1/*!
2This module provides APIs for dealing with the alphabets of finite state
3machines.
4
5There are two principal types in this module, [`ByteClasses`] and [`Unit`].
6The former defines the alphabet of a finite state machine while the latter
7represents an element of that alphabet.
8
9To a first approximation, the alphabet of all automata in this crate is just
10a `u8`. Namely, every distinct byte value. All 256 of them. In practice, this
11can be quite wasteful when building a transition table for a DFA, since it
12requires storing a state identifier for each element in the alphabet. Instead,
13we collapse the alphabet of an automaton down into equivalence classes, where
14every byte in the same equivalence class never discriminates between a match or
15a non-match from any other byte in the same class. For example, in the regex
16`[a-z]+`, then you could consider it having an alphabet consisting of two
17equivalence classes: `a-z` and everything else. In terms of the transitions on
18an automaton, it doesn't actually require representing every distinct byte.
19Just the equivalence classes.
20
21The downside of equivalence classes is that, of course, searching a haystack
22deals with individual byte values. Those byte values need to be mapped to
23their corresponding equivalence class. This is what `ByteClasses` does. In
24practice, doing this for every state transition has negligible impact on modern
25CPUs. Moreover, it helps make more efficient use of the CPU cache by (possibly
26considerably) shrinking the size of the transition table.
27
28One last hiccup concerns `Unit`. Namely, because of look-around and how the
29DFAs in this crate work, we need to add a sentinel value to our alphabet
30of equivalence classes that represents the "end" of a search. We call that
31sentinel [`Unit::eoi`] or "end of input." Thus, a `Unit` is either an
32equivalence class corresponding to a set of bytes, or it is a special "end of
33input" sentinel.
34
35In general, you should not expect to need either of these types unless you're
36doing lower level shenanigans with DFAs, or even building your own DFAs.
37(Although, you don't have to use these types to build your own DFAs of course.)
38For example, if you're walking a DFA's state graph, it's probably useful to
39make use of [`ByteClasses`] to visit each element in the DFA's alphabet instead
40of just visiting every distinct `u8` value. The latter isn't necessarily wrong,
41but it could be potentially very wasteful.
42*/
43use crate::util::{
44 escape::DebugByte,
45 wire::{self, DeserializeError, SerializeError},
46};
47
48/// Unit represents a single unit of haystack for DFA based regex engines.
49///
50/// It is not expected for consumers of this crate to need to use this type
51/// unless they are implementing their own DFA. And even then, it's not
52/// required: implementors may use other techniques to handle haystack units.
53///
54/// Typically, a single unit of haystack for a DFA would be a single byte.
55/// However, for the DFAs in this crate, matches are delayed by a single byte
56/// in order to handle look-ahead assertions (`\b`, `$` and `\z`). Thus, once
57/// we have consumed the haystack, we must run the DFA through one additional
58/// transition using a unit that indicates the haystack has ended.
59///
60/// There is no way to represent a sentinel with a `u8` since all possible
61/// values *may* be valid haystack units to a DFA, therefore this type
62/// explicitly adds room for a sentinel value.
63///
64/// The sentinel EOI value is always its own equivalence class and is
65/// ultimately represented by adding 1 to the maximum equivalence class value.
66/// So for example, the regex `^[a-z]+$` might be split into the following
67/// equivalence classes:
68///
69/// ```text
70/// 0 => [\x00-`]
71/// 1 => [a-z]
72/// 2 => [{-\xFF]
73/// 3 => [EOI]
74/// ```
75///
76/// Where EOI is the special sentinel value that is always in its own
77/// singleton equivalence class.
78#[derive(Clone, Copy, Eq, PartialEq, PartialOrd, Ord)]
79pub struct Unit(UnitKind);
80
81#[derive(Clone, Copy, Eq, PartialEq, PartialOrd, Ord)]
82enum UnitKind {
83 /// Represents a byte value, or more typically, an equivalence class
84 /// represented as a byte value.
85 U8(u8),
86 /// Represents the "end of input" sentinel. We regretably use a `u16`
87 /// here since the maximum sentinel value is `256`. Thankfully, we don't
88 /// actually store a `Unit` anywhere, so this extra space shouldn't be too
89 /// bad.
90 EOI(u16),
91}
92
93impl Unit {
94 /// Create a new haystack unit from a byte value.
95 ///
96 /// All possible byte values are legal. However, when creating a haystack
97 /// unit for a specific DFA, one should be careful to only construct units
98 /// that are in that DFA's alphabet. Namely, one way to compact a DFA's
99 /// in-memory representation is to collapse its transitions to a set of
100 /// equivalence classes into a set of all possible byte values. If a DFA
101 /// uses equivalence classes instead of byte values, then the byte given
102 /// here should be the equivalence class.
103 pub fn u8(byte: u8) -> Unit {
104 Unit(UnitKind::U8(byte))
105 }
106
107 /// Create a new "end of input" haystack unit.
108 ///
109 /// The value given is the sentinel value used by this unit to represent
110 /// the "end of input." The value should be the total number of equivalence
111 /// classes in the corresponding alphabet. Its maximum value is `256`,
112 /// which occurs when every byte is its own equivalence class.
113 ///
114 /// # Panics
115 ///
116 /// This panics when `num_byte_equiv_classes` is greater than `256`.
117 pub fn eoi(num_byte_equiv_classes: usize) -> Unit {
118 assert!(
119 num_byte_equiv_classes <= 256,
120 "max number of byte-based equivalent classes is 256, but got {}",
121 num_byte_equiv_classes,
122 );
123 Unit(UnitKind::EOI(u16::try_from(num_byte_equiv_classes).unwrap()))
124 }
125
126 /// If this unit is not an "end of input" sentinel, then returns its
127 /// underlying byte value. Otherwise return `None`.
128 pub fn as_u8(self) -> Option<u8> {
129 match self.0 {
130 UnitKind::U8(b) => Some(b),
131 UnitKind::EOI(_) => None,
132 }
133 }
134
135 /// If this unit is an "end of input" sentinel, then return the underlying
136 /// sentinel value that was given to [`Unit::eoi`]. Otherwise return
137 /// `None`.
138 pub fn as_eoi(self) -> Option<u16> {
139 match self.0 {
140 UnitKind::U8(_) => None,
141 UnitKind::EOI(sentinel) => Some(sentinel),
142 }
143 }
144
145 /// Return this unit as a `usize`, regardless of whether it is a byte value
146 /// or an "end of input" sentinel. In the latter case, the underlying
147 /// sentinel value given to [`Unit::eoi`] is returned.
148 pub fn as_usize(self) -> usize {
149 match self.0 {
150 UnitKind::U8(b) => usize::from(b),
151 UnitKind::EOI(eoi) => usize::from(eoi),
152 }
153 }
154
155 /// Returns true if and only of this unit is a byte value equivalent to the
156 /// byte given. This always returns false when this is an "end of input"
157 /// sentinel.
158 pub fn is_byte(self, byte: u8) -> bool {
159 self.as_u8().map_or(false, |b| b == byte)
160 }
161
162 /// Returns true when this unit represents an "end of input" sentinel.
163 pub fn is_eoi(self) -> bool {
164 self.as_eoi().is_some()
165 }
166
167 /// Returns true when this unit corresponds to an ASCII word byte.
168 ///
169 /// This always returns false when this unit represents an "end of input"
170 /// sentinel.
171 pub fn is_word_byte(self) -> bool {
172 self.as_u8().map_or(false, crate::util::utf8::is_word_byte)
173 }
174}
175
176impl core::fmt::Debug for Unit {
177 fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
178 match self.0 {
179 UnitKind::U8(b: u8) => write!(f, "{:?}", DebugByte(b)),
180 UnitKind::EOI(_) => write!(f, "EOI"),
181 }
182 }
183}
184
185/// A representation of byte oriented equivalence classes.
186///
187/// This is used in a DFA to reduce the size of the transition table. This can
188/// have a particularly large impact not only on the total size of a dense DFA,
189/// but also on compile times.
190///
191/// The essential idea here is that the alphabet of a DFA is shrunk from the
192/// usual 256 distinct byte values down to a set of equivalence classes. The
193/// guarantee you get is that any byte belonging to the same equivalence class
194/// can be treated as if it were any other byte in the same class, and the
195/// result of a search wouldn't change.
196///
197/// # Example
198///
199/// This example shows how to get byte classes from an
200/// [`NFA`](crate::nfa::thompson::NFA) and ask for the class of various bytes.
201///
202/// ```
203/// use regex_automata::nfa::thompson::NFA;
204///
205/// let nfa = NFA::new("[a-z]+")?;
206/// let classes = nfa.byte_classes();
207/// // 'a' and 'z' are in the same class for this regex.
208/// assert_eq!(classes.get(b'a'), classes.get(b'z'));
209/// // But 'a' and 'A' are not.
210/// assert_ne!(classes.get(b'a'), classes.get(b'A'));
211///
212/// # Ok::<(), Box<dyn std::error::Error>>(())
213/// ```
214#[derive(Clone, Copy)]
215pub struct ByteClasses([u8; 256]);
216
217impl ByteClasses {
218 /// Creates a new set of equivalence classes where all bytes are mapped to
219 /// the same class.
220 #[inline]
221 pub fn empty() -> ByteClasses {
222 ByteClasses([0; 256])
223 }
224
225 /// Creates a new set of equivalence classes where each byte belongs to
226 /// its own equivalence class.
227 #[inline]
228 pub fn singletons() -> ByteClasses {
229 let mut classes = ByteClasses::empty();
230 for b in 0..=255 {
231 classes.set(b, b);
232 }
233 classes
234 }
235
236 /// Deserializes a byte class map from the given slice. If the slice is of
237 /// insufficient length or otherwise contains an impossible mapping, then
238 /// an error is returned. Upon success, the number of bytes read along with
239 /// the map are returned. The number of bytes read is always a multiple of
240 /// 8.
241 pub(crate) fn from_bytes(
242 slice: &[u8],
243 ) -> Result<(ByteClasses, usize), DeserializeError> {
244 wire::check_slice_len(slice, 256, "byte class map")?;
245 let mut classes = ByteClasses::empty();
246 for (b, &class) in slice[..256].iter().enumerate() {
247 classes.set(u8::try_from(b).unwrap(), class);
248 }
249 // We specifically don't use 'classes.iter()' here because that
250 // iterator depends on 'classes.alphabet_len()' being correct. But that
251 // is precisely the thing we're trying to verify below!
252 for &b in classes.0.iter() {
253 if usize::from(b) >= classes.alphabet_len() {
254 return Err(DeserializeError::generic(
255 "found equivalence class greater than alphabet len",
256 ));
257 }
258 }
259 Ok((classes, 256))
260 }
261
262 /// Writes this byte class map to the given byte buffer. if the given
263 /// buffer is too small, then an error is returned. Upon success, the total
264 /// number of bytes written is returned. The number of bytes written is
265 /// guaranteed to be a multiple of 8.
266 pub(crate) fn write_to(
267 &self,
268 mut dst: &mut [u8],
269 ) -> Result<usize, SerializeError> {
270 let nwrite = self.write_to_len();
271 if dst.len() < nwrite {
272 return Err(SerializeError::buffer_too_small("byte class map"));
273 }
274 for b in 0..=255 {
275 dst[0] = self.get(b);
276 dst = &mut dst[1..];
277 }
278 Ok(nwrite)
279 }
280
281 /// Returns the total number of bytes written by `write_to`.
282 pub(crate) fn write_to_len(&self) -> usize {
283 256
284 }
285
286 /// Set the equivalence class for the given byte.
287 #[inline]
288 pub fn set(&mut self, byte: u8, class: u8) {
289 self.0[usize::from(byte)] = class;
290 }
291
292 /// Get the equivalence class for the given byte.
293 #[inline]
294 pub fn get(&self, byte: u8) -> u8 {
295 self.0[usize::from(byte)]
296 }
297
298 /// Get the equivalence class for the given haystack unit and return the
299 /// class as a `usize`.
300 #[inline]
301 pub fn get_by_unit(&self, unit: Unit) -> usize {
302 match unit.0 {
303 UnitKind::U8(b) => usize::from(self.get(b)),
304 UnitKind::EOI(b) => usize::from(b),
305 }
306 }
307
308 /// Create a unit that represents the "end of input" sentinel based on the
309 /// number of equivalence classes.
310 #[inline]
311 pub fn eoi(&self) -> Unit {
312 // The alphabet length already includes the EOI sentinel, hence why
313 // we subtract 1.
314 Unit::eoi(self.alphabet_len().checked_sub(1).unwrap())
315 }
316
317 /// Return the total number of elements in the alphabet represented by
318 /// these equivalence classes. Equivalently, this returns the total number
319 /// of equivalence classes.
320 #[inline]
321 pub fn alphabet_len(&self) -> usize {
322 // Add one since the number of equivalence classes is one bigger than
323 // the last one. But add another to account for the final EOI class
324 // that isn't explicitly represented.
325 usize::from(self.0[255]) + 1 + 1
326 }
327
328 /// Returns the stride, as a base-2 exponent, required for these
329 /// equivalence classes.
330 ///
331 /// The stride is always the smallest power of 2 that is greater than or
332 /// equal to the alphabet length, and the `stride2` returned here is the
333 /// exponent applied to `2` to get the smallest power. This is done so that
334 /// converting between premultiplied state IDs and indices can be done with
335 /// shifts alone, which is much faster than integer division.
336 #[inline]
337 pub fn stride2(&self) -> usize {
338 let zeros = self.alphabet_len().next_power_of_two().trailing_zeros();
339 usize::try_from(zeros).unwrap()
340 }
341
342 /// Returns true if and only if every byte in this class maps to its own
343 /// equivalence class. Equivalently, there are 257 equivalence classes
344 /// and each class contains either exactly one byte or corresponds to the
345 /// singleton class containing the "end of input" sentinel.
346 #[inline]
347 pub fn is_singleton(&self) -> bool {
348 self.alphabet_len() == 257
349 }
350
351 /// Returns an iterator over all equivalence classes in this set.
352 #[inline]
353 pub fn iter(&self) -> ByteClassIter<'_> {
354 ByteClassIter { classes: self, i: 0 }
355 }
356
357 /// Returns an iterator over a sequence of representative bytes from each
358 /// equivalence class within the range of bytes given.
359 ///
360 /// When the given range is unbounded on both sides, the iterator yields
361 /// exactly N items, where N is equivalent to the number of equivalence
362 /// classes. Each item is an arbitrary byte drawn from each equivalence
363 /// class.
364 ///
365 /// This is useful when one is determinizing an NFA and the NFA's alphabet
366 /// hasn't been converted to equivalence classes. Picking an arbitrary byte
367 /// from each equivalence class then permits a full exploration of the NFA
368 /// instead of using every possible byte value and thus potentially saves
369 /// quite a lot of redundant work.
370 ///
371 /// # Example
372 ///
373 /// This shows an example of what a complete sequence of representatives
374 /// might look like from a real example.
375 ///
376 /// ```
377 /// use regex_automata::{nfa::thompson::NFA, util::alphabet::Unit};
378 ///
379 /// let nfa = NFA::new("[a-z]+")?;
380 /// let classes = nfa.byte_classes();
381 /// let reps: Vec<Unit> = classes.representatives(..).collect();
382 /// // Note that the specific byte values yielded are not guaranteed!
383 /// let expected = vec![
384 /// Unit::u8(b'\x00'),
385 /// Unit::u8(b'a'),
386 /// Unit::u8(b'{'),
387 /// Unit::eoi(3),
388 /// ];
389 /// assert_eq!(expected, reps);
390 ///
391 /// # Ok::<(), Box<dyn std::error::Error>>(())
392 /// ```
393 ///
394 /// Note though, that you can ask for an arbitrary range of bytes, and only
395 /// representatives for that range will be returned:
396 ///
397 /// ```
398 /// use regex_automata::{nfa::thompson::NFA, util::alphabet::Unit};
399 ///
400 /// let nfa = NFA::new("[a-z]+")?;
401 /// let classes = nfa.byte_classes();
402 /// let reps: Vec<Unit> = classes.representatives(b'A'..=b'z').collect();
403 /// // Note that the specific byte values yielded are not guaranteed!
404 /// let expected = vec![
405 /// Unit::u8(b'A'),
406 /// Unit::u8(b'a'),
407 /// ];
408 /// assert_eq!(expected, reps);
409 ///
410 /// # Ok::<(), Box<dyn std::error::Error>>(())
411 /// ```
412 pub fn representatives<R: core::ops::RangeBounds<u8>>(
413 &self,
414 range: R,
415 ) -> ByteClassRepresentatives<'_> {
416 use core::ops::Bound;
417
418 let cur_byte = match range.start_bound() {
419 Bound::Included(&i) => usize::from(i),
420 Bound::Excluded(&i) => usize::from(i).checked_add(1).unwrap(),
421 Bound::Unbounded => 0,
422 };
423 let end_byte = match range.end_bound() {
424 Bound::Included(&i) => {
425 Some(usize::from(i).checked_add(1).unwrap())
426 }
427 Bound::Excluded(&i) => Some(usize::from(i)),
428 Bound::Unbounded => None,
429 };
430 assert_ne!(
431 cur_byte,
432 usize::MAX,
433 "start range must be less than usize::MAX",
434 );
435 ByteClassRepresentatives {
436 classes: self,
437 cur_byte,
438 end_byte,
439 last_class: None,
440 }
441 }
442
443 /// Returns an iterator of the bytes in the given equivalence class.
444 ///
445 /// This is useful when one needs to know the actual bytes that belong to
446 /// an equivalence class. For example, conceptually speaking, accelerating
447 /// a DFA state occurs when a state only has a few outgoing transitions.
448 /// But in reality, what is required is that there are only a small
449 /// number of distinct bytes that can lead to an outgoing transition. The
450 /// difference is that any one transition can correspond to an equivalence
451 /// class which may contains many bytes. Therefore, DFA state acceleration
452 /// considers the actual elements in each equivalence class of each
453 /// outgoing transition.
454 ///
455 /// # Example
456 ///
457 /// This shows an example of how to get all of the elements in an
458 /// equivalence class.
459 ///
460 /// ```
461 /// use regex_automata::{nfa::thompson::NFA, util::alphabet::Unit};
462 ///
463 /// let nfa = NFA::new("[a-z]+")?;
464 /// let classes = nfa.byte_classes();
465 /// let elements: Vec<Unit> = classes.elements(Unit::u8(1)).collect();
466 /// let expected: Vec<Unit> = (b'a'..=b'z').map(Unit::u8).collect();
467 /// assert_eq!(expected, elements);
468 ///
469 /// # Ok::<(), Box<dyn std::error::Error>>(())
470 /// ```
471 #[inline]
472 pub fn elements(&self, class: Unit) -> ByteClassElements {
473 ByteClassElements { classes: self, class, byte: 0 }
474 }
475
476 /// Returns an iterator of byte ranges in the given equivalence class.
477 ///
478 /// That is, a sequence of contiguous ranges are returned. Typically, every
479 /// class maps to a single contiguous range.
480 fn element_ranges(&self, class: Unit) -> ByteClassElementRanges {
481 ByteClassElementRanges { elements: self.elements(class), range: None }
482 }
483}
484
485impl Default for ByteClasses {
486 fn default() -> ByteClasses {
487 ByteClasses::singletons()
488 }
489}
490
491impl core::fmt::Debug for ByteClasses {
492 fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
493 if self.is_singleton() {
494 write!(f, "ByteClasses({{singletons}})")
495 } else {
496 write!(f, "ByteClasses(")?;
497 for (i: usize, class: Unit) in self.iter().enumerate() {
498 if i > 0 {
499 write!(f, ", ")?;
500 }
501 write!(f, "{:?} => [", class.as_usize())?;
502 for (start: Unit, end: Unit) in self.element_ranges(class) {
503 if start == end {
504 write!(f, "{:?}", start)?;
505 } else {
506 write!(f, "{:?}-{:?}", start, end)?;
507 }
508 }
509 write!(f, "]")?;
510 }
511 write!(f, ")")
512 }
513 }
514}
515
516/// An iterator over each equivalence class.
517///
518/// The last element in this iterator always corresponds to [`Unit::eoi`].
519///
520/// This is created by the [`ByteClasses::iter`] method.
521///
522/// The lifetime `'a` refers to the lifetime of the byte classes that this
523/// iterator was created from.
524#[derive(Debug)]
525pub struct ByteClassIter<'a> {
526 classes: &'a ByteClasses,
527 i: usize,
528}
529
530impl<'a> Iterator for ByteClassIter<'a> {
531 type Item = Unit;
532
533 fn next(&mut self) -> Option<Unit> {
534 if self.i + 1 == self.classes.alphabet_len() {
535 self.i += 1;
536 Some(self.classes.eoi())
537 } else if self.i < self.classes.alphabet_len() {
538 let class: u8 = u8::try_from(self.i).unwrap();
539 self.i += 1;
540 Some(Unit::u8(byte:class))
541 } else {
542 None
543 }
544 }
545}
546
547/// An iterator over representative bytes from each equivalence class.
548///
549/// This is created by the [`ByteClasses::representatives`] method.
550///
551/// The lifetime `'a` refers to the lifetime of the byte classes that this
552/// iterator was created from.
553#[derive(Debug)]
554pub struct ByteClassRepresentatives<'a> {
555 classes: &'a ByteClasses,
556 cur_byte: usize,
557 end_byte: Option<usize>,
558 last_class: Option<u8>,
559}
560
561impl<'a> Iterator for ByteClassRepresentatives<'a> {
562 type Item = Unit;
563
564 fn next(&mut self) -> Option<Unit> {
565 while self.cur_byte < self.end_byte.unwrap_or(256) {
566 let byte = u8::try_from(self.cur_byte).unwrap();
567 let class = self.classes.get(byte);
568 self.cur_byte += 1;
569
570 if self.last_class != Some(class) {
571 self.last_class = Some(class);
572 return Some(Unit::u8(byte));
573 }
574 }
575 if self.cur_byte != usize::MAX && self.end_byte.is_none() {
576 // Using usize::MAX as a sentinel is OK because we ban usize::MAX
577 // from appearing as a start bound in iterator construction. But
578 // why do it this way? Well, we want to return the EOI class
579 // whenever the end of the given range is unbounded because EOI
580 // isn't really a "byte" per se, so the only way it should be
581 // excluded is if there is a bounded end to the range. Therefore,
582 // when the end is unbounded, we just need to know whether we've
583 // reported EOI or not. When we do, we set cur_byte to a value it
584 // can never otherwise be.
585 self.cur_byte = usize::MAX;
586 return Some(self.classes.eoi());
587 }
588 None
589 }
590}
591
592/// An iterator over all elements in an equivalence class.
593///
594/// This is created by the [`ByteClasses::elements`] method.
595///
596/// The lifetime `'a` refers to the lifetime of the byte classes that this
597/// iterator was created from.
598#[derive(Debug)]
599pub struct ByteClassElements<'a> {
600 classes: &'a ByteClasses,
601 class: Unit,
602 byte: usize,
603}
604
605impl<'a> Iterator for ByteClassElements<'a> {
606 type Item = Unit;
607
608 fn next(&mut self) -> Option<Unit> {
609 while self.byte < 256 {
610 let byte: u8 = u8::try_from(self.byte).unwrap();
611 self.byte += 1;
612 if self.class.is_byte(self.classes.get(byte)) {
613 return Some(Unit::u8(byte));
614 }
615 }
616 if self.byte < 257 {
617 self.byte += 1;
618 if self.class.is_eoi() {
619 return Some(Unit::eoi(num_byte_equiv_classes:256));
620 }
621 }
622 None
623 }
624}
625
626/// An iterator over all elements in an equivalence class expressed as a
627/// sequence of contiguous ranges.
628#[derive(Debug)]
629struct ByteClassElementRanges<'a> {
630 elements: ByteClassElements<'a>,
631 range: Option<(Unit, Unit)>,
632}
633
634impl<'a> Iterator for ByteClassElementRanges<'a> {
635 type Item = (Unit, Unit);
636
637 fn next(&mut self) -> Option<(Unit, Unit)> {
638 loop {
639 let element = match self.elements.next() {
640 None => return self.range.take(),
641 Some(element) => element,
642 };
643 match self.range.take() {
644 None => {
645 self.range = Some((element, element));
646 }
647 Some((start, end)) => {
648 if end.as_usize() + 1 != element.as_usize()
649 || element.is_eoi()
650 {
651 self.range = Some((element, element));
652 return Some((start, end));
653 }
654 self.range = Some((start, element));
655 }
656 }
657 }
658 }
659}
660
661/// A partitioning of bytes into equivalence classes.
662///
663/// A byte class set keeps track of an *approximation* of equivalence classes
664/// of bytes during NFA construction. That is, every byte in an equivalence
665/// class cannot discriminate between a match and a non-match.
666///
667/// For example, in the regex `[ab]+`, the bytes `a` and `b` would be in the
668/// same equivalence class because it never matters whether an `a` or a `b` is
669/// seen, and no combination of `a`s and `b`s in the text can discriminate a
670/// match.
671///
672/// Note though that this does not compute the minimal set of equivalence
673/// classes. For example, in the regex `[ac]+`, both `a` and `c` are in the
674/// same equivalence class for the same reason that `a` and `b` are in the
675/// same equivalence class in the aforementioned regex. However, in this
676/// implementation, `a` and `c` are put into distinct equivalence classes. The
677/// reason for this is implementation complexity. In the future, we should
678/// endeavor to compute the minimal equivalence classes since they can have a
679/// rather large impact on the size of the DFA. (Doing this will likely require
680/// rethinking how equivalence classes are computed, including changing the
681/// representation here, which is only able to group contiguous bytes into the
682/// same equivalence class.)
683#[cfg(feature = "alloc")]
684#[derive(Clone, Debug)]
685pub(crate) struct ByteClassSet(ByteSet);
686
687#[cfg(feature = "alloc")]
688impl Default for ByteClassSet {
689 fn default() -> ByteClassSet {
690 ByteClassSet::empty()
691 }
692}
693
694#[cfg(feature = "alloc")]
695impl ByteClassSet {
696 /// Create a new set of byte classes where all bytes are part of the same
697 /// equivalence class.
698 pub(crate) fn empty() -> Self {
699 ByteClassSet(ByteSet::empty())
700 }
701
702 /// Indicate the the range of byte given (inclusive) can discriminate a
703 /// match between it and all other bytes outside of the range.
704 pub(crate) fn set_range(&mut self, start: u8, end: u8) {
705 debug_assert!(start <= end);
706 if start > 0 {
707 self.0.add(start - 1);
708 }
709 self.0.add(end);
710 }
711
712 /// Add the contiguous ranges in the set given to this byte class set.
713 pub(crate) fn add_set(&mut self, set: &ByteSet) {
714 for (start, end) in set.iter_ranges() {
715 self.set_range(start, end);
716 }
717 }
718
719 /// Convert this boolean set to a map that maps all byte values to their
720 /// corresponding equivalence class. The last mapping indicates the largest
721 /// equivalence class identifier (which is never bigger than 255).
722 pub(crate) fn byte_classes(&self) -> ByteClasses {
723 let mut classes = ByteClasses::empty();
724 let mut class = 0u8;
725 let mut b = 0u8;
726 loop {
727 classes.set(b, class);
728 if b == 255 {
729 break;
730 }
731 if self.0.contains(b) {
732 class = class.checked_add(1).unwrap();
733 }
734 b = b.checked_add(1).unwrap();
735 }
736 classes
737 }
738}
739
740/// A simple set of bytes that is reasonably cheap to copy and allocation free.
741#[derive(Clone, Copy, Debug, Default, Eq, PartialEq)]
742pub(crate) struct ByteSet {
743 bits: BitSet,
744}
745
746/// The representation of a byte set. Split out so that we can define a
747/// convenient Debug impl for it while keeping "ByteSet" in the output.
748#[derive(Clone, Copy, Default, Eq, PartialEq)]
749struct BitSet([u128; 2]);
750
751impl ByteSet {
752 /// Create an empty set of bytes.
753 pub(crate) fn empty() -> ByteSet {
754 ByteSet { bits: BitSet([0; 2]) }
755 }
756
757 /// Add a byte to this set.
758 ///
759 /// If the given byte already belongs to this set, then this is a no-op.
760 pub(crate) fn add(&mut self, byte: u8) {
761 let bucket = byte / 128;
762 let bit = byte % 128;
763 self.bits.0[usize::from(bucket)] |= 1 << bit;
764 }
765
766 /// Remove a byte from this set.
767 ///
768 /// If the given byte is not in this set, then this is a no-op.
769 pub(crate) fn remove(&mut self, byte: u8) {
770 let bucket = byte / 128;
771 let bit = byte % 128;
772 self.bits.0[usize::from(bucket)] &= !(1 << bit);
773 }
774
775 /// Return true if and only if the given byte is in this set.
776 pub(crate) fn contains(&self, byte: u8) -> bool {
777 let bucket = byte / 128;
778 let bit = byte % 128;
779 self.bits.0[usize::from(bucket)] & (1 << bit) > 0
780 }
781
782 /// Return true if and only if the given inclusive range of bytes is in
783 /// this set.
784 pub(crate) fn contains_range(&self, start: u8, end: u8) -> bool {
785 (start..=end).all(|b| self.contains(b))
786 }
787
788 /// Returns an iterator over all bytes in this set.
789 pub(crate) fn iter(&self) -> ByteSetIter {
790 ByteSetIter { set: self, b: 0 }
791 }
792
793 /// Returns an iterator over all contiguous ranges of bytes in this set.
794 pub(crate) fn iter_ranges(&self) -> ByteSetRangeIter {
795 ByteSetRangeIter { set: self, b: 0 }
796 }
797
798 /// Return true if and only if this set is empty.
799 #[cfg_attr(feature = "perf-inline", inline(always))]
800 pub(crate) fn is_empty(&self) -> bool {
801 self.bits.0 == [0, 0]
802 }
803
804 /// Deserializes a byte set from the given slice. If the slice is of
805 /// incorrect length or is otherwise malformed, then an error is returned.
806 /// Upon success, the number of bytes read along with the set are returned.
807 /// The number of bytes read is always a multiple of 8.
808 pub(crate) fn from_bytes(
809 slice: &[u8],
810 ) -> Result<(ByteSet, usize), DeserializeError> {
811 use core::mem::size_of;
812
813 wire::check_slice_len(slice, 2 * size_of::<u128>(), "byte set")?;
814 let mut nread = 0;
815 let (low, nr) = wire::try_read_u128(slice, "byte set low bucket")?;
816 nread += nr;
817 let (high, nr) = wire::try_read_u128(slice, "byte set high bucket")?;
818 nread += nr;
819 Ok((ByteSet { bits: BitSet([low, high]) }, nread))
820 }
821
822 /// Writes this byte set to the given byte buffer. If the given buffer is
823 /// too small, then an error is returned. Upon success, the total number of
824 /// bytes written is returned. The number of bytes written is guaranteed to
825 /// be a multiple of 8.
826 pub(crate) fn write_to<E: crate::util::wire::Endian>(
827 &self,
828 dst: &mut [u8],
829 ) -> Result<usize, SerializeError> {
830 use core::mem::size_of;
831
832 let nwrite = self.write_to_len();
833 if dst.len() < nwrite {
834 return Err(SerializeError::buffer_too_small("byte set"));
835 }
836 let mut nw = 0;
837 E::write_u128(self.bits.0[0], &mut dst[nw..]);
838 nw += size_of::<u128>();
839 E::write_u128(self.bits.0[1], &mut dst[nw..]);
840 nw += size_of::<u128>();
841 assert_eq!(nwrite, nw, "expected to write certain number of bytes",);
842 assert_eq!(
843 nw % 8,
844 0,
845 "expected to write multiple of 8 bytes for byte set",
846 );
847 Ok(nw)
848 }
849
850 /// Returns the total number of bytes written by `write_to`.
851 pub(crate) fn write_to_len(&self) -> usize {
852 2 * core::mem::size_of::<u128>()
853 }
854}
855
856impl core::fmt::Debug for BitSet {
857 fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
858 let mut fmtd: DebugSet<'_, '_> = f.debug_set();
859 for b: u8 in 0u8..=255 {
860 if (ByteSet { bits: *self }).contains(byte:b) {
861 fmtd.entry(&b);
862 }
863 }
864 fmtd.finish()
865 }
866}
867
868#[derive(Debug)]
869pub(crate) struct ByteSetIter<'a> {
870 set: &'a ByteSet,
871 b: usize,
872}
873
874impl<'a> Iterator for ByteSetIter<'a> {
875 type Item = u8;
876
877 fn next(&mut self) -> Option<u8> {
878 while self.b <= 255 {
879 let b: u8 = u8::try_from(self.b).unwrap();
880 self.b += 1;
881 if self.set.contains(byte:b) {
882 return Some(b);
883 }
884 }
885 None
886 }
887}
888
889#[derive(Debug)]
890pub(crate) struct ByteSetRangeIter<'a> {
891 set: &'a ByteSet,
892 b: usize,
893}
894
895impl<'a> Iterator for ByteSetRangeIter<'a> {
896 type Item = (u8, u8);
897
898 fn next(&mut self) -> Option<(u8, u8)> {
899 let asu8: impl Fn(usize) -> u8 = |n: usize| u8::try_from(n).unwrap();
900 while self.b <= 255 {
901 let start: u8 = asu8(self.b);
902 self.b += 1;
903 if !self.set.contains(byte:start) {
904 continue;
905 }
906
907 let mut end: u8 = start;
908 while self.b <= 255 && self.set.contains(byte:asu8(self.b)) {
909 end = asu8(self.b);
910 self.b += 1;
911 }
912 return Some((start, end));
913 }
914 None
915 }
916}
917
918#[cfg(all(test, feature = "alloc"))]
919mod tests {
920 use alloc::{vec, vec::Vec};
921
922 use super::*;
923
924 #[test]
925 fn byte_classes() {
926 let mut set = ByteClassSet::empty();
927 set.set_range(b'a', b'z');
928
929 let classes = set.byte_classes();
930 assert_eq!(classes.get(0), 0);
931 assert_eq!(classes.get(1), 0);
932 assert_eq!(classes.get(2), 0);
933 assert_eq!(classes.get(b'a' - 1), 0);
934 assert_eq!(classes.get(b'a'), 1);
935 assert_eq!(classes.get(b'm'), 1);
936 assert_eq!(classes.get(b'z'), 1);
937 assert_eq!(classes.get(b'z' + 1), 2);
938 assert_eq!(classes.get(254), 2);
939 assert_eq!(classes.get(255), 2);
940
941 let mut set = ByteClassSet::empty();
942 set.set_range(0, 2);
943 set.set_range(4, 6);
944 let classes = set.byte_classes();
945 assert_eq!(classes.get(0), 0);
946 assert_eq!(classes.get(1), 0);
947 assert_eq!(classes.get(2), 0);
948 assert_eq!(classes.get(3), 1);
949 assert_eq!(classes.get(4), 2);
950 assert_eq!(classes.get(5), 2);
951 assert_eq!(classes.get(6), 2);
952 assert_eq!(classes.get(7), 3);
953 assert_eq!(classes.get(255), 3);
954 }
955
956 #[test]
957 fn full_byte_classes() {
958 let mut set = ByteClassSet::empty();
959 for b in 0u8..=255 {
960 set.set_range(b, b);
961 }
962 assert_eq!(set.byte_classes().alphabet_len(), 257);
963 }
964
965 #[test]
966 fn elements_typical() {
967 let mut set = ByteClassSet::empty();
968 set.set_range(b'b', b'd');
969 set.set_range(b'g', b'm');
970 set.set_range(b'z', b'z');
971 let classes = set.byte_classes();
972 // class 0: \x00-a
973 // class 1: b-d
974 // class 2: e-f
975 // class 3: g-m
976 // class 4: n-y
977 // class 5: z-z
978 // class 6: \x7B-\xFF
979 // class 7: EOI
980 assert_eq!(classes.alphabet_len(), 8);
981
982 let elements = classes.elements(Unit::u8(0)).collect::<Vec<_>>();
983 assert_eq!(elements.len(), 98);
984 assert_eq!(elements[0], Unit::u8(b'\x00'));
985 assert_eq!(elements[97], Unit::u8(b'a'));
986
987 let elements = classes.elements(Unit::u8(1)).collect::<Vec<_>>();
988 assert_eq!(
989 elements,
990 vec![Unit::u8(b'b'), Unit::u8(b'c'), Unit::u8(b'd')],
991 );
992
993 let elements = classes.elements(Unit::u8(2)).collect::<Vec<_>>();
994 assert_eq!(elements, vec![Unit::u8(b'e'), Unit::u8(b'f')],);
995
996 let elements = classes.elements(Unit::u8(3)).collect::<Vec<_>>();
997 assert_eq!(
998 elements,
999 vec![
1000 Unit::u8(b'g'),
1001 Unit::u8(b'h'),
1002 Unit::u8(b'i'),
1003 Unit::u8(b'j'),
1004 Unit::u8(b'k'),
1005 Unit::u8(b'l'),
1006 Unit::u8(b'm'),
1007 ],
1008 );
1009
1010 let elements = classes.elements(Unit::u8(4)).collect::<Vec<_>>();
1011 assert_eq!(elements.len(), 12);
1012 assert_eq!(elements[0], Unit::u8(b'n'));
1013 assert_eq!(elements[11], Unit::u8(b'y'));
1014
1015 let elements = classes.elements(Unit::u8(5)).collect::<Vec<_>>();
1016 assert_eq!(elements, vec![Unit::u8(b'z')]);
1017
1018 let elements = classes.elements(Unit::u8(6)).collect::<Vec<_>>();
1019 assert_eq!(elements.len(), 133);
1020 assert_eq!(elements[0], Unit::u8(b'\x7B'));
1021 assert_eq!(elements[132], Unit::u8(b'\xFF'));
1022
1023 let elements = classes.elements(Unit::eoi(7)).collect::<Vec<_>>();
1024 assert_eq!(elements, vec![Unit::eoi(256)]);
1025 }
1026
1027 #[test]
1028 fn elements_singletons() {
1029 let classes = ByteClasses::singletons();
1030 assert_eq!(classes.alphabet_len(), 257);
1031
1032 let elements = classes.elements(Unit::u8(b'a')).collect::<Vec<_>>();
1033 assert_eq!(elements, vec![Unit::u8(b'a')]);
1034
1035 let elements = classes.elements(Unit::eoi(5)).collect::<Vec<_>>();
1036 assert_eq!(elements, vec![Unit::eoi(256)]);
1037 }
1038
1039 #[test]
1040 fn elements_empty() {
1041 let classes = ByteClasses::empty();
1042 assert_eq!(classes.alphabet_len(), 2);
1043
1044 let elements = classes.elements(Unit::u8(0)).collect::<Vec<_>>();
1045 assert_eq!(elements.len(), 256);
1046 assert_eq!(elements[0], Unit::u8(b'\x00'));
1047 assert_eq!(elements[255], Unit::u8(b'\xFF'));
1048
1049 let elements = classes.elements(Unit::eoi(1)).collect::<Vec<_>>();
1050 assert_eq!(elements, vec![Unit::eoi(256)]);
1051 }
1052
1053 #[test]
1054 fn representatives() {
1055 let mut set = ByteClassSet::empty();
1056 set.set_range(b'b', b'd');
1057 set.set_range(b'g', b'm');
1058 set.set_range(b'z', b'z');
1059 let classes = set.byte_classes();
1060
1061 let got: Vec<Unit> = classes.representatives(..).collect();
1062 let expected = vec![
1063 Unit::u8(b'\x00'),
1064 Unit::u8(b'b'),
1065 Unit::u8(b'e'),
1066 Unit::u8(b'g'),
1067 Unit::u8(b'n'),
1068 Unit::u8(b'z'),
1069 Unit::u8(b'\x7B'),
1070 Unit::eoi(7),
1071 ];
1072 assert_eq!(expected, got);
1073
1074 let got: Vec<Unit> = classes.representatives(..0).collect();
1075 assert!(got.is_empty());
1076 let got: Vec<Unit> = classes.representatives(1..1).collect();
1077 assert!(got.is_empty());
1078 let got: Vec<Unit> = classes.representatives(255..255).collect();
1079 assert!(got.is_empty());
1080
1081 // A weird case that is the only guaranteed to way to get an iterator
1082 // of just the EOI class by excluding all possible byte values.
1083 let got: Vec<Unit> = classes
1084 .representatives((
1085 core::ops::Bound::Excluded(255),
1086 core::ops::Bound::Unbounded,
1087 ))
1088 .collect();
1089 let expected = vec![Unit::eoi(7)];
1090 assert_eq!(expected, got);
1091
1092 let got: Vec<Unit> = classes.representatives(..=255).collect();
1093 let expected = vec![
1094 Unit::u8(b'\x00'),
1095 Unit::u8(b'b'),
1096 Unit::u8(b'e'),
1097 Unit::u8(b'g'),
1098 Unit::u8(b'n'),
1099 Unit::u8(b'z'),
1100 Unit::u8(b'\x7B'),
1101 ];
1102 assert_eq!(expected, got);
1103
1104 let got: Vec<Unit> = classes.representatives(b'b'..=b'd').collect();
1105 let expected = vec![Unit::u8(b'b')];
1106 assert_eq!(expected, got);
1107
1108 let got: Vec<Unit> = classes.representatives(b'a'..=b'd').collect();
1109 let expected = vec![Unit::u8(b'a'), Unit::u8(b'b')];
1110 assert_eq!(expected, got);
1111
1112 let got: Vec<Unit> = classes.representatives(b'b'..=b'e').collect();
1113 let expected = vec![Unit::u8(b'b'), Unit::u8(b'e')];
1114 assert_eq!(expected, got);
1115
1116 let got: Vec<Unit> = classes.representatives(b'A'..=b'Z').collect();
1117 let expected = vec![Unit::u8(b'A')];
1118 assert_eq!(expected, got);
1119
1120 let got: Vec<Unit> = classes.representatives(b'A'..=b'z').collect();
1121 let expected = vec![
1122 Unit::u8(b'A'),
1123 Unit::u8(b'b'),
1124 Unit::u8(b'e'),
1125 Unit::u8(b'g'),
1126 Unit::u8(b'n'),
1127 Unit::u8(b'z'),
1128 ];
1129 assert_eq!(expected, got);
1130
1131 let got: Vec<Unit> = classes.representatives(b'z'..).collect();
1132 let expected = vec![Unit::u8(b'z'), Unit::u8(b'\x7B'), Unit::eoi(7)];
1133 assert_eq!(expected, got);
1134
1135 let got: Vec<Unit> = classes.representatives(b'z'..=0xFF).collect();
1136 let expected = vec![Unit::u8(b'z'), Unit::u8(b'\x7B')];
1137 assert_eq!(expected, got);
1138 }
1139}
1140