1 | // SPDX-License-Identifier: GPL-2.0-or-later |
2 | /* |
3 | * Copyright (c) 2023 Analog Devices, Inc. |
4 | * ADI regulator driver for MAX77503. |
5 | */ |
6 | |
7 | #include <linux/i2c.h> |
8 | #include <linux/module.h> |
9 | #include <linux/regmap.h> |
10 | #include <linux/regulator/driver.h> |
11 | #include <linux/regulator/machine.h> |
12 | #include <linux/regulator/of_regulator.h> |
13 | #include <linux/util_macros.h> |
14 | |
15 | #define MAX77503_REG_CFG 0x00 |
16 | #define MAX77503_REG_VOUT 0x01 |
17 | |
18 | #define MAX77503_BIT_EN BIT(0) |
19 | #define MAX77503_BIT_CURR_LIM BIT(3) |
20 | #define MAX77503_BIT_ADEN BIT(6) |
21 | |
22 | #define MAX77503_BITS_SOFT_START GENMASK(5, 4) |
23 | #define MAX77503_BITS_MX_VOUT GENMASK(7, 0) |
24 | |
25 | #define MAX77503_AD_ENABLED 0x1 |
26 | #define MAX77503_AD_DISABLED 0x0 |
27 | |
28 | static const struct regmap_config max77503_regmap_config = { |
29 | .reg_bits = 8, |
30 | .val_bits = 8, |
31 | .max_register = 0x2, |
32 | }; |
33 | |
34 | static const struct regulator_ops max77503_buck_ops = { |
35 | .list_voltage = regulator_list_voltage_linear_range, |
36 | .map_voltage = regulator_map_voltage_ascend, |
37 | .is_enabled = regulator_is_enabled_regmap, |
38 | .enable = regulator_enable_regmap, |
39 | .disable = regulator_disable_regmap, |
40 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
41 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
42 | .get_current_limit = regulator_get_current_limit_regmap, |
43 | .set_current_limit = regulator_set_current_limit_regmap, |
44 | .set_active_discharge = regulator_set_active_discharge_regmap, |
45 | .set_soft_start = regulator_set_soft_start_regmap, |
46 | }; |
47 | |
48 | static const struct linear_range max77503_buck_ranges[] = { |
49 | REGULATOR_LINEAR_RANGE(800000, 0x00, 0x54, 50000) |
50 | }; |
51 | |
52 | static const unsigned int max77503_current_limit_table[] = { |
53 | 500000, 2000000 |
54 | }; |
55 | |
56 | static const struct regulator_desc max77503_regulators_desc = { |
57 | .name = "max77503" , |
58 | .enable_reg = MAX77503_REG_CFG, |
59 | .enable_mask = MAX77503_BIT_EN, |
60 | .ops = &max77503_buck_ops, |
61 | .type = REGULATOR_VOLTAGE, |
62 | .linear_ranges = max77503_buck_ranges, |
63 | .n_linear_ranges = ARRAY_SIZE(max77503_buck_ranges), |
64 | .vsel_reg = MAX77503_REG_VOUT, |
65 | .vsel_mask = MAX77503_BITS_MX_VOUT, |
66 | .soft_start_reg = MAX77503_REG_CFG, |
67 | .soft_start_mask = MAX77503_BITS_SOFT_START, |
68 | .active_discharge_reg = MAX77503_REG_CFG, |
69 | .active_discharge_mask = MAX77503_BIT_ADEN, |
70 | .active_discharge_off = MAX77503_AD_DISABLED, |
71 | .active_discharge_on = MAX77503_AD_ENABLED, |
72 | .csel_reg = MAX77503_REG_CFG, |
73 | .csel_mask = MAX77503_BIT_CURR_LIM, |
74 | .curr_table = max77503_current_limit_table, |
75 | .n_current_limits = ARRAY_SIZE(max77503_current_limit_table), |
76 | .owner = THIS_MODULE, |
77 | }; |
78 | |
79 | static int max77503_regulator_probe(struct i2c_client *client) |
80 | { |
81 | struct device *dev = &client->dev; |
82 | struct regulator_config config = {}; |
83 | struct regulator_dev *rdev; |
84 | |
85 | config.dev = dev; |
86 | config.of_node = dev->of_node; |
87 | config.regmap = devm_regmap_init_i2c(client, &max77503_regmap_config); |
88 | if (IS_ERR(ptr: config.regmap)) { |
89 | dev_err(dev, "Failed to init regmap" ); |
90 | return PTR_ERR(ptr: config.regmap); |
91 | } |
92 | |
93 | rdev = devm_regulator_register(dev, regulator_desc: &max77503_regulators_desc, config: &config); |
94 | if (IS_ERR(ptr: rdev)) { |
95 | dev_err(dev, "Failed to register regulator MAX77503" ); |
96 | return PTR_ERR(ptr: rdev); |
97 | } |
98 | |
99 | return 0; |
100 | } |
101 | |
102 | static const struct of_device_id of_max77503_match_tbl[] = { |
103 | { .compatible = "adi,max77503" , }, |
104 | { } |
105 | }; |
106 | |
107 | MODULE_DEVICE_TABLE(of, of_max77503_match_tbl); |
108 | |
109 | static const struct i2c_device_id max77503_regulator_id[] = { |
110 | {"max77503" }, |
111 | { } |
112 | }; |
113 | |
114 | MODULE_DEVICE_TABLE(i2c, max77503_regulator_id); |
115 | |
116 | static struct i2c_driver max77503_regulator_driver = { |
117 | .driver = { |
118 | .name = "max77503" , |
119 | .of_match_table = of_max77503_match_tbl |
120 | }, |
121 | .probe = max77503_regulator_probe, |
122 | .id_table = max77503_regulator_id, |
123 | }; |
124 | |
125 | module_i2c_driver(max77503_regulator_driver); |
126 | |
127 | MODULE_AUTHOR("Gokhan Celik <Gokhan.Celik@analog.com>" ); |
128 | MODULE_DESCRIPTION("MAX77503 regulator driver" ); |
129 | MODULE_LICENSE("GPL" ); |
130 | |