1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * arch/sh/mm/tlb-sh3.c
4 *
5 * SH-3 specific TLB operations
6 *
7 * Copyright (C) 1999 Niibe Yutaka
8 * Copyright (C) 2002 Paul Mundt
9 */
10#include <linux/signal.h>
11#include <linux/sched.h>
12#include <linux/kernel.h>
13#include <linux/errno.h>
14#include <linux/string.h>
15#include <linux/types.h>
16#include <linux/ptrace.h>
17#include <linux/mman.h>
18#include <linux/mm.h>
19#include <linux/smp.h>
20#include <linux/interrupt.h>
21
22#include <asm/io.h>
23#include <linux/uaccess.h>
24#include <asm/mmu_context.h>
25#include <asm/cacheflush.h>
26
27void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
28{
29 unsigned long flags, pteval, vpn;
30
31 /*
32 * Handle debugger faulting in for debugee.
33 */
34 if (vma && current->active_mm != vma->vm_mm)
35 return;
36
37 local_irq_save(flags);
38
39 /* Set PTEH register */
40 vpn = (address & MMU_VPN_MASK) | get_asid();
41 __raw_writel(val: vpn, addr: MMU_PTEH);
42
43 pteval = pte_val(pte);
44
45 /* Set PTEL register */
46 pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
47 /* conveniently, we want all the software flags to be 0 anyway */
48 __raw_writel(val: pteval, addr: MMU_PTEL);
49
50 /* Load the TLB */
51 asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
52 local_irq_restore(flags);
53}
54
55void local_flush_tlb_one(unsigned long asid, unsigned long page)
56{
57 unsigned long addr, data;
58 int i, ways = MMU_NTLB_WAYS;
59
60 /*
61 * NOTE: PTEH.ASID should be set to this MM
62 * _AND_ we need to write ASID to the array.
63 *
64 * It would be simple if we didn't need to set PTEH.ASID...
65 */
66 addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000);
67 data = (page & 0xfffe0000) | asid; /* VALID bit is off */
68
69 if ((current_cpu_data.flags & CPU_HAS_MMU_PAGE_ASSOC)) {
70 addr |= MMU_PAGE_ASSOC_BIT;
71 ways = 1; /* we already know the way .. */
72 }
73
74 for (i = 0; i < ways; i++)
75 __raw_writel(val: data, addr: addr + (i << 8));
76}
77
78void local_flush_tlb_all(void)
79{
80 unsigned long flags, status;
81
82 /*
83 * Flush all the TLB.
84 *
85 * Write to the MMU control register's bit:
86 * TF-bit for SH-3, TI-bit for SH-4.
87 * It's same position, bit #2.
88 */
89 local_irq_save(flags);
90 status = __raw_readl(addr: MMUCR);
91 status |= 0x04;
92 __raw_writel(val: status, addr: MMUCR);
93 ctrl_barrier();
94 local_irq_restore(flags);
95}
96

source code of linux/arch/sh/mm/tlb-sh3.c