1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * linux/arch/arm/mach-sa1100/jornada720.c
4 *
5 * HP Jornada720 init code
6 *
7 * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
8 * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
9 * Copyright (C) 2005 Michael Gernoth <michael@gernoth.net>
10 */
11
12#include <linux/init.h>
13#include <linux/kernel.h>
14#include <linux/tty.h>
15#include <linux/delay.h>
16#include <linux/gpio/machine.h>
17#include <linux/platform_data/sa11x0-serial.h>
18#include <linux/platform_device.h>
19#include <linux/ioport.h>
20#include <linux/mtd/mtd.h>
21#include <linux/mtd/partitions.h>
22#include <video/s1d13xxxfb.h>
23
24#include <asm/hardware/sa1111.h>
25#include <asm/page.h>
26#include <asm/mach-types.h>
27#include <asm/setup.h>
28#include <asm/mach/arch.h>
29#include <asm/mach/flash.h>
30#include <asm/mach/map.h>
31
32#include <mach/hardware.h>
33#include <mach/irqs.h>
34
35#include "generic.h"
36
37/*
38 * HP Documentation referred in this file:
39 * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
40 */
41
42/* line 110 of HP's doc */
43#define TUCR_VAL 0x20000400
44
45/* memory space (line 52 of HP's doc) */
46#define SA1111REGSTART 0x40000000
47#define SA1111REGLEN 0x00002000
48#define EPSONREGSTART 0x48000000
49#define EPSONREGLEN 0x00100000
50#define EPSONFBSTART 0x48200000
51/* 512kB framebuffer */
52#define EPSONFBLEN 512*1024
53
54static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = {
55 /* line 344 of HP's doc */
56 {0x0001,0x00}, // Miscellaneous Register
57 {0x01FC,0x00}, // Display Mode Register
58 {0x0004,0x00}, // General IO Pins Configuration Register 0
59 {0x0005,0x00}, // General IO Pins Configuration Register 1
60 {0x0008,0x00}, // General IO Pins Control Register 0
61 {0x0009,0x00}, // General IO Pins Control Register 1
62 {0x0010,0x01}, // Memory Clock Configuration Register
63 {0x0014,0x11}, // LCD Pixel Clock Configuration Register
64 {0x0018,0x01}, // CRT/TV Pixel Clock Configuration Register
65 {0x001C,0x01}, // MediaPlug Clock Configuration Register
66 {0x001E,0x01}, // CPU To Memory Wait State Select Register
67 {0x0020,0x00}, // Memory Configuration Register
68 {0x0021,0x45}, // DRAM Refresh Rate Register
69 {0x002A,0x01}, // DRAM Timings Control Register 0
70 {0x002B,0x03}, // DRAM Timings Control Register 1
71 {0x0030,0x1c}, // Panel Type Register
72 {0x0031,0x00}, // MOD Rate Register
73 {0x0032,0x4F}, // LCD Horizontal Display Width Register
74 {0x0034,0x07}, // LCD Horizontal Non-Display Period Register
75 {0x0035,0x01}, // TFT FPLINE Start Position Register
76 {0x0036,0x0B}, // TFT FPLINE Pulse Width Register
77 {0x0038,0xEF}, // LCD Vertical Display Height Register 0
78 {0x0039,0x00}, // LCD Vertical Display Height Register 1
79 {0x003A,0x13}, // LCD Vertical Non-Display Period Register
80 {0x003B,0x0B}, // TFT FPFRAME Start Position Register
81 {0x003C,0x01}, // TFT FPFRAME Pulse Width Register
82 {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
83 {0x0041,0x00}, // LCD Miscellaneous Register
84 {0x0042,0x00}, // LCD Display Start Address Register 0
85 {0x0043,0x00}, // LCD Display Start Address Register 1
86 {0x0044,0x00}, // LCD Display Start Address Register 2
87 {0x0046,0x80}, // LCD Memory Address Offset Register 0
88 {0x0047,0x02}, // LCD Memory Address Offset Register 1
89 {0x0048,0x00}, // LCD Pixel Panning Register
90 {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register
91 {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register
92 {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register
93 {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register
94 {0x0053,0x01}, // CRT/TV HRTC Start Position Register
95 {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register
96 {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0
97 {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1
98 {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register
99 {0x0059,0x09}, // CRT/TV VRTC Start Position Register
100 {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register
101 {0x005B,0x10}, // TV Output Control Register
102 {0x0060,0x03}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
103 {0x0062,0x00}, // CRT/TV Display Start Address Register 0
104 {0x0063,0x00}, // CRT/TV Display Start Address Register 1
105 {0x0064,0x00}, // CRT/TV Display Start Address Register 2
106 {0x0066,0x40}, // CRT/TV Memory Address Offset Register 0
107 {0x0067,0x01}, // CRT/TV Memory Address Offset Register 1
108 {0x0068,0x00}, // CRT/TV Pixel Panning Register
109 {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register
110 {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register
111 {0x0070,0x00}, // LCD Ink/Cursor Control Register
112 {0x0071,0x01}, // LCD Ink/Cursor Start Address Register
113 {0x0072,0x00}, // LCD Cursor X Position Register 0
114 {0x0073,0x00}, // LCD Cursor X Position Register 1
115 {0x0074,0x00}, // LCD Cursor Y Position Register 0
116 {0x0075,0x00}, // LCD Cursor Y Position Register 1
117 {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register
118 {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register
119 {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register
120 {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register
121 {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register
122 {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register
123 {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register
124 {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register
125 {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register
126 {0x0082,0x00}, // CRT/TV Cursor X Position Register 0
127 {0x0083,0x00}, // CRT/TV Cursor X Position Register 1
128 {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0
129 {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1
130 {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register
131 {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register
132 {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register
133 {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register
134 {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register
135 {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register
136 {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register
137 {0x0100,0x00}, // BitBlt Control Register 0
138 {0x0101,0x00}, // BitBlt Control Register 1
139 {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register
140 {0x0103,0x00}, // BitBlt Operation Register
141 {0x0104,0x00}, // BitBlt Source Start Address Register 0
142 {0x0105,0x00}, // BitBlt Source Start Address Register 1
143 {0x0106,0x00}, // BitBlt Source Start Address Register 2
144 {0x0108,0x00}, // BitBlt Destination Start Address Register 0
145 {0x0109,0x00}, // BitBlt Destination Start Address Register 1
146 {0x010A,0x00}, // BitBlt Destination Start Address Register 2
147 {0x010C,0x00}, // BitBlt Memory Address Offset Register 0
148 {0x010D,0x00}, // BitBlt Memory Address Offset Register 1
149 {0x0110,0x00}, // BitBlt Width Register 0
150 {0x0111,0x00}, // BitBlt Width Register 1
151 {0x0112,0x00}, // BitBlt Height Register 0
152 {0x0113,0x00}, // BitBlt Height Register 1
153 {0x0114,0x00}, // BitBlt Background Color Register 0
154 {0x0115,0x00}, // BitBlt Background Color Register 1
155 {0x0118,0x00}, // BitBlt Foreground Color Register 0
156 {0x0119,0x00}, // BitBlt Foreground Color Register 1
157 {0x01E0,0x00}, // Look-Up Table Mode Register
158 {0x01E2,0x00}, // Look-Up Table Address Register
159 /* not sure, wouldn't like to mess with the driver */
160 {0x01E4,0x00}, // Look-Up Table Data Register
161 /* jornada doc says 0x00, but I trust the driver */
162 {0x01F0,0x10}, // Power Save Configuration Register
163 {0x01F1,0x00}, // Power Save Status Register
164 {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register
165 {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
166};
167
168static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
169 .initregs = s1d13xxxfb_initregs,
170 .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs),
171 .platform_init_video = NULL
172};
173
174static struct resource s1d13xxxfb_resources[] = {
175 [0] = DEFINE_RES_MEM(EPSONFBSTART, EPSONFBLEN),
176 [1] = DEFINE_RES_MEM(EPSONREGSTART, EPSONREGLEN),
177};
178
179static struct platform_device s1d13xxxfb_device = {
180 .name = S1D_DEVICENAME,
181 .id = 0,
182 .dev = {
183 .platform_data = &s1d13xxxfb_data,
184 },
185 .num_resources = ARRAY_SIZE(s1d13xxxfb_resources),
186 .resource = s1d13xxxfb_resources,
187};
188
189static struct gpiod_lookup_table jornada_pcmcia_gpiod_table = {
190 .dev_id = "1800",
191 .table = {
192 GPIO_LOOKUP("sa1111", 0, "s0-power", GPIO_ACTIVE_HIGH),
193 GPIO_LOOKUP("sa1111", 1, "s1-power", GPIO_ACTIVE_HIGH),
194 GPIO_LOOKUP("sa1111", 2, "s0-3v", GPIO_ACTIVE_HIGH),
195 GPIO_LOOKUP("sa1111", 3, "s1-3v", GPIO_ACTIVE_HIGH),
196 { },
197 },
198};
199
200static struct resource sa1111_resources[] = {
201 [0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN),
202 [1] = DEFINE_RES_IRQ(IRQ_GPIO1),
203};
204
205static struct sa1111_platform_data sa1111_info = {
206 .disable_devs = SA1111_DEVID_PS2_MSE,
207};
208
209static u64 sa1111_dmamask = 0xffffffffUL;
210
211static struct platform_device sa1111_device = {
212 .name = "sa1111",
213 .id = 0,
214 .dev = {
215 .dma_mask = &sa1111_dmamask,
216 .coherent_dma_mask = 0xffffffff,
217 .platform_data = &sa1111_info,
218 },
219 .num_resources = ARRAY_SIZE(sa1111_resources),
220 .resource = sa1111_resources,
221};
222
223static struct platform_device jornada_ssp_device = {
224 .name = "jornada_ssp",
225 .id = -1,
226};
227
228static struct resource jornada_kbd_resources[] = {
229 DEFINE_RES_IRQ(IRQ_GPIO0),
230};
231
232static struct platform_device jornada_kbd_device = {
233 .name = "jornada720_kbd",
234 .id = -1,
235 .num_resources = ARRAY_SIZE(jornada_kbd_resources),
236 .resource = jornada_kbd_resources,
237};
238
239static struct gpiod_lookup_table jornada_ts_gpiod_table = {
240 .dev_id = "jornada_ts",
241 .table = {
242 GPIO_LOOKUP("gpio", 9, "penup", GPIO_ACTIVE_HIGH),
243 },
244};
245
246static struct platform_device jornada_ts_device = {
247 .name = "jornada_ts",
248 .id = -1,
249};
250
251static struct platform_device *devices[] __initdata = {
252 &sa1111_device,
253 &jornada_ssp_device,
254 &s1d13xxxfb_device,
255 &jornada_kbd_device,
256 &jornada_ts_device,
257};
258
259static int __init jornada720_init(void)
260{
261 int ret = -ENODEV;
262
263 if (machine_is_jornada720()) {
264 /* we want to use gpio20 as input to drive the clock of our uart 3 */
265 GPDR |= GPIO_GPIO20; /* Clear gpio20 pin as input */
266 TUCR = TUCR_VAL;
267 GPSR = GPIO_GPIO20; /* start gpio20 pin */
268 udelay(1);
269 GPCR = GPIO_GPIO20; /* stop gpio20 */
270 udelay(1);
271 GPSR = GPIO_GPIO20; /* restart gpio20 */
272 udelay(20); /* give it some time to restart */
273
274 gpiod_add_lookup_table(table: &jornada_ts_gpiod_table);
275 gpiod_add_lookup_table(table: &jornada_pcmcia_gpiod_table);
276
277 ret = platform_add_devices(devices, ARRAY_SIZE(devices));
278 }
279
280 return ret;
281}
282
283arch_initcall(jornada720_init);
284
285static struct map_desc jornada720_io_desc[] __initdata = {
286 { /* Epson registers */
287 .virtual = 0xf0000000,
288 .pfn = __phys_to_pfn(EPSONREGSTART),
289 .length = EPSONREGLEN,
290 .type = MT_DEVICE
291 }, { /* Epson frame buffer */
292 .virtual = 0xf1000000,
293 .pfn = __phys_to_pfn(EPSONFBSTART),
294 .length = EPSONFBLEN,
295 .type = MT_DEVICE
296 }
297};
298
299static void __init jornada720_map_io(void)
300{
301 sa1100_map_io();
302 iotable_init(jornada720_io_desc, ARRAY_SIZE(jornada720_io_desc));
303
304 sa1100_register_uart(idx: 0, port: 3);
305 sa1100_register_uart(idx: 1, port: 1);
306}
307
308static struct mtd_partition jornada720_partitions[] = {
309 {
310 .name = "JORNADA720 boot firmware",
311 .size = 0x00040000,
312 .offset = 0,
313 .mask_flags = MTD_WRITEABLE, /* force read-only */
314 }, {
315 .name = "JORNADA720 kernel",
316 .size = 0x000c0000,
317 .offset = 0x00040000,
318 }, {
319 .name = "JORNADA720 params",
320 .size = 0x00040000,
321 .offset = 0x00100000,
322 }, {
323 .name = "JORNADA720 initrd",
324 .size = 0x00100000,
325 .offset = 0x00140000,
326 }, {
327 .name = "JORNADA720 root cramfs",
328 .size = 0x00300000,
329 .offset = 0x00240000,
330 }, {
331 .name = "JORNADA720 usr cramfs",
332 .size = 0x00800000,
333 .offset = 0x00540000,
334 }, {
335 .name = "JORNADA720 usr local",
336 .size = 0, /* will expand to the end of the flash */
337 .offset = 0x00d00000,
338 }
339};
340
341static void jornada720_set_vpp(int vpp)
342{
343 if (vpp)
344 /* enabling flash write (line 470 of HP's doc) */
345 PPSR |= PPC_LDD7;
346 else
347 /* disabling flash write (line 470 of HP's doc) */
348 PPSR &= ~PPC_LDD7;
349 PPDR |= PPC_LDD7;
350}
351
352static struct flash_platform_data jornada720_flash_data = {
353 .map_name = "cfi_probe",
354 .set_vpp = jornada720_set_vpp,
355 .parts = jornada720_partitions,
356 .nr_parts = ARRAY_SIZE(jornada720_partitions),
357};
358
359static struct resource jornada720_flash_resource =
360 DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
361
362static void __init jornada720_mach_init(void)
363{
364 sa11x0_register_mtd(flash: &jornada720_flash_data, res: &jornada720_flash_resource, nr: 1);
365}
366
367MACHINE_START(JORNADA720, "HP Jornada 720")
368 /* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
369 .atag_offset = 0x100,
370 .map_io = jornada720_map_io,
371 .nr_irqs = SA1100_NR_IRQS,
372 .init_irq = sa1100_init_irq,
373 .init_time = sa1100_timer_init,
374 .init_machine = jornada720_mach_init,
375 .init_late = sa11x0_init_late,
376#ifdef CONFIG_SA1111
377 .dma_zone_size = SZ_1M,
378#endif
379 .restart = sa11x0_restart,
380MACHINE_END
381

source code of linux/arch/arm/mach-sa1100/jornada720.c