1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Xilinx SLCR driver
4 *
5 * Copyright (c) 2011-2013 Xilinx Inc.
6 */
7
8#include <linux/io.h>
9#include <linux/reboot.h>
10#include <linux/mfd/syscon.h>
11#include <linux/of_address.h>
12#include <linux/regmap.h>
13#include "common.h"
14
15/* register offsets */
16#define SLCR_UNLOCK_OFFSET 0x8 /* SCLR unlock register */
17#define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset Control */
18#define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset Control */
19#define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */
20#define SLCR_PSS_IDCODE 0x530 /* PS IDCODE */
21#define SLCR_L2C_RAM 0xA1C /* L2C_RAM in AR#54190 */
22
23#define SLCR_UNLOCK_MAGIC 0xDF0D
24#define SLCR_A9_CPU_CLKSTOP 0x10
25#define SLCR_A9_CPU_RST 0x1
26#define SLCR_PSS_IDCODE_DEVICE_SHIFT 12
27#define SLCR_PSS_IDCODE_DEVICE_MASK 0x1F
28
29static void __iomem *zynq_slcr_base;
30static struct regmap *zynq_slcr_regmap;
31
32/**
33 * zynq_slcr_write - Write to a register in SLCR block
34 *
35 * @val: Value to write to the register
36 * @offset: Register offset in SLCR block
37 *
38 * Return: a negative value on error, 0 on success
39 */
40static int zynq_slcr_write(u32 val, u32 offset)
41{
42 return regmap_write(map: zynq_slcr_regmap, reg: offset, val);
43}
44
45/**
46 * zynq_slcr_read - Read a register in SLCR block
47 *
48 * @val: Pointer to value to be read from SLCR
49 * @offset: Register offset in SLCR block
50 *
51 * Return: a negative value on error, 0 on success
52 */
53static int zynq_slcr_read(u32 *val, u32 offset)
54{
55 return regmap_read(map: zynq_slcr_regmap, reg: offset, val);
56}
57
58/**
59 * zynq_slcr_unlock - Unlock SLCR registers
60 *
61 * Return: a negative value on error, 0 on success
62 */
63static inline int zynq_slcr_unlock(void)
64{
65 zynq_slcr_write(SLCR_UNLOCK_MAGIC, SLCR_UNLOCK_OFFSET);
66
67 return 0;
68}
69
70/**
71 * zynq_slcr_get_device_id - Read device code id
72 *
73 * Return: Device code id
74 */
75u32 zynq_slcr_get_device_id(void)
76{
77 u32 val;
78
79 zynq_slcr_read(val: &val, SLCR_PSS_IDCODE);
80 val >>= SLCR_PSS_IDCODE_DEVICE_SHIFT;
81 val &= SLCR_PSS_IDCODE_DEVICE_MASK;
82
83 return val;
84}
85
86/**
87 * zynq_slcr_system_restart - Restart the entire system.
88 *
89 * @nb: Pointer to restart notifier block (unused)
90 * @action: Reboot mode (unused)
91 * @data: Restart handler private data (unused)
92 *
93 * Return: 0 always
94 */
95static
96int zynq_slcr_system_restart(struct notifier_block *nb,
97 unsigned long action, void *data)
98{
99 u32 reboot;
100
101 /*
102 * Clear 0x0F000000 bits of reboot status register to workaround
103 * the FSBL not loading the bitstream after soft-reboot
104 * This is a temporary solution until we know more.
105 */
106 zynq_slcr_read(val: &reboot, SLCR_REBOOT_STATUS_OFFSET);
107 zynq_slcr_write(val: reboot & 0xF0FFFFFF, SLCR_REBOOT_STATUS_OFFSET);
108 zynq_slcr_write(val: 1, SLCR_PS_RST_CTRL_OFFSET);
109 return 0;
110}
111
112static struct notifier_block zynq_slcr_restart_nb = {
113 .notifier_call = zynq_slcr_system_restart,
114 .priority = 192,
115};
116
117/**
118 * zynq_slcr_cpu_start - Start cpu
119 * @cpu: cpu number
120 */
121void zynq_slcr_cpu_start(int cpu)
122{
123 u32 reg;
124
125 zynq_slcr_read(val: &reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
126 reg &= ~(SLCR_A9_CPU_RST << cpu);
127 zynq_slcr_write(val: reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
128 reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu);
129 zynq_slcr_write(val: reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
130
131 zynq_slcr_cpu_state_write(cpu, die: false);
132}
133
134/**
135 * zynq_slcr_cpu_stop - Stop cpu
136 * @cpu: cpu number
137 */
138void zynq_slcr_cpu_stop(int cpu)
139{
140 u32 reg;
141
142 zynq_slcr_read(val: &reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
143 reg |= (SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu;
144 zynq_slcr_write(val: reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
145}
146
147/**
148 * zynq_slcr_cpu_state_read - Read cpu state
149 * @cpu: cpu number
150 *
151 * SLCR_REBOOT_STATUS save upper 2 bits (31/30 cpu states for cpu0 and cpu1)
152 * 0 means cpu is running, 1 cpu is going to die.
153 *
154 * Return: true if cpu is running, false if cpu is going to die
155 */
156bool zynq_slcr_cpu_state_read(int cpu)
157{
158 u32 state;
159
160 state = readl(addr: zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
161 state &= 1 << (31 - cpu);
162
163 return !state;
164}
165
166/**
167 * zynq_slcr_cpu_state_write - Write cpu state
168 * @cpu: cpu number
169 * @die: cpu state - true if cpu is going to die
170 *
171 * SLCR_REBOOT_STATUS save upper 2 bits (31/30 cpu states for cpu0 and cpu1)
172 * 0 means cpu is running, 1 cpu is going to die.
173 */
174void zynq_slcr_cpu_state_write(int cpu, bool die)
175{
176 u32 state, mask;
177
178 state = readl(addr: zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
179 mask = 1 << (31 - cpu);
180 if (die)
181 state |= mask;
182 else
183 state &= ~mask;
184 writel(val: state, addr: zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
185}
186
187/**
188 * zynq_early_slcr_init - Early slcr init function
189 *
190 * Return: 0 on success, negative errno otherwise.
191 *
192 * Called very early during boot from platform code to unlock SLCR.
193 */
194int __init zynq_early_slcr_init(void)
195{
196 struct device_node *np;
197
198 np = of_find_compatible_node(NULL, NULL, compat: "xlnx,zynq-slcr");
199 if (!np) {
200 pr_err("%s: no slcr node found\n", __func__);
201 BUG();
202 }
203
204 zynq_slcr_base = of_iomap(node: np, index: 0);
205 if (!zynq_slcr_base) {
206 pr_err("%s: Unable to map I/O memory\n", __func__);
207 BUG();
208 }
209
210 np->data = (__force void *)zynq_slcr_base;
211
212 zynq_slcr_regmap = syscon_regmap_lookup_by_compatible(s: "xlnx,zynq-slcr");
213 if (IS_ERR(ptr: zynq_slcr_regmap)) {
214 pr_err("%s: failed to find zynq-slcr\n", __func__);
215 of_node_put(node: np);
216 return -ENODEV;
217 }
218
219 /* unlock the SLCR so that registers can be changed */
220 zynq_slcr_unlock();
221
222 /* See AR#54190 design advisory */
223 regmap_update_bits(map: zynq_slcr_regmap, SLCR_L2C_RAM, mask: 0x70707, val: 0x20202);
224
225 register_restart_handler(&zynq_slcr_restart_nb);
226
227 pr_info("%pOFn mapped to %p\n", np, zynq_slcr_base);
228
229 of_node_put(node: np);
230
231 return 0;
232}
233

source code of linux/arch/arm/mach-zynq/slcr.c