1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
4 *
5 * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
6 *
7 * Based on the dvb-usb-framework code and the
8 * original Terratec Cinergy T2 driver by:
9 *
10 * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
11 * Holger Waechtler <holger@qanu.de>
12 *
13 * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
14 */
15
16#include "cinergyT2.h"
17
18
19/* debug */
20int dvb_usb_cinergyt2_debug;
21
22module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644);
23MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 (or-able)).");
24
25DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
26
27struct cinergyt2_state {
28 u8 rc_counter;
29 unsigned char data[64];
30};
31
32/* Forward declaration */
33static const struct dvb_usb_device_properties cinergyt2_properties;
34
35static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
36{
37 struct dvb_usb_device *d = adap->dev;
38 struct cinergyt2_state *st = d->priv;
39 int ret;
40
41 mutex_lock(&d->data_mutex);
42 st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER;
43 st->data[1] = enable ? 1 : 0;
44
45 ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0);
46 mutex_unlock(lock: &d->data_mutex);
47
48 return ret;
49}
50
51static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
52{
53 struct cinergyt2_state *st = d->priv;
54 int ret;
55
56 mutex_lock(&d->data_mutex);
57 st->data[0] = CINERGYT2_EP1_SLEEP_MODE;
58 st->data[1] = enable ? 0 : 1;
59
60 ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0);
61 mutex_unlock(lock: &d->data_mutex);
62
63 return ret;
64}
65
66static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
67{
68 struct dvb_usb_device *d = adap->dev;
69 struct cinergyt2_state *st = d->priv;
70 int ret;
71
72 adap->fe_adap[0].fe = cinergyt2_fe_attach(d: adap->dev);
73
74 mutex_lock(&d->data_mutex);
75 st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION;
76
77 ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
78 if (ret < 0) {
79 if (adap->fe_adap[0].fe)
80 adap->fe_adap[0].fe->ops.release(adap->fe_adap[0].fe);
81 deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep state info\n");
82 }
83 mutex_unlock(lock: &d->data_mutex);
84
85 return ret;
86}
87
88static struct rc_map_table rc_map_cinergyt2_table[] = {
89 { 0x0401, KEY_POWER },
90 { 0x0402, KEY_1 },
91 { 0x0403, KEY_2 },
92 { 0x0404, KEY_3 },
93 { 0x0405, KEY_4 },
94 { 0x0406, KEY_5 },
95 { 0x0407, KEY_6 },
96 { 0x0408, KEY_7 },
97 { 0x0409, KEY_8 },
98 { 0x040a, KEY_9 },
99 { 0x040c, KEY_0 },
100 { 0x040b, KEY_VIDEO },
101 { 0x040d, KEY_REFRESH },
102 { 0x040e, KEY_SELECT },
103 { 0x040f, KEY_EPG },
104 { 0x0410, KEY_UP },
105 { 0x0414, KEY_DOWN },
106 { 0x0411, KEY_LEFT },
107 { 0x0413, KEY_RIGHT },
108 { 0x0412, KEY_OK },
109 { 0x0415, KEY_TEXT },
110 { 0x0416, KEY_INFO },
111 { 0x0417, KEY_RED },
112 { 0x0418, KEY_GREEN },
113 { 0x0419, KEY_YELLOW },
114 { 0x041a, KEY_BLUE },
115 { 0x041c, KEY_VOLUMEUP },
116 { 0x041e, KEY_VOLUMEDOWN },
117 { 0x041d, KEY_MUTE },
118 { 0x041b, KEY_CHANNELUP },
119 { 0x041f, KEY_CHANNELDOWN },
120 { 0x0440, KEY_PAUSE },
121 { 0x044c, KEY_PLAY },
122 { 0x0458, KEY_RECORD },
123 { 0x0454, KEY_PREVIOUS },
124 { 0x0448, KEY_STOP },
125 { 0x045c, KEY_NEXT }
126};
127
128/* Number of keypresses to ignore before detect repeating */
129#define RC_REPEAT_DELAY 3
130
131static int repeatable_keys[] = {
132 KEY_UP,
133 KEY_DOWN,
134 KEY_LEFT,
135 KEY_RIGHT,
136 KEY_VOLUMEUP,
137 KEY_VOLUMEDOWN,
138 KEY_CHANNELUP,
139 KEY_CHANNELDOWN
140};
141
142static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
143{
144 struct cinergyt2_state *st = d->priv;
145 int i, ret;
146
147 *state = REMOTE_NO_KEY_PRESSED;
148
149 mutex_lock(&d->data_mutex);
150 st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS;
151
152 ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
153 if (ret < 0)
154 goto ret;
155
156 if (st->data[4] == 0xff) {
157 /* key repeat */
158 st->rc_counter++;
159 if (st->rc_counter > RC_REPEAT_DELAY) {
160 for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) {
161 if (d->last_event == repeatable_keys[i]) {
162 *state = REMOTE_KEY_REPEAT;
163 *event = d->last_event;
164 deb_rc("repeat key, event %x\n",
165 *event);
166 goto ret;
167 }
168 }
169 deb_rc("repeated key (non repeatable)\n");
170 }
171 goto ret;
172 }
173
174 /* hack to pass checksum on the custom field */
175 st->data[2] = ~st->data[1];
176 dvb_usb_nec_rc_key_to_event(d, keybuf: st->data, event, state);
177 if (st->data[0] != 0) {
178 if (*event != d->last_event)
179 st->rc_counter = 0;
180
181 deb_rc("key: %*ph\n", 5, st->data);
182 }
183
184ret:
185 mutex_unlock(lock: &d->data_mutex);
186 return ret;
187}
188
189static int cinergyt2_usb_probe(struct usb_interface *intf,
190 const struct usb_device_id *id)
191{
192 return dvb_usb_device_init(intf, &cinergyt2_properties,
193 THIS_MODULE, NULL, adapter_nums: adapter_nr);
194}
195
196enum {
197 TERRATEC_CINERGY_T2,
198};
199
200static struct usb_device_id cinergyt2_usb_table[] = {
201 DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_T2),
202 { }
203};
204
205MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table);
206
207static const struct dvb_usb_device_properties cinergyt2_properties = {
208 .size_of_priv = sizeof(struct cinergyt2_state),
209 .num_adapters = 1,
210 .adapter = {
211 {
212 .num_frontends = 1,
213 .fe = {{
214 .streaming_ctrl = cinergyt2_streaming_ctrl,
215 .frontend_attach = cinergyt2_frontend_attach,
216
217 /* parameter for the MPEG2-data transfer */
218 .stream = {
219 .type = USB_BULK,
220 .count = 5,
221 .endpoint = 0x02,
222 .u = {
223 .bulk = {
224 .buffersize = 512,
225 }
226 }
227 },
228 }},
229 }
230 },
231
232 .power_ctrl = cinergyt2_power_ctrl,
233
234 .rc.legacy = {
235 .rc_interval = 50,
236 .rc_map_table = rc_map_cinergyt2_table,
237 .rc_map_size = ARRAY_SIZE(rc_map_cinergyt2_table),
238 .rc_query = cinergyt2_rc_query,
239 },
240
241 .generic_bulk_ctrl_endpoint = 1,
242
243 .num_device_descs = 1,
244 .devices = {
245 { .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver",
246 .cold_ids = {NULL},
247 .warm_ids = { &cinergyt2_usb_table[TERRATEC_CINERGY_T2], NULL },
248 },
249 { NULL },
250 }
251};
252
253
254static struct usb_driver cinergyt2_driver = {
255 .name = "cinergyT2",
256 .probe = cinergyt2_usb_probe,
257 .disconnect = dvb_usb_device_exit,
258 .id_table = cinergyt2_usb_table
259};
260
261module_usb_driver(cinergyt2_driver);
262
263MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver");
264MODULE_LICENSE("GPL");
265MODULE_AUTHOR("Tomi Orava");
266

source code of linux/drivers/media/usb/dvb-usb/cinergyT2-core.c