1 | // SPDX-License-Identifier: GPL-2.0+ |
2 | |
3 | #include <linux/delay.h> |
4 | #include <linux/gpio/consumer.h> |
5 | #include <linux/i2c.h> |
6 | #include <linux/interrupt.h> |
7 | #include <linux/kernel.h> |
8 | #include <linux/module.h> |
9 | #include <linux/property.h> |
10 | #include <linux/regmap.h> |
11 | #include <linux/regulator/driver.h> |
12 | |
13 | #define RTMV20_REG_DEVINFO 0x00 |
14 | #define RTMV20_REG_PULSEDELAY 0x01 |
15 | #define RTMV20_REG_PULSEWIDTH 0x03 |
16 | #define RTMV20_REG_LDCTRL1 0x05 |
17 | #define RTMV20_REG_ESPULSEWIDTH 0x06 |
18 | #define RTMV20_REG_ESLDCTRL1 0x08 |
19 | #define RTMV20_REG_LBP 0x0A |
20 | #define RTMV20_REG_LDCTRL2 0x0B |
21 | #define RTMV20_REG_FSIN1CTRL1 0x0D |
22 | #define RTMV20_REG_FSIN1CTRL3 0x0F |
23 | #define RTMV20_REG_FSIN2CTRL1 0x10 |
24 | #define RTMV20_REG_FSIN2CTRL3 0x12 |
25 | #define RTMV20_REG_ENCTRL 0x13 |
26 | #define RTMV20_REG_STRBVSYNDLYL 0x29 |
27 | #define RTMV20_REG_LDIRQ 0x30 |
28 | #define RTMV20_REG_LDSTAT 0x40 |
29 | #define RTMV20_REG_LDMASK 0x50 |
30 | #define RTMV20_MAX_REGS (RTMV20_REG_LDMASK + 1) |
31 | |
32 | #define RTMV20_VID_MASK GENMASK(7, 4) |
33 | #define RICHTEK_VID 0x80 |
34 | #define RTMV20_LDCURR_MASK GENMASK(7, 0) |
35 | #define RTMV20_DELAY_MASK GENMASK(9, 0) |
36 | #define RTMV20_WIDTH_MASK GENMASK(13, 0) |
37 | #define RTMV20_WIDTH2_MASK GENMASK(7, 0) |
38 | #define RTMV20_LBPLVL_MASK GENMASK(3, 0) |
39 | #define RTMV20_LBPEN_MASK BIT(7) |
40 | #define RTMV20_STROBEPOL_MASK BIT(0) |
41 | #define RTMV20_VSYNPOL_MASK BIT(1) |
42 | #define RTMV20_FSINEN_MASK BIT(7) |
43 | #define RTMV20_ESEN_MASK BIT(6) |
44 | #define RTMV20_FSINOUT_MASK BIT(2) |
45 | #define LDENABLE_MASK (BIT(3) | BIT(0)) |
46 | |
47 | #define OTPEVT_MASK BIT(4) |
48 | #define SHORTEVT_MASK BIT(3) |
49 | #define OPENEVT_MASK BIT(2) |
50 | #define LBPEVT_MASK BIT(1) |
51 | #define OCPEVT_MASK BIT(0) |
52 | #define FAILEVT_MASK (SHORTEVT_MASK | OPENEVT_MASK | LBPEVT_MASK) |
53 | |
54 | #define RTMV20_LSW_MINUA 0 |
55 | #define RTMV20_LSW_MAXUA 6000000 |
56 | #define RTMV20_LSW_STEPUA 30000 |
57 | |
58 | #define RTMV20_LSW_DEFAULTUA 3000000 |
59 | |
60 | #define RTMV20_I2CRDY_TIMEUS 200 |
61 | #define RTMV20_CSRDY_TIMEUS 2000 |
62 | |
63 | struct rtmv20_priv { |
64 | struct device *dev; |
65 | struct regmap *regmap; |
66 | struct gpio_desc *enable_gpio; |
67 | struct regulator_dev *rdev; |
68 | }; |
69 | |
70 | static int rtmv20_lsw_enable(struct regulator_dev *rdev) |
71 | { |
72 | struct rtmv20_priv *priv = rdev_get_drvdata(rdev); |
73 | int ret; |
74 | |
75 | gpiod_set_value(desc: priv->enable_gpio, value: 1); |
76 | |
77 | /* Wait for I2C can be accessed */ |
78 | usleep_range(RTMV20_I2CRDY_TIMEUS, RTMV20_I2CRDY_TIMEUS + 100); |
79 | |
80 | /* HW re-enable, disable cache only and sync regcache here */ |
81 | regcache_cache_only(map: priv->regmap, enable: false); |
82 | ret = regcache_sync(map: priv->regmap); |
83 | if (ret) |
84 | return ret; |
85 | |
86 | return regulator_enable_regmap(rdev); |
87 | } |
88 | |
89 | static int rtmv20_lsw_disable(struct regulator_dev *rdev) |
90 | { |
91 | struct rtmv20_priv *priv = rdev_get_drvdata(rdev); |
92 | int ret; |
93 | |
94 | ret = regulator_disable_regmap(rdev); |
95 | if (ret) |
96 | return ret; |
97 | |
98 | /* Mark the regcache as dirty and cache only before HW disabled */ |
99 | regcache_cache_only(map: priv->regmap, enable: true); |
100 | regcache_mark_dirty(map: priv->regmap); |
101 | |
102 | gpiod_set_value(desc: priv->enable_gpio, value: 0); |
103 | |
104 | return 0; |
105 | } |
106 | |
107 | static int rtmv20_lsw_set_current_limit(struct regulator_dev *rdev, int min_uA, |
108 | int max_uA) |
109 | { |
110 | int sel; |
111 | |
112 | if (min_uA > RTMV20_LSW_MAXUA || max_uA < RTMV20_LSW_MINUA) |
113 | return -EINVAL; |
114 | |
115 | if (max_uA > RTMV20_LSW_MAXUA) |
116 | max_uA = RTMV20_LSW_MAXUA; |
117 | |
118 | sel = (max_uA - RTMV20_LSW_MINUA) / RTMV20_LSW_STEPUA; |
119 | |
120 | /* Ensure the selected setting is still in range */ |
121 | if ((sel * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA) < min_uA) |
122 | return -EINVAL; |
123 | |
124 | sel <<= ffs(rdev->desc->csel_mask) - 1; |
125 | |
126 | return regmap_update_bits(map: rdev->regmap, reg: rdev->desc->csel_reg, |
127 | mask: rdev->desc->csel_mask, val: sel); |
128 | } |
129 | |
130 | static int rtmv20_lsw_get_current_limit(struct regulator_dev *rdev) |
131 | { |
132 | unsigned int val; |
133 | int ret; |
134 | |
135 | ret = regmap_read(map: rdev->regmap, reg: rdev->desc->csel_reg, val: &val); |
136 | if (ret) |
137 | return ret; |
138 | |
139 | val &= rdev->desc->csel_mask; |
140 | val >>= ffs(rdev->desc->csel_mask) - 1; |
141 | |
142 | return val * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA; |
143 | } |
144 | |
145 | static const struct regulator_ops rtmv20_regulator_ops = { |
146 | .set_current_limit = rtmv20_lsw_set_current_limit, |
147 | .get_current_limit = rtmv20_lsw_get_current_limit, |
148 | .enable = rtmv20_lsw_enable, |
149 | .disable = rtmv20_lsw_disable, |
150 | .is_enabled = regulator_is_enabled_regmap, |
151 | }; |
152 | |
153 | static const struct regulator_desc rtmv20_lsw_desc = { |
154 | .name = "rtmv20,lsw" , |
155 | .of_match = of_match_ptr("lsw" ), |
156 | .type = REGULATOR_CURRENT, |
157 | .owner = THIS_MODULE, |
158 | .ops = &rtmv20_regulator_ops, |
159 | .csel_reg = RTMV20_REG_LDCTRL1, |
160 | .csel_mask = RTMV20_LDCURR_MASK, |
161 | .enable_reg = RTMV20_REG_ENCTRL, |
162 | .enable_mask = LDENABLE_MASK, |
163 | .enable_time = RTMV20_CSRDY_TIMEUS, |
164 | }; |
165 | |
166 | static irqreturn_t rtmv20_irq_handler(int irq, void *data) |
167 | { |
168 | struct rtmv20_priv *priv = data; |
169 | unsigned int val; |
170 | int ret; |
171 | |
172 | ret = regmap_read(map: priv->regmap, RTMV20_REG_LDIRQ, val: &val); |
173 | if (ret) { |
174 | dev_err(priv->dev, "Failed to get irq flags\n" ); |
175 | return IRQ_NONE; |
176 | } |
177 | |
178 | if (val & OTPEVT_MASK) |
179 | regulator_notifier_call_chain(rdev: priv->rdev, REGULATOR_EVENT_OVER_TEMP, NULL); |
180 | |
181 | if (val & OCPEVT_MASK) |
182 | regulator_notifier_call_chain(rdev: priv->rdev, REGULATOR_EVENT_OVER_CURRENT, NULL); |
183 | |
184 | if (val & FAILEVT_MASK) |
185 | regulator_notifier_call_chain(rdev: priv->rdev, REGULATOR_EVENT_FAIL, NULL); |
186 | |
187 | return IRQ_HANDLED; |
188 | } |
189 | |
190 | static u32 clamp_to_selector(u32 val, u32 min, u32 max, u32 step) |
191 | { |
192 | u32 retval = clamp_val(val, min, max); |
193 | |
194 | return (retval - min) / step; |
195 | } |
196 | |
197 | static int rtmv20_properties_init(struct rtmv20_priv *priv) |
198 | { |
199 | const struct { |
200 | const char *name; |
201 | u32 def; |
202 | u32 min; |
203 | u32 max; |
204 | u32 step; |
205 | u32 addr; |
206 | u32 mask; |
207 | } props[] = { |
208 | { "richtek,ld-pulse-delay-us" , 0, 0, 100000, 100, RTMV20_REG_PULSEDELAY, |
209 | RTMV20_DELAY_MASK }, |
210 | { "richtek,ld-pulse-width-us" , 1200, 0, 10000, 1, RTMV20_REG_PULSEWIDTH, |
211 | RTMV20_WIDTH_MASK }, |
212 | { "richtek,fsin1-delay-us" , 23000, 0, 100000, 100, RTMV20_REG_FSIN1CTRL1, |
213 | RTMV20_DELAY_MASK }, |
214 | { "richtek,fsin1-width-us" , 160, 40, 10000, 40, RTMV20_REG_FSIN1CTRL3, |
215 | RTMV20_WIDTH2_MASK }, |
216 | { "richtek,fsin2-delay-us" , 23000, 0, 100000, 100, RTMV20_REG_FSIN2CTRL1, |
217 | RTMV20_DELAY_MASK }, |
218 | { "richtek,fsin2-width-us" , 160, 40, 10000, 40, RTMV20_REG_FSIN2CTRL3, |
219 | RTMV20_WIDTH2_MASK }, |
220 | { "richtek,es-pulse-width-us" , 1200, 0, 10000, 1, RTMV20_REG_ESPULSEWIDTH, |
221 | RTMV20_WIDTH_MASK }, |
222 | { "richtek,es-ld-current-microamp" , 3000000, 0, 6000000, 30000, |
223 | RTMV20_REG_ESLDCTRL1, RTMV20_LDCURR_MASK }, |
224 | { "richtek,lbp-level-microvolt" , 2700000, 2400000, 3700000, 100000, RTMV20_REG_LBP, |
225 | RTMV20_LBPLVL_MASK }, |
226 | { "richtek,lbp-enable" , 0, 0, 1, 1, RTMV20_REG_LBP, RTMV20_LBPEN_MASK }, |
227 | { "richtek,strobe-polarity-high" , 1, 0, 1, 1, RTMV20_REG_LDCTRL2, |
228 | RTMV20_STROBEPOL_MASK }, |
229 | { "richtek,vsync-polarity-high" , 1, 0, 1, 1, RTMV20_REG_LDCTRL2, |
230 | RTMV20_VSYNPOL_MASK }, |
231 | { "richtek,fsin-enable" , 0, 0, 1, 1, RTMV20_REG_ENCTRL, RTMV20_FSINEN_MASK }, |
232 | { "richtek,fsin-output" , 0, 0, 1, 1, RTMV20_REG_ENCTRL, RTMV20_FSINOUT_MASK }, |
233 | { "richtek,es-enable" , 0, 0, 1, 1, RTMV20_REG_ENCTRL, RTMV20_ESEN_MASK }, |
234 | }; |
235 | int i, ret; |
236 | |
237 | for (i = 0; i < ARRAY_SIZE(props); i++) { |
238 | __be16 bval16; |
239 | u16 val16; |
240 | u32 temp; |
241 | int significant_bit = fls(x: props[i].mask); |
242 | int shift = ffs(props[i].mask) - 1; |
243 | |
244 | if (props[i].max > 1) { |
245 | ret = device_property_read_u32(dev: priv->dev, propname: props[i].name, val: &temp); |
246 | if (ret) |
247 | temp = props[i].def; |
248 | } else |
249 | temp = device_property_read_bool(dev: priv->dev, propname: props[i].name); |
250 | |
251 | temp = clamp_to_selector(val: temp, min: props[i].min, max: props[i].max, step: props[i].step); |
252 | |
253 | /* If significant bit is over 8, two byte access, others one */ |
254 | if (significant_bit > 8) { |
255 | ret = regmap_raw_read(map: priv->regmap, reg: props[i].addr, val: &bval16, val_len: sizeof(bval16)); |
256 | if (ret) |
257 | return ret; |
258 | |
259 | val16 = be16_to_cpu(bval16); |
260 | val16 &= ~props[i].mask; |
261 | val16 |= (temp << shift); |
262 | bval16 = cpu_to_be16(val16); |
263 | |
264 | ret = regmap_raw_write(map: priv->regmap, reg: props[i].addr, val: &bval16, |
265 | val_len: sizeof(bval16)); |
266 | } else { |
267 | ret = regmap_update_bits(map: priv->regmap, reg: props[i].addr, mask: props[i].mask, |
268 | val: temp << shift); |
269 | } |
270 | |
271 | if (ret) |
272 | return ret; |
273 | } |
274 | |
275 | return 0; |
276 | } |
277 | |
278 | static int rtmv20_check_chip_exist(struct rtmv20_priv *priv) |
279 | { |
280 | unsigned int val; |
281 | int ret; |
282 | |
283 | ret = regmap_read(map: priv->regmap, RTMV20_REG_DEVINFO, val: &val); |
284 | if (ret) |
285 | return ret; |
286 | |
287 | if ((val & RTMV20_VID_MASK) != RICHTEK_VID) |
288 | return -ENODEV; |
289 | |
290 | return 0; |
291 | } |
292 | |
293 | static bool rtmv20_is_accessible_reg(struct device *dev, unsigned int reg) |
294 | { |
295 | switch (reg) { |
296 | case RTMV20_REG_DEVINFO ... RTMV20_REG_STRBVSYNDLYL: |
297 | case RTMV20_REG_LDIRQ: |
298 | case RTMV20_REG_LDSTAT: |
299 | case RTMV20_REG_LDMASK: |
300 | return true; |
301 | } |
302 | return false; |
303 | } |
304 | |
305 | static bool rtmv20_is_volatile_reg(struct device *dev, unsigned int reg) |
306 | { |
307 | if (reg == RTMV20_REG_LDIRQ || reg == RTMV20_REG_LDSTAT) |
308 | return true; |
309 | return false; |
310 | } |
311 | |
312 | static const struct regmap_config rtmv20_regmap_config = { |
313 | .reg_bits = 8, |
314 | .val_bits = 8, |
315 | .cache_type = REGCACHE_RBTREE, |
316 | .max_register = RTMV20_REG_LDMASK, |
317 | .num_reg_defaults_raw = RTMV20_MAX_REGS, |
318 | |
319 | .writeable_reg = rtmv20_is_accessible_reg, |
320 | .readable_reg = rtmv20_is_accessible_reg, |
321 | .volatile_reg = rtmv20_is_volatile_reg, |
322 | }; |
323 | |
324 | static int rtmv20_probe(struct i2c_client *i2c) |
325 | { |
326 | struct rtmv20_priv *priv; |
327 | struct regulator_config config = {}; |
328 | int ret; |
329 | |
330 | priv = devm_kzalloc(dev: &i2c->dev, size: sizeof(*priv), GFP_KERNEL); |
331 | if (!priv) |
332 | return -ENOMEM; |
333 | |
334 | priv->dev = &i2c->dev; |
335 | |
336 | /* Before regmap register, configure HW enable to make I2C accessible */ |
337 | priv->enable_gpio = devm_gpiod_get(dev: &i2c->dev, con_id: "enable" , flags: GPIOD_OUT_HIGH); |
338 | if (IS_ERR(ptr: priv->enable_gpio)) { |
339 | dev_err(&i2c->dev, "Failed to get enable gpio\n" ); |
340 | return PTR_ERR(ptr: priv->enable_gpio); |
341 | } |
342 | |
343 | /* Wait for I2C can be accessed */ |
344 | usleep_range(RTMV20_I2CRDY_TIMEUS, RTMV20_I2CRDY_TIMEUS + 100); |
345 | |
346 | priv->regmap = devm_regmap_init_i2c(i2c, &rtmv20_regmap_config); |
347 | if (IS_ERR(ptr: priv->regmap)) { |
348 | dev_err(&i2c->dev, "Failed to allocate register map\n" ); |
349 | return PTR_ERR(ptr: priv->regmap); |
350 | } |
351 | |
352 | ret = rtmv20_check_chip_exist(priv); |
353 | if (ret) { |
354 | dev_err(&i2c->dev, "Chip vendor info is not matched\n" ); |
355 | return ret; |
356 | } |
357 | |
358 | ret = rtmv20_properties_init(priv); |
359 | if (ret) { |
360 | dev_err(&i2c->dev, "Failed to init properties\n" ); |
361 | return ret; |
362 | } |
363 | |
364 | /* |
365 | * keep in shutdown mode to minimize the current consumption |
366 | * and also mark regcache as dirty |
367 | */ |
368 | regcache_cache_only(map: priv->regmap, enable: true); |
369 | regcache_mark_dirty(map: priv->regmap); |
370 | gpiod_set_value(desc: priv->enable_gpio, value: 0); |
371 | |
372 | config.dev = &i2c->dev; |
373 | config.regmap = priv->regmap; |
374 | config.driver_data = priv; |
375 | priv->rdev = devm_regulator_register(dev: &i2c->dev, regulator_desc: &rtmv20_lsw_desc, config: &config); |
376 | if (IS_ERR(ptr: priv->rdev)) { |
377 | dev_err(&i2c->dev, "Failed to register regulator\n" ); |
378 | return PTR_ERR(ptr: priv->rdev); |
379 | } |
380 | |
381 | /* Unmask all events before IRQ registered */ |
382 | ret = regmap_write(map: priv->regmap, RTMV20_REG_LDMASK, val: 0); |
383 | if (ret) |
384 | return ret; |
385 | |
386 | return devm_request_threaded_irq(dev: &i2c->dev, irq: i2c->irq, NULL, thread_fn: rtmv20_irq_handler, |
387 | IRQF_ONESHOT, devname: dev_name(dev: &i2c->dev), dev_id: priv); |
388 | } |
389 | |
390 | static int __maybe_unused rtmv20_suspend(struct device *dev) |
391 | { |
392 | struct i2c_client *i2c = to_i2c_client(dev); |
393 | |
394 | /* |
395 | * When system suspend, disable irq to prevent interrupt trigger |
396 | * during I2C bus suspend |
397 | */ |
398 | disable_irq(irq: i2c->irq); |
399 | if (device_may_wakeup(dev)) |
400 | enable_irq_wake(irq: i2c->irq); |
401 | |
402 | return 0; |
403 | } |
404 | |
405 | static int __maybe_unused rtmv20_resume(struct device *dev) |
406 | { |
407 | struct i2c_client *i2c = to_i2c_client(dev); |
408 | |
409 | /* Enable irq after I2C bus already resume */ |
410 | enable_irq(irq: i2c->irq); |
411 | if (device_may_wakeup(dev)) |
412 | disable_irq_wake(irq: i2c->irq); |
413 | |
414 | return 0; |
415 | } |
416 | |
417 | static SIMPLE_DEV_PM_OPS(rtmv20_pm, rtmv20_suspend, rtmv20_resume); |
418 | |
419 | static const struct of_device_id __maybe_unused rtmv20_of_id[] = { |
420 | { .compatible = "richtek,rtmv20" , }, |
421 | {} |
422 | }; |
423 | MODULE_DEVICE_TABLE(of, rtmv20_of_id); |
424 | |
425 | static struct i2c_driver rtmv20_driver = { |
426 | .driver = { |
427 | .name = "rtmv20" , |
428 | .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
429 | .of_match_table = of_match_ptr(rtmv20_of_id), |
430 | .pm = &rtmv20_pm, |
431 | }, |
432 | .probe = rtmv20_probe, |
433 | }; |
434 | module_i2c_driver(rtmv20_driver); |
435 | |
436 | MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>" ); |
437 | MODULE_DESCRIPTION("Richtek RTMV20 Regulator Driver" ); |
438 | MODULE_LICENSE("GPL v2" ); |
439 | |