1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * linux/arch/arm/mm/proc-sa110.S
4 *
5 * Copyright (C) 1997-2002 Russell King
6 * hacked for non-paged-MM by Hyok S. Choi, 2003.
7 *
8 * MMU functions for SA110
9 *
10 * These are the low level assembler for performing cache and TLB
11 * functions on the StrongARM-110.
12 */
13#include <linux/linkage.h>
14#include <linux/init.h>
15#include <linux/pgtable.h>
16#include <asm/assembler.h>
17#include <asm/asm-offsets.h>
18#include <asm/hwcap.h>
19#include <mach/hardware.h>
20#include <asm/pgtable-hwdef.h>
21#include <asm/ptrace.h>
22
23#include "proc-macros.S"
24
25/*
26 * the cache line size of the I and D cache
27 */
28#define DCACHELINESIZE 32
29
30 .text
31
32/*
33 * cpu_sa110_proc_init()
34 */
35ENTRY(cpu_sa110_proc_init)
36 mov r0, #0
37 mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching
38 ret lr
39
40/*
41 * cpu_sa110_proc_fin()
42 */
43ENTRY(cpu_sa110_proc_fin)
44 mov r0, #0
45 mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching
46 mrc p15, 0, r0, c1, c0, 0 @ ctrl register
47 bic r0, r0, #0x1000 @ ...i............
48 bic r0, r0, #0x000e @ ............wca.
49 mcr p15, 0, r0, c1, c0, 0 @ disable caches
50 ret lr
51
52/*
53 * cpu_sa110_reset(loc)
54 *
55 * Perform a soft reset of the system. Put the CPU into the
56 * same state as it would be if it had been reset, and branch
57 * to what would be the reset vector.
58 *
59 * loc: location to jump to for soft reset
60 */
61 .align 5
62 .pushsection .idmap.text, "ax"
63ENTRY(cpu_sa110_reset)
64 mov ip, #0
65 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
66 mcr p15, 0, ip, c7, c10, 4 @ drain WB
67#ifdef CONFIG_MMU
68 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
69#endif
70 mrc p15, 0, ip, c1, c0, 0 @ ctrl register
71 bic ip, ip, #0x000f @ ............wcam
72 bic ip, ip, #0x1100 @ ...i...s........
73 mcr p15, 0, ip, c1, c0, 0 @ ctrl register
74 ret r0
75ENDPROC(cpu_sa110_reset)
76 .popsection
77
78/*
79 * cpu_sa110_do_idle(type)
80 *
81 * Cause the processor to idle
82 *
83 * type: call type:
84 * 0 = slow idle
85 * 1 = fast idle
86 * 2 = switch to slow processor clock
87 * 3 = switch to fast processor clock
88 */
89 .align 5
90
91ENTRY(cpu_sa110_do_idle)
92 mcr p15, 0, ip, c15, c2, 2 @ disable clock switching
93 ldr r1, =UNCACHEABLE_ADDR @ load from uncacheable loc
94 ldr r1, [r1, #0] @ force switch to MCLK
95 mov r0, r0 @ safety
96 mov r0, r0 @ safety
97 mov r0, r0 @ safety
98 mcr p15, 0, r0, c15, c8, 2 @ Wait for interrupt, cache aligned
99 mov r0, r0 @ safety
100 mov r0, r0 @ safety
101 mov r0, r0 @ safety
102 mcr p15, 0, r0, c15, c1, 2 @ enable clock switching
103 ret lr
104
105/* ================================= CACHE ================================ */
106
107/*
108 * cpu_sa110_dcache_clean_area(addr,sz)
109 *
110 * Clean the specified entry of any caches such that the MMU
111 * translation fetches will obtain correct data.
112 *
113 * addr: cache-unaligned virtual address
114 */
115 .align 5
116ENTRY(cpu_sa110_dcache_clean_area)
1171: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
118 add r0, r0, #DCACHELINESIZE
119 subs r1, r1, #DCACHELINESIZE
120 bhi 1b
121 ret lr
122
123/* =============================== PageTable ============================== */
124
125/*
126 * cpu_sa110_switch_mm(pgd)
127 *
128 * Set the translation base pointer to be as described by pgd.
129 *
130 * pgd: new page tables
131 */
132 .align 5
133ENTRY(cpu_sa110_switch_mm)
134#ifdef CONFIG_MMU
135 str lr, [sp, #-4]!
136 bl v4wb_flush_kern_cache_all @ clears IP
137 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
138 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
139 ldr pc, [sp], #4
140#else
141 ret lr
142#endif
143
144/*
145 * cpu_sa110_set_pte_ext(ptep, pte, ext)
146 *
147 * Set a PTE and flush it out
148 */
149 .align 5
150ENTRY(cpu_sa110_set_pte_ext)
151#ifdef CONFIG_MMU
152 armv3_set_pte_ext wc_disable=0
153 mov r0, r0
154 mcr p15, 0, r0, c7, c10, 1 @ clean D entry
155 mcr p15, 0, r0, c7, c10, 4 @ drain WB
156#endif
157 ret lr
158
159 .type __sa110_setup, #function
160__sa110_setup:
161 mov r10, #0
162 mcr p15, 0, r10, c7, c7 @ invalidate I,D caches on v4
163 mcr p15, 0, r10, c7, c10, 4 @ drain write buffer on v4
164#ifdef CONFIG_MMU
165 mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4
166#endif
167
168 adr r5, sa110_crval
169 ldmia r5, {r5, r6}
170 mrc p15, 0, r0, c1, c0 @ get control register v4
171 bic r0, r0, r5
172 orr r0, r0, r6
173 ret lr
174 .size __sa110_setup, . - __sa110_setup
175
176 /*
177 * R
178 * .RVI ZFRS BLDP WCAM
179 * ..01 0001 ..11 1101
180 *
181 */
182 .type sa110_crval, #object
183sa110_crval:
184 crval clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130
185
186 __INITDATA
187
188 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
189 define_processor_functions sa110, dabort=v4_early_abort, pabort=legacy_pabort
190
191 .section ".rodata"
192
193 string cpu_arch_name, "armv4"
194 string cpu_elf_name, "v4"
195 string cpu_sa110_name, "StrongARM-110"
196
197 .align
198
199 .section ".proc.info.init", "a"
200
201 .type __sa110_proc_info,#object
202__sa110_proc_info:
203 .long 0x4401a100
204 .long 0xfffffff0
205 .long PMD_TYPE_SECT | \
206 PMD_SECT_BUFFERABLE | \
207 PMD_SECT_CACHEABLE | \
208 PMD_SECT_AP_WRITE | \
209 PMD_SECT_AP_READ
210 .long PMD_TYPE_SECT | \
211 PMD_SECT_AP_WRITE | \
212 PMD_SECT_AP_READ
213 initfn __sa110_setup, __sa110_proc_info
214 .long cpu_arch_name
215 .long cpu_elf_name
216 .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
217 .long cpu_sa110_name
218 .long sa110_processor_functions
219 .long v4wb_tlb_fns
220 .long v4wb_user_fns
221 .long v4wb_cache_fns
222 .size __sa110_proc_info, . - __sa110_proc_info
223

source code of linux/arch/arm/mm/proc-sa110.S