1 | /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ |
2 | /* |
3 | * INET An implementation of the TCP/IP protocol suite for the LINUX |
4 | * operating system. INET is implemented using the BSD Socket |
5 | * interface as the means of communication with the user level. |
6 | * |
7 | * Definitions of the socket-level I/O control calls. |
8 | * |
9 | * Version: @(#)sockios.h 1.0.2 03/09/93 |
10 | * |
11 | * Authors: Ross Biro |
12 | * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> |
13 | * |
14 | * This program is free software; you can redistribute it and/or |
15 | * modify it under the terms of the GNU General Public License |
16 | * as published by the Free Software Foundation; either version |
17 | * 2 of the License, or (at your option) any later version. |
18 | */ |
19 | #ifndef _LINUX_SOCKIOS_H |
20 | #define _LINUX_SOCKIOS_H |
21 | |
22 | #include <asm/bitsperlong.h> |
23 | #include <asm/sockios.h> |
24 | |
25 | /* Linux-specific socket ioctls */ |
26 | #define SIOCINQ FIONREAD |
27 | #define SIOCOUTQ TIOCOUTQ /* output queue size (not sent + not acked) */ |
28 | |
29 | #define SOCK_IOC_TYPE 0x89 |
30 | |
31 | /* |
32 | * the timeval/timespec data structure layout is defined by libc, |
33 | * so we need to cover both possible versions on 32-bit. |
34 | */ |
35 | /* Get stamp (timeval) */ |
36 | #define SIOCGSTAMP_NEW _IOR(SOCK_IOC_TYPE, 0x06, long long[2]) |
37 | /* Get stamp (timespec) */ |
38 | #define SIOCGSTAMPNS_NEW _IOR(SOCK_IOC_TYPE, 0x07, long long[2]) |
39 | |
40 | #if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__)) |
41 | /* on 64-bit and x32, avoid the ?: operator */ |
42 | #define SIOCGSTAMP SIOCGSTAMP_OLD |
43 | #define SIOCGSTAMPNS SIOCGSTAMPNS_OLD |
44 | #else |
45 | #define SIOCGSTAMP ((sizeof(struct timeval)) == 8 ? \ |
46 | SIOCGSTAMP_OLD : SIOCGSTAMP_NEW) |
47 | #define SIOCGSTAMPNS ((sizeof(struct timespec)) == 8 ? \ |
48 | SIOCGSTAMPNS_OLD : SIOCGSTAMPNS_NEW) |
49 | #endif |
50 | |
51 | /* Routing table calls. */ |
52 | #define SIOCADDRT 0x890B /* add routing table entry */ |
53 | #define SIOCDELRT 0x890C /* delete routing table entry */ |
54 | #define SIOCRTMSG 0x890D /* unused */ |
55 | |
56 | /* Socket configuration controls. */ |
57 | #define SIOCGIFNAME 0x8910 /* get iface name */ |
58 | #define SIOCSIFLINK 0x8911 /* set iface channel */ |
59 | #define SIOCGIFCONF 0x8912 /* get iface list */ |
60 | #define SIOCGIFFLAGS 0x8913 /* get flags */ |
61 | #define SIOCSIFFLAGS 0x8914 /* set flags */ |
62 | #define SIOCGIFADDR 0x8915 /* get PA address */ |
63 | #define SIOCSIFADDR 0x8916 /* set PA address */ |
64 | #define SIOCGIFDSTADDR 0x8917 /* get remote PA address */ |
65 | #define SIOCSIFDSTADDR 0x8918 /* set remote PA address */ |
66 | #define SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ |
67 | #define SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ |
68 | #define SIOCGIFNETMASK 0x891b /* get network PA mask */ |
69 | #define SIOCSIFNETMASK 0x891c /* set network PA mask */ |
70 | #define SIOCGIFMETRIC 0x891d /* get metric */ |
71 | #define SIOCSIFMETRIC 0x891e /* set metric */ |
72 | #define SIOCGIFMEM 0x891f /* get memory address (BSD) */ |
73 | #define SIOCSIFMEM 0x8920 /* set memory address (BSD) */ |
74 | #define SIOCGIFMTU 0x8921 /* get MTU size */ |
75 | #define SIOCSIFMTU 0x8922 /* set MTU size */ |
76 | #define SIOCSIFNAME 0x8923 /* set interface name */ |
77 | #define SIOCSIFHWADDR 0x8924 /* set hardware address */ |
78 | #define SIOCGIFENCAP 0x8925 /* get/set encapsulations */ |
79 | #define SIOCSIFENCAP 0x8926 |
80 | #define SIOCGIFHWADDR 0x8927 /* Get hardware address */ |
81 | #define SIOCGIFSLAVE 0x8929 /* Driver slaving support */ |
82 | #define SIOCSIFSLAVE 0x8930 |
83 | #define SIOCADDMULTI 0x8931 /* Multicast address lists */ |
84 | #define SIOCDELMULTI 0x8932 |
85 | #define SIOCGIFINDEX 0x8933 /* name -> if_index mapping */ |
86 | #define SIOGIFINDEX SIOCGIFINDEX /* misprint compatibility :-) */ |
87 | #define SIOCSIFPFLAGS 0x8934 /* set/get extended flags set */ |
88 | #define SIOCGIFPFLAGS 0x8935 |
89 | #define SIOCDIFADDR 0x8936 /* delete PA address */ |
90 | #define SIOCSIFHWBROADCAST 0x8937 /* set hardware broadcast addr */ |
91 | #define SIOCGIFCOUNT 0x8938 /* get number of devices */ |
92 | |
93 | #define SIOCGIFBR 0x8940 /* Bridging support */ |
94 | #define SIOCSIFBR 0x8941 /* Set bridging options */ |
95 | |
96 | #define SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ |
97 | #define SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ |
98 | |
99 | /* SIOCGIFDIVERT was: 0x8944 Frame diversion support */ |
100 | /* SIOCSIFDIVERT was: 0x8945 Set frame diversion options */ |
101 | |
102 | #define SIOCETHTOOL 0x8946 /* Ethtool interface */ |
103 | |
104 | #define SIOCGMIIPHY 0x8947 /* Get address of MII PHY in use. */ |
105 | #define SIOCGMIIREG 0x8948 /* Read MII PHY register. */ |
106 | #define SIOCSMIIREG 0x8949 /* Write MII PHY register. */ |
107 | |
108 | #define SIOCWANDEV 0x894A /* get/set netdev parameters */ |
109 | |
110 | #define SIOCOUTQNSD 0x894B /* output queue size (not sent only) */ |
111 | #define SIOCGSKNS 0x894C /* get socket network namespace */ |
112 | |
113 | /* ARP cache control calls. */ |
114 | /* 0x8950 - 0x8952 * obsolete calls, don't re-use */ |
115 | #define SIOCDARP 0x8953 /* delete ARP table entry */ |
116 | #define SIOCGARP 0x8954 /* get ARP table entry */ |
117 | #define SIOCSARP 0x8955 /* set ARP table entry */ |
118 | |
119 | /* RARP cache control calls. */ |
120 | #define SIOCDRARP 0x8960 /* delete RARP table entry */ |
121 | #define SIOCGRARP 0x8961 /* get RARP table entry */ |
122 | #define SIOCSRARP 0x8962 /* set RARP table entry */ |
123 | |
124 | /* Driver configuration calls */ |
125 | |
126 | #define SIOCGIFMAP 0x8970 /* Get device parameters */ |
127 | #define SIOCSIFMAP 0x8971 /* Set device parameters */ |
128 | |
129 | /* DLCI configuration calls */ |
130 | |
131 | #define SIOCADDDLCI 0x8980 /* Create new DLCI device */ |
132 | #define SIOCDELDLCI 0x8981 /* Delete DLCI device */ |
133 | |
134 | #define SIOCGIFVLAN 0x8982 /* 802.1Q VLAN support */ |
135 | #define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */ |
136 | |
137 | /* bonding calls */ |
138 | |
139 | #define SIOCBONDENSLAVE 0x8990 /* enslave a device to the bond */ |
140 | #define SIOCBONDRELEASE 0x8991 /* release a slave from the bond*/ |
141 | #define SIOCBONDSETHWADDR 0x8992 /* set the hw addr of the bond */ |
142 | #define SIOCBONDSLAVEINFOQUERY 0x8993 /* rtn info about slave state */ |
143 | #define SIOCBONDINFOQUERY 0x8994 /* rtn info about bond state */ |
144 | #define SIOCBONDCHANGEACTIVE 0x8995 /* update to a new active slave */ |
145 | |
146 | /* bridge calls */ |
147 | #define SIOCBRADDBR 0x89a0 /* create new bridge device */ |
148 | #define SIOCBRDELBR 0x89a1 /* remove bridge device */ |
149 | #define SIOCBRADDIF 0x89a2 /* add interface to bridge */ |
150 | #define SIOCBRDELIF 0x89a3 /* remove interface from bridge */ |
151 | |
152 | /* hardware time stamping: parameters in linux/net_tstamp.h */ |
153 | #define SIOCSHWTSTAMP 0x89b0 /* set and get config */ |
154 | #define SIOCGHWTSTAMP 0x89b1 /* get config */ |
155 | |
156 | /* Device private ioctl calls */ |
157 | |
158 | /* |
159 | * These 16 ioctls are available to devices via the do_ioctl() device |
160 | * vector. Each device should include this file and redefine these names |
161 | * as their own. Because these are device dependent it is a good idea |
162 | * _NOT_ to issue them to random objects and hope. |
163 | * |
164 | * THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM |
165 | */ |
166 | |
167 | #define SIOCDEVPRIVATE 0x89F0 /* to 89FF */ |
168 | |
169 | /* |
170 | * These 16 ioctl calls are protocol private |
171 | */ |
172 | |
173 | #define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */ |
174 | #endif /* _LINUX_SOCKIOS_H */ |
175 | |