1/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
2/*
3 * linux/can/error.h
4 *
5 * Definitions of the CAN error messages to be filtered and passed to the user.
6 *
7 * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
8 * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. Neither the name of Volkswagen nor the names of its contributors
20 * may be used to endorse or promote products derived from this software
21 * without specific prior written permission.
22 *
23 * Alternatively, provided that this notice is retained in full, this
24 * software may be distributed under the terms of the GNU General
25 * Public License ("GPL") version 2, in which case the provisions of the
26 * GPL apply INSTEAD OF those given above.
27 *
28 * The provided data structures and external interfaces from this code
29 * are not restricted to be used by modules with a GPL compatible license.
30 *
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
36 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
37 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
41 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
42 * DAMAGE.
43 */
44
45#ifndef _CAN_ERROR_H
46#define _CAN_ERROR_H
47
48#define CAN_ERR_DLC 8 /* dlc for error message frames */
49
50/* error class (mask) in can_id */
51#define CAN_ERR_TX_TIMEOUT 0x00000001U /* TX timeout (by netdevice driver) */
52#define CAN_ERR_LOSTARB 0x00000002U /* lost arbitration / data[0] */
53#define CAN_ERR_CRTL 0x00000004U /* controller problems / data[1] */
54#define CAN_ERR_PROT 0x00000008U /* protocol violations / data[2..3] */
55#define CAN_ERR_TRX 0x00000010U /* transceiver status / data[4] */
56#define CAN_ERR_ACK 0x00000020U /* received no ACK on transmission */
57#define CAN_ERR_BUSOFF 0x00000040U /* bus off */
58#define CAN_ERR_BUSERROR 0x00000080U /* bus error (may flood!) */
59#define CAN_ERR_RESTARTED 0x00000100U /* controller restarted */
60
61/* arbitration lost in bit ... / data[0] */
62#define CAN_ERR_LOSTARB_UNSPEC 0x00 /* unspecified */
63 /* else bit number in bitstream */
64
65/* error status of CAN-controller / data[1] */
66#define CAN_ERR_CRTL_UNSPEC 0x00 /* unspecified */
67#define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
68#define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
69#define CAN_ERR_CRTL_RX_WARNING 0x04 /* reached warning level for RX errors */
70#define CAN_ERR_CRTL_TX_WARNING 0x08 /* reached warning level for TX errors */
71#define CAN_ERR_CRTL_RX_PASSIVE 0x10 /* reached error passive status RX */
72#define CAN_ERR_CRTL_TX_PASSIVE 0x20 /* reached error passive status TX */
73 /* (at least one error counter exceeds */
74 /* the protocol-defined level of 127) */
75#define CAN_ERR_CRTL_ACTIVE 0x40 /* recovered to error active state */
76
77/* error in CAN protocol (type) / data[2] */
78#define CAN_ERR_PROT_UNSPEC 0x00 /* unspecified */
79#define CAN_ERR_PROT_BIT 0x01 /* single bit error */
80#define CAN_ERR_PROT_FORM 0x02 /* frame format error */
81#define CAN_ERR_PROT_STUFF 0x04 /* bit stuffing error */
82#define CAN_ERR_PROT_BIT0 0x08 /* unable to send dominant bit */
83#define CAN_ERR_PROT_BIT1 0x10 /* unable to send recessive bit */
84#define CAN_ERR_PROT_OVERLOAD 0x20 /* bus overload */
85#define CAN_ERR_PROT_ACTIVE 0x40 /* active error announcement */
86#define CAN_ERR_PROT_TX 0x80 /* error occurred on transmission */
87
88/* error in CAN protocol (location) / data[3] */
89#define CAN_ERR_PROT_LOC_UNSPEC 0x00 /* unspecified */
90#define CAN_ERR_PROT_LOC_SOF 0x03 /* start of frame */
91#define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
92#define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
93#define CAN_ERR_PROT_LOC_SRTR 0x04 /* substitute RTR (SFF: RTR) */
94#define CAN_ERR_PROT_LOC_IDE 0x05 /* identifier extension */
95#define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
96#define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
97#define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
98#define CAN_ERR_PROT_LOC_RTR 0x0C /* RTR */
99#define CAN_ERR_PROT_LOC_RES1 0x0D /* reserved bit 1 */
100#define CAN_ERR_PROT_LOC_RES0 0x09 /* reserved bit 0 */
101#define CAN_ERR_PROT_LOC_DLC 0x0B /* data length code */
102#define CAN_ERR_PROT_LOC_DATA 0x0A /* data section */
103#define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
104#define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
105#define CAN_ERR_PROT_LOC_ACK 0x19 /* ACK slot */
106#define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
107#define CAN_ERR_PROT_LOC_EOF 0x1A /* end of frame */
108#define CAN_ERR_PROT_LOC_INTERM 0x12 /* intermission */
109
110/* error status of CAN-transceiver / data[4] */
111/* CANH CANL */
112#define CAN_ERR_TRX_UNSPEC 0x00 /* 0000 0000 */
113#define CAN_ERR_TRX_CANH_NO_WIRE 0x04 /* 0000 0100 */
114#define CAN_ERR_TRX_CANH_SHORT_TO_BAT 0x05 /* 0000 0101 */
115#define CAN_ERR_TRX_CANH_SHORT_TO_VCC 0x06 /* 0000 0110 */
116#define CAN_ERR_TRX_CANH_SHORT_TO_GND 0x07 /* 0000 0111 */
117#define CAN_ERR_TRX_CANL_NO_WIRE 0x40 /* 0100 0000 */
118#define CAN_ERR_TRX_CANL_SHORT_TO_BAT 0x50 /* 0101 0000 */
119#define CAN_ERR_TRX_CANL_SHORT_TO_VCC 0x60 /* 0110 0000 */
120#define CAN_ERR_TRX_CANL_SHORT_TO_GND 0x70 /* 0111 0000 */
121#define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
122
123/* data[5] is reserved (do not use) */
124
125/* TX error counter / data[6] */
126/* RX error counter / data[7] */
127
128#endif /* _CAN_ERROR_H */
129

source code of include/linux/can/error.h