| 1 | /**************************************************************************** | 
| 2 | ** | 
| 3 | ** Copyright (C) 2016 The Qt Company Ltd. | 
| 4 | ** Contact: https://www.qt.io/licensing/ | 
| 5 | ** | 
| 6 | ** This file is part of the QtGui module of the Qt Toolkit. | 
| 7 | ** | 
| 8 | ** $QT_BEGIN_LICENSE:LGPL$ | 
| 9 | ** Commercial License Usage | 
| 10 | ** Licensees holding valid commercial Qt licenses may use this file in | 
| 11 | ** accordance with the commercial license agreement provided with the | 
| 12 | ** Software or, alternatively, in accordance with the terms contained in | 
| 13 | ** a written agreement between you and The Qt Company. For licensing terms | 
| 14 | ** and conditions see https://www.qt.io/terms-conditions. For further | 
| 15 | ** information use the contact form at https://www.qt.io/contact-us. | 
| 16 | ** | 
| 17 | ** GNU Lesser General Public License Usage | 
| 18 | ** Alternatively, this file may be used under the terms of the GNU Lesser | 
| 19 | ** General Public License version 3 as published by the Free Software | 
| 20 | ** Foundation and appearing in the file LICENSE.LGPL3 included in the | 
| 21 | ** packaging of this file. Please review the following information to | 
| 22 | ** ensure the GNU Lesser General Public License version 3 requirements | 
| 23 | ** will be met: https://www.gnu.org/licenses/lgpl-3.0.html. | 
| 24 | ** | 
| 25 | ** GNU General Public License Usage | 
| 26 | ** Alternatively, this file may be used under the terms of the GNU | 
| 27 | ** General Public License version 2.0 or (at your option) the GNU General | 
| 28 | ** Public license version 3 or any later version approved by the KDE Free | 
| 29 | ** Qt Foundation. The licenses are as published by the Free Software | 
| 30 | ** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3 | 
| 31 | ** included in the packaging of this file. Please review the following | 
| 32 | ** information to ensure the GNU General Public License requirements will | 
| 33 | ** be met: https://www.gnu.org/licenses/gpl-2.0.html and | 
| 34 | ** https://www.gnu.org/licenses/gpl-3.0.html. | 
| 35 | ** | 
| 36 | ** $QT_END_LICENSE$ | 
| 37 | ** | 
| 38 | ****************************************************************************/ | 
| 39 |  | 
| 40 | #include "qevdevmousemanager_p.h" | 
| 41 |  | 
| 42 | #include <QtInputSupport/private/qevdevutil_p.h> | 
| 43 |  | 
| 44 | #include <QStringList> | 
| 45 | #include <QGuiApplication> | 
| 46 | #include <QScreen> | 
| 47 | #include <QLoggingCategory> | 
| 48 | #include <qpa/qwindowsysteminterface.h> | 
| 49 | #include <QtDeviceDiscoverySupport/private/qdevicediscovery_p.h> | 
| 50 | #include <private/qguiapplication_p.h> | 
| 51 | #include <private/qinputdevicemanager_p_p.h> | 
| 52 | #include <private/qhighdpiscaling_p.h> | 
| 53 |  | 
| 54 | QT_BEGIN_NAMESPACE | 
| 55 |  | 
| 56 | Q_DECLARE_LOGGING_CATEGORY(qLcEvdevMouse) | 
| 57 |  | 
| 58 | QEvdevMouseManager::QEvdevMouseManager(const QString &key, const QString &specification, QObject *parent) | 
| 59 |     : QObject(parent), m_x(0), m_y(0), m_xoffset(0), m_yoffset(0) | 
| 60 | { | 
| 61 |     Q_UNUSED(key); | 
| 62 |  | 
| 63 |     QString spec = QString::fromLocal8Bit(str: qgetenv(varName: "QT_QPA_EVDEV_MOUSE_PARAMETERS" )); | 
| 64 |  | 
| 65 |     if (spec.isEmpty()) | 
| 66 |         spec = specification; | 
| 67 |  | 
| 68 |     auto parsed = QEvdevUtil::parseSpecification(specification: spec); | 
| 69 |     m_spec = std::move(parsed.spec); | 
| 70 |  | 
| 71 |     for (const QStringRef &arg : qAsConst(t&: parsed.args)) { | 
| 72 |         if (arg.startsWith(s: QLatin1String("xoffset=" ))) { | 
| 73 |             m_xoffset = arg.mid(pos: 8).toInt(); | 
| 74 |         } else if (arg.startsWith(s: QLatin1String("yoffset=" ))) { | 
| 75 |             m_yoffset = arg.mid(pos: 8).toInt(); | 
| 76 |         } | 
| 77 |     } | 
| 78 |  | 
| 79 |     // add all mice for devices specified in the argument list | 
| 80 |     for (const QString &device : qAsConst(t&: parsed.devices)) | 
| 81 |         addMouse(deviceNode: device); | 
| 82 |  | 
| 83 |     if (parsed.devices.isEmpty()) { | 
| 84 |         qCDebug(qLcEvdevMouse, "evdevmouse: Using device discovery" ); | 
| 85 |         if (auto deviceDiscovery = QDeviceDiscovery::create(type: QDeviceDiscovery::Device_Mouse | QDeviceDiscovery::Device_Touchpad, parent: this)) { | 
| 86 |             // scan and add already connected keyboards | 
| 87 |             const QStringList devices = deviceDiscovery->scanConnectedDevices(); | 
| 88 |             for (const QString &device : devices) | 
| 89 |                 addMouse(deviceNode: device); | 
| 90 |  | 
| 91 |             connect(sender: deviceDiscovery, signal: &QDeviceDiscovery::deviceDetected, | 
| 92 |                     receiver: this, slot: &QEvdevMouseManager::addMouse); | 
| 93 |             connect(sender: deviceDiscovery, signal: &QDeviceDiscovery::deviceRemoved, | 
| 94 |                     receiver: this, slot: &QEvdevMouseManager::removeMouse); | 
| 95 |         } | 
| 96 |     } | 
| 97 |  | 
| 98 |     QInputDeviceManager *manager = QGuiApplicationPrivate::inputDeviceManager(); | 
| 99 |     connect(sender: manager, signal: &QInputDeviceManager::cursorPositionChangeRequested, slot: [this](const QPoint &pos) { | 
| 100 |         m_x = pos.x(); | 
| 101 |         m_y = pos.y(); | 
| 102 |         clampPosition(); | 
| 103 |     }); | 
| 104 | } | 
| 105 |  | 
| 106 | QEvdevMouseManager::~QEvdevMouseManager() | 
| 107 | { | 
| 108 | } | 
| 109 |  | 
| 110 | void QEvdevMouseManager::clampPosition() | 
| 111 | { | 
| 112 |     // clamp to screen geometry | 
| 113 |     QScreen *primaryScreen = QGuiApplication::primaryScreen(); | 
| 114 |     QRect g = QHighDpi::toNativePixels(value: primaryScreen->virtualGeometry(), context: primaryScreen); | 
| 115 |     if (m_x + m_xoffset < g.left()) | 
| 116 |         m_x = g.left() - m_xoffset; | 
| 117 |     else if (m_x + m_xoffset > g.right()) | 
| 118 |         m_x = g.right() - m_xoffset; | 
| 119 |  | 
| 120 |     if (m_y + m_yoffset < g.top()) | 
| 121 |         m_y = g.top() - m_yoffset; | 
| 122 |     else if (m_y + m_yoffset > g.bottom()) | 
| 123 |         m_y = g.bottom() - m_yoffset; | 
| 124 | } | 
| 125 |  | 
| 126 | void QEvdevMouseManager::handleMouseEvent(int x, int y, bool abs, Qt::MouseButtons buttons, | 
| 127 |                                           Qt::MouseButton button, QEvent::Type type) | 
| 128 | { | 
| 129 |     // update current absolute coordinates | 
| 130 |     if (!abs) { | 
| 131 |         m_x += x; | 
| 132 |         m_y += y; | 
| 133 |     } else { | 
| 134 |         m_x = x; | 
| 135 |         m_y = y; | 
| 136 |     } | 
| 137 |  | 
| 138 |     clampPosition(); | 
| 139 |  | 
| 140 |     QPoint pos(m_x + m_xoffset, m_y + m_yoffset); | 
| 141 |     // Cannot track the keyboard modifiers ourselves here. Instead, report the | 
| 142 |     // modifiers from the last key event that has been seen by QGuiApplication. | 
| 143 |     QWindowSystemInterface::handleMouseEvent(window: 0, local: pos, global: pos, state: buttons, button, type, mods: QGuiApplicationPrivate::inputDeviceManager()->keyboardModifiers()); | 
| 144 | } | 
| 145 |  | 
| 146 | void QEvdevMouseManager::handleWheelEvent(QPoint delta) | 
| 147 | { | 
| 148 |     QPoint pos(m_x + m_xoffset, m_y + m_yoffset); | 
| 149 |     QWindowSystemInterface::handleWheelEvent(window: 0, local: pos, global: pos, pixelDelta: QPoint(), angleDelta: delta, mods: QGuiApplicationPrivate::inputDeviceManager()->keyboardModifiers()); | 
| 150 | } | 
| 151 |  | 
| 152 | void QEvdevMouseManager::addMouse(const QString &deviceNode) | 
| 153 | { | 
| 154 |     qCDebug(qLcEvdevMouse, "Adding mouse at %ls" , qUtf16Printable(deviceNode)); | 
| 155 |     auto handler = QEvdevMouseHandler::create(device: deviceNode, specification: m_spec); | 
| 156 |     if (handler) { | 
| 157 |         connect(sender: handler.get(), signal: &QEvdevMouseHandler::handleMouseEvent, | 
| 158 |                 receiver: this, slot: &QEvdevMouseManager::handleMouseEvent); | 
| 159 |         connect(sender: handler.get(), signal: &QEvdevMouseHandler::handleWheelEvent, | 
| 160 |                 receiver: this, slot: &QEvdevMouseManager::handleWheelEvent); | 
| 161 |         m_mice.add(deviceNode, handler: std::move(handler)); | 
| 162 |         updateDeviceCount(); | 
| 163 |     } else { | 
| 164 |         qWarning(msg: "evdevmouse: Failed to open mouse device %ls" , qUtf16Printable(deviceNode)); | 
| 165 |     } | 
| 166 | } | 
| 167 |  | 
| 168 | void QEvdevMouseManager::removeMouse(const QString &deviceNode) | 
| 169 | { | 
| 170 |     if (m_mice.remove(deviceNode)) { | 
| 171 |         qCDebug(qLcEvdevMouse, "Removing mouse at %ls" , qUtf16Printable(deviceNode)); | 
| 172 |         updateDeviceCount(); | 
| 173 |     } | 
| 174 | } | 
| 175 |  | 
| 176 | void QEvdevMouseManager::updateDeviceCount() | 
| 177 | { | 
| 178 |     QInputDeviceManagerPrivate::get(mgr: QGuiApplicationPrivate::inputDeviceManager())->setDeviceCount( | 
| 179 |         type: QInputDeviceManager::DeviceTypePointer, count: m_mice.count()); | 
| 180 | } | 
| 181 |  | 
| 182 | QT_END_NAMESPACE | 
| 183 |  |