1/*
2 * Driver for simple i2c audio chips.
3 *
4 * Copyright (c) 2000 Gerd Knorr
5 * based on code by:
6 * Eric Sandeen (eric_sandeen@bigfoot.com)
7 * Steve VanDeBogart (vandebo@uclink.berkeley.edu)
8 * Greg Alexander (galexand@acm.org)
9 *
10 * For the TDA9875 part:
11 * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source
12 * and Eric Sandeen
13 *
14 * Copyright(c) 2005-2008 Mauro Carvalho Chehab
15 * - Some cleanups, code fixes, etc
16 * - Convert it to V4L2 API
17 *
18 * This code is placed under the terms of the GNU General Public License
19 *
20 * OPTIONS:
21 * debug - set to 1 if you'd like to see debug messages
22 *
23 */
24
25#include <linux/module.h>
26#include <linux/kernel.h>
27#include <linux/sched.h>
28#include <linux/string.h>
29#include <linux/timer.h>
30#include <linux/delay.h>
31#include <linux/errno.h>
32#include <linux/slab.h>
33#include <linux/videodev2.h>
34#include <linux/i2c.h>
35#include <linux/init.h>
36#include <linux/kthread.h>
37#include <linux/freezer.h>
38
39#include <media/i2c/tvaudio.h>
40#include <media/v4l2-device.h>
41#include <media/v4l2-ctrls.h>
42
43/* ---------------------------------------------------------------------- */
44/* insmod args */
45
46static int debug; /* insmod parameter */
47module_param(debug, int, 0644);
48
49MODULE_DESCRIPTION("device driver for various i2c TV sound decoder / audiomux chips");
50MODULE_AUTHOR("Eric Sandeen, Steve VanDeBogart, Greg Alexander, Gerd Knorr");
51MODULE_LICENSE("GPL");
52
53#define UNSET (-1U)
54
55/* ---------------------------------------------------------------------- */
56/* our structs */
57
58#define MAXREGS 256
59
60struct CHIPSTATE;
61typedef int (*getvalue)(int);
62typedef int (*checkit)(struct CHIPSTATE*);
63typedef int (*initialize)(struct CHIPSTATE*);
64typedef int (*getrxsubchans)(struct CHIPSTATE *);
65typedef void (*setaudmode)(struct CHIPSTATE*, int mode);
66
67/* i2c command */
68typedef struct AUDIOCMD {
69 int count; /* # of bytes to send */
70 unsigned char bytes[MAXREGS+1]; /* addr, data, data, ... */
71} audiocmd;
72
73/* chip description */
74struct CHIPDESC {
75 char *name; /* chip name */
76 int addr_lo, addr_hi; /* i2c address range */
77 int registers; /* # of registers */
78
79 int *insmodopt;
80 checkit checkit;
81 initialize initialize;
82 int flags;
83#define CHIP_HAS_VOLUME 1
84#define CHIP_HAS_BASSTREBLE 2
85#define CHIP_HAS_INPUTSEL 4
86#define CHIP_NEED_CHECKMODE 8
87
88 /* various i2c command sequences */
89 audiocmd init;
90
91 /* which register has which value */
92 int leftreg, rightreg, treblereg, bassreg;
93
94 /* initialize with (defaults to 65535/32768/32768 */
95 int volinit, trebleinit, bassinit;
96
97 /* functions to convert the values (v4l -> chip) */
98 getvalue volfunc, treblefunc, bassfunc;
99
100 /* get/set mode */
101 getrxsubchans getrxsubchans;
102 setaudmode setaudmode;
103
104 /* input switch register + values for v4l inputs */
105 int inputreg;
106 int inputmap[4];
107 int inputmute;
108 int inputmask;
109};
110
111/* current state of the chip */
112struct CHIPSTATE {
113 struct v4l2_subdev sd;
114 struct v4l2_ctrl_handler hdl;
115 struct {
116 /* volume/balance cluster */
117 struct v4l2_ctrl *volume;
118 struct v4l2_ctrl *balance;
119 };
120
121 /* chip-specific description - should point to
122 an entry at CHIPDESC table */
123 struct CHIPDESC *desc;
124
125 /* shadow register set */
126 audiocmd shadow;
127
128 /* current settings */
129 u16 muted;
130 int prevmode;
131 int radio;
132 int input;
133
134 /* thread */
135 struct task_struct *thread;
136 struct timer_list wt;
137 int audmode;
138};
139
140static inline struct CHIPSTATE *to_state(struct v4l2_subdev *sd)
141{
142 return container_of(sd, struct CHIPSTATE, sd);
143}
144
145static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
146{
147 return &container_of(ctrl->handler, struct CHIPSTATE, hdl)->sd;
148}
149
150
151/* ---------------------------------------------------------------------- */
152/* i2c I/O functions */
153
154static int chip_write(struct CHIPSTATE *chip, int subaddr, int val)
155{
156 struct v4l2_subdev *sd = &chip->sd;
157 struct i2c_client *c = v4l2_get_subdevdata(sd);
158 unsigned char buffer[2];
159 int rc;
160
161 if (subaddr < 0) {
162 v4l2_dbg(1, debug, sd, "chip_write: 0x%x\n", val);
163 chip->shadow.bytes[1] = val;
164 buffer[0] = val;
165 rc = i2c_master_send(client: c, buf: buffer, count: 1);
166 if (rc != 1) {
167 v4l2_warn(sd, "I/O error (write 0x%x)\n", val);
168 if (rc < 0)
169 return rc;
170 return -EIO;
171 }
172 } else {
173 if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) {
174 v4l2_info(sd,
175 "Tried to access a non-existent register: %d\n",
176 subaddr);
177 return -EINVAL;
178 }
179
180 v4l2_dbg(1, debug, sd, "chip_write: reg%d=0x%x\n",
181 subaddr, val);
182 chip->shadow.bytes[subaddr+1] = val;
183 buffer[0] = subaddr;
184 buffer[1] = val;
185 rc = i2c_master_send(client: c, buf: buffer, count: 2);
186 if (rc != 2) {
187 v4l2_warn(sd, "I/O error (write reg%d=0x%x)\n",
188 subaddr, val);
189 if (rc < 0)
190 return rc;
191 return -EIO;
192 }
193 }
194 return 0;
195}
196
197static int chip_write_masked(struct CHIPSTATE *chip,
198 int subaddr, int val, int mask)
199{
200 struct v4l2_subdev *sd = &chip->sd;
201
202 if (mask != 0) {
203 if (subaddr < 0) {
204 val = (chip->shadow.bytes[1] & ~mask) | (val & mask);
205 } else {
206 if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) {
207 v4l2_info(sd,
208 "Tried to access a non-existent register: %d\n",
209 subaddr);
210 return -EINVAL;
211 }
212
213 val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask);
214 }
215 }
216 return chip_write(chip, subaddr, val);
217}
218
219static int chip_read(struct CHIPSTATE *chip)
220{
221 struct v4l2_subdev *sd = &chip->sd;
222 struct i2c_client *c = v4l2_get_subdevdata(sd);
223 unsigned char buffer;
224 int rc;
225
226 rc = i2c_master_recv(client: c, buf: &buffer, count: 1);
227 if (rc != 1) {
228 v4l2_warn(sd, "I/O error (read)\n");
229 if (rc < 0)
230 return rc;
231 return -EIO;
232 }
233 v4l2_dbg(1, debug, sd, "chip_read: 0x%x\n", buffer);
234 return buffer;
235}
236
237static int chip_read2(struct CHIPSTATE *chip, int subaddr)
238{
239 struct v4l2_subdev *sd = &chip->sd;
240 struct i2c_client *c = v4l2_get_subdevdata(sd);
241 int rc;
242 unsigned char write[1];
243 unsigned char read[1];
244 struct i2c_msg msgs[2] = {
245 {
246 .addr = c->addr,
247 .len = 1,
248 .buf = write
249 },
250 {
251 .addr = c->addr,
252 .flags = I2C_M_RD,
253 .len = 1,
254 .buf = read
255 }
256 };
257
258 write[0] = subaddr;
259
260 rc = i2c_transfer(adap: c->adapter, msgs, num: 2);
261 if (rc != 2) {
262 v4l2_warn(sd, "I/O error (read2)\n");
263 if (rc < 0)
264 return rc;
265 return -EIO;
266 }
267 v4l2_dbg(1, debug, sd, "chip_read2: reg%d=0x%x\n",
268 subaddr, read[0]);
269 return read[0];
270}
271
272static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd)
273{
274 struct v4l2_subdev *sd = &chip->sd;
275 struct i2c_client *c = v4l2_get_subdevdata(sd);
276 int i, rc;
277
278 if (0 == cmd->count)
279 return 0;
280
281 if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) {
282 v4l2_info(sd,
283 "Tried to access a non-existent register range: %d to %d\n",
284 cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1);
285 return -EINVAL;
286 }
287
288 /* FIXME: it seems that the shadow bytes are wrong below !*/
289
290 /* update our shadow register set; print bytes if (debug > 0) */
291 v4l2_dbg(1, debug, sd, "chip_cmd(%s): reg=%d, data:",
292 name, cmd->bytes[0]);
293 for (i = 1; i < cmd->count; i++) {
294 if (debug)
295 printk(KERN_CONT " 0x%x", cmd->bytes[i]);
296 chip->shadow.bytes[i+cmd->bytes[0]] = cmd->bytes[i];
297 }
298 if (debug)
299 printk(KERN_CONT "\n");
300
301 /* send data to the chip */
302 rc = i2c_master_send(client: c, buf: cmd->bytes, count: cmd->count);
303 if (rc != cmd->count) {
304 v4l2_warn(sd, "I/O error (%s)\n", name);
305 if (rc < 0)
306 return rc;
307 return -EIO;
308 }
309 return 0;
310}
311
312/* ---------------------------------------------------------------------- */
313/* kernel thread for doing i2c stuff asyncronly
314 * right now it is used only to check the audio mode (mono/stereo/whatever)
315 * some time after switching to another TV channel, then turn on stereo
316 * if available, ...
317 */
318
319static void chip_thread_wake(struct timer_list *t)
320{
321 struct CHIPSTATE *chip = from_timer(chip, t, wt);
322 wake_up_process(tsk: chip->thread);
323}
324
325static int chip_thread(void *data)
326{
327 struct CHIPSTATE *chip = data;
328 struct CHIPDESC *desc = chip->desc;
329 struct v4l2_subdev *sd = &chip->sd;
330 int mode, selected;
331
332 v4l2_dbg(1, debug, sd, "thread started\n");
333 set_freezable();
334 for (;;) {
335 set_current_state(TASK_INTERRUPTIBLE);
336 if (!kthread_should_stop())
337 schedule();
338 set_current_state(TASK_RUNNING);
339 try_to_freeze();
340 if (kthread_should_stop())
341 break;
342 v4l2_dbg(1, debug, sd, "thread wakeup\n");
343
344 /* don't do anything for radio */
345 if (chip->radio)
346 continue;
347
348 /* have a look what's going on */
349 mode = desc->getrxsubchans(chip);
350 if (mode == chip->prevmode)
351 continue;
352
353 /* chip detected a new audio mode - set it */
354 v4l2_dbg(1, debug, sd, "thread checkmode\n");
355
356 chip->prevmode = mode;
357
358 selected = V4L2_TUNER_MODE_MONO;
359 switch (chip->audmode) {
360 case V4L2_TUNER_MODE_MONO:
361 if (mode & V4L2_TUNER_SUB_LANG1)
362 selected = V4L2_TUNER_MODE_LANG1;
363 break;
364 case V4L2_TUNER_MODE_STEREO:
365 case V4L2_TUNER_MODE_LANG1:
366 if (mode & V4L2_TUNER_SUB_LANG1)
367 selected = V4L2_TUNER_MODE_LANG1;
368 else if (mode & V4L2_TUNER_SUB_STEREO)
369 selected = V4L2_TUNER_MODE_STEREO;
370 break;
371 case V4L2_TUNER_MODE_LANG2:
372 if (mode & V4L2_TUNER_SUB_LANG2)
373 selected = V4L2_TUNER_MODE_LANG2;
374 else if (mode & V4L2_TUNER_SUB_STEREO)
375 selected = V4L2_TUNER_MODE_STEREO;
376 break;
377 case V4L2_TUNER_MODE_LANG1_LANG2:
378 if (mode & V4L2_TUNER_SUB_LANG2)
379 selected = V4L2_TUNER_MODE_LANG1_LANG2;
380 else if (mode & V4L2_TUNER_SUB_STEREO)
381 selected = V4L2_TUNER_MODE_STEREO;
382 }
383 desc->setaudmode(chip, selected);
384
385 /* schedule next check */
386 mod_timer(timer: &chip->wt, expires: jiffies+msecs_to_jiffies(m: 2000));
387 }
388
389 v4l2_dbg(1, debug, sd, "thread exiting\n");
390 return 0;
391}
392
393/* ---------------------------------------------------------------------- */
394/* audio chip descriptions - defines+functions for tda9840 */
395
396#define TDA9840_SW 0x00
397#define TDA9840_LVADJ 0x02
398#define TDA9840_STADJ 0x03
399#define TDA9840_TEST 0x04
400
401#define TDA9840_MONO 0x10
402#define TDA9840_STEREO 0x2a
403#define TDA9840_DUALA 0x12
404#define TDA9840_DUALB 0x1e
405#define TDA9840_DUALAB 0x1a
406#define TDA9840_DUALBA 0x16
407#define TDA9840_EXTERNAL 0x7a
408
409#define TDA9840_DS_DUAL 0x20 /* Dual sound identified */
410#define TDA9840_ST_STEREO 0x40 /* Stereo sound identified */
411#define TDA9840_PONRES 0x80 /* Power-on reset detected if = 1 */
412
413#define TDA9840_TEST_INT1SN 0x1 /* Integration time 0.5s when set */
414#define TDA9840_TEST_INTFU 0x02 /* Disables integrator function */
415
416static int tda9840_getrxsubchans(struct CHIPSTATE *chip)
417{
418 struct v4l2_subdev *sd = &chip->sd;
419 int val, mode;
420
421 mode = V4L2_TUNER_SUB_MONO;
422
423 val = chip_read(chip);
424 if (val < 0)
425 return mode;
426
427 if (val & TDA9840_DS_DUAL)
428 mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
429 if (val & TDA9840_ST_STEREO)
430 mode = V4L2_TUNER_SUB_STEREO;
431
432 v4l2_dbg(1, debug, sd,
433 "tda9840_getrxsubchans(): raw chip read: %d, return: %d\n",
434 val, mode);
435 return mode;
436}
437
438static void tda9840_setaudmode(struct CHIPSTATE *chip, int mode)
439{
440 int update = 1;
441 int t = chip->shadow.bytes[TDA9840_SW + 1] & ~0x7e;
442
443 switch (mode) {
444 case V4L2_TUNER_MODE_MONO:
445 t |= TDA9840_MONO;
446 break;
447 case V4L2_TUNER_MODE_STEREO:
448 t |= TDA9840_STEREO;
449 break;
450 case V4L2_TUNER_MODE_LANG1:
451 t |= TDA9840_DUALA;
452 break;
453 case V4L2_TUNER_MODE_LANG2:
454 t |= TDA9840_DUALB;
455 break;
456 case V4L2_TUNER_MODE_LANG1_LANG2:
457 t |= TDA9840_DUALAB;
458 break;
459 default:
460 update = 0;
461 }
462
463 if (update)
464 chip_write(chip, TDA9840_SW, val: t);
465}
466
467static int tda9840_checkit(struct CHIPSTATE *chip)
468{
469 int rc;
470
471 rc = chip_read(chip);
472 if (rc < 0)
473 return 0;
474
475
476 /* lower 5 bits should be 0 */
477 return ((rc & 0x1f) == 0) ? 1 : 0;
478}
479
480/* ---------------------------------------------------------------------- */
481/* audio chip descriptions - defines+functions for tda985x */
482
483/* subaddresses for TDA9855 */
484#define TDA9855_VR 0x00 /* Volume, right */
485#define TDA9855_VL 0x01 /* Volume, left */
486#define TDA9855_BA 0x02 /* Bass */
487#define TDA9855_TR 0x03 /* Treble */
488#define TDA9855_SW 0x04 /* Subwoofer - not connected on DTV2000 */
489
490/* subaddresses for TDA9850 */
491#define TDA9850_C4 0x04 /* Control 1 for TDA9850 */
492
493/* subaddesses for both chips */
494#define TDA985x_C5 0x05 /* Control 2 for TDA9850, Control 1 for TDA9855 */
495#define TDA985x_C6 0x06 /* Control 3 for TDA9850, Control 2 for TDA9855 */
496#define TDA985x_C7 0x07 /* Control 4 for TDA9850, Control 3 for TDA9855 */
497#define TDA985x_A1 0x08 /* Alignment 1 for both chips */
498#define TDA985x_A2 0x09 /* Alignment 2 for both chips */
499#define TDA985x_A3 0x0a /* Alignment 3 for both chips */
500
501/* Masks for bits in TDA9855 subaddresses */
502/* 0x00 - VR in TDA9855 */
503/* 0x01 - VL in TDA9855 */
504/* lower 7 bits control gain from -71dB (0x28) to 16dB (0x7f)
505 * in 1dB steps - mute is 0x27 */
506
507
508/* 0x02 - BA in TDA9855 */
509/* lower 5 bits control bass gain from -12dB (0x06) to 16.5dB (0x19)
510 * in .5dB steps - 0 is 0x0E */
511
512
513/* 0x03 - TR in TDA9855 */
514/* 4 bits << 1 control treble gain from -12dB (0x3) to 12dB (0xb)
515 * in 3dB steps - 0 is 0x7 */
516
517/* Masks for bits in both chips' subaddresses */
518/* 0x04 - SW in TDA9855, C4/Control 1 in TDA9850 */
519/* Unique to TDA9855: */
520/* 4 bits << 2 control subwoofer/surround gain from -14db (0x1) to 14db (0xf)
521 * in 3dB steps - mute is 0x0 */
522
523/* Unique to TDA9850: */
524/* lower 4 bits control stereo noise threshold, over which stereo turns off
525 * set to values of 0x00 through 0x0f for Ster1 through Ster16 */
526
527
528/* 0x05 - C5 - Control 1 in TDA9855 , Control 2 in TDA9850*/
529/* Unique to TDA9855: */
530#define TDA9855_MUTE 1<<7 /* GMU, Mute at outputs */
531#define TDA9855_AVL 1<<6 /* AVL, Automatic Volume Level */
532#define TDA9855_LOUD 1<<5 /* Loudness, 1==off */
533#define TDA9855_SUR 1<<3 /* Surround / Subwoofer 1==.5(L-R) 0==.5(L+R) */
534 /* Bits 0 to 3 select various combinations
535 * of line in and line out, only the
536 * interesting ones are defined */
537#define TDA9855_EXT 1<<2 /* Selects inputs LIR and LIL. Pins 41 & 12 */
538#define TDA9855_INT 0 /* Selects inputs LOR and LOL. (internal) */
539
540/* Unique to TDA9850: */
541/* lower 4 bits control SAP noise threshold, over which SAP turns off
542 * set to values of 0x00 through 0x0f for SAP1 through SAP16 */
543
544
545/* 0x06 - C6 - Control 2 in TDA9855, Control 3 in TDA9850 */
546/* Common to TDA9855 and TDA9850: */
547#define TDA985x_SAP 3<<6 /* Selects SAP output, mute if not received */
548#define TDA985x_MONOSAP 2<<6 /* Selects Mono on left, SAP on right */
549#define TDA985x_STEREO 1<<6 /* Selects Stereo output, mono if not received */
550#define TDA985x_MONO 0 /* Forces Mono output */
551#define TDA985x_LMU 1<<3 /* Mute (LOR/LOL for 9855, OUTL/OUTR for 9850) */
552
553/* Unique to TDA9855: */
554#define TDA9855_TZCM 1<<5 /* If set, don't mute till zero crossing */
555#define TDA9855_VZCM 1<<4 /* If set, don't change volume till zero crossing*/
556#define TDA9855_LINEAR 0 /* Linear Stereo */
557#define TDA9855_PSEUDO 1 /* Pseudo Stereo */
558#define TDA9855_SPAT_30 2 /* Spatial Stereo, 30% anti-phase crosstalk */
559#define TDA9855_SPAT_50 3 /* Spatial Stereo, 52% anti-phase crosstalk */
560#define TDA9855_E_MONO 7 /* Forced mono - mono select elseware, so useless*/
561
562/* 0x07 - C7 - Control 3 in TDA9855, Control 4 in TDA9850 */
563/* Common to both TDA9855 and TDA9850: */
564/* lower 4 bits control input gain from -3.5dB (0x0) to 4dB (0xF)
565 * in .5dB steps - 0dB is 0x7 */
566
567/* 0x08, 0x09 - A1 and A2 (read/write) */
568/* Common to both TDA9855 and TDA9850: */
569/* lower 5 bites are wideband and spectral expander alignment
570 * from 0x00 to 0x1f - nominal at 0x0f and 0x10 (read/write) */
571#define TDA985x_STP 1<<5 /* Stereo Pilot/detect (read-only) */
572#define TDA985x_SAPP 1<<6 /* SAP Pilot/detect (read-only) */
573#define TDA985x_STS 1<<7 /* Stereo trigger 1= <35mV 0= <30mV (write-only)*/
574
575/* 0x0a - A3 */
576/* Common to both TDA9855 and TDA9850: */
577/* lower 3 bits control timing current for alignment: -30% (0x0), -20% (0x1),
578 * -10% (0x2), nominal (0x3), +10% (0x6), +20% (0x5), +30% (0x4) */
579#define TDA985x_ADJ 1<<7 /* Stereo adjust on/off (wideband and spectral */
580
581static int tda9855_volume(int val) { return val/0x2e8+0x27; }
582static int tda9855_bass(int val) { return val/0xccc+0x06; }
583static int tda9855_treble(int val) { return (val/0x1c71+0x3)<<1; }
584
585static int tda985x_getrxsubchans(struct CHIPSTATE *chip)
586{
587 int mode, val;
588
589 /* Add mono mode regardless of SAP and stereo */
590 /* Allows forced mono */
591 mode = V4L2_TUNER_SUB_MONO;
592 val = chip_read(chip);
593 if (val < 0)
594 return mode;
595
596 if (val & TDA985x_STP)
597 mode = V4L2_TUNER_SUB_STEREO;
598 if (val & TDA985x_SAPP)
599 mode |= V4L2_TUNER_SUB_SAP;
600 return mode;
601}
602
603static void tda985x_setaudmode(struct CHIPSTATE *chip, int mode)
604{
605 int update = 1;
606 int c6 = chip->shadow.bytes[TDA985x_C6+1] & 0x3f;
607
608 switch (mode) {
609 case V4L2_TUNER_MODE_MONO:
610 c6 |= TDA985x_MONO;
611 break;
612 case V4L2_TUNER_MODE_STEREO:
613 case V4L2_TUNER_MODE_LANG1:
614 c6 |= TDA985x_STEREO;
615 break;
616 case V4L2_TUNER_MODE_SAP:
617 c6 |= TDA985x_SAP;
618 break;
619 case V4L2_TUNER_MODE_LANG1_LANG2:
620 c6 |= TDA985x_MONOSAP;
621 break;
622 default:
623 update = 0;
624 }
625 if (update)
626 chip_write(chip,TDA985x_C6,val: c6);
627}
628
629
630/* ---------------------------------------------------------------------- */
631/* audio chip descriptions - defines+functions for tda9873h */
632
633/* Subaddresses for TDA9873H */
634
635#define TDA9873_SW 0x00 /* Switching */
636#define TDA9873_AD 0x01 /* Adjust */
637#define TDA9873_PT 0x02 /* Port */
638
639/* Subaddress 0x00: Switching Data
640 * B7..B0:
641 *
642 * B1, B0: Input source selection
643 * 0, 0 internal
644 * 1, 0 external stereo
645 * 0, 1 external mono
646 */
647#define TDA9873_INP_MASK 3
648#define TDA9873_INTERNAL 0
649#define TDA9873_EXT_STEREO 2
650#define TDA9873_EXT_MONO 1
651
652/* B3, B2: output signal select
653 * B4 : transmission mode
654 * 0, 0, 1 Mono
655 * 1, 0, 0 Stereo
656 * 1, 1, 1 Stereo (reversed channel)
657 * 0, 0, 0 Dual AB
658 * 0, 0, 1 Dual AA
659 * 0, 1, 0 Dual BB
660 * 0, 1, 1 Dual BA
661 */
662
663#define TDA9873_TR_MASK (7 << 2)
664#define TDA9873_TR_MONO 4
665#define TDA9873_TR_STEREO 1 << 4
666#define TDA9873_TR_REVERSE ((1 << 3) | (1 << 2))
667#define TDA9873_TR_DUALA 1 << 2
668#define TDA9873_TR_DUALB 1 << 3
669#define TDA9873_TR_DUALAB 0
670
671/* output level controls
672 * B5: output level switch (0 = reduced gain, 1 = normal gain)
673 * B6: mute (1 = muted)
674 * B7: auto-mute (1 = auto-mute enabled)
675 */
676
677#define TDA9873_GAIN_NORMAL 1 << 5
678#define TDA9873_MUTE 1 << 6
679#define TDA9873_AUTOMUTE 1 << 7
680
681/* Subaddress 0x01: Adjust/standard */
682
683/* Lower 4 bits (C3..C0) control stereo adjustment on R channel (-0.6 - +0.7 dB)
684 * Recommended value is +0 dB
685 */
686
687#define TDA9873_STEREO_ADJ 0x06 /* 0dB gain */
688
689/* Bits C6..C4 control FM stantard
690 * C6, C5, C4
691 * 0, 0, 0 B/G (PAL FM)
692 * 0, 0, 1 M
693 * 0, 1, 0 D/K(1)
694 * 0, 1, 1 D/K(2)
695 * 1, 0, 0 D/K(3)
696 * 1, 0, 1 I
697 */
698#define TDA9873_BG 0
699#define TDA9873_M 1
700#define TDA9873_DK1 2
701#define TDA9873_DK2 3
702#define TDA9873_DK3 4
703#define TDA9873_I 5
704
705/* C7 controls identification response time (1=fast/0=normal)
706 */
707#define TDA9873_IDR_NORM 0
708#define TDA9873_IDR_FAST 1 << 7
709
710
711/* Subaddress 0x02: Port data */
712
713/* E1, E0 free programmable ports P1/P2
714 0, 0 both ports low
715 0, 1 P1 high
716 1, 0 P2 high
717 1, 1 both ports high
718*/
719
720#define TDA9873_PORTS 3
721
722/* E2: test port */
723#define TDA9873_TST_PORT 1 << 2
724
725/* E5..E3 control mono output channel (together with transmission mode bit B4)
726 *
727 * E5 E4 E3 B4 OUTM
728 * 0 0 0 0 mono
729 * 0 0 1 0 DUAL B
730 * 0 1 0 1 mono (from stereo decoder)
731 */
732#define TDA9873_MOUT_MONO 0
733#define TDA9873_MOUT_FMONO 0
734#define TDA9873_MOUT_DUALA 0
735#define TDA9873_MOUT_DUALB 1 << 3
736#define TDA9873_MOUT_ST 1 << 4
737#define TDA9873_MOUT_EXTM ((1 << 4) | (1 << 3))
738#define TDA9873_MOUT_EXTL 1 << 5
739#define TDA9873_MOUT_EXTR ((1 << 5) | (1 << 3))
740#define TDA9873_MOUT_EXTLR ((1 << 5) | (1 << 4))
741#define TDA9873_MOUT_MUTE ((1 << 5) | (1 << 4) | (1 << 3))
742
743/* Status bits: (chip read) */
744#define TDA9873_PONR 0 /* Power-on reset detected if = 1 */
745#define TDA9873_STEREO 2 /* Stereo sound is identified */
746#define TDA9873_DUAL 4 /* Dual sound is identified */
747
748static int tda9873_getrxsubchans(struct CHIPSTATE *chip)
749{
750 struct v4l2_subdev *sd = &chip->sd;
751 int val,mode;
752
753 mode = V4L2_TUNER_SUB_MONO;
754
755 val = chip_read(chip);
756 if (val < 0)
757 return mode;
758
759 if (val & TDA9873_STEREO)
760 mode = V4L2_TUNER_SUB_STEREO;
761 if (val & TDA9873_DUAL)
762 mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
763 v4l2_dbg(1, debug, sd,
764 "tda9873_getrxsubchans(): raw chip read: %d, return: %d\n",
765 val, mode);
766 return mode;
767}
768
769static void tda9873_setaudmode(struct CHIPSTATE *chip, int mode)
770{
771 struct v4l2_subdev *sd = &chip->sd;
772 int sw_data = chip->shadow.bytes[TDA9873_SW+1] & ~ TDA9873_TR_MASK;
773 /* int adj_data = chip->shadow.bytes[TDA9873_AD+1] ; */
774
775 if ((sw_data & TDA9873_INP_MASK) != TDA9873_INTERNAL) {
776 v4l2_dbg(1, debug, sd,
777 "tda9873_setaudmode(): external input\n");
778 return;
779 }
780
781 v4l2_dbg(1, debug, sd,
782 "tda9873_setaudmode(): chip->shadow.bytes[%d] = %d\n",
783 TDA9873_SW+1, chip->shadow.bytes[TDA9873_SW+1]);
784 v4l2_dbg(1, debug, sd, "tda9873_setaudmode(): sw_data = %d\n",
785 sw_data);
786
787 switch (mode) {
788 case V4L2_TUNER_MODE_MONO:
789 sw_data |= TDA9873_TR_MONO;
790 break;
791 case V4L2_TUNER_MODE_STEREO:
792 sw_data |= TDA9873_TR_STEREO;
793 break;
794 case V4L2_TUNER_MODE_LANG1:
795 sw_data |= TDA9873_TR_DUALA;
796 break;
797 case V4L2_TUNER_MODE_LANG2:
798 sw_data |= TDA9873_TR_DUALB;
799 break;
800 case V4L2_TUNER_MODE_LANG1_LANG2:
801 sw_data |= TDA9873_TR_DUALAB;
802 break;
803 default:
804 return;
805 }
806
807 chip_write(chip, TDA9873_SW, val: sw_data);
808 v4l2_dbg(1, debug, sd,
809 "tda9873_setaudmode(): req. mode %d; chip_write: %d\n",
810 mode, sw_data);
811}
812
813static int tda9873_checkit(struct CHIPSTATE *chip)
814{
815 int rc;
816
817 rc = chip_read2(chip, subaddr: 254);
818 if (rc < 0)
819 return 0;
820 return (rc & ~0x1f) == 0x80;
821}
822
823
824/* ---------------------------------------------------------------------- */
825/* audio chip description - defines+functions for tda9874h and tda9874a */
826/* Dariusz Kowalewski <darekk@automex.pl> */
827
828/* Subaddresses for TDA9874H and TDA9874A (slave rx) */
829#define TDA9874A_AGCGR 0x00 /* AGC gain */
830#define TDA9874A_GCONR 0x01 /* general config */
831#define TDA9874A_MSR 0x02 /* monitor select */
832#define TDA9874A_C1FRA 0x03 /* carrier 1 freq. */
833#define TDA9874A_C1FRB 0x04 /* carrier 1 freq. */
834#define TDA9874A_C1FRC 0x05 /* carrier 1 freq. */
835#define TDA9874A_C2FRA 0x06 /* carrier 2 freq. */
836#define TDA9874A_C2FRB 0x07 /* carrier 2 freq. */
837#define TDA9874A_C2FRC 0x08 /* carrier 2 freq. */
838#define TDA9874A_DCR 0x09 /* demodulator config */
839#define TDA9874A_FMER 0x0a /* FM de-emphasis */
840#define TDA9874A_FMMR 0x0b /* FM dematrix */
841#define TDA9874A_C1OLAR 0x0c /* ch.1 output level adj. */
842#define TDA9874A_C2OLAR 0x0d /* ch.2 output level adj. */
843#define TDA9874A_NCONR 0x0e /* NICAM config */
844#define TDA9874A_NOLAR 0x0f /* NICAM output level adj. */
845#define TDA9874A_NLELR 0x10 /* NICAM lower error limit */
846#define TDA9874A_NUELR 0x11 /* NICAM upper error limit */
847#define TDA9874A_AMCONR 0x12 /* audio mute control */
848#define TDA9874A_SDACOSR 0x13 /* stereo DAC output select */
849#define TDA9874A_AOSR 0x14 /* analog output select */
850#define TDA9874A_DAICONR 0x15 /* digital audio interface config */
851#define TDA9874A_I2SOSR 0x16 /* I2S-bus output select */
852#define TDA9874A_I2SOLAR 0x17 /* I2S-bus output level adj. */
853#define TDA9874A_MDACOSR 0x18 /* mono DAC output select (tda9874a) */
854#define TDA9874A_ESP 0xFF /* easy standard progr. (tda9874a) */
855
856/* Subaddresses for TDA9874H and TDA9874A (slave tx) */
857#define TDA9874A_DSR 0x00 /* device status */
858#define TDA9874A_NSR 0x01 /* NICAM status */
859#define TDA9874A_NECR 0x02 /* NICAM error count */
860#define TDA9874A_DR1 0x03 /* add. data LSB */
861#define TDA9874A_DR2 0x04 /* add. data MSB */
862#define TDA9874A_LLRA 0x05 /* monitor level read-out LSB */
863#define TDA9874A_LLRB 0x06 /* monitor level read-out MSB */
864#define TDA9874A_SIFLR 0x07 /* SIF level */
865#define TDA9874A_TR2 252 /* test reg. 2 */
866#define TDA9874A_TR1 253 /* test reg. 1 */
867#define TDA9874A_DIC 254 /* device id. code */
868#define TDA9874A_SIC 255 /* software id. code */
869
870
871static int tda9874a_mode = 1; /* 0: A2, 1: NICAM */
872static int tda9874a_GCONR = 0xc0; /* default config. input pin: SIFSEL=0 */
873static int tda9874a_NCONR = 0x01; /* default NICAM config.: AMSEL=0,AMUTE=1 */
874static int tda9874a_ESP = 0x07; /* default standard: NICAM D/K */
875static int tda9874a_dic = -1; /* device id. code */
876
877/* insmod options for tda9874a */
878static unsigned int tda9874a_SIF = UNSET;
879static unsigned int tda9874a_AMSEL = UNSET;
880static unsigned int tda9874a_STD = UNSET;
881module_param(tda9874a_SIF, int, 0444);
882module_param(tda9874a_AMSEL, int, 0444);
883module_param(tda9874a_STD, int, 0444);
884
885/*
886 * initialization table for tda9874 decoder:
887 * - carrier 1 freq. registers (3 bytes)
888 * - carrier 2 freq. registers (3 bytes)
889 * - demudulator config register
890 * - FM de-emphasis register (slow identification mode)
891 * Note: frequency registers must be written in single i2c transfer.
892 */
893static struct tda9874a_MODES {
894 char *name;
895 audiocmd cmd;
896} tda9874a_modelist[9] = {
897 { "A2, B/G", /* default */
898 { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} },
899 { "A2, M (Korea)",
900 { 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} },
901 { "A2, D/K (1)",
902 { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x82,0x60,0x00, 0x00,0x00 }} },
903 { "A2, D/K (2)",
904 { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x8C,0x75,0x55, 0x00,0x00 }} },
905 { "A2, D/K (3)",
906 { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x77,0xA0,0x00, 0x00,0x00 }} },
907 { "NICAM, I",
908 { 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} },
909 { "NICAM, B/G",
910 { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} },
911 { "NICAM, D/K",
912 { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} },
913 { "NICAM, L",
914 { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} }
915};
916
917static int tda9874a_setup(struct CHIPSTATE *chip)
918{
919 struct v4l2_subdev *sd = &chip->sd;
920
921 chip_write(chip, TDA9874A_AGCGR, val: 0x00); /* 0 dB */
922 chip_write(chip, TDA9874A_GCONR, val: tda9874a_GCONR);
923 chip_write(chip, TDA9874A_MSR, val: (tda9874a_mode) ? 0x03:0x02);
924 if(tda9874a_dic == 0x11) {
925 chip_write(chip, TDA9874A_FMMR, val: 0x80);
926 } else { /* dic == 0x07 */
927 chip_cmd(chip,name: "tda9874_modelist",cmd: &tda9874a_modelist[tda9874a_STD].cmd);
928 chip_write(chip, TDA9874A_FMMR, val: 0x00);
929 }
930 chip_write(chip, TDA9874A_C1OLAR, val: 0x00); /* 0 dB */
931 chip_write(chip, TDA9874A_C2OLAR, val: 0x00); /* 0 dB */
932 chip_write(chip, TDA9874A_NCONR, val: tda9874a_NCONR);
933 chip_write(chip, TDA9874A_NOLAR, val: 0x00); /* 0 dB */
934 /* Note: If signal quality is poor you may want to change NICAM */
935 /* error limit registers (NLELR and NUELR) to some greater values. */
936 /* Then the sound would remain stereo, but won't be so clear. */
937 chip_write(chip, TDA9874A_NLELR, val: 0x14); /* default */
938 chip_write(chip, TDA9874A_NUELR, val: 0x50); /* default */
939
940 if(tda9874a_dic == 0x11) {
941 chip_write(chip, TDA9874A_AMCONR, val: 0xf9);
942 chip_write(chip, TDA9874A_SDACOSR, val: (tda9874a_mode) ? 0x81:0x80);
943 chip_write(chip, TDA9874A_AOSR, val: 0x80);
944 chip_write(chip, TDA9874A_MDACOSR, val: (tda9874a_mode) ? 0x82:0x80);
945 chip_write(chip, TDA9874A_ESP, val: tda9874a_ESP);
946 } else { /* dic == 0x07 */
947 chip_write(chip, TDA9874A_AMCONR, val: 0xfb);
948 chip_write(chip, TDA9874A_SDACOSR, val: (tda9874a_mode) ? 0x81:0x80);
949 chip_write(chip, TDA9874A_AOSR, val: 0x00); /* or 0x10 */
950 }
951 v4l2_dbg(1, debug, sd, "tda9874a_setup(): %s [0x%02X].\n",
952 tda9874a_modelist[tda9874a_STD].name,tda9874a_STD);
953 return 1;
954}
955
956static int tda9874a_getrxsubchans(struct CHIPSTATE *chip)
957{
958 struct v4l2_subdev *sd = &chip->sd;
959 int dsr,nsr,mode;
960 int necr; /* just for debugging */
961
962 mode = V4L2_TUNER_SUB_MONO;
963
964 dsr = chip_read2(chip, TDA9874A_DSR);
965 if (dsr < 0)
966 return mode;
967 nsr = chip_read2(chip, TDA9874A_NSR);
968 if (nsr < 0)
969 return mode;
970 necr = chip_read2(chip, TDA9874A_NECR);
971 if (necr < 0)
972 return mode;
973
974 /* need to store dsr/nsr somewhere */
975 chip->shadow.bytes[MAXREGS-2] = dsr;
976 chip->shadow.bytes[MAXREGS-1] = nsr;
977
978 if(tda9874a_mode) {
979 /* Note: DSR.RSSF and DSR.AMSTAT bits are also checked.
980 * If NICAM auto-muting is enabled, DSR.AMSTAT=1 indicates
981 * that sound has (temporarily) switched from NICAM to
982 * mono FM (or AM) on 1st sound carrier due to high NICAM bit
983 * error count. So in fact there is no stereo in this case :-(
984 * But changing the mode to V4L2_TUNER_MODE_MONO would switch
985 * external 4052 multiplexer in audio_hook().
986 */
987 if(nsr & 0x02) /* NSR.S/MB=1 */
988 mode = V4L2_TUNER_SUB_STEREO;
989 if(nsr & 0x01) /* NSR.D/SB=1 */
990 mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
991 } else {
992 if(dsr & 0x02) /* DSR.IDSTE=1 */
993 mode = V4L2_TUNER_SUB_STEREO;
994 if(dsr & 0x04) /* DSR.IDDUA=1 */
995 mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
996 }
997
998 v4l2_dbg(1, debug, sd,
999 "tda9874a_getrxsubchans(): DSR=0x%X, NSR=0x%X, NECR=0x%X, return: %d.\n",
1000 dsr, nsr, necr, mode);
1001 return mode;
1002}
1003
1004static void tda9874a_setaudmode(struct CHIPSTATE *chip, int mode)
1005{
1006 struct v4l2_subdev *sd = &chip->sd;
1007
1008 /* Disable/enable NICAM auto-muting (based on DSR.RSSF status bit). */
1009 /* If auto-muting is disabled, we can hear a signal of degrading quality. */
1010 if (tda9874a_mode) {
1011 if(chip->shadow.bytes[MAXREGS-2] & 0x20) /* DSR.RSSF=1 */
1012 tda9874a_NCONR &= 0xfe; /* enable */
1013 else
1014 tda9874a_NCONR |= 0x01; /* disable */
1015 chip_write(chip, TDA9874A_NCONR, val: tda9874a_NCONR);
1016 }
1017
1018 /* Note: TDA9874A supports automatic FM dematrixing (FMMR register)
1019 * and has auto-select function for audio output (AOSR register).
1020 * Old TDA9874H doesn't support these features.
1021 * TDA9874A also has additional mono output pin (OUTM), which
1022 * on same (all?) tv-cards is not used, anyway (as well as MONOIN).
1023 */
1024 if(tda9874a_dic == 0x11) {
1025 int aosr = 0x80;
1026 int mdacosr = (tda9874a_mode) ? 0x82:0x80;
1027
1028 switch(mode) {
1029 case V4L2_TUNER_MODE_MONO:
1030 case V4L2_TUNER_MODE_STEREO:
1031 break;
1032 case V4L2_TUNER_MODE_LANG1:
1033 aosr = 0x80; /* auto-select, dual A/A */
1034 mdacosr = (tda9874a_mode) ? 0x82:0x80;
1035 break;
1036 case V4L2_TUNER_MODE_LANG2:
1037 aosr = 0xa0; /* auto-select, dual B/B */
1038 mdacosr = (tda9874a_mode) ? 0x83:0x81;
1039 break;
1040 case V4L2_TUNER_MODE_LANG1_LANG2:
1041 aosr = 0x00; /* always route L to L and R to R */
1042 mdacosr = (tda9874a_mode) ? 0x82:0x80;
1043 break;
1044 default:
1045 return;
1046 }
1047 chip_write(chip, TDA9874A_AOSR, val: aosr);
1048 chip_write(chip, TDA9874A_MDACOSR, val: mdacosr);
1049
1050 v4l2_dbg(1, debug, sd,
1051 "tda9874a_setaudmode(): req. mode %d; AOSR=0x%X, MDACOSR=0x%X.\n",
1052 mode, aosr, mdacosr);
1053
1054 } else { /* dic == 0x07 */
1055 int fmmr,aosr;
1056
1057 switch(mode) {
1058 case V4L2_TUNER_MODE_MONO:
1059 fmmr = 0x00; /* mono */
1060 aosr = 0x10; /* A/A */
1061 break;
1062 case V4L2_TUNER_MODE_STEREO:
1063 if(tda9874a_mode) {
1064 fmmr = 0x00;
1065 aosr = 0x00; /* handled by NICAM auto-mute */
1066 } else {
1067 fmmr = (tda9874a_ESP == 1) ? 0x05 : 0x04; /* stereo */
1068 aosr = 0x00;
1069 }
1070 break;
1071 case V4L2_TUNER_MODE_LANG1:
1072 fmmr = 0x02; /* dual */
1073 aosr = 0x10; /* dual A/A */
1074 break;
1075 case V4L2_TUNER_MODE_LANG2:
1076 fmmr = 0x02; /* dual */
1077 aosr = 0x20; /* dual B/B */
1078 break;
1079 case V4L2_TUNER_MODE_LANG1_LANG2:
1080 fmmr = 0x02; /* dual */
1081 aosr = 0x00; /* dual A/B */
1082 break;
1083 default:
1084 return;
1085 }
1086 chip_write(chip, TDA9874A_FMMR, val: fmmr);
1087 chip_write(chip, TDA9874A_AOSR, val: aosr);
1088
1089 v4l2_dbg(1, debug, sd,
1090 "tda9874a_setaudmode(): req. mode %d; FMMR=0x%X, AOSR=0x%X.\n",
1091 mode, fmmr, aosr);
1092 }
1093}
1094
1095static int tda9874a_checkit(struct CHIPSTATE *chip)
1096{
1097 struct v4l2_subdev *sd = &chip->sd;
1098 int dic,sic; /* device id. and software id. codes */
1099
1100 dic = chip_read2(chip, TDA9874A_DIC);
1101 if (dic < 0)
1102 return 0;
1103 sic = chip_read2(chip, TDA9874A_SIC);
1104 if (sic < 0)
1105 return 0;
1106
1107 v4l2_dbg(1, debug, sd, "tda9874a_checkit(): DIC=0x%X, SIC=0x%X.\n", dic, sic);
1108
1109 if((dic == 0x11)||(dic == 0x07)) {
1110 v4l2_info(sd, "found tda9874%s.\n", (dic == 0x11) ? "a" : "h");
1111 tda9874a_dic = dic; /* remember device id. */
1112 return 1;
1113 }
1114 return 0; /* not found */
1115}
1116
1117static int tda9874a_initialize(struct CHIPSTATE *chip)
1118{
1119 if (tda9874a_SIF > 2)
1120 tda9874a_SIF = 1;
1121 if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist))
1122 tda9874a_STD = 0;
1123 if(tda9874a_AMSEL > 1)
1124 tda9874a_AMSEL = 0;
1125
1126 if(tda9874a_SIF == 1)
1127 tda9874a_GCONR = 0xc0; /* sound IF input 1 */
1128 else
1129 tda9874a_GCONR = 0xc1; /* sound IF input 2 */
1130
1131 tda9874a_ESP = tda9874a_STD;
1132 tda9874a_mode = (tda9874a_STD < 5) ? 0 : 1;
1133
1134 if(tda9874a_AMSEL == 0)
1135 tda9874a_NCONR = 0x01; /* auto-mute: analog mono input */
1136 else
1137 tda9874a_NCONR = 0x05; /* auto-mute: 1st carrier FM or AM */
1138
1139 tda9874a_setup(chip);
1140 return 0;
1141}
1142
1143/* ---------------------------------------------------------------------- */
1144/* audio chip description - defines+functions for tda9875 */
1145/* The TDA9875 is made by Philips Semiconductor
1146 * http://www.semiconductors.philips.com
1147 * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator
1148 *
1149 */
1150
1151/* subaddresses for TDA9875 */
1152#define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/
1153#define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */
1154#define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/
1155#define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/
1156
1157#define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/
1158#define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/
1159#define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/
1160#define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/
1161
1162#define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/
1163#define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/
1164#define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/
1165#define TDA9875_MVL 0x1a /* Main volume gauche */
1166#define TDA9875_MVR 0x1b /* Main volume droite */
1167#define TDA9875_MBA 0x1d /* Main Basse */
1168#define TDA9875_MTR 0x1e /* Main treble */
1169#define TDA9875_ACS 0x1f /* Auxiliary channel select (FM) 0b0000000*/
1170#define TDA9875_AVL 0x20 /* Auxiliary volume gauche */
1171#define TDA9875_AVR 0x21 /* Auxiliary volume droite */
1172#define TDA9875_ABA 0x22 /* Auxiliary Basse */
1173#define TDA9875_ATR 0x23 /* Auxiliary treble */
1174
1175#define TDA9875_MSR 0x02 /* Monitor select register */
1176#define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */
1177#define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */
1178#define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */
1179#define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */
1180#define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */
1181#define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */
1182#define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/
1183#define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/
1184#define TDA9875_FMAT 0x0b /* FM Matrix regirter*/
1185
1186/* values */
1187#define TDA9875_MUTE_ON 0xff /* general mute */
1188#define TDA9875_MUTE_OFF 0xcc /* general no mute */
1189
1190static int tda9875_initialize(struct CHIPSTATE *chip)
1191{
1192 chip_write(chip, TDA9875_CFG, val: 0xd0); /*reg de config 0 (reset)*/
1193 chip_write(chip, TDA9875_MSR, val: 0x03); /* Monitor 0b00000XXX*/
1194 chip_write(chip, TDA9875_C1MSB, val: 0x00); /*Car1(FM) MSB XMHz*/
1195 chip_write(chip, TDA9875_C1MIB, val: 0x00); /*Car1(FM) MIB XMHz*/
1196 chip_write(chip, TDA9875_C1LSB, val: 0x00); /*Car1(FM) LSB XMHz*/
1197 chip_write(chip, TDA9875_C2MSB, val: 0x00); /*Car2(NICAM) MSB XMHz*/
1198 chip_write(chip, TDA9875_C2MIB, val: 0x00); /*Car2(NICAM) MIB XMHz*/
1199 chip_write(chip, TDA9875_C2LSB, val: 0x00); /*Car2(NICAM) LSB XMHz*/
1200 chip_write(chip, TDA9875_DCR, val: 0x00); /*Demod config 0x00*/
1201 chip_write(chip, TDA9875_DEEM, val: 0x44); /*DE-Emph 0b0100 0100*/
1202 chip_write(chip, TDA9875_FMAT, val: 0x00); /*FM Matrix reg 0x00*/
1203 chip_write(chip, TDA9875_SC1, val: 0x00); /* SCART 1 (SC1)*/
1204 chip_write(chip, TDA9875_SC2, val: 0x01); /* SCART 2 (sc2)*/
1205
1206 chip_write(chip, TDA9875_CH1V, val: 0x10); /* Channel volume 1 mute*/
1207 chip_write(chip, TDA9875_CH2V, val: 0x10); /* Channel volume 2 mute */
1208 chip_write(chip, TDA9875_DACOS, val: 0x02); /* sig DAC i/o(in:nicam)*/
1209 chip_write(chip, TDA9875_ADCIS, val: 0x6f); /* sig ADC input(in:mono)*/
1210 chip_write(chip, TDA9875_LOSR, val: 0x00); /* line out (in:mono)*/
1211 chip_write(chip, TDA9875_AER, val: 0x00); /*06 Effect (AVL+PSEUDO) */
1212 chip_write(chip, TDA9875_MCS, val: 0x44); /* Main ch select (DAC) */
1213 chip_write(chip, TDA9875_MVL, val: 0x03); /* Vol Main left 10dB */
1214 chip_write(chip, TDA9875_MVR, val: 0x03); /* Vol Main right 10dB*/
1215 chip_write(chip, TDA9875_MBA, val: 0x00); /* Main Bass Main 0dB*/
1216 chip_write(chip, TDA9875_MTR, val: 0x00); /* Main Treble Main 0dB*/
1217 chip_write(chip, TDA9875_ACS, val: 0x44); /* Aux chan select (dac)*/
1218 chip_write(chip, TDA9875_AVL, val: 0x00); /* Vol Aux left 0dB*/
1219 chip_write(chip, TDA9875_AVR, val: 0x00); /* Vol Aux right 0dB*/
1220 chip_write(chip, TDA9875_ABA, val: 0x00); /* Aux Bass Main 0dB*/
1221 chip_write(chip, TDA9875_ATR, val: 0x00); /* Aux Aigus Main 0dB*/
1222
1223 chip_write(chip, TDA9875_MUT, val: 0xcc); /* General mute */
1224 return 0;
1225}
1226
1227static int tda9875_volume(int val) { return (unsigned char)(val / 602 - 84); }
1228static int tda9875_bass(int val) { return (unsigned char)(max(-12, val / 2115 - 15)); }
1229static int tda9875_treble(int val) { return (unsigned char)(val / 2622 - 12); }
1230
1231/* ----------------------------------------------------------------------- */
1232
1233
1234/* *********************** *
1235 * i2c interface functions *
1236 * *********************** */
1237
1238static int tda9875_checkit(struct CHIPSTATE *chip)
1239{
1240 struct v4l2_subdev *sd = &chip->sd;
1241 int dic, rev;
1242
1243 dic = chip_read2(chip, subaddr: 254);
1244 if (dic < 0)
1245 return 0;
1246 rev = chip_read2(chip, subaddr: 255);
1247 if (rev < 0)
1248 return 0;
1249
1250 if (dic == 0 || dic == 2) { /* tda9875 and tda9875A */
1251 v4l2_info(sd, "found tda9875%s rev. %d.\n",
1252 dic == 0 ? "" : "A", rev);
1253 return 1;
1254 }
1255 return 0;
1256}
1257
1258/* ---------------------------------------------------------------------- */
1259/* audio chip descriptions - defines+functions for tea6420 */
1260
1261#define TEA6300_VL 0x00 /* volume left */
1262#define TEA6300_VR 0x01 /* volume right */
1263#define TEA6300_BA 0x02 /* bass */
1264#define TEA6300_TR 0x03 /* treble */
1265#define TEA6300_FA 0x04 /* fader control */
1266#define TEA6300_S 0x05 /* switch register */
1267 /* values for those registers: */
1268#define TEA6300_S_SA 0x01 /* stereo A input */
1269#define TEA6300_S_SB 0x02 /* stereo B */
1270#define TEA6300_S_SC 0x04 /* stereo C */
1271#define TEA6300_S_GMU 0x80 /* general mute */
1272
1273#define TEA6320_V 0x00 /* volume (0-5)/loudness off (6)/zero crossing mute(7) */
1274#define TEA6320_FFR 0x01 /* fader front right (0-5) */
1275#define TEA6320_FFL 0x02 /* fader front left (0-5) */
1276#define TEA6320_FRR 0x03 /* fader rear right (0-5) */
1277#define TEA6320_FRL 0x04 /* fader rear left (0-5) */
1278#define TEA6320_BA 0x05 /* bass (0-4) */
1279#define TEA6320_TR 0x06 /* treble (0-4) */
1280#define TEA6320_S 0x07 /* switch register */
1281 /* values for those registers: */
1282#define TEA6320_S_SA 0x07 /* stereo A input */
1283#define TEA6320_S_SB 0x06 /* stereo B */
1284#define TEA6320_S_SC 0x05 /* stereo C */
1285#define TEA6320_S_SD 0x04 /* stereo D */
1286#define TEA6320_S_GMU 0x80 /* general mute */
1287
1288#define TEA6420_S_SA 0x00 /* stereo A input */
1289#define TEA6420_S_SB 0x01 /* stereo B */
1290#define TEA6420_S_SC 0x02 /* stereo C */
1291#define TEA6420_S_SD 0x03 /* stereo D */
1292#define TEA6420_S_SE 0x04 /* stereo E */
1293#define TEA6420_S_GMU 0x05 /* general mute */
1294
1295static int tea6300_shift10(int val) { return val >> 10; }
1296static int tea6300_shift12(int val) { return val >> 12; }
1297
1298/* Assumes 16bit input (values 0x3f to 0x0c are unique, values less than */
1299/* 0x0c mirror those immediately higher) */
1300static int tea6320_volume(int val) { return (val / (65535/(63-12)) + 12) & 0x3f; }
1301static int tea6320_shift11(int val) { return val >> 11; }
1302static int tea6320_initialize(struct CHIPSTATE * chip)
1303{
1304 chip_write(chip, TEA6320_FFR, val: 0x3f);
1305 chip_write(chip, TEA6320_FFL, val: 0x3f);
1306 chip_write(chip, TEA6320_FRR, val: 0x3f);
1307 chip_write(chip, TEA6320_FRL, val: 0x3f);
1308
1309 return 0;
1310}
1311
1312
1313/* ---------------------------------------------------------------------- */
1314/* audio chip descriptions - defines+functions for tda8425 */
1315
1316#define TDA8425_VL 0x00 /* volume left */
1317#define TDA8425_VR 0x01 /* volume right */
1318#define TDA8425_BA 0x02 /* bass */
1319#define TDA8425_TR 0x03 /* treble */
1320#define TDA8425_S1 0x08 /* switch functions */
1321 /* values for those registers: */
1322#define TDA8425_S1_OFF 0xEE /* audio off (mute on) */
1323#define TDA8425_S1_CH1 0xCE /* audio channel 1 (mute off) - "linear stereo" mode */
1324#define TDA8425_S1_CH2 0xCF /* audio channel 2 (mute off) - "linear stereo" mode */
1325#define TDA8425_S1_MU 0x20 /* mute bit */
1326#define TDA8425_S1_STEREO 0x18 /* stereo bits */
1327#define TDA8425_S1_STEREO_SPATIAL 0x18 /* spatial stereo */
1328#define TDA8425_S1_STEREO_LINEAR 0x08 /* linear stereo */
1329#define TDA8425_S1_STEREO_PSEUDO 0x10 /* pseudo stereo */
1330#define TDA8425_S1_STEREO_MONO 0x00 /* forced mono */
1331#define TDA8425_S1_ML 0x06 /* language selector */
1332#define TDA8425_S1_ML_SOUND_A 0x02 /* sound a */
1333#define TDA8425_S1_ML_SOUND_B 0x04 /* sound b */
1334#define TDA8425_S1_ML_STEREO 0x06 /* stereo */
1335#define TDA8425_S1_IS 0x01 /* channel selector */
1336
1337
1338static int tda8425_shift10(int val) { return (val >> 10) | 0xc0; }
1339static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; }
1340
1341static void tda8425_setaudmode(struct CHIPSTATE *chip, int mode)
1342{
1343 int s1 = chip->shadow.bytes[TDA8425_S1+1] & 0xe1;
1344
1345 switch (mode) {
1346 case V4L2_TUNER_MODE_LANG1:
1347 s1 |= TDA8425_S1_ML_SOUND_A;
1348 s1 |= TDA8425_S1_STEREO_PSEUDO;
1349 break;
1350 case V4L2_TUNER_MODE_LANG2:
1351 s1 |= TDA8425_S1_ML_SOUND_B;
1352 s1 |= TDA8425_S1_STEREO_PSEUDO;
1353 break;
1354 case V4L2_TUNER_MODE_LANG1_LANG2:
1355 s1 |= TDA8425_S1_ML_STEREO;
1356 s1 |= TDA8425_S1_STEREO_LINEAR;
1357 break;
1358 case V4L2_TUNER_MODE_MONO:
1359 s1 |= TDA8425_S1_ML_STEREO;
1360 s1 |= TDA8425_S1_STEREO_MONO;
1361 break;
1362 case V4L2_TUNER_MODE_STEREO:
1363 s1 |= TDA8425_S1_ML_STEREO;
1364 s1 |= TDA8425_S1_STEREO_SPATIAL;
1365 break;
1366 default:
1367 return;
1368 }
1369 chip_write(chip,TDA8425_S1,val: s1);
1370}
1371
1372
1373/* ---------------------------------------------------------------------- */
1374/* audio chip descriptions - defines+functions for pic16c54 (PV951) */
1375
1376/* the registers of 16C54, I2C sub address. */
1377#define PIC16C54_REG_KEY_CODE 0x01 /* Not use. */
1378#define PIC16C54_REG_MISC 0x02
1379
1380/* bit definition of the RESET register, I2C data. */
1381#define PIC16C54_MISC_RESET_REMOTE_CTL 0x01 /* bit 0, Reset to receive the key */
1382 /* code of remote controller */
1383#define PIC16C54_MISC_MTS_MAIN 0x02 /* bit 1 */
1384#define PIC16C54_MISC_MTS_SAP 0x04 /* bit 2 */
1385#define PIC16C54_MISC_MTS_BOTH 0x08 /* bit 3 */
1386#define PIC16C54_MISC_SND_MUTE 0x10 /* bit 4, Mute Audio(Line-in and Tuner) */
1387#define PIC16C54_MISC_SND_NOTMUTE 0x20 /* bit 5 */
1388#define PIC16C54_MISC_SWITCH_TUNER 0x40 /* bit 6 , Switch to Line-in */
1389#define PIC16C54_MISC_SWITCH_LINE 0x80 /* bit 7 , Switch to Tuner */
1390
1391/* ---------------------------------------------------------------------- */
1392/* audio chip descriptions - defines+functions for TA8874Z */
1393
1394/* write 1st byte */
1395#define TA8874Z_LED_STE 0x80
1396#define TA8874Z_LED_BIL 0x40
1397#define TA8874Z_LED_EXT 0x20
1398#define TA8874Z_MONO_SET 0x10
1399#define TA8874Z_MUTE 0x08
1400#define TA8874Z_F_MONO 0x04
1401#define TA8874Z_MODE_SUB 0x02
1402#define TA8874Z_MODE_MAIN 0x01
1403
1404/* write 2nd byte */
1405/*#define TA8874Z_TI 0x80 */ /* test mode */
1406#define TA8874Z_SEPARATION 0x3f
1407#define TA8874Z_SEPARATION_DEFAULT 0x10
1408
1409/* read */
1410#define TA8874Z_B1 0x80
1411#define TA8874Z_B0 0x40
1412#define TA8874Z_CHAG_FLAG 0x20
1413
1414/*
1415 * B1 B0
1416 * mono L H
1417 * stereo L L
1418 * BIL H L
1419 */
1420static int ta8874z_getrxsubchans(struct CHIPSTATE *chip)
1421{
1422 int val, mode;
1423
1424 mode = V4L2_TUNER_SUB_MONO;
1425
1426 val = chip_read(chip);
1427 if (val < 0)
1428 return mode;
1429
1430 if (val & TA8874Z_B1){
1431 mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
1432 }else if (!(val & TA8874Z_B0)){
1433 mode = V4L2_TUNER_SUB_STEREO;
1434 }
1435 /* v4l2_dbg(1, debug, &chip->sd,
1436 "ta8874z_getrxsubchans(): raw chip read: 0x%02x, return: 0x%02x\n",
1437 val, mode); */
1438 return mode;
1439}
1440
1441static audiocmd ta8874z_stereo = { 2, {0, TA8874Z_SEPARATION_DEFAULT}};
1442static audiocmd ta8874z_mono = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}};
1443static audiocmd ta8874z_main = {2, { 0, TA8874Z_SEPARATION_DEFAULT}};
1444static audiocmd ta8874z_sub = {2, { TA8874Z_MODE_SUB, TA8874Z_SEPARATION_DEFAULT}};
1445static audiocmd ta8874z_both = {2, { TA8874Z_MODE_MAIN | TA8874Z_MODE_SUB, TA8874Z_SEPARATION_DEFAULT}};
1446
1447static void ta8874z_setaudmode(struct CHIPSTATE *chip, int mode)
1448{
1449 struct v4l2_subdev *sd = &chip->sd;
1450 int update = 1;
1451 audiocmd *t = NULL;
1452
1453 v4l2_dbg(1, debug, sd, "ta8874z_setaudmode(): mode: 0x%02x\n", mode);
1454
1455 switch(mode){
1456 case V4L2_TUNER_MODE_MONO:
1457 t = &ta8874z_mono;
1458 break;
1459 case V4L2_TUNER_MODE_STEREO:
1460 t = &ta8874z_stereo;
1461 break;
1462 case V4L2_TUNER_MODE_LANG1:
1463 t = &ta8874z_main;
1464 break;
1465 case V4L2_TUNER_MODE_LANG2:
1466 t = &ta8874z_sub;
1467 break;
1468 case V4L2_TUNER_MODE_LANG1_LANG2:
1469 t = &ta8874z_both;
1470 break;
1471 default:
1472 update = 0;
1473 }
1474
1475 if(update)
1476 chip_cmd(chip, name: "TA8874Z", cmd: t);
1477}
1478
1479static int ta8874z_checkit(struct CHIPSTATE *chip)
1480{
1481 int rc;
1482
1483 rc = chip_read(chip);
1484 if (rc < 0)
1485 return rc;
1486
1487 return ((rc & 0x1f) == 0x1f) ? 1 : 0;
1488}
1489
1490/* ---------------------------------------------------------------------- */
1491/* audio chip descriptions - struct CHIPDESC */
1492
1493/* insmod options to enable/disable individual audio chips */
1494static int tda8425 = 1;
1495static int tda9840 = 1;
1496static int tda9850 = 1;
1497static int tda9855 = 1;
1498static int tda9873 = 1;
1499static int tda9874a = 1;
1500static int tda9875 = 1;
1501static int tea6300; /* default 0 - address clash with msp34xx */
1502static int tea6320; /* default 0 - address clash with msp34xx */
1503static int tea6420 = 1;
1504static int pic16c54 = 1;
1505static int ta8874z; /* default 0 - address clash with tda9840 */
1506
1507module_param(tda8425, int, 0444);
1508module_param(tda9840, int, 0444);
1509module_param(tda9850, int, 0444);
1510module_param(tda9855, int, 0444);
1511module_param(tda9873, int, 0444);
1512module_param(tda9874a, int, 0444);
1513module_param(tda9875, int, 0444);
1514module_param(tea6300, int, 0444);
1515module_param(tea6320, int, 0444);
1516module_param(tea6420, int, 0444);
1517module_param(pic16c54, int, 0444);
1518module_param(ta8874z, int, 0444);
1519
1520static struct CHIPDESC chiplist[] = {
1521 {
1522 .name = "tda9840",
1523 .insmodopt = &tda9840,
1524 .addr_lo = I2C_ADDR_TDA9840 >> 1,
1525 .addr_hi = I2C_ADDR_TDA9840 >> 1,
1526 .registers = 5,
1527 .flags = CHIP_NEED_CHECKMODE,
1528
1529 /* callbacks */
1530 .checkit = tda9840_checkit,
1531 .getrxsubchans = tda9840_getrxsubchans,
1532 .setaudmode = tda9840_setaudmode,
1533
1534 .init = { .count: 2, .bytes: { TDA9840_TEST, TDA9840_TEST_INT1SN
1535 /* ,TDA9840_SW, TDA9840_MONO */} }
1536 },
1537 {
1538 .name = "tda9873h",
1539 .insmodopt = &tda9873,
1540 .addr_lo = I2C_ADDR_TDA985x_L >> 1,
1541 .addr_hi = I2C_ADDR_TDA985x_H >> 1,
1542 .registers = 3,
1543 .flags = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE,
1544
1545 /* callbacks */
1546 .checkit = tda9873_checkit,
1547 .getrxsubchans = tda9873_getrxsubchans,
1548 .setaudmode = tda9873_setaudmode,
1549
1550 .init = { .count: 4, .bytes: { TDA9873_SW, 0xa4, 0x06, 0x03 } },
1551 .inputreg = TDA9873_SW,
1552 .inputmute = TDA9873_MUTE | TDA9873_AUTOMUTE,
1553 .inputmap = {0xa0, 0xa2, 0xa0, 0xa0},
1554 .inputmask = TDA9873_INP_MASK|TDA9873_MUTE|TDA9873_AUTOMUTE,
1555
1556 },
1557 {
1558 .name = "tda9874h/a",
1559 .insmodopt = &tda9874a,
1560 .addr_lo = I2C_ADDR_TDA9874 >> 1,
1561 .addr_hi = I2C_ADDR_TDA9874 >> 1,
1562 .flags = CHIP_NEED_CHECKMODE,
1563
1564 /* callbacks */
1565 .initialize = tda9874a_initialize,
1566 .checkit = tda9874a_checkit,
1567 .getrxsubchans = tda9874a_getrxsubchans,
1568 .setaudmode = tda9874a_setaudmode,
1569 },
1570 {
1571 .name = "tda9875",
1572 .insmodopt = &tda9875,
1573 .addr_lo = I2C_ADDR_TDA9875 >> 1,
1574 .addr_hi = I2C_ADDR_TDA9875 >> 1,
1575 .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE,
1576
1577 /* callbacks */
1578 .initialize = tda9875_initialize,
1579 .checkit = tda9875_checkit,
1580 .volfunc = tda9875_volume,
1581 .bassfunc = tda9875_bass,
1582 .treblefunc = tda9875_treble,
1583 .leftreg = TDA9875_MVL,
1584 .rightreg = TDA9875_MVR,
1585 .bassreg = TDA9875_MBA,
1586 .treblereg = TDA9875_MTR,
1587 .volinit = 58880,
1588 },
1589 {
1590 .name = "tda9850",
1591 .insmodopt = &tda9850,
1592 .addr_lo = I2C_ADDR_TDA985x_L >> 1,
1593 .addr_hi = I2C_ADDR_TDA985x_H >> 1,
1594 .registers = 11,
1595
1596 .getrxsubchans = tda985x_getrxsubchans,
1597 .setaudmode = tda985x_setaudmode,
1598
1599 .init = { .count: 8, .bytes: { TDA9850_C4, 0x08, 0x08, TDA985x_STEREO, 0x07, 0x10, 0x10, 0x03 } }
1600 },
1601 {
1602 .name = "tda9855",
1603 .insmodopt = &tda9855,
1604 .addr_lo = I2C_ADDR_TDA985x_L >> 1,
1605 .addr_hi = I2C_ADDR_TDA985x_H >> 1,
1606 .registers = 11,
1607 .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE,
1608
1609 .leftreg = TDA9855_VL,
1610 .rightreg = TDA9855_VR,
1611 .bassreg = TDA9855_BA,
1612 .treblereg = TDA9855_TR,
1613
1614 /* callbacks */
1615 .volfunc = tda9855_volume,
1616 .bassfunc = tda9855_bass,
1617 .treblefunc = tda9855_treble,
1618 .getrxsubchans = tda985x_getrxsubchans,
1619 .setaudmode = tda985x_setaudmode,
1620
1621 .init = { .count: 12, .bytes: { 0, 0x6f, 0x6f, 0x0e, 0x07<<1, 0x8<<2,
1622 TDA9855_MUTE | TDA9855_AVL | TDA9855_LOUD | TDA9855_INT,
1623 TDA985x_STEREO | TDA9855_LINEAR | TDA9855_TZCM | TDA9855_VZCM,
1624 0x07, 0x10, 0x10, 0x03 }}
1625 },
1626 {
1627 .name = "tea6300",
1628 .insmodopt = &tea6300,
1629 .addr_lo = I2C_ADDR_TEA6300 >> 1,
1630 .addr_hi = I2C_ADDR_TEA6300 >> 1,
1631 .registers = 6,
1632 .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
1633
1634 .leftreg = TEA6300_VR,
1635 .rightreg = TEA6300_VL,
1636 .bassreg = TEA6300_BA,
1637 .treblereg = TEA6300_TR,
1638
1639 /* callbacks */
1640 .volfunc = tea6300_shift10,
1641 .bassfunc = tea6300_shift12,
1642 .treblefunc = tea6300_shift12,
1643
1644 .inputreg = TEA6300_S,
1645 .inputmap = { TEA6300_S_SA, TEA6300_S_SB, TEA6300_S_SC },
1646 .inputmute = TEA6300_S_GMU,
1647 },
1648 {
1649 .name = "tea6320",
1650 .insmodopt = &tea6320,
1651 .addr_lo = I2C_ADDR_TEA6300 >> 1,
1652 .addr_hi = I2C_ADDR_TEA6300 >> 1,
1653 .registers = 8,
1654 .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
1655
1656 .leftreg = TEA6320_V,
1657 .rightreg = TEA6320_V,
1658 .bassreg = TEA6320_BA,
1659 .treblereg = TEA6320_TR,
1660
1661 /* callbacks */
1662 .initialize = tea6320_initialize,
1663 .volfunc = tea6320_volume,
1664 .bassfunc = tea6320_shift11,
1665 .treblefunc = tea6320_shift11,
1666
1667 .inputreg = TEA6320_S,
1668 .inputmap = { TEA6320_S_SA, TEA6420_S_SB, TEA6300_S_SC, TEA6320_S_SD },
1669 .inputmute = TEA6300_S_GMU,
1670 },
1671 {
1672 .name = "tea6420",
1673 .insmodopt = &tea6420,
1674 .addr_lo = I2C_ADDR_TEA6420 >> 1,
1675 .addr_hi = I2C_ADDR_TEA6420 >> 1,
1676 .registers = 1,
1677 .flags = CHIP_HAS_INPUTSEL,
1678
1679 .inputreg = -1,
1680 .inputmap = { TEA6420_S_SA, TEA6420_S_SB, TEA6420_S_SC },
1681 .inputmute = TEA6420_S_GMU,
1682 .inputmask = 0x07,
1683 },
1684 {
1685 .name = "tda8425",
1686 .insmodopt = &tda8425,
1687 .addr_lo = I2C_ADDR_TDA8425 >> 1,
1688 .addr_hi = I2C_ADDR_TDA8425 >> 1,
1689 .registers = 9,
1690 .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
1691
1692 .leftreg = TDA8425_VL,
1693 .rightreg = TDA8425_VR,
1694 .bassreg = TDA8425_BA,
1695 .treblereg = TDA8425_TR,
1696
1697 /* callbacks */
1698 .volfunc = tda8425_shift10,
1699 .bassfunc = tda8425_shift12,
1700 .treblefunc = tda8425_shift12,
1701 .setaudmode = tda8425_setaudmode,
1702
1703 .inputreg = TDA8425_S1,
1704 .inputmap = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 },
1705 .inputmute = TDA8425_S1_OFF,
1706
1707 },
1708 {
1709 .name = "pic16c54 (PV951)",
1710 .insmodopt = &pic16c54,
1711 .addr_lo = I2C_ADDR_PIC16C54 >> 1,
1712 .addr_hi = I2C_ADDR_PIC16C54>> 1,
1713 .registers = 2,
1714 .flags = CHIP_HAS_INPUTSEL,
1715
1716 .inputreg = PIC16C54_REG_MISC,
1717 .inputmap = {PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_TUNER,
1718 PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE,
1719 PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE,
1720 PIC16C54_MISC_SND_MUTE},
1721 .inputmute = PIC16C54_MISC_SND_MUTE,
1722 },
1723 {
1724 .name = "ta8874z",
1725 .checkit = ta8874z_checkit,
1726 .insmodopt = &ta8874z,
1727 .addr_lo = I2C_ADDR_TDA9840 >> 1,
1728 .addr_hi = I2C_ADDR_TDA9840 >> 1,
1729 .registers = 2,
1730
1731 /* callbacks */
1732 .getrxsubchans = ta8874z_getrxsubchans,
1733 .setaudmode = ta8874z_setaudmode,
1734
1735 .init = {.count: 2, .bytes: { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}},
1736 },
1737 { .name = NULL } /* EOF */
1738};
1739
1740
1741/* ---------------------------------------------------------------------- */
1742
1743static int tvaudio_s_ctrl(struct v4l2_ctrl *ctrl)
1744{
1745 struct v4l2_subdev *sd = to_sd(ctrl);
1746 struct CHIPSTATE *chip = to_state(sd);
1747 struct CHIPDESC *desc = chip->desc;
1748
1749 switch (ctrl->id) {
1750 case V4L2_CID_AUDIO_MUTE:
1751 chip->muted = ctrl->val;
1752 if (chip->muted)
1753 chip_write_masked(chip,subaddr: desc->inputreg,val: desc->inputmute,mask: desc->inputmask);
1754 else
1755 chip_write_masked(chip,subaddr: desc->inputreg,
1756 val: desc->inputmap[chip->input],mask: desc->inputmask);
1757 return 0;
1758 case V4L2_CID_AUDIO_VOLUME: {
1759 u32 volume, balance;
1760 u32 left, right;
1761
1762 volume = chip->volume->val;
1763 balance = chip->balance->val;
1764 left = (min(65536U - balance, 32768U) * volume) / 32768U;
1765 right = (min(balance, 32768U) * volume) / 32768U;
1766
1767 chip_write(chip, subaddr: desc->leftreg, val: desc->volfunc(left));
1768 chip_write(chip, subaddr: desc->rightreg, val: desc->volfunc(right));
1769 return 0;
1770 }
1771 case V4L2_CID_AUDIO_BASS:
1772 chip_write(chip, subaddr: desc->bassreg, val: desc->bassfunc(ctrl->val));
1773 return 0;
1774 case V4L2_CID_AUDIO_TREBLE:
1775 chip_write(chip, subaddr: desc->treblereg, val: desc->treblefunc(ctrl->val));
1776 return 0;
1777 }
1778 return -EINVAL;
1779}
1780
1781
1782/* ---------------------------------------------------------------------- */
1783/* video4linux interface */
1784
1785static int tvaudio_s_radio(struct v4l2_subdev *sd)
1786{
1787 struct CHIPSTATE *chip = to_state(sd);
1788
1789 chip->radio = 1;
1790 /* del_timer(&chip->wt); */
1791 return 0;
1792}
1793
1794static int tvaudio_s_routing(struct v4l2_subdev *sd,
1795 u32 input, u32 output, u32 config)
1796{
1797 struct CHIPSTATE *chip = to_state(sd);
1798 struct CHIPDESC *desc = chip->desc;
1799
1800 if (!(desc->flags & CHIP_HAS_INPUTSEL))
1801 return 0;
1802 if (input >= 4)
1803 return -EINVAL;
1804 /* There are four inputs: tuner, radio, extern and intern. */
1805 chip->input = input;
1806 if (chip->muted)
1807 return 0;
1808 chip_write_masked(chip, subaddr: desc->inputreg,
1809 val: desc->inputmap[chip->input], mask: desc->inputmask);
1810 return 0;
1811}
1812
1813static int tvaudio_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt)
1814{
1815 struct CHIPSTATE *chip = to_state(sd);
1816 struct CHIPDESC *desc = chip->desc;
1817
1818 if (!desc->setaudmode)
1819 return 0;
1820 if (chip->radio)
1821 return 0;
1822
1823 switch (vt->audmode) {
1824 case V4L2_TUNER_MODE_MONO:
1825 case V4L2_TUNER_MODE_STEREO:
1826 case V4L2_TUNER_MODE_LANG1:
1827 case V4L2_TUNER_MODE_LANG2:
1828 case V4L2_TUNER_MODE_LANG1_LANG2:
1829 break;
1830 default:
1831 return -EINVAL;
1832 }
1833 chip->audmode = vt->audmode;
1834
1835 if (chip->thread)
1836 wake_up_process(tsk: chip->thread);
1837 else
1838 desc->setaudmode(chip, vt->audmode);
1839
1840 return 0;
1841}
1842
1843static int tvaudio_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
1844{
1845 struct CHIPSTATE *chip = to_state(sd);
1846 struct CHIPDESC *desc = chip->desc;
1847
1848 if (!desc->getrxsubchans)
1849 return 0;
1850 if (chip->radio)
1851 return 0;
1852
1853 vt->audmode = chip->audmode;
1854 vt->rxsubchans = desc->getrxsubchans(chip);
1855 vt->capability |= V4L2_TUNER_CAP_STEREO |
1856 V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
1857
1858 return 0;
1859}
1860
1861static int tvaudio_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
1862{
1863 struct CHIPSTATE *chip = to_state(sd);
1864
1865 chip->radio = 0;
1866 return 0;
1867}
1868
1869static int tvaudio_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *freq)
1870{
1871 struct CHIPSTATE *chip = to_state(sd);
1872 struct CHIPDESC *desc = chip->desc;
1873
1874 /* For chips that provide getrxsubchans and setaudmode, and doesn't
1875 automatically follows the stereo carrier, a kthread is
1876 created to set the audio standard. In this case, when then
1877 the video channel is changed, tvaudio starts on MONO mode.
1878 After waiting for 2 seconds, the kernel thread is called,
1879 to follow whatever audio standard is pointed by the
1880 audio carrier.
1881 */
1882 if (chip->thread) {
1883 desc->setaudmode(chip, V4L2_TUNER_MODE_MONO);
1884 chip->prevmode = -1; /* reset previous mode */
1885 mod_timer(timer: &chip->wt, expires: jiffies+msecs_to_jiffies(m: 2000));
1886 }
1887 return 0;
1888}
1889
1890static int tvaudio_log_status(struct v4l2_subdev *sd)
1891{
1892 struct CHIPSTATE *chip = to_state(sd);
1893 struct CHIPDESC *desc = chip->desc;
1894
1895 v4l2_info(sd, "Chip: %s\n", desc->name);
1896 v4l2_ctrl_handler_log_status(hdl: &chip->hdl, prefix: sd->name);
1897 return 0;
1898}
1899
1900/* ----------------------------------------------------------------------- */
1901
1902static const struct v4l2_ctrl_ops tvaudio_ctrl_ops = {
1903 .s_ctrl = tvaudio_s_ctrl,
1904};
1905
1906static const struct v4l2_subdev_core_ops tvaudio_core_ops = {
1907 .log_status = tvaudio_log_status,
1908};
1909
1910static const struct v4l2_subdev_tuner_ops tvaudio_tuner_ops = {
1911 .s_radio = tvaudio_s_radio,
1912 .s_frequency = tvaudio_s_frequency,
1913 .s_tuner = tvaudio_s_tuner,
1914 .g_tuner = tvaudio_g_tuner,
1915};
1916
1917static const struct v4l2_subdev_audio_ops tvaudio_audio_ops = {
1918 .s_routing = tvaudio_s_routing,
1919};
1920
1921static const struct v4l2_subdev_video_ops tvaudio_video_ops = {
1922 .s_std = tvaudio_s_std,
1923};
1924
1925static const struct v4l2_subdev_ops tvaudio_ops = {
1926 .core = &tvaudio_core_ops,
1927 .tuner = &tvaudio_tuner_ops,
1928 .audio = &tvaudio_audio_ops,
1929 .video = &tvaudio_video_ops,
1930};
1931
1932/* ----------------------------------------------------------------------- */
1933
1934
1935/* i2c registration */
1936
1937static int tvaudio_probe(struct i2c_client *client)
1938{
1939 const struct i2c_device_id *id = i2c_client_get_device_id(client);
1940 struct CHIPSTATE *chip;
1941 struct CHIPDESC *desc;
1942 struct v4l2_subdev *sd;
1943
1944 if (debug) {
1945 printk(KERN_INFO "tvaudio: TV audio decoder + audio/video mux driver\n");
1946 printk(KERN_INFO "tvaudio: known chips: ");
1947 for (desc = chiplist; desc->name != NULL; desc++)
1948 printk(KERN_CONT "%s%s",
1949 (desc == chiplist) ? "" : ", ", desc->name);
1950 printk(KERN_CONT "\n");
1951 }
1952
1953 chip = devm_kzalloc(dev: &client->dev, size: sizeof(*chip), GFP_KERNEL);
1954 if (!chip)
1955 return -ENOMEM;
1956 sd = &chip->sd;
1957 v4l2_i2c_subdev_init(sd, client, ops: &tvaudio_ops);
1958
1959 /* find description for the chip */
1960 v4l2_dbg(1, debug, sd, "chip found @ 0x%x\n", client->addr<<1);
1961 for (desc = chiplist; desc->name != NULL; desc++) {
1962 if (0 == *(desc->insmodopt))
1963 continue;
1964 if (client->addr < desc->addr_lo ||
1965 client->addr > desc->addr_hi)
1966 continue;
1967 if (desc->checkit && !desc->checkit(chip))
1968 continue;
1969 break;
1970 }
1971 if (desc->name == NULL) {
1972 v4l2_dbg(1, debug, sd, "no matching chip description found\n");
1973 return -EIO;
1974 }
1975 v4l2_info(sd, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name);
1976 if (desc->flags) {
1977 v4l2_dbg(1, debug, sd, "matches:%s%s%s.\n",
1978 (desc->flags & CHIP_HAS_VOLUME) ? " volume" : "",
1979 (desc->flags & CHIP_HAS_BASSTREBLE) ? " bass/treble" : "",
1980 (desc->flags & CHIP_HAS_INPUTSEL) ? " audiomux" : "");
1981 }
1982
1983 /* fill required data structures */
1984 if (!id)
1985 strscpy(client->name, desc->name, I2C_NAME_SIZE);
1986 chip->desc = desc;
1987 chip->shadow.count = desc->registers+1;
1988 chip->prevmode = -1;
1989 chip->audmode = V4L2_TUNER_MODE_LANG1;
1990
1991 /* initialization */
1992 if (desc->initialize != NULL)
1993 desc->initialize(chip);
1994 else
1995 chip_cmd(chip, name: "init", cmd: &desc->init);
1996
1997 v4l2_ctrl_handler_init(&chip->hdl, 5);
1998 if (desc->flags & CHIP_HAS_INPUTSEL)
1999 v4l2_ctrl_new_std(hdl: &chip->hdl, ops: &tvaudio_ctrl_ops,
2000 V4L2_CID_AUDIO_MUTE, min: 0, max: 1, step: 1, def: 0);
2001 if (desc->flags & CHIP_HAS_VOLUME) {
2002 if (!desc->volfunc) {
2003 /* This shouldn't be happen. Warn user, but keep working
2004 without volume controls
2005 */
2006 v4l2_info(sd, "volume callback undefined!\n");
2007 desc->flags &= ~CHIP_HAS_VOLUME;
2008 } else {
2009 chip->volume = v4l2_ctrl_new_std(hdl: &chip->hdl,
2010 ops: &tvaudio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
2011 min: 0, max: 65535, step: 65535 / 100,
2012 def: desc->volinit ? desc->volinit : 65535);
2013 chip->balance = v4l2_ctrl_new_std(hdl: &chip->hdl,
2014 ops: &tvaudio_ctrl_ops, V4L2_CID_AUDIO_BALANCE,
2015 min: 0, max: 65535, step: 65535 / 100, def: 32768);
2016 v4l2_ctrl_cluster(ncontrols: 2, controls: &chip->volume);
2017 }
2018 }
2019 if (desc->flags & CHIP_HAS_BASSTREBLE) {
2020 if (!desc->bassfunc || !desc->treblefunc) {
2021 /* This shouldn't be happen. Warn user, but keep working
2022 without bass/treble controls
2023 */
2024 v4l2_info(sd, "bass/treble callbacks undefined!\n");
2025 desc->flags &= ~CHIP_HAS_BASSTREBLE;
2026 } else {
2027 v4l2_ctrl_new_std(hdl: &chip->hdl,
2028 ops: &tvaudio_ctrl_ops, V4L2_CID_AUDIO_BASS,
2029 min: 0, max: 65535, step: 65535 / 100,
2030 def: desc->bassinit ? desc->bassinit : 32768);
2031 v4l2_ctrl_new_std(hdl: &chip->hdl,
2032 ops: &tvaudio_ctrl_ops, V4L2_CID_AUDIO_TREBLE,
2033 min: 0, max: 65535, step: 65535 / 100,
2034 def: desc->trebleinit ? desc->trebleinit : 32768);
2035 }
2036 }
2037
2038 sd->ctrl_handler = &chip->hdl;
2039 if (chip->hdl.error) {
2040 int err = chip->hdl.error;
2041
2042 v4l2_ctrl_handler_free(hdl: &chip->hdl);
2043 return err;
2044 }
2045 /* set controls to the default values */
2046 v4l2_ctrl_handler_setup(hdl: &chip->hdl);
2047
2048 chip->thread = NULL;
2049 timer_setup(&chip->wt, chip_thread_wake, 0);
2050 if (desc->flags & CHIP_NEED_CHECKMODE) {
2051 if (!desc->getrxsubchans || !desc->setaudmode) {
2052 /* This shouldn't be happen. Warn user, but keep working
2053 without kthread
2054 */
2055 v4l2_info(sd, "set/get mode callbacks undefined!\n");
2056 return 0;
2057 }
2058 /* start async thread */
2059 chip->thread = kthread_run(chip_thread, chip, "%s",
2060 client->name);
2061 if (IS_ERR(ptr: chip->thread)) {
2062 v4l2_warn(sd, "failed to create kthread\n");
2063 chip->thread = NULL;
2064 }
2065 }
2066 return 0;
2067}
2068
2069static void tvaudio_remove(struct i2c_client *client)
2070{
2071 struct v4l2_subdev *sd = i2c_get_clientdata(client);
2072 struct CHIPSTATE *chip = to_state(sd);
2073
2074 del_timer_sync(timer: &chip->wt);
2075 if (chip->thread) {
2076 /* shutdown async thread */
2077 kthread_stop(k: chip->thread);
2078 chip->thread = NULL;
2079 }
2080
2081 v4l2_device_unregister_subdev(sd);
2082 v4l2_ctrl_handler_free(hdl: &chip->hdl);
2083}
2084
2085/* This driver supports many devices and the idea is to let the driver
2086 detect which device is present. So rather than listing all supported
2087 devices here, we pretend to support a single, fake device type. */
2088static const struct i2c_device_id tvaudio_id[] = {
2089 { "tvaudio", 0 },
2090 { }
2091};
2092MODULE_DEVICE_TABLE(i2c, tvaudio_id);
2093
2094static struct i2c_driver tvaudio_driver = {
2095 .driver = {
2096 .name = "tvaudio",
2097 },
2098 .probe = tvaudio_probe,
2099 .remove = tvaudio_remove,
2100 .id_table = tvaudio_id,
2101};
2102
2103module_i2c_driver(tvaudio_driver);
2104

source code of linux/drivers/media/i2c/tvaudio.c