1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2021-2023 Oracle. All Rights Reserved.
4 * Author: Darrick J. Wong <djwong@kernel.org>
5 */
6#include "xfs.h"
7#include "xfs_fs.h"
8#include "xfs_shared.h"
9#include "xfs_format.h"
10#include "scrub/scrub.h"
11#include "scrub/xfile.h"
12#include "scrub/xfarray.h"
13#include "scrub/trace.h"
14
15/*
16 * Large Arrays of Fixed-Size Records
17 * ==================================
18 *
19 * This memory array uses an xfile (which itself is a shmem file) to store
20 * large numbers of fixed-size records in memory that can be paged out. This
21 * puts less stress on the memory reclaim algorithms during an online repair
22 * because we don't have to pin so much memory. However, array access is less
23 * direct than would be in a regular memory array. Access to the array is
24 * performed via indexed load and store methods, and an append method is
25 * provided for convenience. Array elements can be unset, which sets them to
26 * all zeroes. Unset entries are skipped during iteration, though direct loads
27 * will return a zeroed buffer. Callers are responsible for concurrency
28 * control.
29 */
30
31/*
32 * Pointer to scratch space. Because we can't access the xfile data directly,
33 * we allocate a small amount of memory on the end of the xfarray structure to
34 * buffer array items when we need space to store values temporarily.
35 */
36static inline void *xfarray_scratch(struct xfarray *array)
37{
38 return (array + 1);
39}
40
41/* Compute array index given an xfile offset. */
42static xfarray_idx_t
43xfarray_idx(
44 struct xfarray *array,
45 loff_t pos)
46{
47 if (array->obj_size_log >= 0)
48 return (xfarray_idx_t)pos >> array->obj_size_log;
49
50 return div_u64((xfarray_idx_t)pos, array->obj_size);
51}
52
53/* Compute xfile offset of array element. */
54static inline loff_t xfarray_pos(struct xfarray *array, xfarray_idx_t idx)
55{
56 if (array->obj_size_log >= 0)
57 return idx << array->obj_size_log;
58
59 return idx * array->obj_size;
60}
61
62/*
63 * Initialize a big memory array. Array records cannot be larger than a
64 * page, and the array cannot span more bytes than the page cache supports.
65 * If @required_capacity is nonzero, the maximum array size will be set to this
66 * quantity and the array creation will fail if the underlying storage cannot
67 * support that many records.
68 */
69int
70xfarray_create(
71 const char *description,
72 unsigned long long required_capacity,
73 size_t obj_size,
74 struct xfarray **arrayp)
75{
76 struct xfarray *array;
77 struct xfile *xfile;
78 int error;
79
80 ASSERT(obj_size < PAGE_SIZE);
81
82 error = xfile_create(description, 0, &xfile);
83 if (error)
84 return error;
85
86 error = -ENOMEM;
87 array = kzalloc(sizeof(struct xfarray) + obj_size, XCHK_GFP_FLAGS);
88 if (!array)
89 goto out_xfile;
90
91 array->xfile = xfile;
92 array->obj_size = obj_size;
93
94 if (is_power_of_2(obj_size))
95 array->obj_size_log = ilog2(obj_size);
96 else
97 array->obj_size_log = -1;
98
99 array->max_nr = xfarray_idx(array, MAX_LFS_FILESIZE);
100 trace_xfarray_create(array, required_capacity);
101
102 if (required_capacity > 0) {
103 if (array->max_nr < required_capacity) {
104 error = -ENOMEM;
105 goto out_xfarray;
106 }
107 array->max_nr = required_capacity;
108 }
109
110 *arrayp = array;
111 return 0;
112
113out_xfarray:
114 kfree(array);
115out_xfile:
116 xfile_destroy(xfile);
117 return error;
118}
119
120/* Destroy the array. */
121void
122xfarray_destroy(
123 struct xfarray *array)
124{
125 xfile_destroy(array->xfile);
126 kfree(array);
127}
128
129/* Load an element from the array. */
130int
131xfarray_load(
132 struct xfarray *array,
133 xfarray_idx_t idx,
134 void *ptr)
135{
136 if (idx >= array->nr)
137 return -ENODATA;
138
139 return xfile_load(array->xfile, ptr, array->obj_size,
140 xfarray_pos(array, idx));
141}
142
143/* Is this array element potentially unset? */
144static inline bool
145xfarray_is_unset(
146 struct xfarray *array,
147 loff_t pos)
148{
149 void *temp = xfarray_scratch(array);
150 int error;
151
152 if (array->unset_slots == 0)
153 return false;
154
155 error = xfile_load(array->xfile, temp, array->obj_size, pos);
156 if (!error && xfarray_element_is_null(array, temp))
157 return true;
158
159 return false;
160}
161
162/*
163 * Unset an array element. If @idx is the last element in the array, the
164 * array will be truncated. Otherwise, the entry will be zeroed.
165 */
166int
167xfarray_unset(
168 struct xfarray *array,
169 xfarray_idx_t idx)
170{
171 void *temp = xfarray_scratch(array);
172 loff_t pos = xfarray_pos(array, idx);
173 int error;
174
175 if (idx >= array->nr)
176 return -ENODATA;
177
178 if (idx == array->nr - 1) {
179 array->nr--;
180 return 0;
181 }
182
183 if (xfarray_is_unset(array, pos))
184 return 0;
185
186 memset(temp, 0, array->obj_size);
187 error = xfile_store(array->xfile, temp, array->obj_size, pos);
188 if (error)
189 return error;
190
191 array->unset_slots++;
192 return 0;
193}
194
195/*
196 * Store an element in the array. The element must not be completely zeroed,
197 * because those are considered unset sparse elements.
198 */
199int
200xfarray_store(
201 struct xfarray *array,
202 xfarray_idx_t idx,
203 const void *ptr)
204{
205 int ret;
206
207 if (idx >= array->max_nr)
208 return -EFBIG;
209
210 ASSERT(!xfarray_element_is_null(array, ptr));
211
212 ret = xfile_store(array->xfile, ptr, array->obj_size,
213 xfarray_pos(array, idx));
214 if (ret)
215 return ret;
216
217 array->nr = max(array->nr, idx + 1);
218 return 0;
219}
220
221/* Is this array element NULL? */
222bool
223xfarray_element_is_null(
224 struct xfarray *array,
225 const void *ptr)
226{
227 return !memchr_inv(ptr, 0, array->obj_size);
228}
229
230/*
231 * Store an element anywhere in the array that is unset. If there are no
232 * unset slots, append the element to the array.
233 */
234int
235xfarray_store_anywhere(
236 struct xfarray *array,
237 const void *ptr)
238{
239 void *temp = xfarray_scratch(array);
240 loff_t endpos = xfarray_pos(array, array->nr);
241 loff_t pos;
242 int error;
243
244 /* Find an unset slot to put it in. */
245 for (pos = 0;
246 pos < endpos && array->unset_slots > 0;
247 pos += array->obj_size) {
248 error = xfile_load(array->xfile, temp, array->obj_size,
249 pos);
250 if (error || !xfarray_element_is_null(array, temp))
251 continue;
252
253 error = xfile_store(array->xfile, ptr, array->obj_size,
254 pos);
255 if (error)
256 return error;
257
258 array->unset_slots--;
259 return 0;
260 }
261
262 /* No unset slots found; attach it on the end. */
263 array->unset_slots = 0;
264 return xfarray_append(array, ptr);
265}
266
267/* Return length of array. */
268uint64_t
269xfarray_length(
270 struct xfarray *array)
271{
272 return array->nr;
273}
274
275/*
276 * Decide which array item we're going to read as part of an _iter_get.
277 * @cur is the array index, and @pos is the file offset of that array index in
278 * the backing xfile. Returns ENODATA if we reach the end of the records.
279 *
280 * Reading from a hole in a sparse xfile causes page instantiation, so for
281 * iterating a (possibly sparse) array we need to figure out if the cursor is
282 * pointing at a totally uninitialized hole and move the cursor up if
283 * necessary.
284 */
285static inline int
286xfarray_find_data(
287 struct xfarray *array,
288 xfarray_idx_t *cur,
289 loff_t *pos)
290{
291 unsigned int pgoff = offset_in_page(*pos);
292 loff_t end_pos = *pos + array->obj_size - 1;
293 loff_t new_pos;
294
295 /*
296 * If the current array record is not adjacent to a page boundary, we
297 * are in the middle of the page. We do not need to move the cursor.
298 */
299 if (pgoff != 0 && pgoff + array->obj_size - 1 < PAGE_SIZE)
300 return 0;
301
302 /*
303 * Call SEEK_DATA on the last byte in the record we're about to read.
304 * If the record ends at (or crosses) the end of a page then we know
305 * that the first byte of the record is backed by pages and don't need
306 * to query it. If instead the record begins at the start of the page
307 * then we know that querying the last byte is just as good as querying
308 * the first byte, since records cannot be larger than a page.
309 *
310 * If the call returns the same file offset, we know this record is
311 * backed by real pages. We do not need to move the cursor.
312 */
313 new_pos = xfile_seek_data(array->xfile, end_pos);
314 if (new_pos == -ENXIO)
315 return -ENODATA;
316 if (new_pos < 0)
317 return new_pos;
318 if (new_pos == end_pos)
319 return 0;
320
321 /*
322 * Otherwise, SEEK_DATA told us how far up to move the file pointer to
323 * find more data. Move the array index to the first record past the
324 * byte offset we were given.
325 */
326 new_pos = roundup_64(new_pos, array->obj_size);
327 *cur = xfarray_idx(array, new_pos);
328 *pos = xfarray_pos(array, *cur);
329 return 0;
330}
331
332/*
333 * Starting at *idx, fetch the next non-null array entry and advance the index
334 * to set up the next _load_next call. Returns ENODATA if we reach the end of
335 * the array. Callers must set @*idx to XFARRAY_CURSOR_INIT before the first
336 * call to this function.
337 */
338int
339xfarray_load_next(
340 struct xfarray *array,
341 xfarray_idx_t *idx,
342 void *rec)
343{
344 xfarray_idx_t cur = *idx;
345 loff_t pos = xfarray_pos(array, cur);
346 int error;
347
348 do {
349 if (cur >= array->nr)
350 return -ENODATA;
351
352 /*
353 * Ask the backing store for the location of next possible
354 * written record, then retrieve that record.
355 */
356 error = xfarray_find_data(array, &cur, &pos);
357 if (error)
358 return error;
359 error = xfarray_load(array, cur, rec);
360 if (error)
361 return error;
362
363 cur++;
364 pos += array->obj_size;
365 } while (xfarray_element_is_null(array, rec));
366
367 *idx = cur;
368 return 0;
369}
370
371/* Sorting functions */
372
373#ifdef DEBUG
374# define xfarray_sort_bump_loads(si) do { (si)->loads++; } while (0)
375# define xfarray_sort_bump_stores(si) do { (si)->stores++; } while (0)
376# define xfarray_sort_bump_compares(si) do { (si)->compares++; } while (0)
377# define xfarray_sort_bump_heapsorts(si) do { (si)->heapsorts++; } while (0)
378#else
379# define xfarray_sort_bump_loads(si)
380# define xfarray_sort_bump_stores(si)
381# define xfarray_sort_bump_compares(si)
382# define xfarray_sort_bump_heapsorts(si)
383#endif /* DEBUG */
384
385/* Load an array element for sorting. */
386static inline int
387xfarray_sort_load(
388 struct xfarray_sortinfo *si,
389 xfarray_idx_t idx,
390 void *ptr)
391{
392 xfarray_sort_bump_loads(si);
393 return xfarray_load(si->array, idx, ptr);
394}
395
396/* Store an array element for sorting. */
397static inline int
398xfarray_sort_store(
399 struct xfarray_sortinfo *si,
400 xfarray_idx_t idx,
401 void *ptr)
402{
403 xfarray_sort_bump_stores(si);
404 return xfarray_store(si->array, idx, ptr);
405}
406
407/* Compare an array element for sorting. */
408static inline int
409xfarray_sort_cmp(
410 struct xfarray_sortinfo *si,
411 const void *a,
412 const void *b)
413{
414 xfarray_sort_bump_compares(si);
415 return si->cmp_fn(a, b);
416}
417
418/* Return a pointer to the low index stack for quicksort partitioning. */
419static inline xfarray_idx_t *xfarray_sortinfo_lo(struct xfarray_sortinfo *si)
420{
421 return (xfarray_idx_t *)(si + 1);
422}
423
424/* Return a pointer to the high index stack for quicksort partitioning. */
425static inline xfarray_idx_t *xfarray_sortinfo_hi(struct xfarray_sortinfo *si)
426{
427 return xfarray_sortinfo_lo(si) + si->max_stack_depth;
428}
429
430/* Size of each element in the quicksort pivot array. */
431static inline size_t
432xfarray_pivot_rec_sz(
433 struct xfarray *array)
434{
435 return round_up(array->obj_size, 8) + sizeof(xfarray_idx_t);
436}
437
438/* Allocate memory to handle the sort. */
439static inline int
440xfarray_sortinfo_alloc(
441 struct xfarray *array,
442 xfarray_cmp_fn cmp_fn,
443 unsigned int flags,
444 struct xfarray_sortinfo **infop)
445{
446 struct xfarray_sortinfo *si;
447 size_t nr_bytes = sizeof(struct xfarray_sortinfo);
448 size_t pivot_rec_sz = xfarray_pivot_rec_sz(array);
449 int max_stack_depth;
450
451 /*
452 * The median-of-nine pivot algorithm doesn't work if a subset has
453 * fewer than 9 items. Make sure the in-memory sort will always take
454 * over for subsets where this wouldn't be the case.
455 */
456 BUILD_BUG_ON(XFARRAY_QSORT_PIVOT_NR >= XFARRAY_ISORT_NR);
457
458 /*
459 * Tail-call recursion during the partitioning phase means that
460 * quicksort will never recurse more than log2(nr) times. We need one
461 * extra level of stack to hold the initial parameters. In-memory
462 * sort will always take care of the last few levels of recursion for
463 * us, so we can reduce the stack depth by that much.
464 */
465 max_stack_depth = ilog2(array->nr) + 1 - (XFARRAY_ISORT_SHIFT - 1);
466 if (max_stack_depth < 1)
467 max_stack_depth = 1;
468
469 /* Each level of quicksort uses a lo and a hi index */
470 nr_bytes += max_stack_depth * sizeof(xfarray_idx_t) * 2;
471
472 /* Scratchpad for in-memory sort, or finding the pivot */
473 nr_bytes += max_t(size_t,
474 (XFARRAY_QSORT_PIVOT_NR + 1) * pivot_rec_sz,
475 XFARRAY_ISORT_NR * array->obj_size);
476
477 si = kvzalloc(nr_bytes, XCHK_GFP_FLAGS);
478 if (!si)
479 return -ENOMEM;
480
481 si->array = array;
482 si->cmp_fn = cmp_fn;
483 si->flags = flags;
484 si->max_stack_depth = max_stack_depth;
485 si->max_stack_used = 1;
486
487 xfarray_sortinfo_lo(si)[0] = 0;
488 xfarray_sortinfo_hi(si)[0] = array->nr - 1;
489 si->relax = INIT_XCHK_RELAX;
490 if (flags & XFARRAY_SORT_KILLABLE)
491 si->relax.interruptible = false;
492
493 trace_xfarray_sort(si, nr_bytes);
494 *infop = si;
495 return 0;
496}
497
498/* Should this sort be terminated by a fatal signal? */
499static inline bool
500xfarray_sort_terminated(
501 struct xfarray_sortinfo *si,
502 int *error)
503{
504 /*
505 * If preemption is disabled, we need to yield to the scheduler every
506 * few seconds so that we don't run afoul of the soft lockup watchdog
507 * or RCU stall detector.
508 */
509 if (xchk_maybe_relax(&si->relax)) {
510 if (*error == 0)
511 *error = -EINTR;
512 return true;
513 }
514 return false;
515}
516
517/* Do we want an in-memory sort? */
518static inline bool
519xfarray_want_isort(
520 struct xfarray_sortinfo *si,
521 xfarray_idx_t start,
522 xfarray_idx_t end)
523{
524 /*
525 * For array subsets that fit in the scratchpad, it's much faster to
526 * use the kernel's heapsort than quicksort's stack machine.
527 */
528 return (end - start) < XFARRAY_ISORT_NR;
529}
530
531/* Return the scratch space within the sortinfo structure. */
532static inline void *xfarray_sortinfo_isort_scratch(struct xfarray_sortinfo *si)
533{
534 return xfarray_sortinfo_hi(si) + si->max_stack_depth;
535}
536
537/*
538 * Sort a small number of array records using scratchpad memory. The records
539 * need not be contiguous in the xfile's memory pages.
540 */
541STATIC int
542xfarray_isort(
543 struct xfarray_sortinfo *si,
544 xfarray_idx_t lo,
545 xfarray_idx_t hi)
546{
547 void *scratch = xfarray_sortinfo_isort_scratch(si);
548 loff_t lo_pos = xfarray_pos(si->array, lo);
549 loff_t len = xfarray_pos(si->array, hi - lo + 1);
550 int error;
551
552 trace_xfarray_isort(si, lo, hi);
553
554 xfarray_sort_bump_loads(si);
555 error = xfile_load(si->array->xfile, scratch, len, lo_pos);
556 if (error)
557 return error;
558
559 xfarray_sort_bump_heapsorts(si);
560 sort(scratch, hi - lo + 1, si->array->obj_size, si->cmp_fn, NULL);
561
562 xfarray_sort_bump_stores(si);
563 return xfile_store(si->array->xfile, scratch, len, lo_pos);
564}
565
566/*
567 * Sort the records from lo to hi (inclusive) if they are all backed by the
568 * same memory folio. Returns 1 if it sorted, 0 if it did not, or a negative
569 * errno.
570 */
571STATIC int
572xfarray_foliosort(
573 struct xfarray_sortinfo *si,
574 xfarray_idx_t lo,
575 xfarray_idx_t hi)
576{
577 struct folio *folio;
578 void *startp;
579 loff_t lo_pos = xfarray_pos(si->array, lo);
580 uint64_t len = xfarray_pos(si->array, hi - lo + 1);
581
582 /* No single folio could back this many records. */
583 if (len > XFILE_MAX_FOLIO_SIZE)
584 return 0;
585
586 xfarray_sort_bump_loads(si);
587 folio = xfile_get_folio(si->array->xfile, lo_pos, len, XFILE_ALLOC);
588 if (IS_ERR(folio))
589 return PTR_ERR(folio);
590 if (!folio)
591 return 0;
592
593 trace_xfarray_foliosort(si, lo, hi);
594
595 xfarray_sort_bump_heapsorts(si);
596 startp = folio_address(folio) + offset_in_folio(folio, lo_pos);
597 sort(startp, hi - lo + 1, si->array->obj_size, si->cmp_fn, NULL);
598
599 xfarray_sort_bump_stores(si);
600 xfile_put_folio(si->array->xfile, folio);
601 return 1;
602}
603
604/* Return a pointer to the xfarray pivot record within the sortinfo struct. */
605static inline void *xfarray_sortinfo_pivot(struct xfarray_sortinfo *si)
606{
607 return xfarray_sortinfo_hi(si) + si->max_stack_depth;
608}
609
610/* Return a pointer to the start of the pivot array. */
611static inline void *
612xfarray_sortinfo_pivot_array(
613 struct xfarray_sortinfo *si)
614{
615 return xfarray_sortinfo_pivot(si) + si->array->obj_size;
616}
617
618/* The xfarray record is stored at the start of each pivot array element. */
619static inline void *
620xfarray_pivot_array_rec(
621 void *pa,
622 size_t pa_recsz,
623 unsigned int pa_idx)
624{
625 return pa + (pa_recsz * pa_idx);
626}
627
628/* The xfarray index is stored at the end of each pivot array element. */
629static inline xfarray_idx_t *
630xfarray_pivot_array_idx(
631 void *pa,
632 size_t pa_recsz,
633 unsigned int pa_idx)
634{
635 return xfarray_pivot_array_rec(pa, pa_recsz, pa_idx + 1) -
636 sizeof(xfarray_idx_t);
637}
638
639/*
640 * Find a pivot value for quicksort partitioning, swap it with a[lo], and save
641 * the cached pivot record for the next step.
642 *
643 * Load evenly-spaced records within the given range into memory, sort them,
644 * and choose the pivot from the median record. Using multiple points will
645 * improve the quality of the pivot selection, and hopefully avoid the worst
646 * quicksort behavior, since our array values are nearly always evenly sorted.
647 */
648STATIC int
649xfarray_qsort_pivot(
650 struct xfarray_sortinfo *si,
651 xfarray_idx_t lo,
652 xfarray_idx_t hi)
653{
654 void *pivot = xfarray_sortinfo_pivot(si);
655 void *parray = xfarray_sortinfo_pivot_array(si);
656 void *recp;
657 xfarray_idx_t *idxp;
658 xfarray_idx_t step = (hi - lo) / (XFARRAY_QSORT_PIVOT_NR - 1);
659 size_t pivot_rec_sz = xfarray_pivot_rec_sz(si->array);
660 int i, j;
661 int error;
662
663 ASSERT(step > 0);
664
665 /*
666 * Load the xfarray indexes of the records we intend to sample into the
667 * pivot array.
668 */
669 idxp = xfarray_pivot_array_idx(parray, pivot_rec_sz, 0);
670 *idxp = lo;
671 for (i = 1; i < XFARRAY_QSORT_PIVOT_NR - 1; i++) {
672 idxp = xfarray_pivot_array_idx(parray, pivot_rec_sz, i);
673 *idxp = lo + (i * step);
674 }
675 idxp = xfarray_pivot_array_idx(parray, pivot_rec_sz,
676 XFARRAY_QSORT_PIVOT_NR - 1);
677 *idxp = hi;
678
679 /* Load the selected xfarray records into the pivot array. */
680 for (i = 0; i < XFARRAY_QSORT_PIVOT_NR; i++) {
681 xfarray_idx_t idx;
682
683 recp = xfarray_pivot_array_rec(parray, pivot_rec_sz, i);
684 idxp = xfarray_pivot_array_idx(parray, pivot_rec_sz, i);
685
686 /* No unset records; load directly into the array. */
687 if (likely(si->array->unset_slots == 0)) {
688 error = xfarray_sort_load(si, *idxp, recp);
689 if (error)
690 return error;
691 continue;
692 }
693
694 /*
695 * Load non-null records into the scratchpad without changing
696 * the xfarray_idx_t in the pivot array.
697 */
698 idx = *idxp;
699 xfarray_sort_bump_loads(si);
700 error = xfarray_load_next(si->array, &idx, recp);
701 if (error)
702 return error;
703 }
704
705 xfarray_sort_bump_heapsorts(si);
706 sort(parray, XFARRAY_QSORT_PIVOT_NR, pivot_rec_sz, si->cmp_fn, NULL);
707
708 /*
709 * We sorted the pivot array records (which includes the xfarray
710 * indices) in xfarray record order. The median element of the pivot
711 * array contains the xfarray record that we will use as the pivot.
712 * Copy that xfarray record to the designated space.
713 */
714 recp = xfarray_pivot_array_rec(parray, pivot_rec_sz,
715 XFARRAY_QSORT_PIVOT_NR / 2);
716 memcpy(pivot, recp, si->array->obj_size);
717
718 /* If the pivot record we chose was already in a[lo] then we're done. */
719 idxp = xfarray_pivot_array_idx(parray, pivot_rec_sz,
720 XFARRAY_QSORT_PIVOT_NR / 2);
721 if (*idxp == lo)
722 return 0;
723
724 /*
725 * Find the cached copy of a[lo] in the pivot array so that we can swap
726 * a[lo] and a[pivot].
727 */
728 for (i = 0, j = -1; i < XFARRAY_QSORT_PIVOT_NR; i++) {
729 idxp = xfarray_pivot_array_idx(parray, pivot_rec_sz, i);
730 if (*idxp == lo)
731 j = i;
732 }
733 if (j < 0) {
734 ASSERT(j >= 0);
735 return -EFSCORRUPTED;
736 }
737
738 /* Swap a[lo] and a[pivot]. */
739 error = xfarray_sort_store(si, lo, pivot);
740 if (error)
741 return error;
742
743 recp = xfarray_pivot_array_rec(parray, pivot_rec_sz, j);
744 idxp = xfarray_pivot_array_idx(parray, pivot_rec_sz,
745 XFARRAY_QSORT_PIVOT_NR / 2);
746 return xfarray_sort_store(si, *idxp, recp);
747}
748
749/*
750 * Set up the pointers for the next iteration. We push onto the stack all of
751 * the unsorted values between a[lo + 1] and a[end[i]], and we tweak the
752 * current stack frame to point to the unsorted values between a[beg[i]] and
753 * a[lo] so that those values will be sorted when we pop the stack.
754 */
755static inline int
756xfarray_qsort_push(
757 struct xfarray_sortinfo *si,
758 xfarray_idx_t *si_lo,
759 xfarray_idx_t *si_hi,
760 xfarray_idx_t lo,
761 xfarray_idx_t hi)
762{
763 /* Check for stack overflows */
764 if (si->stack_depth >= si->max_stack_depth - 1) {
765 ASSERT(si->stack_depth < si->max_stack_depth - 1);
766 return -EFSCORRUPTED;
767 }
768
769 si->max_stack_used = max_t(uint8_t, si->max_stack_used,
770 si->stack_depth + 2);
771
772 si_lo[si->stack_depth + 1] = lo + 1;
773 si_hi[si->stack_depth + 1] = si_hi[si->stack_depth];
774 si_hi[si->stack_depth++] = lo - 1;
775
776 /*
777 * Always start with the smaller of the two partitions to keep the
778 * amount of recursion in check.
779 */
780 if (si_hi[si->stack_depth] - si_lo[si->stack_depth] >
781 si_hi[si->stack_depth - 1] - si_lo[si->stack_depth - 1]) {
782 swap(si_lo[si->stack_depth], si_lo[si->stack_depth - 1]);
783 swap(si_hi[si->stack_depth], si_hi[si->stack_depth - 1]);
784 }
785
786 return 0;
787}
788
789static inline void
790xfarray_sort_scan_done(
791 struct xfarray_sortinfo *si)
792{
793 if (si->folio)
794 xfile_put_folio(si->array->xfile, si->folio);
795 si->folio = NULL;
796}
797
798/*
799 * Cache the folio backing the start of the given array element. If the array
800 * element is contained entirely within the folio, return a pointer to the
801 * cached folio. Otherwise, load the element into the scratchpad and return a
802 * pointer to the scratchpad.
803 */
804static inline int
805xfarray_sort_scan(
806 struct xfarray_sortinfo *si,
807 xfarray_idx_t idx,
808 void **ptrp)
809{
810 loff_t idx_pos = xfarray_pos(si->array, idx);
811 int error = 0;
812
813 if (xfarray_sort_terminated(si, &error))
814 return error;
815
816 trace_xfarray_sort_scan(si, idx);
817
818 /* If the cached folio doesn't cover this index, release it. */
819 if (si->folio &&
820 (idx < si->first_folio_idx || idx > si->last_folio_idx))
821 xfarray_sort_scan_done(si);
822
823 /* Grab the first folio that backs this array element. */
824 if (!si->folio) {
825 struct folio *folio;
826 loff_t next_pos;
827
828 folio = xfile_get_folio(si->array->xfile, idx_pos,
829 si->array->obj_size, XFILE_ALLOC);
830 if (IS_ERR(folio))
831 return PTR_ERR(folio);
832 si->folio = folio;
833
834 si->first_folio_idx = xfarray_idx(si->array,
835 folio_pos(si->folio) + si->array->obj_size - 1);
836
837 next_pos = folio_next_pos(si->folio);
838 si->last_folio_idx = xfarray_idx(si->array, next_pos - 1);
839 if (xfarray_pos(si->array, si->last_folio_idx + 1) > next_pos)
840 si->last_folio_idx--;
841
842 trace_xfarray_sort_scan(si, idx);
843 }
844
845 /*
846 * If this folio still doesn't cover the desired element, it must cross
847 * a folio boundary. Read into the scratchpad and we're done.
848 */
849 if (idx < si->first_folio_idx || idx > si->last_folio_idx) {
850 void *temp = xfarray_scratch(array: si->array);
851
852 error = xfile_load(si->array->xfile, temp, si->array->obj_size,
853 idx_pos);
854 if (error)
855 return error;
856
857 *ptrp = temp;
858 return 0;
859 }
860
861 /* Otherwise return a pointer to the array element in the folio. */
862 *ptrp = folio_address(si->folio) + offset_in_folio(si->folio, idx_pos);
863 return 0;
864}
865
866/*
867 * Sort the array elements via quicksort. This implementation incorporates
868 * four optimizations discussed in Sedgewick:
869 *
870 * 1. Use an explicit stack of array indices to store the next array partition
871 * to sort. This helps us to avoid recursion in the call stack, which is
872 * particularly expensive in the kernel.
873 *
874 * 2. For arrays with records in arbitrary or user-controlled order, choose the
875 * pivot element using a median-of-nine decision tree. This reduces the
876 * probability of selecting a bad pivot value which causes worst case
877 * behavior (i.e. partition sizes of 1).
878 *
879 * 3. The smaller of the two sub-partitions is pushed onto the stack to start
880 * the next level of recursion, and the larger sub-partition replaces the
881 * current stack frame. This guarantees that we won't need more than
882 * log2(nr) stack space.
883 *
884 * 4. For small sets, load the records into the scratchpad and run heapsort on
885 * them because that is very fast. In the author's experience, this yields
886 * a ~10% reduction in runtime.
887 *
888 * If a small set is contained entirely within a single xfile memory page,
889 * map the page directly and run heap sort directly on the xfile page
890 * instead of using the load/store interface. This halves the runtime.
891 *
892 * 5. This optimization is specific to the implementation. When converging lo
893 * and hi after selecting a pivot, we will try to retain the xfile memory
894 * page between load calls, which reduces run time by 50%.
895 */
896
897/*
898 * Due to the use of signed indices, we can only support up to 2^63 records.
899 * Files can only grow to 2^63 bytes, so this is not much of a limitation.
900 */
901#define QSORT_MAX_RECS (1ULL << 63)
902
903int
904xfarray_sort(
905 struct xfarray *array,
906 xfarray_cmp_fn cmp_fn,
907 unsigned int flags)
908{
909 struct xfarray_sortinfo *si;
910 xfarray_idx_t *si_lo, *si_hi;
911 void *pivot;
912 void *scratch = xfarray_scratch(array);
913 xfarray_idx_t lo, hi;
914 int error = 0;
915
916 if (array->nr < 2)
917 return 0;
918 if (array->nr >= QSORT_MAX_RECS)
919 return -E2BIG;
920
921 error = xfarray_sortinfo_alloc(array, cmp_fn, flags, &si);
922 if (error)
923 return error;
924 si_lo = xfarray_sortinfo_lo(si);
925 si_hi = xfarray_sortinfo_hi(si);
926 pivot = xfarray_sortinfo_pivot(si);
927
928 while (si->stack_depth >= 0) {
929 int ret;
930
931 lo = si_lo[si->stack_depth];
932 hi = si_hi[si->stack_depth];
933
934 trace_xfarray_qsort(si, lo, hi);
935
936 /* Nothing left in this partition to sort; pop stack. */
937 if (lo >= hi) {
938 si->stack_depth--;
939 continue;
940 }
941
942 /*
943 * If directly mapping the folio and sorting can solve our
944 * problems, we're done.
945 */
946 ret = xfarray_foliosort(si, lo, hi);
947 if (ret < 0)
948 goto out_free;
949 if (ret == 1) {
950 si->stack_depth--;
951 continue;
952 }
953
954 /* If insertion sort can solve our problems, we're done. */
955 if (xfarray_want_isort(si, lo, hi)) {
956 error = xfarray_isort(si, lo, hi);
957 if (error)
958 goto out_free;
959 si->stack_depth--;
960 continue;
961 }
962
963 /* Pick a pivot, move it to a[lo] and stash it. */
964 error = xfarray_qsort_pivot(si, lo, hi);
965 if (error)
966 goto out_free;
967
968 /*
969 * Rearrange a[lo..hi] such that everything smaller than the
970 * pivot is on the left side of the range and everything larger
971 * than the pivot is on the right side of the range.
972 */
973 while (lo < hi) {
974 void *p;
975
976 /*
977 * Decrement hi until it finds an a[hi] less than the
978 * pivot value.
979 */
980 error = xfarray_sort_scan(si, hi, &p);
981 if (error)
982 goto out_free;
983 while (xfarray_sort_cmp(si, p, pivot) >= 0 && lo < hi) {
984 hi--;
985 error = xfarray_sort_scan(si, hi, &p);
986 if (error)
987 goto out_free;
988 }
989 if (p != scratch)
990 memcpy(scratch, p, si->array->obj_size);
991 xfarray_sort_scan_done(si);
992 if (xfarray_sort_terminated(si, &error))
993 goto out_free;
994
995 /* Copy that item (a[hi]) to a[lo]. */
996 if (lo < hi) {
997 error = xfarray_sort_store(si, lo++, scratch);
998 if (error)
999 goto out_free;
1000 }
1001
1002 /*
1003 * Increment lo until it finds an a[lo] greater than
1004 * the pivot value.
1005 */
1006 error = xfarray_sort_scan(si, lo, &p);
1007 if (error)
1008 goto out_free;
1009 while (xfarray_sort_cmp(si, p, pivot) <= 0 && lo < hi) {
1010 lo++;
1011 error = xfarray_sort_scan(si, lo, &p);
1012 if (error)
1013 goto out_free;
1014 }
1015 if (p != scratch)
1016 memcpy(scratch, p, si->array->obj_size);
1017 xfarray_sort_scan_done(si);
1018 if (xfarray_sort_terminated(si, &error))
1019 goto out_free;
1020
1021 /* Copy that item (a[lo]) to a[hi]. */
1022 if (lo < hi) {
1023 error = xfarray_sort_store(si, hi--, scratch);
1024 if (error)
1025 goto out_free;
1026 }
1027
1028 if (xfarray_sort_terminated(si, &error))
1029 goto out_free;
1030 }
1031
1032 /*
1033 * Put our pivot value in the correct place at a[lo]. All
1034 * values between a[beg[i]] and a[lo - 1] should be less than
1035 * the pivot; and all values between a[lo + 1] and a[end[i]-1]
1036 * should be greater than the pivot.
1037 */
1038 error = xfarray_sort_store(si, lo, pivot);
1039 if (error)
1040 goto out_free;
1041
1042 /* Set up the stack frame to process the two partitions. */
1043 error = xfarray_qsort_push(si, si_lo, si_hi, lo, hi);
1044 if (error)
1045 goto out_free;
1046
1047 if (xfarray_sort_terminated(si, &error))
1048 goto out_free;
1049 }
1050
1051out_free:
1052 trace_xfarray_sort_stats(si, error);
1053 xfarray_sort_scan_done(si);
1054 kvfree(si);
1055 return error;
1056}
1057
1058/* How many bytes is this array consuming? */
1059unsigned long long
1060xfarray_bytes(
1061 struct xfarray *array)
1062{
1063 return xfile_bytes(array->xfile);
1064}
1065
1066/* Empty the entire array. */
1067void
1068xfarray_truncate(
1069 struct xfarray *array)
1070{
1071 xfile_discard(array->xfile, 0, MAX_LFS_FILESIZE);
1072 array->nr = 0;
1073}
1074

source code of linux/fs/xfs/scrub/xfarray.c