1/* Structures and definitions for magnetic tape I/O control commands.
2 Copyright (C) 1996-2022 Free Software Foundation, Inc.
3 This file is part of the GNU C Library.
4
5 The GNU C Library is free software; you can redistribute it and/or
6 modify it under the terms of the GNU Lesser General Public
7 License as published by the Free Software Foundation; either
8 version 2.1 of the License, or (at your option) any later version.
9
10 The GNU C Library is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 Lesser General Public License for more details.
14
15 You should have received a copy of the GNU Lesser General Public
16 License along with the GNU C Library; if not, see
17 <https://www.gnu.org/licenses/>. */
18
19
20#ifndef _SYS_MTIO_H
21#define _SYS_MTIO_H 1
22
23/* Get necessary definitions from system and kernel headers. */
24#include <sys/types.h>
25#include <sys/ioctl.h>
26
27
28/* Structure for MTIOCTOP - magnetic tape operation command. */
29struct mtop
30 {
31 short int mt_op; /* Operations defined below. */
32 int mt_count; /* How many of them. */
33 };
34#define _IOT_mtop /* Hurd ioctl type field. */ \
35 _IOT (_IOTS (short), 1, _IOTS (int), 1, 0, 0)
36
37/* Magnetic Tape operations [Not all operations supported by all drivers]. */
38#define MTRESET 0 /* +reset drive in case of problems. */
39#define MTFSF 1 /* Forward space over FileMark,
40 * position at first record of next file. */
41#define MTBSF 2 /* Backward space FileMark (position before FM). */
42#define MTFSR 3 /* Forward space record. */
43#define MTBSR 4 /* Backward space record. */
44#define MTWEOF 5 /* Write an end-of-file record (mark). */
45#define MTREW 6 /* Rewind. */
46#define MTOFFL 7 /* Rewind and put the drive offline (eject?). */
47#define MTNOP 8 /* No op, set status only (read with MTIOCGET). */
48#define MTRETEN 9 /* Retension tape. */
49#define MTBSFM 10 /* +backward space FileMark, position at FM. */
50#define MTFSFM 11 /* +forward space FileMark, position at FM. */
51#define MTEOM 12 /* Goto end of recorded media (for appending files).
52 MTEOM positions after the last FM, ready for
53 appending another file. */
54#define MTERASE 13 /* Erase tape -- be careful! */
55
56#define MTRAS1 14 /* Run self test 1 (nondestructive). */
57#define MTRAS2 15 /* Run self test 2 (destructive). */
58#define MTRAS3 16 /* Reserved for self test 3. */
59
60#define MTSETBLK 20 /* Set block length (SCSI). */
61#define MTSETDENSITY 21 /* Set tape density (SCSI). */
62#define MTSEEK 22 /* Seek to block (Tandberg, etc.). */
63#define MTTELL 23 /* Tell block (Tandberg, etc.). */
64#define MTSETDRVBUFFER 24 /* Set the drive buffering according to SCSI-2.
65 Ordinary buffered operation with code 1. */
66#define MTFSS 25 /* Space forward over setmarks. */
67#define MTBSS 26 /* Space backward over setmarks. */
68#define MTWSM 27 /* Write setmarks. */
69
70#define MTLOCK 28 /* Lock the drive door. */
71#define MTUNLOCK 29 /* Unlock the drive door. */
72#define MTLOAD 30 /* Execute the SCSI load command. */
73#define MTUNLOAD 31 /* Execute the SCSI unload command. */
74#define MTCOMPRESSION 32/* Control compression with SCSI mode page 15. */
75#define MTSETPART 33 /* Change the active tape partition. */
76#define MTMKPART 34 /* Format the tape with one or two partitions. */
77
78/* structure for MTIOCGET - mag tape get status command */
79
80struct mtget
81 {
82 long int mt_type; /* Type of magtape device. */
83 long int mt_resid; /* Residual count: (not sure)
84 number of bytes ignored, or
85 number of files not skipped, or
86 number of records not skipped. */
87 /* The following registers are device dependent. */
88 long int mt_dsreg; /* Status register. */
89 long int mt_gstat; /* Generic (device independent) status. */
90 long int mt_erreg; /* Error register. */
91 /* The next two fields are not always used. */
92 __daddr_t mt_fileno; /* Number of current file on tape. */
93 __daddr_t mt_blkno; /* Current block number. */
94 };
95#define _IOT_mtget /* Hurd ioctl type field. */ \
96 _IOT (_IOTS (long), 7, 0, 0, 0, 0)
97
98
99/* Constants for mt_type. Not all of these are supported, and
100 these are not all of the ones that are supported. */
101#define MT_ISUNKNOWN 0x01
102#define MT_ISQIC02 0x02 /* Generic QIC-02 tape streamer. */
103#define MT_ISWT5150 0x03 /* Wangtek 5150EQ, QIC-150, QIC-02. */
104#define MT_ISARCHIVE_5945L2 0x04 /* Archive 5945L-2, QIC-24, QIC-02?. */
105#define MT_ISCMSJ500 0x05 /* CMS Jumbo 500 (QIC-02?). */
106#define MT_ISTDC3610 0x06 /* Tandberg 6310, QIC-24. */
107#define MT_ISARCHIVE_VP60I 0x07 /* Archive VP60i, QIC-02. */
108#define MT_ISARCHIVE_2150L 0x08 /* Archive Viper 2150L. */
109#define MT_ISARCHIVE_2060L 0x09 /* Archive Viper 2060L. */
110#define MT_ISARCHIVESC499 0x0A /* Archive SC-499 QIC-36 controller. */
111#define MT_ISQIC02_ALL_FEATURES 0x0F /* Generic QIC-02 with all features. */
112#define MT_ISWT5099EEN24 0x11 /* Wangtek 5099-een24, 60MB, QIC-24. */
113#define MT_ISTEAC_MT2ST 0x12 /* Teac MT-2ST 155mb drive,
114 Teac DC-1 card (Wangtek type). */
115#define MT_ISEVEREX_FT40A 0x32 /* Everex FT40A (QIC-40). */
116#define MT_ISDDS1 0x51 /* DDS device without partitions. */
117#define MT_ISDDS2 0x52 /* DDS device with partitions. */
118#define MT_ISSCSI1 0x71 /* Generic ANSI SCSI-1 tape unit. */
119#define MT_ISSCSI2 0x72 /* Generic ANSI SCSI-2 tape unit. */
120
121/* QIC-40/80/3010/3020 ftape supported drives.
122 20bit vendor ID + 0x800000 (see vendors.h in ftape distribution). */
123#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */
124#define MT_ISFTAPE_FLAG 0x800000
125
126struct mt_tape_info
127 {
128 long int t_type; /* Device type id (mt_type). */
129 char *t_name; /* Descriptive name. */
130 };
131
132#define MT_TAPE_INFO \
133 { \
134 {MT_ISUNKNOWN, "Unknown type of tape device"}, \
135 {MT_ISQIC02, "Generic QIC-02 tape streamer"}, \
136 {MT_ISWT5150, "Wangtek 5150, QIC-150"}, \
137 {MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \
138 {MT_ISCMSJ500, "CMS Jumbo 500"}, \
139 {MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \
140 {MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \
141 {MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \
142 {MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \
143 {MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \
144 {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \
145 {MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \
146 {MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \
147 {MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \
148 {MT_ISSCSI1, "Generic SCSI-1 tape"}, \
149 {MT_ISSCSI2, "Generic SCSI-2 tape"}, \
150 {0, NULL} \
151 }
152
153
154/* Structure for MTIOCPOS - mag tape get position command. */
155
156struct mtpos
157 {
158 long int mt_blkno; /* Current block number. */
159 };
160#define _IOT_mtpos /* Hurd ioctl type field. */ \
161 _IOT_SIMPLE (long)
162
163
164/* Structure for MTIOCGETCONFIG/MTIOCSETCONFIG primarily intended
165 as an interim solution for QIC-02 until DDI is fully implemented. */
166struct mtconfiginfo
167 {
168 long int mt_type; /* Drive type. */
169 long int ifc_type; /* Interface card type. */
170 unsigned short int irqnr; /* IRQ number to use. */
171 unsigned short int dmanr; /* DMA channel to use. */
172 unsigned short int port; /* IO port base address. */
173
174 unsigned long int debug; /* Debugging flags. */
175
176 unsigned have_dens:1;
177 unsigned have_bsf:1;
178 unsigned have_fsr:1;
179 unsigned have_bsr:1;
180 unsigned have_eod:1;
181 unsigned have_seek:1;
182 unsigned have_tell:1;
183 unsigned have_ras1:1;
184 unsigned have_ras2:1;
185 unsigned have_ras3:1;
186 unsigned have_qfa:1;
187
188 unsigned pad1:5;
189 char reserved[10];
190 };
191#define _IOT_mtconfiginfo /* Hurd ioctl type field. */ \
192 _IOT (_IOTS (long), 2, _IOTS (short), 3, _IOTS (long), 1) /* XXX wrong */
193
194
195/* Magnetic tape I/O control commands. */
196#define MTIOCTOP _IOW('m', 1, struct mtop) /* Do a mag tape op. */
197#define MTIOCGET _IOR('m', 2, struct mtget) /* Get tape status. */
198#define MTIOCPOS _IOR('m', 3, struct mtpos) /* Get tape position.*/
199
200/* The next two are used by the QIC-02 driver for runtime reconfiguration.
201 See tpqic02.h for struct mtconfiginfo. */
202#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* Get tape config.*/
203#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* Set tape config.*/
204
205/* Generic Mag Tape (device independent) status macros for examining
206 mt_gstat -- HP-UX compatible.
207 There is room for more generic status bits here, but I don't
208 know which of them are reserved. At least three or so should
209 be added to make this really useful. */
210#define GMT_EOF(x) ((x) & 0x80000000)
211#define GMT_BOT(x) ((x) & 0x40000000)
212#define GMT_EOT(x) ((x) & 0x20000000)
213#define GMT_SM(x) ((x) & 0x10000000) /* DDS setmark */
214#define GMT_EOD(x) ((x) & 0x08000000) /* DDS EOD */
215#define GMT_WR_PROT(x) ((x) & 0x04000000)
216/* #define GMT_ ? ((x) & 0x02000000) */
217#define GMT_ONLINE(x) ((x) & 0x01000000)
218#define GMT_D_6250(x) ((x) & 0x00800000)
219#define GMT_D_1600(x) ((x) & 0x00400000)
220#define GMT_D_800(x) ((x) & 0x00200000)
221/* #define GMT_ ? ((x) & 0x00100000) */
222/* #define GMT_ ? ((x) & 0x00080000) */
223#define GMT_DR_OPEN(x) ((x) & 0x00040000) /* Door open (no tape). */
224/* #define GMT_ ? ((x) & 0x00020000) */
225#define GMT_IM_REP_EN(x) ((x) & 0x00010000) /* Immediate report mode.*/
226/* 16 generic status bits unused. */
227
228
229/* SCSI-tape specific definitions. Bitfield shifts in the status */
230#define MT_ST_BLKSIZE_SHIFT 0
231#define MT_ST_BLKSIZE_MASK 0xffffff
232#define MT_ST_DENSITY_SHIFT 24
233#define MT_ST_DENSITY_MASK 0xff000000
234
235#define MT_ST_SOFTERR_SHIFT 0
236#define MT_ST_SOFTERR_MASK 0xffff
237
238/* Bitfields for the MTSETDRVBUFFER ioctl. */
239#define MT_ST_OPTIONS 0xf0000000
240#define MT_ST_BOOLEANS 0x10000000
241#define MT_ST_SETBOOLEANS 0x30000000
242#define MT_ST_CLEARBOOLEANS 0x40000000
243#define MT_ST_WRITE_THRESHOLD 0x20000000
244#define MT_ST_DEF_BLKSIZE 0x50000000
245#define MT_ST_DEF_OPTIONS 0x60000000
246
247#define MT_ST_BUFFER_WRITES 0x1
248#define MT_ST_ASYNC_WRITES 0x2
249#define MT_ST_READ_AHEAD 0x4
250#define MT_ST_DEBUGGING 0x8
251#define MT_ST_TWO_FM 0x10
252#define MT_ST_FAST_MTEOM 0x20
253#define MT_ST_AUTO_LOCK 0x40
254#define MT_ST_DEF_WRITES 0x80
255#define MT_ST_CAN_BSR 0x100
256#define MT_ST_NO_BLKLIMS 0x200
257#define MT_ST_CAN_PARTITIONS 0x400
258#define MT_ST_SCSI2LOGICAL 0x800
259
260/* The mode parameters to be controlled. Parameter chosen with bits 20-28. */
261#define MT_ST_CLEAR_DEFAULT 0xfffff
262#define MT_ST_DEF_DENSITY (MT_ST_DEF_OPTIONS | 0x100000)
263#define MT_ST_DEF_COMPRESSION (MT_ST_DEF_OPTIONS | 0x200000)
264#define MT_ST_DEF_DRVBUFFER (MT_ST_DEF_OPTIONS | 0x300000)
265
266/* The offset for the arguments for the special HP changer load command. */
267#define MT_ST_HPLOADER_OFFSET 10000
268
269
270/* Specify default tape device. */
271#ifndef DEFTAPE
272# define DEFTAPE "/dev/tape"
273#endif
274
275#endif /* mtio.h */
276

source code of include/x86_64-linux-gnu/sys/mtio.h