1 | /* |
2 | * Copyright 2016-2020 Advanced Micro Devices, Inc. |
3 | * |
4 | * Permission is hereby granted, free of charge, to any person obtaining a |
5 | * copy of this software and associated documentation files (the "Software"), |
6 | * to deal in the Software without restriction, including without limitation |
7 | * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
8 | * and/or sell copies of the Software, and to permit persons to whom the |
9 | * Software is furnished to do so, subject to the following conditions: |
10 | * |
11 | * The above copyright notice and this permission notice shall be included in |
12 | * all copies or substantial portions of the Software. |
13 | * |
14 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
15 | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
16 | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
17 | * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
18 | * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
19 | * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
20 | * OTHER DEALINGS IN THE SOFTWARE. |
21 | * |
22 | * Authors: AMD |
23 | * |
24 | */ |
25 | |
26 | #include "hw_sequencer_private.h" |
27 | #include "dce110/dce110_hwseq.h" |
28 | #include "dcn10/dcn10_hwseq.h" |
29 | #include "dcn20/dcn20_hwseq.h" |
30 | |
31 | static const struct hw_sequencer_funcs dcn10_funcs = { |
32 | .program_gamut_remap = dcn10_program_gamut_remap, |
33 | .init_hw = dcn10_init_hw, |
34 | .power_down_on_boot = dcn10_power_down_on_boot, |
35 | .apply_ctx_to_hw = dce110_apply_ctx_to_hw, |
36 | .apply_ctx_for_surface = NULL, |
37 | .program_front_end_for_ctx = dcn20_program_front_end_for_ctx, |
38 | .post_unlock_program_front_end = dcn10_post_unlock_program_front_end, |
39 | .wait_for_pending_cleared = dcn10_wait_for_pending_cleared, |
40 | .update_plane_addr = dcn10_update_plane_addr, |
41 | .update_dchub = dcn10_update_dchub, |
42 | .update_pending_status = dcn10_update_pending_status, |
43 | .program_output_csc = dcn10_program_output_csc, |
44 | .enable_accelerated_mode = dce110_enable_accelerated_mode, |
45 | .enable_timing_synchronization = dcn10_enable_timing_synchronization, |
46 | .enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset, |
47 | .update_info_frame = dce110_update_info_frame, |
48 | .send_immediate_sdp_message = dcn10_send_immediate_sdp_message, |
49 | .enable_stream = dce110_enable_stream, |
50 | .disable_stream = dce110_disable_stream, |
51 | .unblank_stream = dcn10_unblank_stream, |
52 | .blank_stream = dce110_blank_stream, |
53 | .enable_audio_stream = dce110_enable_audio_stream, |
54 | .disable_audio_stream = dce110_disable_audio_stream, |
55 | .disable_plane = dcn10_disable_plane, |
56 | .pipe_control_lock = dcn10_pipe_control_lock, |
57 | .cursor_lock = dcn10_cursor_lock, |
58 | .interdependent_update_lock = dcn10_lock_all_pipes, |
59 | .prepare_bandwidth = dcn10_prepare_bandwidth, |
60 | .optimize_bandwidth = dcn10_optimize_bandwidth, |
61 | .set_drr = dcn10_set_drr, |
62 | .get_position = dcn10_get_position, |
63 | .set_static_screen_control = dcn10_set_static_screen_control, |
64 | .setup_stereo = dcn10_setup_stereo, |
65 | .set_avmute = dce110_set_avmute, |
66 | .log_hw_state = dcn10_log_hw_state, |
67 | .get_hw_state = dcn10_get_hw_state, |
68 | .clear_status_bits = dcn10_clear_status_bits, |
69 | .wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect, |
70 | .edp_backlight_control = dce110_edp_backlight_control, |
71 | .edp_power_control = dce110_edp_power_control, |
72 | .edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready, |
73 | .set_cursor_position = dcn10_set_cursor_position, |
74 | .set_cursor_attribute = dcn10_set_cursor_attribute, |
75 | .set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level, |
76 | .setup_periodic_interrupt = dcn10_setup_periodic_interrupt, |
77 | .set_clock = dcn10_set_clock, |
78 | .get_clock = dcn10_get_clock, |
79 | .get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync, |
80 | .calc_vupdate_position = dcn10_calc_vupdate_position, |
81 | .power_down = dce110_power_down, |
82 | .set_backlight_level = dce110_set_backlight_level, |
83 | .set_abm_immediate_disable = dce110_set_abm_immediate_disable, |
84 | .set_pipe = dce110_set_pipe, |
85 | .enable_lvds_link_output = dce110_enable_lvds_link_output, |
86 | .enable_tmds_link_output = dce110_enable_tmds_link_output, |
87 | .enable_dp_link_output = dce110_enable_dp_link_output, |
88 | .disable_link_output = dce110_disable_link_output, |
89 | .get_dcc_en_bits = dcn10_get_dcc_en_bits, |
90 | .update_visual_confirm_color = dcn10_update_visual_confirm_color, |
91 | }; |
92 | |
93 | static const struct hwseq_private_funcs dcn10_private_funcs = { |
94 | .init_pipes = dcn10_init_pipes, |
95 | .update_plane_addr = dcn10_update_plane_addr, |
96 | .plane_atomic_disconnect = dcn10_plane_atomic_disconnect, |
97 | .program_pipe = dcn10_program_pipe, |
98 | .update_mpcc = dcn10_update_mpcc, |
99 | .set_input_transfer_func = dcn10_set_input_transfer_func, |
100 | .set_output_transfer_func = dcn10_set_output_transfer_func, |
101 | .power_down = dce110_power_down, |
102 | .enable_display_power_gating = dcn10_dummy_display_power_gating, |
103 | .blank_pixel_data = dcn10_blank_pixel_data, |
104 | .reset_hw_ctx_wrap = dcn10_reset_hw_ctx_wrap, |
105 | .enable_stream_timing = dcn10_enable_stream_timing, |
106 | .edp_backlight_control = dce110_edp_backlight_control, |
107 | .disable_stream_gating = NULL, |
108 | .enable_stream_gating = NULL, |
109 | .setup_vupdate_interrupt = dcn10_setup_vupdate_interrupt, |
110 | .did_underflow_occur = dcn10_did_underflow_occur, |
111 | .init_blank = NULL, |
112 | .disable_vga = dcn10_disable_vga, |
113 | .bios_golden_init = dcn10_bios_golden_init, |
114 | .plane_atomic_disable = dcn10_plane_atomic_disable, |
115 | .plane_atomic_power_down = dcn10_plane_atomic_power_down, |
116 | .enable_power_gating_plane = dcn10_enable_power_gating_plane, |
117 | .dpp_pg_control = dcn10_dpp_pg_control, |
118 | .hubp_pg_control = dcn10_hubp_pg_control, |
119 | .dsc_pg_control = NULL, |
120 | .set_hdr_multiplier = dcn10_set_hdr_multiplier, |
121 | .verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high, |
122 | }; |
123 | |
124 | void dcn10_hw_sequencer_construct(struct dc *dc) |
125 | { |
126 | dc->hwss = dcn10_funcs; |
127 | dc->hwseq->funcs = dcn10_private_funcs; |
128 | } |
129 | |