| 1 | /**************************************************************************** |
| 2 | ** |
| 3 | ** Copyright (C) 2016 The Qt Company Ltd. |
| 4 | ** Contact: https://www.qt.io/licensing/ |
| 5 | ** |
| 6 | ** This file is part of the plugins module of the Qt Toolkit. |
| 7 | ** |
| 8 | ** $QT_BEGIN_LICENSE:LGPL$ |
| 9 | ** Commercial License Usage |
| 10 | ** Licensees holding valid commercial Qt licenses may use this file in |
| 11 | ** accordance with the commercial license agreement provided with the |
| 12 | ** Software or, alternatively, in accordance with the terms contained in |
| 13 | ** a written agreement between you and The Qt Company. For licensing terms |
| 14 | ** and conditions see https://www.qt.io/terms-conditions. For further |
| 15 | ** information use the contact form at https://www.qt.io/contact-us. |
| 16 | ** |
| 17 | ** GNU Lesser General Public License Usage |
| 18 | ** Alternatively, this file may be used under the terms of the GNU Lesser |
| 19 | ** General Public License version 3 as published by the Free Software |
| 20 | ** Foundation and appearing in the file LICENSE.LGPL3 included in the |
| 21 | ** packaging of this file. Please review the following information to |
| 22 | ** ensure the GNU Lesser General Public License version 3 requirements |
| 23 | ** will be met: https://www.gnu.org/licenses/lgpl-3.0.html. |
| 24 | ** |
| 25 | ** GNU General Public License Usage |
| 26 | ** Alternatively, this file may be used under the terms of the GNU |
| 27 | ** General Public License version 2.0 or (at your option) the GNU General |
| 28 | ** Public license version 3 or any later version approved by the KDE Free |
| 29 | ** Qt Foundation. The licenses are as published by the Free Software |
| 30 | ** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3 |
| 31 | ** included in the packaging of this file. Please review the following |
| 32 | ** information to ensure the GNU General Public License requirements will |
| 33 | ** be met: https://www.gnu.org/licenses/gpl-2.0.html and |
| 34 | ** https://www.gnu.org/licenses/gpl-3.0.html. |
| 35 | ** |
| 36 | ** $QT_END_LICENSE$ |
| 37 | ** |
| 38 | ****************************************************************************/ |
| 39 | |
| 40 | #include "qlibinputkeyboard_p.h" |
| 41 | #include <QtCore/QTextCodec> |
| 42 | #include <QtCore/QLoggingCategory> |
| 43 | #include <QtGui/private/qguiapplication_p.h> |
| 44 | #include <QtGui/private/qinputdevicemanager_p.h> |
| 45 | #include <qpa/qwindowsysteminterface.h> |
| 46 | #include <libinput.h> |
| 47 | #if QT_CONFIG(xkbcommon) |
| 48 | #include <xkbcommon/xkbcommon-keysyms.h> |
| 49 | #include <xkbcommon/xkbcommon-names.h> |
| 50 | #include <QtXkbCommonSupport/private/qxkbcommon_p.h> |
| 51 | #endif |
| 52 | |
| 53 | QT_BEGIN_NAMESPACE |
| 54 | |
| 55 | Q_DECLARE_LOGGING_CATEGORY(qLcLibInput) |
| 56 | |
| 57 | const int REPEAT_DELAY = 500; |
| 58 | const int REPEAT_RATE = 100; |
| 59 | |
| 60 | QLibInputKeyboard::QLibInputKeyboard() |
| 61 | { |
| 62 | #if QT_CONFIG(xkbcommon) |
| 63 | qCDebug(qLcLibInput) << "Using xkbcommon for key mapping" ; |
| 64 | m_ctx = xkb_context_new(flags: XKB_CONTEXT_NO_FLAGS); |
| 65 | if (!m_ctx) { |
| 66 | qWarning(msg: "Failed to create xkb context" ); |
| 67 | return; |
| 68 | } |
| 69 | m_keymap = xkb_keymap_new_from_names(context: m_ctx, names: nullptr, flags: XKB_KEYMAP_COMPILE_NO_FLAGS); |
| 70 | if (!m_keymap) { |
| 71 | qCWarning(qLcLibInput, "Failed to compile keymap" ); |
| 72 | return; |
| 73 | } |
| 74 | m_state = xkb_state_new(keymap: m_keymap); |
| 75 | if (!m_state) { |
| 76 | qCWarning(qLcLibInput, "Failed to create xkb state" ); |
| 77 | return; |
| 78 | } |
| 79 | |
| 80 | m_repeatTimer.setSingleShot(true); |
| 81 | connect(sender: &m_repeatTimer, signal: &QTimer::timeout, receiver: this, slot: &QLibInputKeyboard::handleRepeat); |
| 82 | #else |
| 83 | qCWarning(qLcLibInput) << "xkbcommon not available, not performing key mapping" ; |
| 84 | #endif |
| 85 | } |
| 86 | |
| 87 | QLibInputKeyboard::~QLibInputKeyboard() |
| 88 | { |
| 89 | #if QT_CONFIG(xkbcommon) |
| 90 | if (m_state) |
| 91 | xkb_state_unref(state: m_state); |
| 92 | if (m_keymap) |
| 93 | xkb_keymap_unref(keymap: m_keymap); |
| 94 | if (m_ctx) |
| 95 | xkb_context_unref(context: m_ctx); |
| 96 | #endif |
| 97 | } |
| 98 | |
| 99 | void QLibInputKeyboard::processKey(libinput_event_keyboard *e) |
| 100 | { |
| 101 | #if QT_CONFIG(xkbcommon) |
| 102 | if (!m_ctx || !m_keymap || !m_state) |
| 103 | return; |
| 104 | |
| 105 | const uint32_t keycode = libinput_event_keyboard_get_key(event: e) + 8; |
| 106 | const xkb_keysym_t sym = xkb_state_key_get_one_sym(state: m_state, key: keycode); |
| 107 | const bool pressed = libinput_event_keyboard_get_key_state(event: e) == LIBINPUT_KEY_STATE_PRESSED; |
| 108 | |
| 109 | // Modifiers here is the modifier state before the event, i.e. not |
| 110 | // including the current key in case it is a modifier. See the XOR |
| 111 | // logic in QKeyEvent::modifiers(). ### QTBUG-73826 |
| 112 | Qt::KeyboardModifiers modifiers = QXkbCommon::modifiers(state: m_state); |
| 113 | |
| 114 | const QString text = QXkbCommon::lookupString(state: m_state, code: keycode); |
| 115 | const int qtkey = QXkbCommon::keysymToQtKey(keysym: sym, modifiers, state: m_state, code: keycode); |
| 116 | |
| 117 | xkb_state_update_key(state: m_state, key: keycode, direction: pressed ? XKB_KEY_DOWN : XKB_KEY_UP); |
| 118 | |
| 119 | Qt::KeyboardModifiers modifiersAfterStateChange = QXkbCommon::modifiers(state: m_state); |
| 120 | QGuiApplicationPrivate::inputDeviceManager()->setKeyboardModifiers(modifiersAfterStateChange); |
| 121 | |
| 122 | QWindowSystemInterface::handleExtendedKeyEvent(window: nullptr, |
| 123 | type: pressed ? QEvent::KeyPress : QEvent::KeyRelease, |
| 124 | key: qtkey, modifiers, nativeScanCode: keycode, nativeVirtualKey: sym, nativeModifiers: modifiers, text); |
| 125 | |
| 126 | if (pressed && xkb_keymap_key_repeats(keymap: m_keymap, key: keycode)) { |
| 127 | m_repeatData.qtkey = qtkey; |
| 128 | m_repeatData.mods = modifiers; |
| 129 | m_repeatData.nativeScanCode = keycode; |
| 130 | m_repeatData.virtualKey = sym; |
| 131 | m_repeatData.nativeMods = modifiers; |
| 132 | m_repeatData.unicodeText = text; |
| 133 | m_repeatData.repeatCount = 1; |
| 134 | m_repeatTimer.setInterval(REPEAT_DELAY); |
| 135 | m_repeatTimer.start(); |
| 136 | } else if (m_repeatTimer.isActive()) { |
| 137 | m_repeatTimer.stop(); |
| 138 | } |
| 139 | |
| 140 | #else |
| 141 | Q_UNUSED(e); |
| 142 | #endif |
| 143 | } |
| 144 | |
| 145 | #if QT_CONFIG(xkbcommon) |
| 146 | void QLibInputKeyboard::handleRepeat() |
| 147 | { |
| 148 | QWindowSystemInterface::handleExtendedKeyEvent(window: nullptr, type: QEvent::KeyPress, |
| 149 | key: m_repeatData.qtkey, modifiers: m_repeatData.mods, |
| 150 | nativeScanCode: m_repeatData.nativeScanCode, nativeVirtualKey: m_repeatData.virtualKey, nativeModifiers: m_repeatData.nativeMods, |
| 151 | text: m_repeatData.unicodeText, autorep: true, count: m_repeatData.repeatCount); |
| 152 | m_repeatData.repeatCount += 1; |
| 153 | m_repeatTimer.setInterval(REPEAT_RATE); |
| 154 | m_repeatTimer.start(); |
| 155 | } |
| 156 | #endif |
| 157 | |
| 158 | QT_END_NAMESPACE |
| 159 | |