1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * arch/arm/mach-orion5x/rd88f5182-setup.c
4 *
5 * Marvell Orion-NAS Reference Design Setup
6 *
7 * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
8 */
9#include <linux/gpio.h>
10#include <linux/kernel.h>
11#include <linux/init.h>
12#include <linux/of.h>
13#include <linux/platform_device.h>
14#include <linux/pci.h>
15#include <linux/irq.h>
16#include <asm/mach-types.h>
17#include <asm/mach/arch.h>
18#include <asm/mach/pci.h>
19#include "common.h"
20#include "orion5x.h"
21
22/*****************************************************************************
23 * RD-88F5182 Info
24 ****************************************************************************/
25
26/*
27 * PCI
28 */
29
30#define RD88F5182_PCI_SLOT0_OFFS 7
31#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
32#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
33
34/*****************************************************************************
35 * PCI
36 ****************************************************************************/
37
38static void __init rd88f5182_pci_preinit(void)
39{
40 int pin;
41
42 /*
43 * Configure PCI GPIO IRQ pins
44 */
45 pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
46 if (gpio_request(gpio: pin, label: "PCI IntA") == 0) {
47 if (gpio_direction_input(gpio: pin) == 0) {
48 irq_set_irq_type(irq: gpio_to_irq(gpio: pin), type: IRQ_TYPE_LEVEL_LOW);
49 } else {
50 printk(KERN_ERR "rd88f5182_pci_preinit failed to "
51 "set_irq_type pin %d\n", pin);
52 gpio_free(gpio: pin);
53 }
54 } else {
55 printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
56 }
57
58 pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
59 if (gpio_request(gpio: pin, label: "PCI IntB") == 0) {
60 if (gpio_direction_input(gpio: pin) == 0) {
61 irq_set_irq_type(irq: gpio_to_irq(gpio: pin), type: IRQ_TYPE_LEVEL_LOW);
62 } else {
63 printk(KERN_ERR "rd88f5182_pci_preinit failed to "
64 "set_irq_type pin %d\n", pin);
65 gpio_free(gpio: pin);
66 }
67 } else {
68 printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
69 }
70}
71
72static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
73 u8 pin)
74{
75 int irq;
76
77 /*
78 * Check for devices with hard-wired IRQs.
79 */
80 irq = orion5x_pci_map_irq(dev, slot, pin);
81 if (irq != -1)
82 return irq;
83
84 /*
85 * PCI IRQs are connected via GPIOs
86 */
87 switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
88 case 0:
89 if (pin == 1)
90 return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
91 else
92 return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
93 default:
94 return -1;
95 }
96}
97
98static struct hw_pci rd88f5182_pci __initdata = {
99 .nr_controllers = 2,
100 .preinit = rd88f5182_pci_preinit,
101 .setup = orion5x_pci_sys_setup,
102 .scan = orion5x_pci_sys_scan_bus,
103 .map_irq = rd88f5182_pci_map_irq,
104};
105
106static int __init rd88f5182_pci_init(void)
107{
108 if (of_machine_is_compatible(compat: "marvell,rd-88f5182-nas"))
109 pci_common_init(&rd88f5182_pci);
110
111 return 0;
112}
113
114subsys_initcall(rd88f5182_pci_init);
115

source code of linux/arch/arm/mach-orion5x/board-rd88f5182.c