| 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | #ifndef __LINUX_USB_STORAGE_H |
| 3 | #define __LINUX_USB_STORAGE_H |
| 4 | |
| 5 | /* |
| 6 | * linux/usb/storage.h |
| 7 | * |
| 8 | * Copyright Matthew Wilcox for Intel Corp, 2010 |
| 9 | * |
| 10 | * This file contains definitions taken from the |
| 11 | * USB Mass Storage Class Specification Overview |
| 12 | */ |
| 13 | |
| 14 | /* Storage subclass codes */ |
| 15 | |
| 16 | #define USB_SC_RBC 0x01 /* Typically, flash devices */ |
| 17 | #define USB_SC_8020 0x02 /* CD-ROM */ |
| 18 | #define USB_SC_QIC 0x03 /* QIC-157 Tapes */ |
| 19 | #define USB_SC_UFI 0x04 /* Floppy */ |
| 20 | #define USB_SC_8070 0x05 /* Removable media */ |
| 21 | #define USB_SC_SCSI 0x06 /* Transparent */ |
| 22 | #define USB_SC_LOCKABLE 0x07 /* Password-protected */ |
| 23 | |
| 24 | #define USB_SC_ISD200 0xf0 /* ISD200 ATA */ |
| 25 | #define USB_SC_CYP_ATACB 0xf1 /* Cypress ATACB */ |
| 26 | #define USB_SC_DEVICE 0xff /* Use device's value */ |
| 27 | |
| 28 | /* Storage protocol codes */ |
| 29 | |
| 30 | #define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */ |
| 31 | #define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */ |
| 32 | #define USB_PR_BULK 0x50 /* bulk only */ |
| 33 | #define USB_PR_UAS 0x62 /* USB Attached SCSI */ |
| 34 | |
| 35 | #define USB_PR_USBAT 0x80 /* SCM-ATAPI bridge */ |
| 36 | #define USB_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ |
| 37 | #define USB_PR_SDDR55 0x82 /* SDDR-55 (made up) */ |
| 38 | #define USB_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ |
| 39 | #define USB_PR_FREECOM 0xf1 /* Freecom */ |
| 40 | #define USB_PR_DATAFAB 0xf2 /* Datafab chipsets */ |
| 41 | #define USB_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ |
| 42 | #define USB_PR_ALAUDA 0xf4 /* Alauda chipsets */ |
| 43 | #define USB_PR_KARMA 0xf5 /* Rio Karma */ |
| 44 | |
| 45 | #define USB_PR_DEVICE 0xff /* Use device's value */ |
| 46 | |
| 47 | /* |
| 48 | * Bulk only data structures |
| 49 | */ |
| 50 | |
| 51 | /* command block wrapper */ |
| 52 | struct bulk_cb_wrap { |
| 53 | __le32 Signature; /* contains 'USBC' */ |
| 54 | __u32 Tag; /* unique per command id */ |
| 55 | __le32 DataTransferLength; /* size of data */ |
| 56 | __u8 Flags; /* direction in bit 7 */ |
| 57 | __u8 Lun; /* LUN normally 0 */ |
| 58 | __u8 Length; /* length of the CDB */ |
| 59 | __u8 CDB[16]; /* max command */ |
| 60 | }; |
| 61 | |
| 62 | #define US_BULK_CB_WRAP_LEN 31 |
| 63 | #define US_BULK_CB_SIGN 0x43425355 /* spells out 'USBC' */ |
| 64 | #define US_BULK_FLAG_IN (1 << 7) |
| 65 | #define US_BULK_FLAG_OUT 0 |
| 66 | |
| 67 | /* command status wrapper */ |
| 68 | struct bulk_cs_wrap { |
| 69 | __le32 Signature; /* contains 'USBS' */ |
| 70 | __u32 Tag; /* same as original command */ |
| 71 | __le32 Residue; /* amount not transferred */ |
| 72 | __u8 Status; /* see below */ |
| 73 | }; |
| 74 | |
| 75 | #define US_BULK_CS_WRAP_LEN 13 |
| 76 | #define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */ |
| 77 | #define US_BULK_STAT_OK 0 |
| 78 | #define US_BULK_STAT_FAIL 1 |
| 79 | #define US_BULK_STAT_PHASE 2 |
| 80 | |
| 81 | /* bulk-only class specific requests */ |
| 82 | #define US_BULK_RESET_REQUEST 0xff |
| 83 | #define US_BULK_GET_MAX_LUN 0xfe |
| 84 | |
| 85 | /* |
| 86 | * If 4 LUNs are supported then the LUNs would be |
| 87 | * numbered from 0 to 3, and the return value for |
| 88 | * US_BULK_GET_MAX_LUN request would be 3. The valid |
| 89 | * LUN field is 4 bits wide, the upper limit is 0x0f. |
| 90 | */ |
| 91 | #define US_BULK_MAX_LUN_LIMIT 0x0f |
| 92 | |
| 93 | #endif |
| 94 | |