus_cfg.nr_of_link_frequencies) {
1167 dev_err(ov9282->dev, "no link frequencies defined");
1168 ret = -EINVAL;
1169 goto done_endpoint_free;
1170 }
1171
1172 for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
1173 if (bus_cfg.link_frequencies[i] == OV9282_LINK_FREQ)
1174 goto done_endpoint_free;
1175
1176 ret = -EINVAL;
1177
1178done_endpoint_free:
1179 v4l2_fwnode_endpoint_free(vep: &bus_cfg);
1180
1181 return ret;
1182}
1183
1184/* V4l2 subdevice ops */
1185static const struct v4l2_subdev_core_ops ov9282_core_ops = {
1186 .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
1187 .unsubscribe_event = v4l2_event_subdev_unsubscribe,
1188};
1189
1190static const struct v4l2_subdev_video_ops ov9282_video_ops = {
1191 .s_stream = ov9282_set_stream,
1192};
1193
1194static const struct v4l2_subdev_pad_ops ov9282_pad_ops = {
1195 .enum_mbus_code = ov9282_enum_mbus_code,
1196 .enum_frame_size = ov9282_enum_frame_size,
1197 .get_fmt = ov9282_get_pad_format,
1198 .set_fmt = ov9282_set_pad_format,
1199 .get_selection = ov9282_get_selection,
1200};
1201
1202static const struct v4l2_subdev_ops ov9282_subdev_ops = {
1203 .core = &ov9282_core_ops,
1204 .video = &ov9282_video_ops,
1205 .pad = &ov9282_pad_ops,
1206};
1207
1208static const struct v4l2_subdev_internal_ops ov9282_internal_ops = {
1209 .init_state = ov9282_init_state,
1210};
1211
1212/**
1213 * ov9282_power_on() - Sensor power on sequence
1214 * @dev: pointer to i2c device
1215 *
1216 * Return: 0 if successful, error code otherwise.
1217 */
1218static int ov9282_power_on(struct device *dev)
1219{
1220 struct v4l2_subdev *sd = dev_get_drvdata(dev);
1221 struct ov9282 *ov9282 = to_ov9282(subdev: sd);
1222 int ret;
1223
1224 ret = regulator_bulk_enable(OV9282_NUM_SUPPLIES, consumers: ov9282->supplies);
1225 if (ret < 0) {
1226 dev_err(dev, "Failed to enable regulators\n");
1227 return ret;
1228 }
1229
1230 usleep_range(min: 400, max: 600);
1231
1232 gpiod_set_value_cansleep(desc: ov9282->reset_gpio, value: 1);
1233
1234 ret = clk_prepare_enable(clk: ov9282->inclk);
1235 if (ret) {
1236 dev_err(ov9282->dev, "fail to enable inclk");
1237 goto error_reset;
1238 }
1239
1240 usleep_range(min: 400, max: 600);
1241
1242 ret = ov9282_write_reg(ov9282, OV9282_REG_MIPI_CTRL00, len: 1,
1243 val: ov9282->noncontinuous_clock ?
1244 OV9282_GATED_CLOCK : 0);
1245 if (ret) {
1246 dev_err(ov9282->dev, "fail to write MIPI_CTRL00");
1247 goto error_clk;
1248 }
1249
1250 return 0;
1251
1252error_clk:
1253 clk_disable_unprepare(clk: ov9282->inclk);
1254error_reset:
1255 gpiod_set_value_cansleep(desc: ov9282->reset_gpio, value: 0);
1256
1257 regulator_bulk_disable(OV9282_NUM_SUPPLIES, consumers: ov9282->supplies);
1258
1259 return ret;
1260}
1261
1262/**
1263 * ov9282_power_off() - Sensor power off sequence
1264 * @dev: pointer to i2c device
1265 *
1266 * Return: 0 if successful, error code otherwise.
1267 */
1268static int ov9282_power_off(struct device *dev)
1269{
1270 struct v4l2_subdev *sd = dev_get_drvdata(dev);
1271 struct ov9282 *ov9282 = to_ov9282(subdev: sd);
1272
1273 gpiod_set_value_cansleep(desc: ov9282->reset_gpio, value: 0);
1274
1275 clk_disable_unprepare(clk: ov9282->inclk);
1276
1277 regulator_bulk_disable(OV9282_NUM_SUPPLIES, consumers: ov9282->supplies);
1278
1279 return 0;
1280}
1281
1282/**
1283 * ov9282_init_controls() - Initialize sensor subdevice controls
1284 * @ov9282: pointer to ov9282 device
1285 *
1286 * Return: 0 if successful, error code otherwise.
1287 */
1288static int ov9282_init_controls(struct ov9282 *ov9282)
1289{
1290 struct v4l2_ctrl_handler *ctrl_hdlr = &ov9282->ctrl_handler;
1291 const struct ov9282_mode *mode = ov9282->cur_mode;
1292 struct v4l2_fwnode_device_properties props;
1293 u32 hblank_min;
1294 u32 lpfr;
1295 int ret;
1296
1297 ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
1298 if (ret)
1299 return ret;
1300
1301 /* Serialize controls with sensor device */
1302 ctrl_hdlr->lock = &ov9282->mutex;
1303
1304 /* Initialize exposure and gain */
1305 lpfr = mode->vblank + mode->height;
1306 ov9282->exp_ctrl = v4l2_ctrl_new_std(hdl: ctrl_hdlr,
1307 ops: &ov9282_ctrl_ops,
1308 V4L2_CID_EXPOSURE,
1309 OV9282_EXPOSURE_MIN,
1310 max: lpfr - OV9282_EXPOSURE_OFFSET,
1311 OV9282_EXPOSURE_STEP,
1312 OV9282_EXPOSURE_DEFAULT);
1313
1314 ov9282->again_ctrl = v4l2_ctrl_new_std(hdl: ctrl_hdlr,
1315 ops: &ov9282_ctrl_ops,
1316 V4L2_CID_ANALOGUE_GAIN,
1317 OV9282_AGAIN_MIN,
1318 OV9282_AGAIN_MAX,
1319 OV9282_AGAIN_STEP,
1320 OV9282_AGAIN_DEFAULT);
1321
1322 v4l2_ctrl_cluster(ncontrols: 2, controls: &ov9282->exp_ctrl);
1323
1324 ov9282->vblank_ctrl = v4l2_ctrl_new_std(hdl: ctrl_hdlr,
1325 ops: &ov9282_ctrl_ops,
1326 V4L2_CID_VBLANK,
1327 min: mode->vblank_min,
1328 max: mode->vblank_max,
1329 step: 1, def: mode->vblank);
1330
1331 v4l2_ctrl_new_std(hdl: ctrl_hdlr, ops: &ov9282_ctrl_ops, V4L2_CID_VFLIP,
1332 min: 0, max: 1, step: 1, def: 1);
1333
1334 v4l2_ctrl_new_std(hdl: ctrl_hdlr, ops: &ov9282_ctrl_ops, V4L2_CID_HFLIP,
1335 min: 0, max: 1, step: 1, def: 1);
1336
1337 /* Read only controls */
1338 ov9282->pixel_rate = v4l2_ctrl_new_std(hdl: ctrl_hdlr, ops: &ov9282_ctrl_ops,
1339 V4L2_CID_PIXEL_RATE,
1340 OV9282_PIXEL_RATE_10BIT,
1341 OV9282_PIXEL_RATE_10BIT, step: 1,
1342 OV9282_PIXEL_RATE_10BIT);
1343
1344 ov9282->link_freq_ctrl = v4l2_ctrl_new_int_menu(hdl: ctrl_hdlr,
1345 ops: &ov9282_ctrl_ops,
1346 V4L2_CID_LINK_FREQ,
1347 ARRAY_SIZE(link_freq) -
1348 1,
1349 def: mode->link_freq_idx,
1350 qmenu_int: link_freq);
1351 if (ov9282->link_freq_ctrl)
1352 ov9282->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
1353
1354 hblank_min = mode->hblank_min[ov9282->noncontinuous_clock ? 0 : 1];
1355 ov9282->hblank_ctrl = v4l2_ctrl_new_std(hdl: ctrl_hdlr,
1356 ops: &ov9282_ctrl_ops,
1357 V4L2_CID_HBLANK,
1358 min: hblank_min,
1359 OV9282_TIMING_HTS_MAX - mode->width,
1360 step: 1, def: hblank_min);
1361
1362 ret = v4l2_fwnode_device_parse(dev: ov9282->dev, props: &props);
1363 if (!ret) {
1364 /* Failure sets ctrl_hdlr->error, which we check afterwards anyway */
1365 v4l2_ctrl_new_fwnode_properties(hdl: ctrl_hdlr, ctrl_ops: &ov9282_ctrl_ops,
1366 p: &props);
1367 }
1368
1369 if (ctrl_hdlr->error || ret) {
1370 dev_err(ov9282->dev, "control init failed: %d",
1371 ctrl_hdlr->error);
1372 v4l2_ctrl_handler_free(hdl: ctrl_hdlr);
1373 return ctrl_hdlr->error;
1374 }
1375
1376 ov9282->sd.ctrl_handler = ctrl_hdlr;
1377
1378 return 0;
1379}
1380
1381/**
1382 * ov9282_probe() - I2C client device binding
1383 * @client: pointer to i2c client device
1384 *
1385 * Return: 0 if successful, error code otherwise.
1386 */
1387static int ov9282_probe(struct i2c_client *client)
1388{
1389 struct ov9282 *ov9282;
1390 int ret;
1391
1392 ov9282 = devm_kzalloc(dev: &client->dev, size: sizeof(*ov9282), GFP_KERNEL);
1393 if (!ov9282)
1394 return -ENOMEM;
1395
1396 ov9282->dev = &client->dev;
1397
1398 /* Initialize subdev */
1399 v4l2_i2c_subdev_init(sd: &ov9282->sd, client, ops: &ov9282_subdev_ops);
1400 ov9282->sd.internal_ops = &ov9282_internal_ops;
1401 v4l2_i2c_subdev_set_name(sd: &ov9282->sd, client,
1402 devname: device_get_match_data(dev: ov9282->dev), NULL);
1403
1404 ret = ov9282_parse_hw_config(ov9282);
1405 if (ret) {
1406 dev_err(ov9282->dev, "HW configuration is not supported");
1407 return ret;
1408 }
1409
1410 mutex_init(&ov9282->mutex);
1411
1412 ret = ov9282_power_on(dev: ov9282->dev);
1413 if (ret) {
1414 dev_err(ov9282->dev, "failed to power-on the sensor");
1415 goto error_mutex_destroy;
1416 }
1417
1418 /* Check module identity */
1419 ret = ov9282_detect(ov9282);
1420 if (ret) {
1421 dev_err(ov9282->dev, "failed to find sensor: %d", ret);
1422 goto error_power_off;
1423 }
1424
1425 /* Set default mode to first mode */
1426 ov9282->cur_mode = &supported_modes[DEFAULT_MODE];
1427 ov9282->code = MEDIA_BUS_FMT_Y10_1X10;
1428 ov9282->vblank = ov9282->cur_mode->vblank;
1429
1430 ret = ov9282_init_controls(ov9282);
1431 if (ret) {
1432 dev_err(ov9282->dev, "failed to init controls: %d", ret);
1433 goto error_power_off;
1434 }
1435
1436 /* Initialize subdev */
1437 ov9282->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
1438 V4L2_SUBDEV_FL_HAS_EVENTS;
1439 ov9282->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
1440
1441 /* Initialize source pad */
1442 ov9282->pad.flags = MEDIA_PAD_FL_SOURCE;
1443 ret = media_entity_pads_init(entity: &ov9282->sd.entity, num_pads: 1, pads: &ov9282->pad);
1444 if (ret) {
1445 dev_err(ov9282->dev, "failed to init entity pads: %d", ret);
1446 goto error_handler_free;
1447 }
1448
1449 ret = v4l2_async_register_subdev_sensor(sd: &ov9282->sd);
1450 if (ret < 0) {
1451 dev_err(ov9282->dev,
1452 "failed to register async subdev: %d", ret);
1453 goto error_media_entity;
1454 }
1455
1456 pm_runtime_set_active(dev: ov9282->dev);
1457 pm_runtime_enable(dev: ov9282->dev);
1458 pm_runtime_idle(dev: ov9282->dev);
1459
1460 return 0;
1461
1462error_media_entity:
1463 media_entity_cleanup(entity: &ov9282->sd.entity);
1464error_handler_free:
1465 v4l2_ctrl_handler_free(hdl: ov9282->sd.ctrl_handler);
1466error_power_off:
1467 ov9282_power_off(dev: ov9282->dev);
1468error_mutex_destroy:
1469 mutex_destroy(lock: &ov9282->mutex);
1470
1471 return ret;
1472}
1473
1474/**
1475 * ov9282_remove() - I2C client device unbinding
1476 * @client: pointer to I2C client device
1477 *
1478 * Return: 0 if successful, error code otherwise.
1479 */
1480static void ov9282_remove(struct i2c_client *client)
1481{
1482 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1483 struct ov9282 *ov9282 = to_ov9282(subdev: sd);
1484
1485 v4l2_async_unregister_subdev(sd);
1486 media_entity_cleanup(entity: &sd->entity);
1487 v4l2_ctrl_handler_free(hdl: sd->ctrl_handler);
1488
1489 pm_runtime_disable(dev: &client->dev);
1490 if (!pm_runtime_status_suspended(dev: &client->dev))
1491 ov9282_power_off(dev: &client->dev);
1492 pm_runtime_set_suspended(dev: &client->dev);
1493
1494 mutex_destroy(lock: &ov9282->mutex);
1495}
1496
1497static const struct dev_pm_ops ov9282_pm_ops = {
1498 SET_RUNTIME_PM_OPS(ov9282_power_off, ov9282_power_on, NULL)
1499};
1500
1501static const struct of_device_id ov9282_of_match[] = {
1502 { .compatible = "ovti,ov9281", .data = "ov9281" },
1503 { .compatible = "ovti,ov9282", .data = "ov9282" },
1504 { }
1505};
1506
1507MODULE_DEVICE_TABLE(of, ov9282_of_match);
1508
1509static struct i2c_driver ov9282_driver = {
1510 .probe = ov9282_probe,
1511 .remove = ov9282_remove,
1512 .driver = {
1513 .name = "ov9282",
1514 .pm = &ov9282_pm_ops,
1515 .of_match_table = ov9282_of_match,
1516 },
1517};
1518
1519module_i2c_driver(ov9282_driver);
1520
1521MODULE_DESCRIPTION("OmniVision ov9282 sensor driver");
1522MODULE_LICENSE("GPL");
1523

source code of linux/drivers/media/i2c/ov9282.c