1/*
2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
4 *
5 * GPL LICENSE SUMMARY
6 *
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
23 *
24 * BSD LICENSE
25 *
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
28 *
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
31 * are met:
32 *
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
38 * distribution.
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
42 *
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54 */
55
56#ifndef _SCI_SAS_H_
57#define _SCI_SAS_H_
58
59#include <linux/kernel.h>
60
61/*
62 * SATA FIS Types These constants depict the various SATA FIS types devined in
63 * the serial ATA specification.
64 * XXX: This needs to go into <scsi/sas.h>
65 */
66#define FIS_REGH2D 0x27
67#define FIS_REGD2H 0x34
68#define FIS_SETDEVBITS 0xA1
69#define FIS_DMA_ACTIVATE 0x39
70#define FIS_DMA_SETUP 0x41
71#define FIS_BIST_ACTIVATE 0x58
72#define FIS_PIO_SETUP 0x5F
73#define FIS_DATA 0x46
74
75/**************************************************************************/
76#define SSP_RESP_IU_MAX_SIZE 280
77
78/*
79 * contents of the SSP COMMAND INFORMATION UNIT.
80 * For specific information on each of these individual fields please
81 * reference the SAS specification SSP transport layer section.
82 * XXX: This needs to go into <scsi/sas.h>
83 */
84struct ssp_cmd_iu {
85 u8 LUN[8];
86 u8 add_cdb_len:6;
87 u8 _r_a:2;
88 u8 _r_b;
89 u8 en_fburst:1;
90 u8 task_prio:4;
91 u8 task_attr:3;
92 u8 _r_c;
93
94 u8 cdb[16];
95} __packed;
96
97/*
98 * contents of the SSP TASK INFORMATION UNIT.
99 * For specific information on each of these individual fields please
100 * reference the SAS specification SSP transport layer section.
101 * XXX: This needs to go into <scsi/sas.h>
102 */
103struct ssp_task_iu {
104 u8 LUN[8];
105 u8 _r_a;
106 u8 task_func;
107 u8 _r_b[4];
108 u16 task_tag;
109 u8 _r_c[12];
110} __packed;
111
112
113/*
114 * struct smp_req_phy_id - This structure defines the contents of
115 * an SMP Request that is comprised of the struct smp_request_header and a
116 * phy identifier.
117 * Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA.
118 *
119 * For specific information on each of these individual fields please reference
120 * the SAS specification.
121 */
122struct smp_req_phy_id {
123 u8 _r_a[4]; /* bytes 4-7 */
124
125 u8 ign_zone_grp:1; /* byte 8 */
126 u8 _r_b:7;
127
128 u8 phy_id; /* byte 9 */
129 u8 _r_c; /* byte 10 */
130 u8 _r_d; /* byte 11 */
131} __packed;
132
133/*
134 * struct smp_req_config_route_info - This structure defines the
135 * contents of an SMP Configure Route Information request.
136 *
137 * For specific information on each of these individual fields please reference
138 * the SAS specification.
139 */
140struct smp_req_conf_rtinfo {
141 u16 exp_change_cnt; /* bytes 4-5 */
142 u8 exp_rt_idx_hi; /* byte 6 */
143 u8 exp_rt_idx; /* byte 7 */
144
145 u8 _r_a; /* byte 8 */
146 u8 phy_id; /* byte 9 */
147 u16 _r_b; /* bytes 10-11 */
148
149 u8 _r_c:7; /* byte 12 */
150 u8 dis_rt_entry:1;
151 u8 _r_d[3]; /* bytes 13-15 */
152
153 u8 rt_sas_addr[8]; /* bytes 16-23 */
154 u8 _r_e[16]; /* bytes 24-39 */
155} __packed;
156
157/*
158 * struct smp_req_phycntl - This structure defines the contents of an
159 * SMP Phy Controller request.
160 *
161 * For specific information on each of these individual fields please reference
162 * the SAS specification.
163 */
164struct smp_req_phycntl {
165 u16 exp_change_cnt; /* byte 4-5 */
166
167 u8 _r_a[3]; /* bytes 6-8 */
168
169 u8 phy_id; /* byte 9 */
170 u8 phy_op; /* byte 10 */
171
172 u8 upd_pathway:1; /* byte 11 */
173 u8 _r_b:7;
174
175 u8 _r_c[12]; /* byte 12-23 */
176
177 u8 att_dev_name[8]; /* byte 24-31 */
178
179 u8 _r_d:4; /* byte 32 */
180 u8 min_linkrate:4;
181
182 u8 _r_e:4; /* byte 33 */
183 u8 max_linkrate:4;
184
185 u8 _r_f[2]; /* byte 34-35 */
186
187 u8 pathway:4; /* byte 36 */
188 u8 _r_g:4;
189
190 u8 _r_h[3]; /* bytes 37-39 */
191} __packed;
192
193/*
194 * struct smp_req - This structure simply unionizes the existing request
195 * structures into a common request type.
196 *
197 * XXX: This data structure may need to go to scsi/sas.h
198 */
199struct smp_req {
200 u8 type; /* byte 0 */
201 u8 func; /* byte 1 */
202 u8 alloc_resp_len; /* byte 2 */
203 u8 req_len; /* byte 3 */
204 u8 req_data[];
205} __packed;
206
207/*
208 * struct sci_sas_address - This structure depicts how a SAS address is
209 * represented by SCI.
210 * XXX convert this to u8 [SAS_ADDR_SIZE] like the rest of libsas
211 *
212 */
213struct sci_sas_address {
214 u32 high;
215 u32 low;
216};
217#endif
218

source code of linux/drivers/scsi/isci/sas.h