1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
4 *
5 * PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
6 *
7 * Heavily based on proc-arm926.S and proc-xsc3.S
8 */
9
10#include <linux/linkage.h>
11#include <linux/init.h>
12#include <linux/pgtable.h>
13#include <asm/assembler.h>
14#include <asm/hwcap.h>
15#include <asm/pgtable-hwdef.h>
16#include <asm/page.h>
17#include <asm/ptrace.h>
18#include "proc-macros.S"
19
20/*
21 * This is the maximum size of an area which will be flushed. If the
22 * area is larger than this, then we flush the whole cache.
23 */
24#define CACHE_DLIMIT 32768
25
26/*
27 * The cache line size of the L1 D cache.
28 */
29#define CACHE_DLINESIZE 32
30
31/*
32 * cpu_mohawk_proc_init()
33 */
34ENTRY(cpu_mohawk_proc_init)
35 ret lr
36
37/*
38 * cpu_mohawk_proc_fin()
39 */
40ENTRY(cpu_mohawk_proc_fin)
41 mrc p15, 0, r0, c1, c0, 0 @ ctrl register
42 bic r0, r0, #0x1800 @ ...iz...........
43 bic r0, r0, #0x0006 @ .............ca.
44 mcr p15, 0, r0, c1, c0, 0 @ disable caches
45 ret lr
46
47/*
48 * cpu_mohawk_reset(loc)
49 *
50 * Perform a soft reset of the system. Put the CPU into the
51 * same state as it would be if it had been reset, and branch
52 * to what would be the reset vector.
53 *
54 * loc: location to jump to for soft reset
55 *
56 * (same as arm926)
57 */
58 .align 5
59 .pushsection .idmap.text, "ax"
60ENTRY(cpu_mohawk_reset)
61 mov ip, #0
62 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
63 mcr p15, 0, ip, c7, c10, 4 @ drain WB
64 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
65 mrc p15, 0, ip, c1, c0, 0 @ ctrl register
66 bic ip, ip, #0x0007 @ .............cam
67 bic ip, ip, #0x1100 @ ...i...s........
68 mcr p15, 0, ip, c1, c0, 0 @ ctrl register
69 ret r0
70ENDPROC(cpu_mohawk_reset)
71 .popsection
72
73/*
74 * cpu_mohawk_do_idle()
75 *
76 * Called with IRQs disabled
77 */
78 .align 5
79ENTRY(cpu_mohawk_do_idle)
80 mov r0, #0
81 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
82 mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
83 ret lr
84
85/*
86 * flush_icache_all()
87 *
88 * Unconditionally clean and invalidate the entire icache.
89 */
90ENTRY(mohawk_flush_icache_all)
91 mov r0, #0
92 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
93 ret lr
94ENDPROC(mohawk_flush_icache_all)
95
96/*
97 * flush_user_cache_all()
98 *
99 * Clean and invalidate all cache entries in a particular
100 * address space.
101 */
102ENTRY(mohawk_flush_user_cache_all)
103 /* FALLTHROUGH */
104
105/*
106 * flush_kern_cache_all()
107 *
108 * Clean and invalidate the entire cache.
109 */
110ENTRY(mohawk_flush_kern_cache_all)
111 mov r2, #VM_EXEC
112 mov ip, #0
113__flush_whole_cache:
114 mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
115 tst r2, #VM_EXEC
116 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
117 mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer
118 ret lr
119
120/*
121 * flush_user_cache_range(start, end, flags)
122 *
123 * Clean and invalidate a range of cache entries in the
124 * specified address range.
125 *
126 * - start - start address (inclusive)
127 * - end - end address (exclusive)
128 * - flags - vm_flags describing address space
129 *
130 * (same as arm926)
131 */
132ENTRY(mohawk_flush_user_cache_range)
133 mov ip, #0
134 sub r3, r1, r0 @ calculate total size
135 cmp r3, #CACHE_DLIMIT
136 bgt __flush_whole_cache
1371: tst r2, #VM_EXEC
138 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
139 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
140 add r0, r0, #CACHE_DLINESIZE
141 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
142 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
143 add r0, r0, #CACHE_DLINESIZE
144 cmp r0, r1
145 blo 1b
146 tst r2, #VM_EXEC
147 mcrne p15, 0, ip, c7, c10, 4 @ drain WB
148 ret lr
149
150/*
151 * coherent_kern_range(start, end)
152 *
153 * Ensure coherency between the Icache and the Dcache in the
154 * region described by start, end. If you have non-snooping
155 * Harvard caches, you need to implement this function.
156 *
157 * - start - virtual start address
158 * - end - virtual end address
159 */
160ENTRY(mohawk_coherent_kern_range)
161 /* FALLTHROUGH */
162
163/*
164 * coherent_user_range(start, end)
165 *
166 * Ensure coherency between the Icache and the Dcache in the
167 * region described by start, end. If you have non-snooping
168 * Harvard caches, you need to implement this function.
169 *
170 * - start - virtual start address
171 * - end - virtual end address
172 *
173 * (same as arm926)
174 */
175ENTRY(mohawk_coherent_user_range)
176 bic r0, r0, #CACHE_DLINESIZE - 1
1771: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
178 mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
179 add r0, r0, #CACHE_DLINESIZE
180 cmp r0, r1
181 blo 1b
182 mcr p15, 0, r0, c7, c10, 4 @ drain WB
183 mov r0, #0
184 ret lr
185
186/*
187 * flush_kern_dcache_area(void *addr, size_t size)
188 *
189 * Ensure no D cache aliasing occurs, either with itself or
190 * the I cache
191 *
192 * - addr - kernel address
193 * - size - region size
194 */
195ENTRY(mohawk_flush_kern_dcache_area)
196 add r1, r0, r1
1971: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
198 add r0, r0, #CACHE_DLINESIZE
199 cmp r0, r1
200 blo 1b
201 mov r0, #0
202 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
203 mcr p15, 0, r0, c7, c10, 4 @ drain WB
204 ret lr
205
206/*
207 * dma_inv_range(start, end)
208 *
209 * Invalidate (discard) the specified virtual address range.
210 * May not write back any entries. If 'start' or 'end'
211 * are not cache line aligned, those lines must be written
212 * back.
213 *
214 * - start - virtual start address
215 * - end - virtual end address
216 *
217 * (same as v4wb)
218 */
219mohawk_dma_inv_range:
220 tst r0, #CACHE_DLINESIZE - 1
221 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
222 tst r1, #CACHE_DLINESIZE - 1
223 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
224 bic r0, r0, #CACHE_DLINESIZE - 1
2251: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
226 add r0, r0, #CACHE_DLINESIZE
227 cmp r0, r1
228 blo 1b
229 mcr p15, 0, r0, c7, c10, 4 @ drain WB
230 ret lr
231
232/*
233 * dma_clean_range(start, end)
234 *
235 * Clean the specified virtual address range.
236 *
237 * - start - virtual start address
238 * - end - virtual end address
239 *
240 * (same as v4wb)
241 */
242mohawk_dma_clean_range:
243 bic r0, r0, #CACHE_DLINESIZE - 1
2441: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
245 add r0, r0, #CACHE_DLINESIZE
246 cmp r0, r1
247 blo 1b
248 mcr p15, 0, r0, c7, c10, 4 @ drain WB
249 ret lr
250
251/*
252 * dma_flush_range(start, end)
253 *
254 * Clean and invalidate the specified virtual address range.
255 *
256 * - start - virtual start address
257 * - end - virtual end address
258 */
259ENTRY(mohawk_dma_flush_range)
260 bic r0, r0, #CACHE_DLINESIZE - 1
2611:
262 mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
263 add r0, r0, #CACHE_DLINESIZE
264 cmp r0, r1
265 blo 1b
266 mcr p15, 0, r0, c7, c10, 4 @ drain WB
267 ret lr
268
269/*
270 * dma_map_area(start, size, dir)
271 * - start - kernel virtual start address
272 * - size - size of region
273 * - dir - DMA direction
274 */
275ENTRY(mohawk_dma_map_area)
276 add r1, r1, r0
277 cmp r2, #DMA_TO_DEVICE
278 beq mohawk_dma_clean_range
279 bcs mohawk_dma_inv_range
280 b mohawk_dma_flush_range
281ENDPROC(mohawk_dma_map_area)
282
283/*
284 * dma_unmap_area(start, size, dir)
285 * - start - kernel virtual start address
286 * - size - size of region
287 * - dir - DMA direction
288 */
289ENTRY(mohawk_dma_unmap_area)
290 ret lr
291ENDPROC(mohawk_dma_unmap_area)
292
293 .globl mohawk_flush_kern_cache_louis
294 .equ mohawk_flush_kern_cache_louis, mohawk_flush_kern_cache_all
295
296 @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
297 define_cache_functions mohawk
298
299ENTRY(cpu_mohawk_dcache_clean_area)
3001: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
301 add r0, r0, #CACHE_DLINESIZE
302 subs r1, r1, #CACHE_DLINESIZE
303 bhi 1b
304 mcr p15, 0, r0, c7, c10, 4 @ drain WB
305 ret lr
306
307/*
308 * cpu_mohawk_switch_mm(pgd)
309 *
310 * Set the translation base pointer to be as described by pgd.
311 *
312 * pgd: new page tables
313 */
314 .align 5
315ENTRY(cpu_mohawk_switch_mm)
316 mov ip, #0
317 mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
318 mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
319 mcr p15, 0, ip, c7, c10, 4 @ drain WB
320 orr r0, r0, #0x18 @ cache the page table in L2
321 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
322 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
323 ret lr
324
325/*
326 * cpu_mohawk_set_pte_ext(ptep, pte, ext)
327 *
328 * Set a PTE and flush it out
329 */
330 .align 5
331ENTRY(cpu_mohawk_set_pte_ext)
332#ifdef CONFIG_MMU
333 armv3_set_pte_ext
334 mov r0, r0
335 mcr p15, 0, r0, c7, c10, 1 @ clean D entry
336 mcr p15, 0, r0, c7, c10, 4 @ drain WB
337 ret lr
338#endif
339
340.globl cpu_mohawk_suspend_size
341.equ cpu_mohawk_suspend_size, 4 * 6
342#ifdef CONFIG_ARM_CPU_SUSPEND
343ENTRY(cpu_mohawk_do_suspend)
344 stmfd sp!, {r4 - r9, lr}
345 mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
346 mrc p15, 0, r5, c15, c1, 0 @ CP access reg
347 mrc p15, 0, r6, c13, c0, 0 @ PID
348 mrc p15, 0, r7, c3, c0, 0 @ domain ID
349 mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
350 mrc p15, 0, r9, c1, c0, 0 @ control reg
351 bic r4, r4, #2 @ clear frequency change bit
352 stmia r0, {r4 - r9} @ store cp regs
353 ldmia sp!, {r4 - r9, pc}
354ENDPROC(cpu_mohawk_do_suspend)
355
356ENTRY(cpu_mohawk_do_resume)
357 ldmia r0, {r4 - r9} @ load cp regs
358 mov ip, #0
359 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
360 mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
361 mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer
362 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
363 mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
364 mcr p15, 0, r5, c15, c1, 0 @ CP access reg
365 mcr p15, 0, r6, c13, c0, 0 @ PID
366 mcr p15, 0, r7, c3, c0, 0 @ domain ID
367 orr r1, r1, #0x18 @ cache the page table in L2
368 mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
369 mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
370 mov r0, r9 @ control register
371 b cpu_resume_mmu
372ENDPROC(cpu_mohawk_do_resume)
373#endif
374
375 .type __mohawk_setup, #function
376__mohawk_setup:
377 mov r0, #0
378 mcr p15, 0, r0, c7, c7 @ invalidate I,D caches
379 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
380 mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs
381 orr r4, r4, #0x18 @ cache the page table in L2
382 mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
383
384 mov r0, #0 @ don't allow CP access
385 mcr p15, 0, r0, c15, c1, 0 @ write CP access register
386
387 adr r5, mohawk_crval
388 ldmia r5, {r5, r6}
389 mrc p15, 0, r0, c1, c0 @ get control register
390 bic r0, r0, r5
391 orr r0, r0, r6
392 ret lr
393
394 .size __mohawk_setup, . - __mohawk_setup
395
396 /*
397 * R
398 * .RVI ZFRS BLDP WCAM
399 * .011 1001 ..00 0101
400 *
401 */
402 .type mohawk_crval, #object
403mohawk_crval:
404 crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
405
406 __INITDATA
407
408 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
409 define_processor_functions mohawk, dabort=v5t_early_abort, pabort=legacy_pabort
410
411 .section ".rodata"
412
413 string cpu_arch_name, "armv5te"
414 string cpu_elf_name, "v5"
415 string cpu_mohawk_name, "Marvell 88SV331x"
416
417 .align
418
419 .section ".proc.info.init", "a"
420
421 .type __88sv331x_proc_info,#object
422__88sv331x_proc_info:
423 .long 0x56158000 @ Marvell 88SV331x (MOHAWK)
424 .long 0xfffff000
425 .long PMD_TYPE_SECT | \
426 PMD_SECT_BUFFERABLE | \
427 PMD_SECT_CACHEABLE | \
428 PMD_BIT4 | \
429 PMD_SECT_AP_WRITE | \
430 PMD_SECT_AP_READ
431 .long PMD_TYPE_SECT | \
432 PMD_BIT4 | \
433 PMD_SECT_AP_WRITE | \
434 PMD_SECT_AP_READ
435 initfn __mohawk_setup, __88sv331x_proc_info
436 .long cpu_arch_name
437 .long cpu_elf_name
438 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
439 .long cpu_mohawk_name
440 .long mohawk_processor_functions
441 .long v4wbi_tlb_fns
442 .long v4wb_user_fns
443 .long mohawk_cache_fns
444 .size __88sv331x_proc_info, . - __88sv331x_proc_info
445

source code of linux/arch/arm/mm/proc-mohawk.S