| 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * upd6408x - NEC Electronics 3-Dimensional Y/C separation driver |
| 4 | * |
| 5 | * 2003 by T.Adachi (tadachi@tadachi-net.com) |
| 6 | * 2003 by Takeru KOMORIYA <komoriya@paken.org> |
| 7 | * 2006 by Hans Verkuil <hverkuil@xs4all.nl> |
| 8 | */ |
| 9 | |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/i2c.h> |
| 13 | #include <linux/videodev2.h> |
| 14 | #include <linux/slab.h> |
| 15 | #include <media/v4l2-device.h> |
| 16 | #include <media/i2c/upd64083.h> |
| 17 | |
| 18 | MODULE_DESCRIPTION("uPD64083 driver" ); |
| 19 | MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil" ); |
| 20 | MODULE_LICENSE("GPL" ); |
| 21 | |
| 22 | static bool debug; |
| 23 | module_param(debug, bool, 0644); |
| 24 | |
| 25 | MODULE_PARM_DESC(debug, "Debug level (0-1)" ); |
| 26 | |
| 27 | |
| 28 | enum { |
| 29 | R00 = 0, R01, R02, R03, R04, |
| 30 | R05, R06, R07, R08, R09, |
| 31 | R0A, R0B, R0C, R0D, R0E, R0F, |
| 32 | R10, R11, R12, R13, R14, |
| 33 | R15, R16, |
| 34 | TOT_REGS |
| 35 | }; |
| 36 | |
| 37 | struct upd64083_state { |
| 38 | struct v4l2_subdev sd; |
| 39 | u8 mode; |
| 40 | u8 ext_y_adc; |
| 41 | u8 regs[TOT_REGS]; |
| 42 | }; |
| 43 | |
| 44 | static inline struct upd64083_state *to_state(struct v4l2_subdev *sd) |
| 45 | { |
| 46 | return container_of(sd, struct upd64083_state, sd); |
| 47 | } |
| 48 | |
| 49 | /* Initial values when used in combination with the |
| 50 | NEC upd64031a ghost reduction chip. */ |
| 51 | static u8 upd64083_init[] = { |
| 52 | 0x1f, 0x01, 0xa0, 0x2d, 0x29, /* we use EXCSS=0 */ |
| 53 | 0x36, 0xdd, 0x05, 0x56, 0x48, |
| 54 | 0x00, 0x3a, 0xa0, 0x05, 0x08, |
| 55 | 0x44, 0x60, 0x08, 0x52, 0xf8, |
| 56 | 0x53, 0x60, 0x10 |
| 57 | }; |
| 58 | |
| 59 | /* ------------------------------------------------------------------------ */ |
| 60 | |
| 61 | static void upd64083_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 62 | { |
| 63 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 64 | u8 buf[2]; |
| 65 | |
| 66 | buf[0] = reg; |
| 67 | buf[1] = val; |
| 68 | v4l2_dbg(1, debug, sd, "write reg: %02x val: %02x\n" , reg, val); |
| 69 | if (i2c_master_send(client, buf, count: 2) != 2) |
| 70 | v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n" , reg, val); |
| 71 | } |
| 72 | |
| 73 | /* ------------------------------------------------------------------------ */ |
| 74 | |
| 75 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
| 76 | static u8 upd64083_read(struct v4l2_subdev *sd, u8 reg) |
| 77 | { |
| 78 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 79 | u8 buf[7]; |
| 80 | |
| 81 | if (reg >= sizeof(buf)) |
| 82 | return 0xff; |
| 83 | i2c_master_recv(client, buf, count: sizeof(buf)); |
| 84 | return buf[reg]; |
| 85 | } |
| 86 | #endif |
| 87 | |
| 88 | /* ------------------------------------------------------------------------ */ |
| 89 | |
| 90 | static int upd64083_s_routing(struct v4l2_subdev *sd, |
| 91 | u32 input, u32 output, u32 config) |
| 92 | { |
| 93 | struct upd64083_state *state = to_state(sd); |
| 94 | u8 r00, r02; |
| 95 | |
| 96 | if (input > 7 || (input & 6) == 6) |
| 97 | return -EINVAL; |
| 98 | state->mode = (input & 3) << 6; |
| 99 | state->ext_y_adc = (input & UPD64083_EXT_Y_ADC) << 3; |
| 100 | r00 = (state->regs[R00] & ~(3 << 6)) | state->mode; |
| 101 | r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc; |
| 102 | upd64083_write(sd, reg: R00, val: r00); |
| 103 | upd64083_write(sd, reg: R02, val: r02); |
| 104 | return 0; |
| 105 | } |
| 106 | |
| 107 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
| 108 | static int upd64083_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) |
| 109 | { |
| 110 | reg->val = upd64083_read(sd, reg: reg->reg & 0xff); |
| 111 | reg->size = 1; |
| 112 | return 0; |
| 113 | } |
| 114 | |
| 115 | static int upd64083_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) |
| 116 | { |
| 117 | upd64083_write(sd, reg: reg->reg & 0xff, val: reg->val & 0xff); |
| 118 | return 0; |
| 119 | } |
| 120 | #endif |
| 121 | |
| 122 | static int upd64083_log_status(struct v4l2_subdev *sd) |
| 123 | { |
| 124 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 125 | u8 buf[7]; |
| 126 | |
| 127 | i2c_master_recv(client, buf, count: 7); |
| 128 | v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x " |
| 129 | "SA04=%02x SA05=%02x SA06=%02x\n" , |
| 130 | buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); |
| 131 | return 0; |
| 132 | } |
| 133 | |
| 134 | /* ----------------------------------------------------------------------- */ |
| 135 | |
| 136 | static const struct v4l2_subdev_core_ops upd64083_core_ops = { |
| 137 | .log_status = upd64083_log_status, |
| 138 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
| 139 | .g_register = upd64083_g_register, |
| 140 | .s_register = upd64083_s_register, |
| 141 | #endif |
| 142 | }; |
| 143 | |
| 144 | static const struct v4l2_subdev_video_ops upd64083_video_ops = { |
| 145 | .s_routing = upd64083_s_routing, |
| 146 | }; |
| 147 | |
| 148 | static const struct v4l2_subdev_ops upd64083_ops = { |
| 149 | .core = &upd64083_core_ops, |
| 150 | .video = &upd64083_video_ops, |
| 151 | }; |
| 152 | |
| 153 | /* ------------------------------------------------------------------------ */ |
| 154 | |
| 155 | /* i2c implementation */ |
| 156 | |
| 157 | static int upd64083_probe(struct i2c_client *client) |
| 158 | { |
| 159 | struct upd64083_state *state; |
| 160 | struct v4l2_subdev *sd; |
| 161 | int i; |
| 162 | |
| 163 | if (!i2c_check_functionality(adap: client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 164 | return -EIO; |
| 165 | |
| 166 | v4l_info(client, "chip found @ 0x%x (%s)\n" , |
| 167 | client->addr << 1, client->adapter->name); |
| 168 | |
| 169 | state = devm_kzalloc(dev: &client->dev, size: sizeof(*state), GFP_KERNEL); |
| 170 | if (state == NULL) |
| 171 | return -ENOMEM; |
| 172 | sd = &state->sd; |
| 173 | v4l2_i2c_subdev_init(sd, client, ops: &upd64083_ops); |
| 174 | /* Initially assume that a ghost reduction chip is present */ |
| 175 | state->mode = 0; /* YCS mode */ |
| 176 | state->ext_y_adc = (1 << 5); |
| 177 | memcpy(state->regs, upd64083_init, TOT_REGS); |
| 178 | for (i = 0; i < TOT_REGS; i++) |
| 179 | upd64083_write(sd, reg: i, val: state->regs[i]); |
| 180 | return 0; |
| 181 | } |
| 182 | |
| 183 | static void upd64083_remove(struct i2c_client *client) |
| 184 | { |
| 185 | struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| 186 | |
| 187 | v4l2_device_unregister_subdev(sd); |
| 188 | } |
| 189 | |
| 190 | /* ----------------------------------------------------------------------- */ |
| 191 | |
| 192 | static const struct i2c_device_id upd64083_id[] = { |
| 193 | { "upd64083" }, |
| 194 | { } |
| 195 | }; |
| 196 | MODULE_DEVICE_TABLE(i2c, upd64083_id); |
| 197 | |
| 198 | static struct i2c_driver upd64083_driver = { |
| 199 | .driver = { |
| 200 | .name = "upd64083" , |
| 201 | }, |
| 202 | .probe = upd64083_probe, |
| 203 | .remove = upd64083_remove, |
| 204 | .id_table = upd64083_id, |
| 205 | }; |
| 206 | |
| 207 | module_i2c_driver(upd64083_driver); |
| 208 | |