1 | // SPDX-License-Identifier: GPL-2.0+ |
2 | // |
3 | // pv88090-regulator.c - Regulator device driver for PV88090 |
4 | // Copyright (C) 2015 Powerventure Semiconductor Ltd. |
5 | |
6 | #include <linux/err.h> |
7 | #include <linux/i2c.h> |
8 | #include <linux/module.h> |
9 | #include <linux/init.h> |
10 | #include <linux/slab.h> |
11 | #include <linux/regulator/driver.h> |
12 | #include <linux/regulator/machine.h> |
13 | #include <linux/regmap.h> |
14 | #include <linux/irq.h> |
15 | #include <linux/interrupt.h> |
16 | #include <linux/regulator/of_regulator.h> |
17 | #include "pv88090-regulator.h" |
18 | |
19 | #define PV88090_MAX_REGULATORS 5 |
20 | |
21 | /* PV88090 REGULATOR IDs */ |
22 | enum { |
23 | /* BUCKs */ |
24 | PV88090_ID_BUCK1, |
25 | PV88090_ID_BUCK2, |
26 | PV88090_ID_BUCK3, |
27 | |
28 | /* LDOs */ |
29 | PV88090_ID_LDO1, |
30 | PV88090_ID_LDO2, |
31 | }; |
32 | |
33 | struct pv88090_regulator { |
34 | struct regulator_desc desc; |
35 | unsigned int conf; |
36 | unsigned int conf2; |
37 | }; |
38 | |
39 | struct pv88090 { |
40 | struct device *dev; |
41 | struct regmap *regmap; |
42 | struct regulator_dev *rdev[PV88090_MAX_REGULATORS]; |
43 | }; |
44 | |
45 | struct pv88090_buck_voltage { |
46 | int min_uV; |
47 | int max_uV; |
48 | int uV_step; |
49 | }; |
50 | |
51 | static const struct regmap_config pv88090_regmap_config = { |
52 | .reg_bits = 8, |
53 | .val_bits = 8, |
54 | }; |
55 | |
56 | /* Current limits array (in uA) for BUCK1, BUCK2, BUCK3. |
57 | * Entry indexes corresponds to register values. |
58 | */ |
59 | |
60 | static const unsigned int pv88090_buck1_limits[] = { |
61 | 220000, 440000, 660000, 880000, 1100000, 1320000, 1540000, 1760000, |
62 | 1980000, 2200000, 2420000, 2640000, 2860000, 3080000, 3300000, 3520000, |
63 | 3740000, 3960000, 4180000, 4400000, 4620000, 4840000, 5060000, 5280000, |
64 | 5500000, 5720000, 5940000, 6160000, 6380000, 6600000, 6820000, 7040000 |
65 | }; |
66 | |
67 | static const unsigned int pv88090_buck23_limits[] = { |
68 | 1496000, 2393000, 3291000, 4189000 |
69 | }; |
70 | |
71 | static const struct pv88090_buck_voltage pv88090_buck_vol[3] = { |
72 | { |
73 | .min_uV = 600000, |
74 | .max_uV = 1393750, |
75 | .uV_step = 6250, |
76 | }, |
77 | |
78 | { |
79 | .min_uV = 1400000, |
80 | .max_uV = 2193750, |
81 | .uV_step = 6250, |
82 | }, |
83 | { |
84 | .min_uV = 1250000, |
85 | .max_uV = 2837500, |
86 | .uV_step = 12500, |
87 | }, |
88 | }; |
89 | |
90 | static unsigned int pv88090_buck_get_mode(struct regulator_dev *rdev) |
91 | { |
92 | struct pv88090_regulator *info = rdev_get_drvdata(rdev); |
93 | unsigned int data; |
94 | int ret, mode = 0; |
95 | |
96 | ret = regmap_read(map: rdev->regmap, reg: info->conf, val: &data); |
97 | if (ret < 0) |
98 | return ret; |
99 | |
100 | switch (data & PV88090_BUCK1_MODE_MASK) { |
101 | case PV88090_BUCK_MODE_SYNC: |
102 | mode = REGULATOR_MODE_FAST; |
103 | break; |
104 | case PV88090_BUCK_MODE_AUTO: |
105 | mode = REGULATOR_MODE_NORMAL; |
106 | break; |
107 | case PV88090_BUCK_MODE_SLEEP: |
108 | mode = REGULATOR_MODE_STANDBY; |
109 | break; |
110 | } |
111 | |
112 | return mode; |
113 | } |
114 | |
115 | static int pv88090_buck_set_mode(struct regulator_dev *rdev, |
116 | unsigned int mode) |
117 | { |
118 | struct pv88090_regulator *info = rdev_get_drvdata(rdev); |
119 | int val = 0; |
120 | |
121 | switch (mode) { |
122 | case REGULATOR_MODE_FAST: |
123 | val = PV88090_BUCK_MODE_SYNC; |
124 | break; |
125 | case REGULATOR_MODE_NORMAL: |
126 | val = PV88090_BUCK_MODE_AUTO; |
127 | break; |
128 | case REGULATOR_MODE_STANDBY: |
129 | val = PV88090_BUCK_MODE_SLEEP; |
130 | break; |
131 | default: |
132 | return -EINVAL; |
133 | } |
134 | |
135 | return regmap_update_bits(map: rdev->regmap, reg: info->conf, |
136 | PV88090_BUCK1_MODE_MASK, val); |
137 | } |
138 | |
139 | static const struct regulator_ops pv88090_buck_ops = { |
140 | .get_mode = pv88090_buck_get_mode, |
141 | .set_mode = pv88090_buck_set_mode, |
142 | .enable = regulator_enable_regmap, |
143 | .disable = regulator_disable_regmap, |
144 | .is_enabled = regulator_is_enabled_regmap, |
145 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
146 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
147 | .list_voltage = regulator_list_voltage_linear, |
148 | .set_current_limit = regulator_set_current_limit_regmap, |
149 | .get_current_limit = regulator_get_current_limit_regmap, |
150 | }; |
151 | |
152 | static const struct regulator_ops pv88090_ldo_ops = { |
153 | .enable = regulator_enable_regmap, |
154 | .disable = regulator_disable_regmap, |
155 | .is_enabled = regulator_is_enabled_regmap, |
156 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
157 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
158 | .list_voltage = regulator_list_voltage_linear, |
159 | }; |
160 | |
161 | #define PV88090_BUCK(chip, regl_name, min, step, max, limits_array) \ |
162 | {\ |
163 | .desc = {\ |
164 | .id = chip##_ID_##regl_name,\ |
165 | .name = __stringify(chip##_##regl_name),\ |
166 | .of_match = of_match_ptr(#regl_name),\ |
167 | .regulators_node = of_match_ptr("regulators"),\ |
168 | .type = REGULATOR_VOLTAGE,\ |
169 | .owner = THIS_MODULE,\ |
170 | .ops = &pv88090_buck_ops,\ |
171 | .min_uV = min, \ |
172 | .uV_step = step, \ |
173 | .n_voltages = ((max) - (min))/(step) + 1, \ |
174 | .enable_reg = PV88090_REG_##regl_name##_CONF0, \ |
175 | .enable_mask = PV88090_##regl_name##_EN, \ |
176 | .vsel_reg = PV88090_REG_##regl_name##_CONF0, \ |
177 | .vsel_mask = PV88090_V##regl_name##_MASK, \ |
178 | .curr_table = limits_array, \ |
179 | .n_current_limits = ARRAY_SIZE(limits_array), \ |
180 | .csel_reg = PV88090_REG_##regl_name##_CONF1, \ |
181 | .csel_mask = PV88090_##regl_name##_ILIM_MASK, \ |
182 | },\ |
183 | .conf = PV88090_REG_##regl_name##_CONF1, \ |
184 | .conf2 = PV88090_REG_##regl_name##_CONF2, \ |
185 | } |
186 | |
187 | #define PV88090_LDO(chip, regl_name, min, step, max) \ |
188 | {\ |
189 | .desc = {\ |
190 | .id = chip##_ID_##regl_name,\ |
191 | .name = __stringify(chip##_##regl_name),\ |
192 | .of_match = of_match_ptr(#regl_name),\ |
193 | .regulators_node = of_match_ptr("regulators"),\ |
194 | .type = REGULATOR_VOLTAGE,\ |
195 | .owner = THIS_MODULE,\ |
196 | .ops = &pv88090_ldo_ops,\ |
197 | .min_uV = min, \ |
198 | .uV_step = step, \ |
199 | .n_voltages = ((max) - (min))/(step) + 1, \ |
200 | .enable_reg = PV88090_REG_##regl_name##_CONT, \ |
201 | .enable_mask = PV88090_##regl_name##_EN, \ |
202 | .vsel_reg = PV88090_REG_##regl_name##_CONT, \ |
203 | .vsel_mask = PV88090_V##regl_name##_MASK, \ |
204 | },\ |
205 | } |
206 | |
207 | static struct pv88090_regulator pv88090_regulator_info[] = { |
208 | PV88090_BUCK(PV88090, BUCK1, 600000, 6250, 1393750, |
209 | pv88090_buck1_limits), |
210 | PV88090_BUCK(PV88090, BUCK2, 600000, 6250, 1393750, |
211 | pv88090_buck23_limits), |
212 | PV88090_BUCK(PV88090, BUCK3, 600000, 6250, 1393750, |
213 | pv88090_buck23_limits), |
214 | PV88090_LDO(PV88090, LDO1, 1200000, 50000, 4350000), |
215 | PV88090_LDO(PV88090, LDO2, 650000, 25000, 2225000), |
216 | }; |
217 | |
218 | static irqreturn_t pv88090_irq_handler(int irq, void *data) |
219 | { |
220 | struct pv88090 *chip = data; |
221 | int i, reg_val, err, ret = IRQ_NONE; |
222 | |
223 | err = regmap_read(map: chip->regmap, PV88090_REG_EVENT_A, val: ®_val); |
224 | if (err < 0) |
225 | goto error_i2c; |
226 | |
227 | if (reg_val & PV88090_E_VDD_FLT) { |
228 | for (i = 0; i < PV88090_MAX_REGULATORS; i++) { |
229 | if (chip->rdev[i] != NULL) |
230 | regulator_notifier_call_chain(rdev: chip->rdev[i], |
231 | REGULATOR_EVENT_UNDER_VOLTAGE, |
232 | NULL); |
233 | } |
234 | |
235 | err = regmap_write(map: chip->regmap, PV88090_REG_EVENT_A, |
236 | PV88090_E_VDD_FLT); |
237 | if (err < 0) |
238 | goto error_i2c; |
239 | |
240 | ret = IRQ_HANDLED; |
241 | } |
242 | |
243 | if (reg_val & PV88090_E_OVER_TEMP) { |
244 | for (i = 0; i < PV88090_MAX_REGULATORS; i++) { |
245 | if (chip->rdev[i] != NULL) |
246 | regulator_notifier_call_chain(rdev: chip->rdev[i], |
247 | REGULATOR_EVENT_OVER_TEMP, |
248 | NULL); |
249 | } |
250 | |
251 | err = regmap_write(map: chip->regmap, PV88090_REG_EVENT_A, |
252 | PV88090_E_OVER_TEMP); |
253 | if (err < 0) |
254 | goto error_i2c; |
255 | |
256 | ret = IRQ_HANDLED; |
257 | } |
258 | |
259 | return ret; |
260 | |
261 | error_i2c: |
262 | dev_err(chip->dev, "I2C error : %d\n" , err); |
263 | return IRQ_NONE; |
264 | } |
265 | |
266 | /* |
267 | * I2C driver interface functions |
268 | */ |
269 | static int pv88090_i2c_probe(struct i2c_client *i2c) |
270 | { |
271 | struct regulator_init_data *init_data = dev_get_platdata(dev: &i2c->dev); |
272 | struct pv88090 *chip; |
273 | struct regulator_config config = { }; |
274 | int error, i, ret = 0; |
275 | unsigned int conf2, range, index; |
276 | |
277 | chip = devm_kzalloc(dev: &i2c->dev, size: sizeof(struct pv88090), GFP_KERNEL); |
278 | if (!chip) |
279 | return -ENOMEM; |
280 | |
281 | chip->dev = &i2c->dev; |
282 | chip->regmap = devm_regmap_init_i2c(i2c, &pv88090_regmap_config); |
283 | if (IS_ERR(ptr: chip->regmap)) { |
284 | error = PTR_ERR(ptr: chip->regmap); |
285 | dev_err(chip->dev, "Failed to allocate register map: %d\n" , |
286 | error); |
287 | return error; |
288 | } |
289 | |
290 | i2c_set_clientdata(client: i2c, data: chip); |
291 | |
292 | if (i2c->irq != 0) { |
293 | ret = regmap_write(map: chip->regmap, PV88090_REG_MASK_A, val: 0xFF); |
294 | if (ret < 0) { |
295 | dev_err(chip->dev, |
296 | "Failed to mask A reg: %d\n" , ret); |
297 | return ret; |
298 | } |
299 | |
300 | ret = regmap_write(map: chip->regmap, PV88090_REG_MASK_B, val: 0xFF); |
301 | if (ret < 0) { |
302 | dev_err(chip->dev, |
303 | "Failed to mask B reg: %d\n" , ret); |
304 | return ret; |
305 | } |
306 | |
307 | ret = devm_request_threaded_irq(dev: &i2c->dev, irq: i2c->irq, NULL, |
308 | thread_fn: pv88090_irq_handler, |
309 | IRQF_TRIGGER_LOW|IRQF_ONESHOT, |
310 | devname: "pv88090" , dev_id: chip); |
311 | if (ret != 0) { |
312 | dev_err(chip->dev, "Failed to request IRQ: %d\n" , |
313 | i2c->irq); |
314 | return ret; |
315 | } |
316 | |
317 | ret = regmap_update_bits(map: chip->regmap, PV88090_REG_MASK_A, |
318 | PV88090_M_VDD_FLT | PV88090_M_OVER_TEMP, val: 0); |
319 | if (ret < 0) { |
320 | dev_err(chip->dev, |
321 | "Failed to update mask reg: %d\n" , ret); |
322 | return ret; |
323 | } |
324 | |
325 | } else { |
326 | dev_warn(chip->dev, "No IRQ configured\n" ); |
327 | } |
328 | |
329 | config.dev = chip->dev; |
330 | config.regmap = chip->regmap; |
331 | |
332 | for (i = 0; i < PV88090_MAX_REGULATORS; i++) { |
333 | if (init_data) |
334 | config.init_data = &init_data[i]; |
335 | |
336 | if (i == PV88090_ID_BUCK2 || i == PV88090_ID_BUCK3) { |
337 | ret = regmap_read(map: chip->regmap, |
338 | reg: pv88090_regulator_info[i].conf2, val: &conf2); |
339 | if (ret < 0) |
340 | return ret; |
341 | |
342 | conf2 = (conf2 >> PV88090_BUCK_VDAC_RANGE_SHIFT) & |
343 | PV88090_BUCK_VDAC_RANGE_MASK; |
344 | |
345 | ret = regmap_read(map: chip->regmap, |
346 | PV88090_REG_BUCK_FOLD_RANGE, val: &range); |
347 | if (ret < 0) |
348 | return ret; |
349 | |
350 | range = (range >> |
351 | (PV88090_BUCK_VRANGE_GAIN_SHIFT + i - 1)) & |
352 | PV88090_BUCK_VRANGE_GAIN_MASK; |
353 | index = ((range << 1) | conf2); |
354 | if (index > PV88090_ID_BUCK3) { |
355 | dev_err(chip->dev, |
356 | "Invalid index(%d)\n" , index); |
357 | return -EINVAL; |
358 | } |
359 | |
360 | pv88090_regulator_info[i].desc.min_uV |
361 | = pv88090_buck_vol[index].min_uV; |
362 | pv88090_regulator_info[i].desc.uV_step |
363 | = pv88090_buck_vol[index].uV_step; |
364 | pv88090_regulator_info[i].desc.n_voltages |
365 | = ((pv88090_buck_vol[index].max_uV) |
366 | - (pv88090_buck_vol[index].min_uV)) |
367 | /(pv88090_buck_vol[index].uV_step) + 1; |
368 | } |
369 | |
370 | config.driver_data = (void *)&pv88090_regulator_info[i]; |
371 | chip->rdev[i] = devm_regulator_register(dev: chip->dev, |
372 | regulator_desc: &pv88090_regulator_info[i].desc, config: &config); |
373 | if (IS_ERR(ptr: chip->rdev[i])) { |
374 | dev_err(chip->dev, |
375 | "Failed to register PV88090 regulator\n" ); |
376 | return PTR_ERR(ptr: chip->rdev[i]); |
377 | } |
378 | } |
379 | |
380 | return 0; |
381 | } |
382 | |
383 | static const struct i2c_device_id pv88090_i2c_id[] = { |
384 | {"pv88090" , 0}, |
385 | {}, |
386 | }; |
387 | MODULE_DEVICE_TABLE(i2c, pv88090_i2c_id); |
388 | |
389 | #ifdef CONFIG_OF |
390 | static const struct of_device_id pv88090_dt_ids[] = { |
391 | { .compatible = "pvs,pv88090" , .data = &pv88090_i2c_id[0] }, |
392 | {}, |
393 | }; |
394 | MODULE_DEVICE_TABLE(of, pv88090_dt_ids); |
395 | #endif |
396 | |
397 | static struct i2c_driver pv88090_regulator_driver = { |
398 | .driver = { |
399 | .name = "pv88090" , |
400 | .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
401 | .of_match_table = of_match_ptr(pv88090_dt_ids), |
402 | }, |
403 | .probe = pv88090_i2c_probe, |
404 | .id_table = pv88090_i2c_id, |
405 | }; |
406 | |
407 | module_i2c_driver(pv88090_regulator_driver); |
408 | |
409 | MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>" ); |
410 | MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88090" ); |
411 | MODULE_LICENSE("GPL" ); |
412 | |