1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Copyright (c) 2018 MediaTek Inc.
4 *
5 */
6
7#ifndef __MTK_CMDQ_H__
8#define __MTK_CMDQ_H__
9
10#include <linux/mailbox_client.h>
11#include <linux/mailbox/mtk-cmdq-mailbox.h>
12#include <linux/timer.h>
13
14#define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0)))
15#define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1))
16
17/*
18 * Every cmdq thread has its own SPRs (Specific Purpose Registers),
19 * so there are 4 * N (threads) SPRs in GCE that shares the same indexes below.
20 */
21#define CMDQ_THR_SPR_IDX0 (0)
22#define CMDQ_THR_SPR_IDX1 (1)
23#define CMDQ_THR_SPR_IDX2 (2)
24#define CMDQ_THR_SPR_IDX3 (3)
25
26struct cmdq_pkt;
27
28enum cmdq_logic_op {
29 CMDQ_LOGIC_ASSIGN = 0,
30 CMDQ_LOGIC_ADD = 1,
31 CMDQ_LOGIC_SUBTRACT = 2,
32 CMDQ_LOGIC_MULTIPLY = 3,
33 CMDQ_LOGIC_XOR = 8,
34 CMDQ_LOGIC_NOT = 9,
35 CMDQ_LOGIC_OR = 10,
36 CMDQ_LOGIC_AND = 11,
37 CMDQ_LOGIC_LEFT_SHIFT = 12,
38 CMDQ_LOGIC_RIGHT_SHIFT = 13,
39 CMDQ_LOGIC_MAX,
40};
41
42struct cmdq_operand {
43 /* register type */
44 bool reg;
45 union {
46 /* index */
47 u16 idx;
48 /* value */
49 u16 value;
50 };
51};
52
53struct cmdq_client_reg {
54 u8 subsys;
55 u16 offset;
56 u16 size;
57};
58
59struct cmdq_client {
60 struct mbox_client client;
61 struct mbox_chan *chan;
62};
63
64#if IS_ENABLED(CONFIG_MTK_CMDQ)
65
66/**
67 * cmdq_dev_get_client_reg() - parse cmdq client reg from the device
68 * node of CMDQ client
69 * @dev: device of CMDQ mailbox client
70 * @client_reg: CMDQ client reg pointer
71 * @idx: the index of desired reg
72 *
73 * Return: 0 for success; else the error code is returned
74 *
75 * Help CMDQ client parsing the cmdq client reg
76 * from the device node of CMDQ client.
77 */
78int cmdq_dev_get_client_reg(struct device *dev,
79 struct cmdq_client_reg *client_reg, int idx);
80
81/**
82 * cmdq_mbox_create() - create CMDQ mailbox client and channel
83 * @dev: device of CMDQ mailbox client
84 * @index: index of CMDQ mailbox channel
85 *
86 * Return: CMDQ mailbox client pointer
87 */
88struct cmdq_client *cmdq_mbox_create(struct device *dev, int index);
89
90/**
91 * cmdq_mbox_destroy() - destroy CMDQ mailbox client and channel
92 * @client: the CMDQ mailbox client
93 */
94void cmdq_mbox_destroy(struct cmdq_client *client);
95
96/**
97 * cmdq_pkt_create() - create a CMDQ packet
98 * @client: the CMDQ mailbox client
99 * @pkt: the CMDQ packet
100 * @size: required CMDQ buffer size
101 *
102 * Return: 0 for success; else the error code is returned
103 */
104int cmdq_pkt_create(struct cmdq_client *client, struct cmdq_pkt *pkt, size_t size);
105
106/**
107 * cmdq_pkt_destroy() - destroy the CMDQ packet
108 * @client: the CMDQ mailbox client
109 * @pkt: the CMDQ packet
110 */
111void cmdq_pkt_destroy(struct cmdq_client *client, struct cmdq_pkt *pkt);
112
113/**
114 * cmdq_pkt_write() - append write command to the CMDQ packet
115 * @pkt: the CMDQ packet
116 * @subsys: the CMDQ sub system code
117 * @offset: register offset from CMDQ sub system
118 * @value: the specified target register value
119 *
120 * Return: 0 for success; else the error code is returned
121 */
122int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
123
124/**
125 * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
126 * @pkt: the CMDQ packet
127 * @subsys: the CMDQ sub system code
128 * @offset: register offset from CMDQ sub system
129 * @value: the specified target register value
130 * @mask: the specified target register mask
131 *
132 * Return: 0 for success; else the error code is returned
133 */
134int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
135 u16 offset, u32 value, u32 mask);
136
137/*
138 * cmdq_pkt_read_s() - append read_s command to the CMDQ packet
139 * @pkt: the CMDQ packet
140 * @high_addr_reg_idx: internal register ID which contains high address of pa
141 * @addr_low: low address of pa
142 * @reg_idx: the CMDQ internal register ID to cache read data
143 *
144 * Return: 0 for success; else the error code is returned
145 */
146int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
147 u16 reg_idx);
148
149/**
150 * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
151 * @pkt: the CMDQ packet
152 * @high_addr_reg_idx: internal register ID which contains high address of pa
153 * @addr_low: low address of pa
154 * @src_reg_idx: the CMDQ internal register ID which cache source value
155 *
156 * Return: 0 for success; else the error code is returned
157 *
158 * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
159 * to get high address and call cmdq_pkt_assign() to assign value into internal
160 * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
161 * call to this function.
162 */
163int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
164 u16 addr_low, u16 src_reg_idx);
165
166/**
167 * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet
168 * @pkt: the CMDQ packet
169 * @high_addr_reg_idx: internal register ID which contains high address of pa
170 * @addr_low: low address of pa
171 * @src_reg_idx: the CMDQ internal register ID which cache source value
172 * @mask: the specified target address mask, use U32_MAX if no need
173 *
174 * Return: 0 for success; else the error code is returned
175 *
176 * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
177 * to get high address and call cmdq_pkt_assign() to assign value into internal
178 * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
179 * call to this function.
180 */
181int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
182 u16 addr_low, u16 src_reg_idx, u32 mask);
183
184/**
185 * cmdq_pkt_write_s_value() - append write_s command to the CMDQ packet which
186 * write value to a physical address
187 * @pkt: the CMDQ packet
188 * @high_addr_reg_idx: internal register ID which contains high address of pa
189 * @addr_low: low address of pa
190 * @value: the specified target value
191 *
192 * Return: 0 for success; else the error code is returned
193 */
194int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
195 u16 addr_low, u32 value);
196
197/**
198 * cmdq_pkt_write_s_mask_value() - append write_s command with mask to the CMDQ
199 * packet which write value to a physical
200 * address
201 * @pkt: the CMDQ packet
202 * @high_addr_reg_idx: internal register ID which contains high address of pa
203 * @addr_low: low address of pa
204 * @value: the specified target value
205 * @mask: the specified target mask
206 *
207 * Return: 0 for success; else the error code is returned
208 */
209int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
210 u16 addr_low, u32 value, u32 mask);
211
212/**
213 * cmdq_pkt_mem_move() - append memory move command to the CMDQ packet
214 * @pkt: the CMDQ packet
215 * @src_addr: source address
216 * @dst_addr: destination address
217 *
218 * Appends a CMDQ command to copy the value found in `src_addr` to `dst_addr`.
219 *
220 * Return: 0 for success; else the error code is returned
221 */
222int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr);
223
224/**
225 * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
226 * @pkt: the CMDQ packet
227 * @event: the desired event type to wait
228 * @clear: clear event or not after event arrive
229 *
230 * Return: 0 for success; else the error code is returned
231 */
232int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear);
233
234/**
235 * cmdq_pkt_acquire_event() - append acquire event command to the CMDQ packet
236 * @pkt: the CMDQ packet
237 * @event: the desired event to be acquired
238 *
239 * User can use cmdq_pkt_acquire_event() as `mutex_lock` and cmdq_pkt_clear_event()
240 * as `mutex_unlock` to protect some `critical section` instructions between them.
241 * cmdq_pkt_acquire_event() would wait for event to be cleared.
242 * After event is cleared by cmdq_pkt_clear_event in other GCE threads,
243 * cmdq_pkt_acquire_event() would set event and keep executing next instruction.
244 *
245 * Return: 0 for success; else the error code is returned
246 */
247int cmdq_pkt_acquire_event(struct cmdq_pkt *pkt, u16 event);
248
249/**
250 * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
251 * @pkt: the CMDQ packet
252 * @event: the desired event to be cleared
253 *
254 * Return: 0 for success; else the error code is returned
255 */
256int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
257
258/**
259 * cmdq_pkt_set_event() - append set event command to the CMDQ packet
260 * @pkt: the CMDQ packet
261 * @event: the desired event to be set
262 *
263 * Return: 0 for success; else the error code is returned
264 */
265int cmdq_pkt_set_event(struct cmdq_pkt *pkt, u16 event);
266
267/**
268 * cmdq_pkt_poll() - Append polling command to the CMDQ packet, ask GCE to
269 * execute an instruction that wait for a specified
270 * hardware register to check for the value w/o mask.
271 * All GCE hardware threads will be blocked by this
272 * instruction.
273 * @pkt: the CMDQ packet
274 * @subsys: the CMDQ sub system code
275 * @offset: register offset from CMDQ sub system
276 * @value: the specified target register value
277 *
278 * Return: 0 for success; else the error code is returned
279 */
280int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
281 u16 offset, u32 value);
282
283/**
284 * cmdq_pkt_poll_mask() - Append polling command to the CMDQ packet, ask GCE to
285 * execute an instruction that wait for a specified
286 * hardware register to check for the value w/ mask.
287 * All GCE hardware threads will be blocked by this
288 * instruction.
289 * @pkt: the CMDQ packet
290 * @subsys: the CMDQ sub system code
291 * @offset: register offset from CMDQ sub system
292 * @value: the specified target register value
293 * @mask: the specified target register mask
294 *
295 * Return: 0 for success; else the error code is returned
296 */
297int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
298 u16 offset, u32 value, u32 mask);
299
300/**
301 * cmdq_pkt_logic_command() - Append logic command to the CMDQ packet, ask GCE to
302 * execute an instruction that store the result of logic operation
303 * with left and right operand into result_reg_idx.
304 * @pkt: the CMDQ packet
305 * @result_reg_idx: SPR index that store operation result of left_operand and right_operand
306 * @left_operand: left operand
307 * @s_op: the logic operator enum
308 * @right_operand: right operand
309 *
310 * Return: 0 for success; else the error code is returned
311 */
312int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16 result_reg_idx,
313 struct cmdq_operand *left_operand,
314 enum cmdq_logic_op s_op,
315 struct cmdq_operand *right_operand);
316
317/**
318 * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE
319 * to execute an instruction that set a constant value into
320 * internal register and use as value, mask or address in
321 * read/write instruction.
322 * @pkt: the CMDQ packet
323 * @reg_idx: the CMDQ internal register ID
324 * @value: the specified value
325 *
326 * Return: 0 for success; else the error code is returned
327 */
328int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);
329
330/**
331 * cmdq_pkt_poll_addr() - Append blocking POLL command to CMDQ packet
332 * @pkt: the CMDQ packet
333 * @addr: the hardware register address
334 * @value: the specified target register value
335 * @mask: the specified target register mask
336 *
337 * Appends a polling (POLL) command to the CMDQ packet and asks the GCE
338 * to execute an instruction that checks for the specified `value` (with
339 * or without `mask`) to appear in the specified hardware register `addr`.
340 * All GCE threads will be blocked by this instruction.
341 *
342 * Return: 0 for success or negative error code
343 */
344int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask);
345
346/**
347 * cmdq_pkt_jump_abs() - Append jump command to the CMDQ packet, ask GCE
348 * to execute an instruction that change current thread
349 * PC to a absolute physical address which should
350 * contains more instruction.
351 * @pkt: the CMDQ packet
352 * @addr: absolute physical address of target instruction buffer
353 * @shift_pa: shift bits of physical address in CMDQ instruction. This value
354 * is got by cmdq_get_shift_pa().
355 *
356 * Return: 0 for success; else the error code is returned
357 */
358int cmdq_pkt_jump_abs(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa);
359
360/* This wrapper has to be removed after all users migrated to jump_abs */
361static inline int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa)
362{
363 return cmdq_pkt_jump_abs(pkt, addr, shift_pa);
364}
365
366/**
367 * cmdq_pkt_jump_rel() - Append jump command to the CMDQ packet, ask GCE
368 * to execute an instruction that change current thread
369 * PC to a physical address with relative offset. The
370 * target address should contains more instruction.
371 * @pkt: the CMDQ packet
372 * @offset: relative offset of target instruction buffer from current PC.
373 * @shift_pa: shift bits of physical address in CMDQ instruction. This value
374 * is got by cmdq_get_shift_pa().
375 *
376 * Return: 0 for success; else the error code is returned
377 */
378int cmdq_pkt_jump_rel(struct cmdq_pkt *pkt, s32 offset, u8 shift_pa);
379
380/**
381 * cmdq_pkt_eoc() - Append EOC and ask GCE to generate an IRQ at end of execution
382 * @pkt: The CMDQ packet
383 *
384 * Appends an End Of Code (EOC) command to the CMDQ packet and asks the GCE
385 * to generate an interrupt at the end of the execution of all commands in
386 * the pipeline.
387 * The EOC command is usually appended to the end of the pipeline to notify
388 * that all commands are done.
389 *
390 * Return: 0 for success or negative error number
391 */
392int cmdq_pkt_eoc(struct cmdq_pkt *pkt);
393
394#else /* IS_ENABLED(CONFIG_MTK_CMDQ) */
395
396static inline int cmdq_dev_get_client_reg(struct device *dev,
397 struct cmdq_client_reg *client_reg, int idx)
398{
399 return -ENODEV;
400}
401
402static inline struct cmdq_client *cmdq_mbox_create(struct device *dev, int index)
403{
404 return ERR_PTR(-EINVAL);
405}
406
407static inline void cmdq_mbox_destroy(struct cmdq_client *client) { }
408
409static inline int cmdq_pkt_create(struct cmdq_client *client, struct cmdq_pkt *pkt, size_t size)
410{
411 return -EINVAL;
412}
413
414static inline void cmdq_pkt_destroy(struct cmdq_client *client, struct cmdq_pkt *pkt) { }
415
416static inline int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
417{
418 return -ENOENT;
419}
420
421static inline int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
422 u16 offset, u32 value, u32 mask)
423{
424 return -ENOENT;
425}
426
427static inline int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
428 u16 addr_low, u16 reg_idx)
429{
430 return -ENOENT;
431}
432
433static inline int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
434 u16 addr_low, u16 src_reg_idx)
435{
436 return -ENOENT;
437}
438
439static inline int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
440 u16 addr_low, u16 src_reg_idx, u32 mask)
441{
442 return -ENOENT;
443}
444
445static inline int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
446 u16 addr_low, u32 value)
447{
448 return -ENOENT;
449}
450
451static inline int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
452 u16 addr_low, u32 value, u32 mask)
453{
454 return -ENOENT;
455}
456
457static inline int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear)
458{
459 return -EINVAL;
460}
461
462static inline int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
463{
464 return -EINVAL;
465}
466
467static inline int cmdq_pkt_set_event(struct cmdq_pkt *pkt, u16 event)
468{
469 return -EINVAL;
470}
471
472static inline int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
473 u16 offset, u32 value)
474{
475 return -EINVAL;
476}
477
478static inline int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
479 u16 offset, u32 value, u32 mask)
480{
481 return -EINVAL;
482}
483
484static inline int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
485{
486 return -EINVAL;
487}
488
489static inline int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask)
490{
491 return -EINVAL;
492}
493
494static inline int cmdq_pkt_jump_abs(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa)
495{
496 return -EINVAL;
497}
498
499static inline int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa)
500{
501 return -EINVAL;
502}
503
504static inline int cmdq_pkt_jump_rel(struct cmdq_pkt *pkt, s32 offset, u8 shift_pa)
505{
506 return -EINVAL;
507}
508
509static inline int cmdq_pkt_eoc(struct cmdq_pkt *pkt)
510{
511 return -EINVAL;
512}
513
514#endif /* IS_ENABLED(CONFIG_MTK_CMDQ) */
515
516#endif /* __MTK_CMDQ_H__ */
517

source code of linux/include/linux/soc/mediatek/mtk-cmdq.h