1 | /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ |
2 | /* |
3 | * INET An implementation of the TCP/IP protocol suite for the LINUX |
4 | * operating system. INET is implemented using the BSD Socket |
5 | * interface as the means of communication with the user level. |
6 | * |
7 | * Global definitions for the ARP (RFC 826) protocol. |
8 | * |
9 | * Version: @(#)if_arp.h 1.0.1 04/16/93 |
10 | * |
11 | * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988 |
12 | * Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source. |
13 | * Ross Biro |
14 | * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> |
15 | * Florian La Roche, |
16 | * Jonathan Layes <layes@loran.com> |
17 | * Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25 |
18 | * |
19 | * This program is free software; you can redistribute it and/or |
20 | * modify it under the terms of the GNU General Public License |
21 | * as published by the Free Software Foundation; either version |
22 | * 2 of the License, or (at your option) any later version. |
23 | */ |
24 | #ifndef _LINUX_IF_ARP_H |
25 | #define _LINUX_IF_ARP_H |
26 | |
27 | #include <linux/netdevice.h> |
28 | |
29 | /* ARP protocol HARDWARE identifiers. */ |
30 | #define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */ |
31 | #define ARPHRD_ETHER 1 /* Ethernet 10Mbps */ |
32 | #define ARPHRD_EETHER 2 /* Experimental Ethernet */ |
33 | #define ARPHRD_AX25 3 /* AX.25 Level 2 */ |
34 | #define ARPHRD_PRONET 4 /* PROnet token ring */ |
35 | #define ARPHRD_CHAOS 5 /* Chaosnet */ |
36 | #define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */ |
37 | #define ARPHRD_ARCNET 7 /* ARCnet */ |
38 | #define ARPHRD_APPLETLK 8 /* APPLEtalk */ |
39 | #define ARPHRD_DLCI 15 /* Frame Relay DLCI */ |
40 | #define ARPHRD_ATM 19 /* ATM */ |
41 | #define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */ |
42 | #define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */ |
43 | #define ARPHRD_EUI64 27 /* EUI-64 */ |
44 | #define ARPHRD_INFINIBAND 32 /* InfiniBand */ |
45 | |
46 | /* Dummy types for non ARP hardware */ |
47 | #define ARPHRD_SLIP 256 |
48 | #define ARPHRD_CSLIP 257 |
49 | #define ARPHRD_SLIP6 258 |
50 | #define ARPHRD_CSLIP6 259 |
51 | #define ARPHRD_RSRVD 260 /* Notional KISS type */ |
52 | #define ARPHRD_ADAPT 264 |
53 | #define ARPHRD_ROSE 270 |
54 | #define ARPHRD_X25 271 /* CCITT X.25 */ |
55 | #define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */ |
56 | #define ARPHRD_CAN 280 /* Controller Area Network */ |
57 | #define ARPHRD_MCTP 290 |
58 | #define ARPHRD_PPP 512 |
59 | #define ARPHRD_CISCO 513 /* Cisco HDLC */ |
60 | #define ARPHRD_HDLC ARPHRD_CISCO |
61 | #define ARPHRD_LAPB 516 /* LAPB */ |
62 | #define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */ |
63 | #define ARPHRD_RAWHDLC 518 /* Raw HDLC */ |
64 | #define ARPHRD_RAWIP 519 /* Raw IP */ |
65 | |
66 | #define ARPHRD_TUNNEL 768 /* IPIP tunnel */ |
67 | #define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */ |
68 | #define ARPHRD_FRAD 770 /* Frame Relay Access Device */ |
69 | #define ARPHRD_SKIP 771 /* SKIP vif */ |
70 | #define ARPHRD_LOOPBACK 772 /* Loopback device */ |
71 | #define ARPHRD_LOCALTLK 773 /* Localtalk device */ |
72 | #define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */ |
73 | #define ARPHRD_BIF 775 /* AP1000 BIF */ |
74 | #define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */ |
75 | #define ARPHRD_IPDDP 777 /* IP over DDP tunneller */ |
76 | #define ARPHRD_IPGRE 778 /* GRE over IP */ |
77 | #define ARPHRD_PIMREG 779 /* PIMSM register interface */ |
78 | #define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */ |
79 | #define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */ |
80 | #define ARPHRD_ECONET 782 /* Acorn Econet */ |
81 | #define ARPHRD_IRDA 783 /* Linux-IrDA */ |
82 | /* ARP works differently on different FC media .. so */ |
83 | #define ARPHRD_FCPP 784 /* Point to point fibrechannel */ |
84 | #define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */ |
85 | #define ARPHRD_FCPL 786 /* Fibrechannel public loop */ |
86 | #define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */ |
87 | /* 787->799 reserved for fibrechannel media types */ |
88 | #define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */ |
89 | #define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ |
90 | #define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ |
91 | #define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ |
92 | #define ARPHRD_IEEE802154 804 |
93 | #define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */ |
94 | |
95 | #define ARPHRD_PHONET 820 /* PhoNet media type */ |
96 | #define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ |
97 | #define ARPHRD_CAIF 822 /* CAIF media type */ |
98 | #define ARPHRD_IP6GRE 823 /* GRE over IPv6 */ |
99 | #define ARPHRD_NETLINK 824 /* Netlink header */ |
100 | #define ARPHRD_6LOWPAN 825 /* IPv6 over LoWPAN */ |
101 | #define ARPHRD_VSOCKMON 826 /* Vsock monitor header */ |
102 | |
103 | #define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ |
104 | #define ARPHRD_NONE 0xFFFE /* zero header length */ |
105 | |
106 | /* ARP protocol opcodes. */ |
107 | #define ARPOP_REQUEST 1 /* ARP request */ |
108 | #define ARPOP_REPLY 2 /* ARP reply */ |
109 | #define ARPOP_RREQUEST 3 /* RARP request */ |
110 | #define ARPOP_RREPLY 4 /* RARP reply */ |
111 | #define ARPOP_InREQUEST 8 /* InARP request */ |
112 | #define ARPOP_InREPLY 9 /* InARP reply */ |
113 | #define ARPOP_NAK 10 /* (ATM)ARP NAK */ |
114 | |
115 | |
116 | /* ARP ioctl request. */ |
117 | struct arpreq { |
118 | struct sockaddr arp_pa; /* protocol address */ |
119 | struct sockaddr arp_ha; /* hardware address */ |
120 | int arp_flags; /* flags */ |
121 | struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ |
122 | char arp_dev[IFNAMSIZ]; |
123 | }; |
124 | |
125 | struct arpreq_old { |
126 | struct sockaddr arp_pa; /* protocol address */ |
127 | struct sockaddr arp_ha; /* hardware address */ |
128 | int arp_flags; /* flags */ |
129 | struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ |
130 | }; |
131 | |
132 | /* ARP Flag values. */ |
133 | #define ATF_COM 0x02 /* completed entry (ha valid) */ |
134 | #define ATF_PERM 0x04 /* permanent entry */ |
135 | #define ATF_PUBL 0x08 /* publish entry */ |
136 | #define ATF_USETRAILERS 0x10 /* has requested trailers */ |
137 | #define ATF_NETMASK 0x20 /* want to use a netmask (only |
138 | for proxy entries) */ |
139 | #define ATF_DONTPUB 0x40 /* don't answer this addresses */ |
140 | |
141 | /* |
142 | * This structure defines an ethernet arp header. |
143 | */ |
144 | |
145 | struct arphdr { |
146 | __be16 ar_hrd; /* format of hardware address */ |
147 | __be16 ar_pro; /* format of protocol address */ |
148 | unsigned char ar_hln; /* length of hardware address */ |
149 | unsigned char ar_pln; /* length of protocol address */ |
150 | __be16 ar_op; /* ARP opcode (command) */ |
151 | |
152 | #if 0 |
153 | /* |
154 | * Ethernet looks like this : This bit is variable sized however... |
155 | */ |
156 | unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */ |
157 | unsigned char ar_sip[4]; /* sender IP address */ |
158 | unsigned char ar_tha[ETH_ALEN]; /* target hardware address */ |
159 | unsigned char ar_tip[4]; /* target IP address */ |
160 | #endif |
161 | |
162 | }; |
163 | |
164 | |
165 | #endif /* _LINUX_IF_ARP_H */ |
166 | |