1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
2 | /* |
3 | * Driver for the Auvitek USB bridge |
4 | * |
5 | * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org> |
6 | */ |
7 | |
8 | /* We'll start to rename these registers once we have a better |
9 | * understanding of their meaning. |
10 | */ |
11 | #define REG_000 0x000 |
12 | #define REG_001 0x001 |
13 | #define REG_002 0x002 |
14 | #define REG_003 0x003 |
15 | |
16 | #define AU0828_SENSORCTRL_100 0x100 |
17 | #define AU0828_SENSORCTRL_VBI_103 0x103 |
18 | |
19 | /* I2C registers */ |
20 | #define AU0828_I2C_TRIGGER_200 0x200 |
21 | #define AU0828_I2C_STATUS_201 0x201 |
22 | #define AU0828_I2C_CLK_DIVIDER_202 0x202 |
23 | #define AU0828_I2C_DEST_ADDR_203 0x203 |
24 | #define AU0828_I2C_WRITE_FIFO_205 0x205 |
25 | #define AU0828_I2C_READ_FIFO_209 0x209 |
26 | #define AU0828_I2C_MULTIBYTE_MODE_2FF 0x2ff |
27 | |
28 | /* Audio registers */ |
29 | #define AU0828_AUDIOCTRL_50C 0x50C |
30 | |
31 | #define REG_600 0x600 |
32 | |
33 | /*********************************************************************/ |
34 | /* Here are constants for values associated with the above registers */ |
35 | |
36 | /* I2C Trigger (Reg 0x200) */ |
37 | #define AU0828_I2C_TRIGGER_WRITE 0x01 |
38 | #define AU0828_I2C_TRIGGER_READ 0x20 |
39 | #define AU0828_I2C_TRIGGER_HOLD 0x40 |
40 | |
41 | /* I2C Status (Reg 0x201) */ |
42 | #define AU0828_I2C_STATUS_READ_DONE 0x01 |
43 | #define AU0828_I2C_STATUS_NO_READ_ACK 0x02 |
44 | #define AU0828_I2C_STATUS_WRITE_DONE 0x04 |
45 | #define AU0828_I2C_STATUS_NO_WRITE_ACK 0x08 |
46 | #define AU0828_I2C_STATUS_BUSY 0x10 |
47 | |
48 | /* I2C Clock Divider (Reg 0x202) */ |
49 | #define AU0828_I2C_CLK_250KHZ 0x07 |
50 | #define AU0828_I2C_CLK_100KHZ 0x14 |
51 | #define AU0828_I2C_CLK_30KHZ 0x40 |
52 | #define AU0828_I2C_CLK_20KHZ 0x60 |
53 | |