1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (c) 2001-2002 by David Brownell
4 */
5
6#ifndef __LINUX_USB_EHCI_DEF_H
7#define __LINUX_USB_EHCI_DEF_H
8
9#include <linux/usb/ehci-dbgp.h>
10
11/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
12
13/* Section 2.2 Host Controller Capability Registers */
14struct ehci_caps {
15 /* these fields are specified as 8 and 16 bit registers,
16 * but some hosts can't perform 8 or 16 bit PCI accesses.
17 * some hosts treat caplength and hciversion as parts of a 32-bit
18 * register, others treat them as two separate registers, this
19 * affects the memory map for big endian controllers.
20 */
21 u32 hc_capbase;
22#define HC_LENGTH(ehci, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
23 (ehci_big_endian_capbase(ehci) ? 24 : 0)))
24#define HC_VERSION(ehci, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
25 (ehci_big_endian_capbase(ehci) ? 0 : 16)))
26 u32 hcs_params; /* HCSPARAMS - offset 0x4 */
27#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
28#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
29#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
30#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
31#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
32#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
33#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
34#define HCS_N_PORTS_MAX 15 /* N_PORTS valid 0x1-0xF */
35
36 u32 hcc_params; /* HCCPARAMS - offset 0x8 */
37/* EHCI 1.1 addendum */
38#define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19))
39#define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18))
40#define HCC_LPM(p) ((p)&(1 << 17))
41#define HCC_HW_PREFETCH(p) ((p)&(1 << 16))
42
43#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
44#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
45#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
46#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
47#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
48#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
49 u8 portroute[8]; /* nibbles for routing - offset 0xC */
50};
51
52
53/* Section 2.3 Host Controller Operational Registers */
54struct ehci_regs {
55
56 /* USBCMD: offset 0x00 */
57 u32 command;
58
59/* EHCI 1.1 addendum */
60#define CMD_HIRD (0xf<<24) /* host initiated resume duration */
61#define CMD_PPCEE (1<<15) /* per port change event enable */
62#define CMD_FSP (1<<14) /* fully synchronized prefetch */
63#define CMD_ASPE (1<<13) /* async schedule prefetch enable */
64#define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */
65/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
66#define CMD_PARK (1<<11) /* enable "park" on async qh */
67#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
68#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
69#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
70#define CMD_ASE (1<<5) /* async schedule enable */
71#define CMD_PSE (1<<4) /* periodic schedule enable */
72/* 3:2 is periodic frame list size */
73#define CMD_RESET (1<<1) /* reset HC not bus */
74#define CMD_RUN (1<<0) /* start/stop HC */
75
76 /* USBSTS: offset 0x04 */
77 u32 status;
78#define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */
79#define STS_ASS (1<<15) /* Async Schedule Status */
80#define STS_PSS (1<<14) /* Periodic Schedule Status */
81#define STS_RECL (1<<13) /* Reclamation */
82#define STS_HALT (1<<12) /* Not running (any reason) */
83/* some bits reserved */
84 /* these STS_* flags are also intr_enable bits (USBINTR) */
85#define STS_IAA (1<<5) /* Interrupted on async advance */
86#define STS_FATAL (1<<4) /* such as some PCI access errors */
87#define STS_FLR (1<<3) /* frame list rolled over */
88#define STS_PCD (1<<2) /* port change detect */
89#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
90#define STS_INT (1<<0) /* "normal" completion (short, ...) */
91
92 /* USBINTR: offset 0x08 */
93 u32 intr_enable;
94
95 /* FRINDEX: offset 0x0C */
96 u32 frame_index; /* current microframe number */
97 /* CTRLDSSEGMENT: offset 0x10 */
98 u32 segment; /* address bits 63:32 if needed */
99 /* PERIODICLISTBASE: offset 0x14 */
100 u32 frame_list; /* points to periodic list */
101 /* ASYNCLISTADDR: offset 0x18 */
102 u32 async_next; /* address of next async queue head */
103
104 u32 reserved1[2];
105
106 /* TXFILLTUNING: offset 0x24 */
107 u32 txfill_tuning; /* TX FIFO Tuning register */
108#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */
109
110 u32 reserved2[6];
111
112 /* CONFIGFLAG: offset 0x40 */
113 u32 configured_flag;
114#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
115
116 union {
117 /* PORTSC: offset 0x44 */
118 u32 port_status[HCS_N_PORTS_MAX]; /* up to N_PORTS */
119/* EHCI 1.1 addendum */
120#define PORTSC_SUSPEND_STS_ACK 0
121#define PORTSC_SUSPEND_STS_NYET 1
122#define PORTSC_SUSPEND_STS_STALL 2
123#define PORTSC_SUSPEND_STS_ERR 3
124
125#define PORT_DEV_ADDR (0x7f<<25) /* device address */
126#define PORT_SSTS (0x3<<23) /* suspend status */
127/* 31:23 reserved */
128#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
129#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
130#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
131/* 19:16 for port testing */
132#define PORT_TEST(x) (((x)&0xf)<<16) /* Port Test Control */
133#define PORT_TEST_PKT PORT_TEST(0x4) /* Port Test Control - packet test */
134#define PORT_TEST_FORCE PORT_TEST(0x5) /* Port Test Control - force enable */
135#define PORT_LED_OFF (0<<14)
136#define PORT_LED_AMBER (1<<14)
137#define PORT_LED_GREEN (2<<14)
138#define PORT_LED_MASK (3<<14)
139#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
140#define PORT_POWER (1<<12) /* true: has power (see PPC) */
141#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
142#define PORT_LS_MASK (3<<10) /* Link status (SE0, K or J */
143/* 9 reserved */
144#define PORT_LPM (1<<9) /* LPM transaction */
145#define PORT_RESET (1<<8) /* reset port */
146#define PORT_SUSPEND (1<<7) /* suspend port */
147#define PORT_RESUME (1<<6) /* resume it */
148#define PORT_OCC (1<<5) /* over current change */
149#define PORT_OC (1<<4) /* over current active */
150#define PORT_PEC (1<<3) /* port enable change */
151#define PORT_PE (1<<2) /* port enable */
152#define PORT_CSC (1<<1) /* connect status change */
153#define PORT_CONNECT (1<<0) /* device connected */
154#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
155 struct {
156 u32 reserved3[9];
157 /* USBMODE: offset 0x68 */
158 u32 usbmode; /* USB Device mode */
159 };
160#define USBMODE_SDIS (1<<3) /* Stream disable */
161#define USBMODE_BE (1<<2) /* BE/LE endianness select */
162#define USBMODE_CM_HC (3<<0) /* host controller mode */
163#define USBMODE_CM_IDLE (0<<0) /* idle state */
164 };
165
166/* Moorestown has some non-standard registers, partially due to the fact that
167 * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
168 * PORTSCx
169 */
170 union {
171 struct {
172 u32 reserved4;
173 /* HOSTPC: offset 0x84 */
174 u32 hostpc[HCS_N_PORTS_MAX];
175#define HOSTPC_PHCD (1<<22) /* Phy clock disable */
176#define HOSTPC_PSPD (3<<25) /* Port speed detection */
177 };
178
179 /* Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x80 */
180 u32 brcm_insnreg[4];
181 };
182
183 u32 reserved5[2];
184
185 /* USBMODE_EX: offset 0xc8 */
186 u32 usbmode_ex; /* USB Device mode extension */
187#define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */
188#define USBMODE_EX_HC (3<<0) /* host controller mode */
189};
190
191#endif /* __LINUX_USB_EHCI_DEF_H */
192

source code of linux/include/linux/usb/ehci_def.h