| 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * Versatile board support using the device tree |
| 4 | * |
| 5 | * Copyright (C) 2010 Secret Lab Technologies Ltd. |
| 6 | * Copyright (C) 2009 Jeremy Kerr <jeremy.kerr@canonical.com> |
| 7 | * Copyright (C) 2004 ARM Limited |
| 8 | * Copyright (C) 2000 Deep Blue Solutions Ltd |
| 9 | */ |
| 10 | |
| 11 | #include <linux/init.h> |
| 12 | #include <linux/io.h> |
| 13 | #include <linux/of.h> |
| 14 | #include <linux/of_address.h> |
| 15 | #include <linux/of_irq.h> |
| 16 | #include <linux/of_platform.h> |
| 17 | #include <linux/slab.h> |
| 18 | #include <linux/amba/bus.h> |
| 19 | #include <linux/amba/mmci.h> |
| 20 | #include <asm/mach-types.h> |
| 21 | #include <asm/mach/arch.h> |
| 22 | #include <asm/mach/map.h> |
| 23 | |
| 24 | /* macro to get at MMIO space when running virtually */ |
| 25 | #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) |
| 26 | #define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) |
| 27 | |
| 28 | /* |
| 29 | * ------------------------------------------------------------------------ |
| 30 | * Versatile Registers |
| 31 | * ------------------------------------------------------------------------ |
| 32 | */ |
| 33 | #define VERSATILE_SYS_PCICTL_OFFSET 0x44 |
| 34 | #define VERSATILE_SYS_MCI_OFFSET 0x48 |
| 35 | |
| 36 | /* |
| 37 | * VERSATILE peripheral addresses |
| 38 | */ |
| 39 | #define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */ |
| 40 | #define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */ |
| 41 | #define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ |
| 42 | |
| 43 | /* |
| 44 | * System controller bit assignment |
| 45 | */ |
| 46 | #define VERSATILE_REFCLK 0 |
| 47 | #define VERSATILE_TIMCLK 1 |
| 48 | |
| 49 | #define VERSATILE_TIMER1_EnSel 15 |
| 50 | #define VERSATILE_TIMER2_EnSel 17 |
| 51 | #define VERSATILE_TIMER3_EnSel 19 |
| 52 | #define VERSATILE_TIMER4_EnSel 21 |
| 53 | |
| 54 | static void __iomem *versatile_sys_base; |
| 55 | |
| 56 | static unsigned int mmc_status(struct device *dev) |
| 57 | { |
| 58 | struct amba_device *adev = container_of(dev, struct amba_device, dev); |
| 59 | u32 mask; |
| 60 | |
| 61 | if (adev->res.start == VERSATILE_MMCI0_BASE) |
| 62 | mask = 1; |
| 63 | else |
| 64 | mask = 2; |
| 65 | |
| 66 | return readl(addr: versatile_sys_base + VERSATILE_SYS_MCI_OFFSET) & mask; |
| 67 | } |
| 68 | |
| 69 | static struct mmci_platform_data mmc0_plat_data = { |
| 70 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 71 | .status = mmc_status, |
| 72 | }; |
| 73 | |
| 74 | static struct mmci_platform_data mmc1_plat_data = { |
| 75 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 76 | .status = mmc_status, |
| 77 | }; |
| 78 | |
| 79 | /* |
| 80 | * Lookup table for attaching a specific name and platform_data pointer to |
| 81 | * devices as they get created by of_platform_populate(). Ideally this table |
| 82 | * would not exist, but the current clock implementation depends on some devices |
| 83 | * having a specific name. |
| 84 | */ |
| 85 | struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { |
| 86 | OF_DEV_AUXDATA("arm,primecell" , VERSATILE_MMCI0_BASE, "fpga:05" , &mmc0_plat_data), |
| 87 | OF_DEV_AUXDATA("arm,primecell" , VERSATILE_MMCI1_BASE, "fpga:0b" , &mmc1_plat_data), |
| 88 | {} |
| 89 | }; |
| 90 | |
| 91 | static struct map_desc versatile_io_desc[] __initdata __maybe_unused = { |
| 92 | { |
| 93 | .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE), |
| 94 | .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE), |
| 95 | .length = SZ_4K * 9, |
| 96 | .type = MT_DEVICE |
| 97 | } |
| 98 | }; |
| 99 | |
| 100 | static void __init versatile_map_io(void) |
| 101 | { |
| 102 | debug_ll_io_init(); |
| 103 | iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc)); |
| 104 | } |
| 105 | |
| 106 | static void __init versatile_init_early(void) |
| 107 | { |
| 108 | u32 val; |
| 109 | |
| 110 | /* |
| 111 | * set clock frequency: |
| 112 | * VERSATILE_REFCLK is 32KHz |
| 113 | * VERSATILE_TIMCLK is 1MHz |
| 114 | */ |
| 115 | val = readl(__io_address(VERSATILE_SCTL_BASE)); |
| 116 | writel(val: (VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | |
| 117 | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | |
| 118 | (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | |
| 119 | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, |
| 120 | __io_address(VERSATILE_SCTL_BASE)); |
| 121 | } |
| 122 | |
| 123 | static void __init versatile_dt_pci_init(void) |
| 124 | { |
| 125 | u32 val; |
| 126 | struct device_node *np; |
| 127 | struct property *newprop; |
| 128 | |
| 129 | np = of_find_compatible_node(NULL, NULL, compat: "arm,versatile-pci" ); |
| 130 | if (!np) |
| 131 | return; |
| 132 | |
| 133 | /* Check if PCI backplane is detected */ |
| 134 | val = readl(addr: versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET); |
| 135 | if (val & 1) { |
| 136 | /* |
| 137 | * Enable PCI accesses. Note that the documentation is |
| 138 | * inconsistent whether or not this is needed, but the old |
| 139 | * driver had it so we will keep it. |
| 140 | */ |
| 141 | writel(val: 1, addr: versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET); |
| 142 | goto out_put_node; |
| 143 | } |
| 144 | |
| 145 | newprop = kzalloc(sizeof(*newprop), GFP_KERNEL); |
| 146 | if (!newprop) |
| 147 | goto out_put_node; |
| 148 | |
| 149 | newprop->name = kstrdup(s: "status" , GFP_KERNEL); |
| 150 | newprop->value = kstrdup(s: "disabled" , GFP_KERNEL); |
| 151 | newprop->length = sizeof("disabled" ); |
| 152 | of_update_property(np, newprop); |
| 153 | |
| 154 | pr_info("Not plugged into PCI backplane!\n" ); |
| 155 | |
| 156 | out_put_node: |
| 157 | of_node_put(node: np); |
| 158 | } |
| 159 | |
| 160 | static void __init versatile_dt_init(void) |
| 161 | { |
| 162 | struct device_node *np; |
| 163 | |
| 164 | np = of_find_compatible_node(NULL, NULL, compat: "arm,core-module-versatile" ); |
| 165 | if (np) |
| 166 | versatile_sys_base = of_iomap(node: np, index: 0); |
| 167 | WARN_ON(!versatile_sys_base); |
| 168 | |
| 169 | versatile_dt_pci_init(); |
| 170 | |
| 171 | of_platform_default_populate(NULL, lookup: versatile_auxdata_lookup, NULL); |
| 172 | } |
| 173 | |
| 174 | static const char *const versatile_dt_match[] __initconst = { |
| 175 | "arm,versatile-ab" , |
| 176 | "arm,versatile-pb" , |
| 177 | NULL, |
| 178 | }; |
| 179 | |
| 180 | DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)" ) |
| 181 | .map_io = versatile_map_io, |
| 182 | .init_early = versatile_init_early, |
| 183 | .init_machine = versatile_dt_init, |
| 184 | .dt_compat = versatile_dt_match, |
| 185 | MACHINE_END |
| 186 | |