1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
2 | /* |
3 | * STK1135 registers |
4 | * |
5 | * Copyright (c) 2013 Ondrej Zary |
6 | */ |
7 | |
8 | #define STK1135_REG_GCTRL 0x000 /* GPIO control */ |
9 | #define STK1135_REG_ICTRL 0x004 /* Interrupt control */ |
10 | #define STK1135_REG_IDATA 0x008 /* Interrupt data */ |
11 | #define STK1135_REG_RMCTL 0x00c /* Remote wakeup control */ |
12 | #define STK1135_REG_POSVA 0x010 /* Power-on strapping data */ |
13 | |
14 | #define STK1135_REG_SENSO 0x018 /* Sensor select options */ |
15 | #define STK1135_REG_PLLFD 0x01c /* PLL frequency divider */ |
16 | |
17 | #define STK1135_REG_SCTRL 0x100 /* Sensor control register */ |
18 | #define STK1135_REG_DCTRL 0x104 /* Decimation control register */ |
19 | #define STK1135_REG_CISPO 0x110 /* Capture image starting position */ |
20 | #define STK1135_REG_CIEPO 0x114 /* Capture image ending position */ |
21 | #define STK1135_REG_TCTRL 0x120 /* Test data control */ |
22 | |
23 | #define STK1135_REG_SICTL 0x200 /* Serial interface control register */ |
24 | #define STK1135_REG_SBUSW 0x204 /* Serial bus write */ |
25 | #define STK1135_REG_SBUSR 0x208 /* Serial bus read */ |
26 | #define STK1135_REG_SCSI 0x20c /* Software control serial interface */ |
27 | #define STK1135_REG_GSBWP 0x210 /* General serial bus write port */ |
28 | #define STK1135_REG_GSBRP 0x214 /* General serial bus read port */ |
29 | #define STK1135_REG_ASIC 0x2fc /* Alternate serial interface control */ |
30 | |
31 | #define STK1135_REG_TMGEN 0x300 /* Timing generator */ |
32 | #define STK1135_REG_TCP1 0x350 /* Timing control parameter 1 */ |
33 | |
34 | struct { |
35 | u8 ; |
36 | u8 ; |
37 | __le16 ; |
38 | } __packed; |
39 | |
40 | #define STK1135_HDR_FRAME_START (1 << 7) |
41 | #define STK1135_HDR_ODD (1 << 6) |
42 | #define STK1135_HDR_I2C_VBLANK (1 << 5) |
43 | |
44 | #define STK1135_HDR_SEQ_MASK 0x3f |
45 | |