1/*
2 * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
3 * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies.
4 * All rights reserved.
5 *
6 * This software is available to you under a choice of one of two
7 * licenses. You may choose to be licensed under the terms of the GNU
8 * General Public License (GPL) Version 2, available from the file
9 * COPYING in the main directory of this source tree, or the
10 * OpenIB.org BSD license below:
11 *
12 * Redistribution and use in source and binary forms, with or
13 * without modification, are permitted provided that the following
14 * conditions are met:
15 *
16 * - Redistributions of source code must retain the above
17 * copyright notice, this list of conditions and the following
18 * disclaimer.
19 *
20 * - Redistributions in binary form must reproduce the above
21 * copyright notice, this list of conditions and the following
22 * disclaimer in the documentation and/or other materials
23 * provided with the distribution.
24 *
25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
32 * SOFTWARE.
33 */
34
35#ifndef MLX4_FW_QOS_H
36#define MLX4_FW_QOS_H
37
38#include <linux/mlx4/cmd.h>
39#include <linux/mlx4/device.h>
40
41#define MLX4_NUM_UP 8
42#define MLX4_NUM_TC 8
43
44/* Default supported priorities for VPP allocation */
45#define MLX4_DEFAULT_QOS_PRIO (0)
46
47/* Derived from FW feature definition, 0 is the default vport fo all QPs */
48#define MLX4_VPP_DEFAULT_VPORT (0)
49
50struct mlx4_vport_qos_param {
51 u32 bw_share;
52 u32 max_avg_bw;
53 u8 enable;
54};
55
56/**
57 * mlx4_SET_PORT_PRIO2TC - This routine maps user priorities to traffic
58 * classes of a given port and device.
59 *
60 * @dev: mlx4_dev.
61 * @port: Physical port number.
62 * @prio2tc: Array of TC associated with each priorities.
63 *
64 * Returns 0 on success or a negative mlx4_core errno code.
65 **/
66int mlx4_SET_PORT_PRIO2TC(struct mlx4_dev *dev, u8 port, u8 *prio2tc);
67
68/**
69 * mlx4_SET_PORT_SCHEDULER - This routine configures the arbitration between
70 * traffic classes (ETS) and configured rate limit for traffic classes.
71 * tc_tx_bw, pg and ratelimit are arrays where each index represents a TC.
72 * The description for those parameters below refers to a single TC.
73 *
74 * @dev: mlx4_dev.
75 * @port: Physical port number.
76 * @tc_tx_bw: The percentage of the bandwidth allocated for traffic class
77 * within a TC group. The sum of the bw_percentage of all the traffic
78 * classes within a TC group must equal 100% for correct operation.
79 * @pg: The TC group the traffic class is associated with.
80 * @ratelimit: The maximal bandwidth allowed for the use by this traffic class.
81 *
82 * Returns 0 on success or a negative mlx4_core errno code.
83 **/
84int mlx4_SET_PORT_SCHEDULER(struct mlx4_dev *dev, u8 port, u8 *tc_tx_bw,
85 u8 *pg, u16 *ratelimit);
86/**
87 * mlx4_ALLOCATE_VPP_get - Query port VPP available resources and allocation.
88 * Before distribution of VPPs to priorities, only available_vpp is returned.
89 * After initialization it returns the distribution of VPPs among priorities.
90 *
91 * @dev: mlx4_dev.
92 * @port: Physical port number.
93 * @available_vpp: Pointer to variable where number of available VPPs is stored
94 * @vpp_p_up: Distribution of VPPs to priorities is stored in this array
95 *
96 * Returns 0 on success or a negative mlx4_core errno code.
97 **/
98int mlx4_ALLOCATE_VPP_get(struct mlx4_dev *dev, u8 port,
99 u16 *available_vpp, u8 *vpp_p_up);
100/**
101 * mlx4_ALLOCATE_VPP_set - Distribution of VPPs among differnt priorities.
102 * The total number of VPPs assigned to all for a port must not exceed
103 * the value reported by available_vpp in mlx4_ALLOCATE_VPP_get.
104 * VPP allocation is allowed only after the port type has been set,
105 * and while no QPs are open for this port.
106 *
107 * @dev: mlx4_dev.
108 * @port: Physical port number.
109 * @vpp_p_up: Allocation of VPPs to different priorities.
110 *
111 * Returns 0 on success or a negative mlx4_core errno code.
112 **/
113int mlx4_ALLOCATE_VPP_set(struct mlx4_dev *dev, u8 port, u8 *vpp_p_up);
114
115/**
116 * mlx4_SET_VPORT_QOS_get - Query QoS proporties of a Vport.
117 * Each priority allowed for the Vport is assigned with a share of the BW,
118 * and a BW limitation. This commands query the current QoS values.
119 *
120 * @dev: mlx4_dev.
121 * @port: Physical port number.
122 * @vport: Vport id.
123 * @out_param: Array of mlx4_vport_qos_param that will contain the values.
124 *
125 * Returns 0 on success or a negative mlx4_core errno code.
126 **/
127int mlx4_SET_VPORT_QOS_get(struct mlx4_dev *dev, u8 port, u8 vport,
128 struct mlx4_vport_qos_param *out_param);
129
130/**
131 * mlx4_SET_VPORT_QOS_set - Set QoS proporties of a Vport.
132 * QoS parameters can be modified at any time, but must be initialized
133 * before any QP is associated with the VPort.
134 *
135 * @dev: mlx4_dev.
136 * @port: Physical port number.
137 * @vport: Vport id.
138 * @in_param: Array of mlx4_vport_qos_param which holds the requested values.
139 *
140 * Returns 0 on success or a negative mlx4_core errno code.
141 **/
142int mlx4_SET_VPORT_QOS_set(struct mlx4_dev *dev, u8 port, u8 vport,
143 struct mlx4_vport_qos_param *in_param);
144
145#endif /* MLX4_FW_QOS_H */
146

source code of linux/drivers/net/ethernet/mellanox/mlx4/fw_qos.h