| 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * USB HID support for Linux |
| 4 | * |
| 5 | * Copyright (c) 1999 Andreas Gal |
| 6 | * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> |
| 7 | * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc |
| 8 | * Copyright (c) 2007-2008 Oliver Neukum |
| 9 | * Copyright (c) 2006-2010 Jiri Kosina |
| 10 | */ |
| 11 | |
| 12 | /* |
| 13 | */ |
| 14 | |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/slab.h> |
| 17 | #include <linux/init.h> |
| 18 | #include <linux/kernel.h> |
| 19 | #include <linux/list.h> |
| 20 | #include <linux/mm.h> |
| 21 | #include <linux/mutex.h> |
| 22 | #include <linux/property.h> |
| 23 | #include <linux/spinlock.h> |
| 24 | #include <linux/unaligned.h> |
| 25 | #include <asm/byteorder.h> |
| 26 | #include <linux/input.h> |
| 27 | #include <linux/wait.h> |
| 28 | #include <linux/workqueue.h> |
| 29 | #include <linux/string.h> |
| 30 | |
| 31 | #include <linux/usb.h> |
| 32 | |
| 33 | #include <linux/hid.h> |
| 34 | #include <linux/hiddev.h> |
| 35 | #include <linux/hid-debug.h> |
| 36 | #include <linux/hidraw.h> |
| 37 | #include "usbhid.h" |
| 38 | #include "hid-pidff.h" |
| 39 | |
| 40 | /* |
| 41 | * Version Information |
| 42 | */ |
| 43 | |
| 44 | #define DRIVER_DESC "USB HID core driver" |
| 45 | |
| 46 | /* |
| 47 | * Module parameters. |
| 48 | */ |
| 49 | |
| 50 | static unsigned int hid_mousepoll_interval; |
| 51 | module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644); |
| 52 | MODULE_PARM_DESC(mousepoll, "Polling interval of mice" ); |
| 53 | |
| 54 | static unsigned int hid_jspoll_interval; |
| 55 | module_param_named(jspoll, hid_jspoll_interval, uint, 0644); |
| 56 | MODULE_PARM_DESC(jspoll, "Polling interval of joysticks" ); |
| 57 | |
| 58 | static unsigned int hid_kbpoll_interval; |
| 59 | module_param_named(kbpoll, hid_kbpoll_interval, uint, 0644); |
| 60 | MODULE_PARM_DESC(kbpoll, "Polling interval of keyboards" ); |
| 61 | |
| 62 | static unsigned int ignoreled; |
| 63 | module_param_named(ignoreled, ignoreled, uint, 0644); |
| 64 | MODULE_PARM_DESC(ignoreled, "Autosuspend with active leds" ); |
| 65 | |
| 66 | /* Quirks specified at module load time */ |
| 67 | static char *quirks_param[MAX_USBHID_BOOT_QUIRKS]; |
| 68 | module_param_array_named(quirks, quirks_param, charp, NULL, 0444); |
| 69 | MODULE_PARM_DESC(quirks, "Add/modify USB HID quirks by specifying " |
| 70 | " quirks=vendorID:productID:quirks" |
| 71 | " where vendorID, productID, and quirks are all in" |
| 72 | " 0x-prefixed hex" ); |
| 73 | /* |
| 74 | * Input submission and I/O error handler. |
| 75 | */ |
| 76 | static void hid_io_error(struct hid_device *hid); |
| 77 | static int hid_submit_out(struct hid_device *hid); |
| 78 | static int hid_submit_ctrl(struct hid_device *hid); |
| 79 | static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid); |
| 80 | |
| 81 | /* Start up the input URB */ |
| 82 | static int hid_start_in(struct hid_device *hid) |
| 83 | { |
| 84 | unsigned long flags; |
| 85 | int rc = 0; |
| 86 | struct usbhid_device *usbhid = hid->driver_data; |
| 87 | |
| 88 | spin_lock_irqsave(&usbhid->lock, flags); |
| 89 | if (test_bit(HID_IN_POLLING, &usbhid->iofl) && |
| 90 | !test_bit(HID_DISCONNECTED, &usbhid->iofl) && |
| 91 | !test_bit(HID_SUSPENDED, &usbhid->iofl) && |
| 92 | !test_and_set_bit(HID_IN_RUNNING, addr: &usbhid->iofl)) { |
| 93 | rc = usb_submit_urb(urb: usbhid->urbin, GFP_ATOMIC); |
| 94 | if (rc != 0) { |
| 95 | clear_bit(HID_IN_RUNNING, addr: &usbhid->iofl); |
| 96 | if (rc == -ENOSPC) |
| 97 | set_bit(HID_NO_BANDWIDTH, addr: &usbhid->iofl); |
| 98 | } else { |
| 99 | clear_bit(HID_NO_BANDWIDTH, addr: &usbhid->iofl); |
| 100 | } |
| 101 | } |
| 102 | spin_unlock_irqrestore(lock: &usbhid->lock, flags); |
| 103 | return rc; |
| 104 | } |
| 105 | |
| 106 | /* I/O retry timer routine */ |
| 107 | static void hid_retry_timeout(struct timer_list *t) |
| 108 | { |
| 109 | struct usbhid_device *usbhid = timer_container_of(usbhid, t, io_retry); |
| 110 | struct hid_device *hid = usbhid->hid; |
| 111 | |
| 112 | dev_dbg(&usbhid->intf->dev, "retrying intr urb\n" ); |
| 113 | if (hid_start_in(hid)) |
| 114 | hid_io_error(hid); |
| 115 | } |
| 116 | |
| 117 | /* Workqueue routine to reset the device or clear a halt */ |
| 118 | static void hid_reset(struct work_struct *work) |
| 119 | { |
| 120 | struct usbhid_device *usbhid = |
| 121 | container_of(work, struct usbhid_device, reset_work); |
| 122 | struct hid_device *hid = usbhid->hid; |
| 123 | int rc; |
| 124 | |
| 125 | if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) { |
| 126 | dev_dbg(&usbhid->intf->dev, "clear halt\n" ); |
| 127 | rc = usb_clear_halt(hid_to_usb_dev(hid), pipe: usbhid->urbin->pipe); |
| 128 | clear_bit(HID_CLEAR_HALT, addr: &usbhid->iofl); |
| 129 | if (rc == 0) { |
| 130 | hid_start_in(hid); |
| 131 | } else { |
| 132 | dev_dbg(&usbhid->intf->dev, |
| 133 | "clear-halt failed: %d\n" , rc); |
| 134 | set_bit(HID_RESET_PENDING, addr: &usbhid->iofl); |
| 135 | } |
| 136 | } |
| 137 | |
| 138 | if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) { |
| 139 | dev_dbg(&usbhid->intf->dev, "resetting device\n" ); |
| 140 | usb_queue_reset_device(dev: usbhid->intf); |
| 141 | } |
| 142 | } |
| 143 | |
| 144 | /* Main I/O error handler */ |
| 145 | static void hid_io_error(struct hid_device *hid) |
| 146 | { |
| 147 | unsigned long flags; |
| 148 | struct usbhid_device *usbhid = hid->driver_data; |
| 149 | |
| 150 | spin_lock_irqsave(&usbhid->lock, flags); |
| 151 | |
| 152 | /* Stop when disconnected */ |
| 153 | if (test_bit(HID_DISCONNECTED, &usbhid->iofl)) |
| 154 | goto done; |
| 155 | |
| 156 | /* If it has been a while since the last error, we'll assume |
| 157 | * this a brand new error and reset the retry timeout. */ |
| 158 | if (time_after(jiffies, usbhid->stop_retry + HZ/2)) |
| 159 | usbhid->retry_delay = 0; |
| 160 | |
| 161 | /* When an error occurs, retry at increasing intervals */ |
| 162 | if (usbhid->retry_delay == 0) { |
| 163 | usbhid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */ |
| 164 | usbhid->stop_retry = jiffies + msecs_to_jiffies(m: 1000); |
| 165 | } else if (usbhid->retry_delay < 100) |
| 166 | usbhid->retry_delay *= 2; |
| 167 | |
| 168 | if (time_after(jiffies, usbhid->stop_retry)) { |
| 169 | |
| 170 | /* Retries failed, so do a port reset unless we lack bandwidth*/ |
| 171 | if (!test_bit(HID_NO_BANDWIDTH, &usbhid->iofl) |
| 172 | && !test_and_set_bit(HID_RESET_PENDING, addr: &usbhid->iofl)) { |
| 173 | |
| 174 | schedule_work(work: &usbhid->reset_work); |
| 175 | goto done; |
| 176 | } |
| 177 | } |
| 178 | |
| 179 | mod_timer(timer: &usbhid->io_retry, |
| 180 | expires: jiffies + msecs_to_jiffies(m: usbhid->retry_delay)); |
| 181 | done: |
| 182 | spin_unlock_irqrestore(lock: &usbhid->lock, flags); |
| 183 | } |
| 184 | |
| 185 | static void usbhid_mark_busy(struct usbhid_device *usbhid) |
| 186 | { |
| 187 | struct usb_interface *intf = usbhid->intf; |
| 188 | |
| 189 | usb_mark_last_busy(interface_to_usbdev(intf)); |
| 190 | } |
| 191 | |
| 192 | static int usbhid_restart_out_queue(struct usbhid_device *usbhid) |
| 193 | { |
| 194 | struct hid_device *hid = usb_get_intfdata(intf: usbhid->intf); |
| 195 | int kicked; |
| 196 | int r; |
| 197 | |
| 198 | if (!hid || test_bit(HID_RESET_PENDING, &usbhid->iofl) || |
| 199 | test_bit(HID_SUSPENDED, &usbhid->iofl)) |
| 200 | return 0; |
| 201 | |
| 202 | if ((kicked = (usbhid->outhead != usbhid->outtail))) { |
| 203 | hid_dbg(hid, "Kicking head %d tail %d" , usbhid->outhead, usbhid->outtail); |
| 204 | |
| 205 | /* Try to wake up from autosuspend... */ |
| 206 | r = usb_autopm_get_interface_async(intf: usbhid->intf); |
| 207 | if (r < 0) |
| 208 | return r; |
| 209 | |
| 210 | /* |
| 211 | * If still suspended, don't submit. Submission will |
| 212 | * occur if/when resume drains the queue. |
| 213 | */ |
| 214 | if (test_bit(HID_SUSPENDED, &usbhid->iofl)) { |
| 215 | usb_autopm_put_interface_no_suspend(intf: usbhid->intf); |
| 216 | return r; |
| 217 | } |
| 218 | |
| 219 | /* Asynchronously flush queue. */ |
| 220 | set_bit(HID_OUT_RUNNING, addr: &usbhid->iofl); |
| 221 | if (hid_submit_out(hid)) { |
| 222 | clear_bit(HID_OUT_RUNNING, addr: &usbhid->iofl); |
| 223 | usb_autopm_put_interface_async(intf: usbhid->intf); |
| 224 | } |
| 225 | wake_up(&usbhid->wait); |
| 226 | } |
| 227 | return kicked; |
| 228 | } |
| 229 | |
| 230 | static int usbhid_restart_ctrl_queue(struct usbhid_device *usbhid) |
| 231 | { |
| 232 | struct hid_device *hid = usb_get_intfdata(intf: usbhid->intf); |
| 233 | int kicked; |
| 234 | int r; |
| 235 | |
| 236 | WARN_ON(hid == NULL); |
| 237 | if (!hid || test_bit(HID_RESET_PENDING, &usbhid->iofl) || |
| 238 | test_bit(HID_SUSPENDED, &usbhid->iofl)) |
| 239 | return 0; |
| 240 | |
| 241 | if ((kicked = (usbhid->ctrlhead != usbhid->ctrltail))) { |
| 242 | hid_dbg(hid, "Kicking head %d tail %d" , usbhid->ctrlhead, usbhid->ctrltail); |
| 243 | |
| 244 | /* Try to wake up from autosuspend... */ |
| 245 | r = usb_autopm_get_interface_async(intf: usbhid->intf); |
| 246 | if (r < 0) |
| 247 | return r; |
| 248 | |
| 249 | /* |
| 250 | * If still suspended, don't submit. Submission will |
| 251 | * occur if/when resume drains the queue. |
| 252 | */ |
| 253 | if (test_bit(HID_SUSPENDED, &usbhid->iofl)) { |
| 254 | usb_autopm_put_interface_no_suspend(intf: usbhid->intf); |
| 255 | return r; |
| 256 | } |
| 257 | |
| 258 | /* Asynchronously flush queue. */ |
| 259 | set_bit(HID_CTRL_RUNNING, addr: &usbhid->iofl); |
| 260 | if (hid_submit_ctrl(hid)) { |
| 261 | clear_bit(HID_CTRL_RUNNING, addr: &usbhid->iofl); |
| 262 | usb_autopm_put_interface_async(intf: usbhid->intf); |
| 263 | } |
| 264 | wake_up(&usbhid->wait); |
| 265 | } |
| 266 | return kicked; |
| 267 | } |
| 268 | |
| 269 | /* |
| 270 | * Input interrupt completion handler. |
| 271 | */ |
| 272 | |
| 273 | static void hid_irq_in(struct urb *urb) |
| 274 | { |
| 275 | struct hid_device *hid = urb->context; |
| 276 | struct usbhid_device *usbhid = hid->driver_data; |
| 277 | int status; |
| 278 | |
| 279 | switch (urb->status) { |
| 280 | case 0: /* success */ |
| 281 | usbhid->retry_delay = 0; |
| 282 | if (!test_bit(HID_OPENED, &usbhid->iofl)) |
| 283 | break; |
| 284 | usbhid_mark_busy(usbhid); |
| 285 | if (!test_bit(HID_RESUME_RUNNING, &usbhid->iofl)) { |
| 286 | hid_input_report(hid: urb->context, type: HID_INPUT_REPORT, |
| 287 | data: urb->transfer_buffer, |
| 288 | size: urb->actual_length, interrupt: 1); |
| 289 | /* |
| 290 | * autosuspend refused while keys are pressed |
| 291 | * because most keyboards don't wake up when |
| 292 | * a key is released |
| 293 | */ |
| 294 | if (hid_check_keys_pressed(hid)) |
| 295 | set_bit(HID_KEYS_PRESSED, addr: &usbhid->iofl); |
| 296 | else |
| 297 | clear_bit(HID_KEYS_PRESSED, addr: &usbhid->iofl); |
| 298 | } |
| 299 | break; |
| 300 | case -EPIPE: /* stall */ |
| 301 | usbhid_mark_busy(usbhid); |
| 302 | clear_bit(HID_IN_RUNNING, addr: &usbhid->iofl); |
| 303 | set_bit(HID_CLEAR_HALT, addr: &usbhid->iofl); |
| 304 | schedule_work(work: &usbhid->reset_work); |
| 305 | return; |
| 306 | case -ECONNRESET: /* unlink */ |
| 307 | case -ENOENT: |
| 308 | case -ESHUTDOWN: /* unplug */ |
| 309 | clear_bit(HID_IN_RUNNING, addr: &usbhid->iofl); |
| 310 | return; |
| 311 | case -EILSEQ: /* protocol error or unplug */ |
| 312 | case -EPROTO: /* protocol error or unplug */ |
| 313 | case -ETIME: /* protocol error or unplug */ |
| 314 | case -ETIMEDOUT: /* Should never happen, but... */ |
| 315 | usbhid_mark_busy(usbhid); |
| 316 | clear_bit(HID_IN_RUNNING, addr: &usbhid->iofl); |
| 317 | hid_io_error(hid); |
| 318 | return; |
| 319 | default: /* error */ |
| 320 | hid_warn(urb->dev, "input irq status %d received\n" , |
| 321 | urb->status); |
| 322 | } |
| 323 | |
| 324 | status = usb_submit_urb(urb, GFP_ATOMIC); |
| 325 | if (status) { |
| 326 | clear_bit(HID_IN_RUNNING, addr: &usbhid->iofl); |
| 327 | if (status != -EPERM) { |
| 328 | hid_err(hid, "can't resubmit intr, %s-%s/input%d, status %d\n" , |
| 329 | hid_to_usb_dev(hid)->bus->bus_name, |
| 330 | hid_to_usb_dev(hid)->devpath, |
| 331 | usbhid->ifnum, status); |
| 332 | hid_io_error(hid); |
| 333 | } |
| 334 | } |
| 335 | } |
| 336 | |
| 337 | static int hid_submit_out(struct hid_device *hid) |
| 338 | { |
| 339 | struct hid_report *report; |
| 340 | char *raw_report; |
| 341 | struct usbhid_device *usbhid = hid->driver_data; |
| 342 | int r; |
| 343 | |
| 344 | report = usbhid->out[usbhid->outtail].report; |
| 345 | raw_report = usbhid->out[usbhid->outtail].raw_report; |
| 346 | |
| 347 | usbhid->urbout->transfer_buffer_length = hid_report_len(report); |
| 348 | usbhid->urbout->dev = hid_to_usb_dev(hid); |
| 349 | if (raw_report) { |
| 350 | memcpy(usbhid->outbuf, raw_report, |
| 351 | usbhid->urbout->transfer_buffer_length); |
| 352 | kfree(objp: raw_report); |
| 353 | usbhid->out[usbhid->outtail].raw_report = NULL; |
| 354 | } |
| 355 | |
| 356 | dbg_hid("submitting out urb\n" ); |
| 357 | |
| 358 | r = usb_submit_urb(urb: usbhid->urbout, GFP_ATOMIC); |
| 359 | if (r < 0) { |
| 360 | hid_err(hid, "usb_submit_urb(out) failed: %d\n" , r); |
| 361 | return r; |
| 362 | } |
| 363 | usbhid->last_out = jiffies; |
| 364 | return 0; |
| 365 | } |
| 366 | |
| 367 | static int hid_submit_ctrl(struct hid_device *hid) |
| 368 | { |
| 369 | struct hid_report *report; |
| 370 | unsigned char dir; |
| 371 | char *raw_report; |
| 372 | int len, r; |
| 373 | struct usbhid_device *usbhid = hid->driver_data; |
| 374 | |
| 375 | report = usbhid->ctrl[usbhid->ctrltail].report; |
| 376 | raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report; |
| 377 | dir = usbhid->ctrl[usbhid->ctrltail].dir; |
| 378 | |
| 379 | len = hid_report_len(report); |
| 380 | if (dir == USB_DIR_OUT) { |
| 381 | usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0); |
| 382 | if (raw_report) { |
| 383 | memcpy(usbhid->ctrlbuf, raw_report, len); |
| 384 | kfree(objp: raw_report); |
| 385 | usbhid->ctrl[usbhid->ctrltail].raw_report = NULL; |
| 386 | } |
| 387 | } else { |
| 388 | int maxpacket; |
| 389 | |
| 390 | usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0); |
| 391 | maxpacket = usb_maxpacket(hid_to_usb_dev(hid), |
| 392 | pipe: usbhid->urbctrl->pipe); |
| 393 | len += (len == 0); /* Don't allow 0-length reports */ |
| 394 | len = round_up(len, maxpacket); |
| 395 | if (len > usbhid->bufsize) |
| 396 | len = usbhid->bufsize; |
| 397 | } |
| 398 | usbhid->urbctrl->transfer_buffer_length = len; |
| 399 | usbhid->urbctrl->dev = hid_to_usb_dev(hid); |
| 400 | |
| 401 | usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir; |
| 402 | usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : |
| 403 | HID_REQ_GET_REPORT; |
| 404 | usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | |
| 405 | report->id); |
| 406 | usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum); |
| 407 | usbhid->cr->wLength = cpu_to_le16(len); |
| 408 | |
| 409 | dbg_hid("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u\n" , |
| 410 | usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : |
| 411 | "Get_Report" , |
| 412 | usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength); |
| 413 | |
| 414 | r = usb_submit_urb(urb: usbhid->urbctrl, GFP_ATOMIC); |
| 415 | if (r < 0) { |
| 416 | hid_err(hid, "usb_submit_urb(ctrl) failed: %d\n" , r); |
| 417 | return r; |
| 418 | } |
| 419 | usbhid->last_ctrl = jiffies; |
| 420 | return 0; |
| 421 | } |
| 422 | |
| 423 | /* |
| 424 | * Output interrupt completion handler. |
| 425 | */ |
| 426 | |
| 427 | static void hid_irq_out(struct urb *urb) |
| 428 | { |
| 429 | struct hid_device *hid = urb->context; |
| 430 | struct usbhid_device *usbhid = hid->driver_data; |
| 431 | unsigned long flags; |
| 432 | int unplug = 0; |
| 433 | |
| 434 | switch (urb->status) { |
| 435 | case 0: /* success */ |
| 436 | break; |
| 437 | case -ESHUTDOWN: /* unplug */ |
| 438 | unplug = 1; |
| 439 | break; |
| 440 | case -EILSEQ: /* protocol error or unplug */ |
| 441 | case -EPROTO: /* protocol error or unplug */ |
| 442 | case -ECONNRESET: /* unlink */ |
| 443 | case -ENOENT: |
| 444 | break; |
| 445 | default: /* error */ |
| 446 | hid_warn(urb->dev, "output irq status %d received\n" , |
| 447 | urb->status); |
| 448 | } |
| 449 | |
| 450 | spin_lock_irqsave(&usbhid->lock, flags); |
| 451 | |
| 452 | if (unplug) { |
| 453 | usbhid->outtail = usbhid->outhead; |
| 454 | } else { |
| 455 | usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1); |
| 456 | |
| 457 | if (usbhid->outhead != usbhid->outtail && |
| 458 | hid_submit_out(hid) == 0) { |
| 459 | /* Successfully submitted next urb in queue */ |
| 460 | spin_unlock_irqrestore(lock: &usbhid->lock, flags); |
| 461 | return; |
| 462 | } |
| 463 | } |
| 464 | |
| 465 | clear_bit(HID_OUT_RUNNING, addr: &usbhid->iofl); |
| 466 | spin_unlock_irqrestore(lock: &usbhid->lock, flags); |
| 467 | usb_autopm_put_interface_async(intf: usbhid->intf); |
| 468 | wake_up(&usbhid->wait); |
| 469 | } |
| 470 | |
| 471 | /* |
| 472 | * Control pipe completion handler. |
| 473 | */ |
| 474 | |
| 475 | static void hid_ctrl(struct urb *urb) |
| 476 | { |
| 477 | struct hid_device *hid = urb->context; |
| 478 | struct usbhid_device *usbhid = hid->driver_data; |
| 479 | unsigned long flags; |
| 480 | int unplug = 0, status = urb->status; |
| 481 | |
| 482 | switch (status) { |
| 483 | case 0: /* success */ |
| 484 | if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN) |
| 485 | hid_input_report(hid: urb->context, |
| 486 | type: usbhid->ctrl[usbhid->ctrltail].report->type, |
| 487 | data: urb->transfer_buffer, size: urb->actual_length, interrupt: 0); |
| 488 | break; |
| 489 | case -ESHUTDOWN: /* unplug */ |
| 490 | unplug = 1; |
| 491 | break; |
| 492 | case -EILSEQ: /* protocol error or unplug */ |
| 493 | case -EPROTO: /* protocol error or unplug */ |
| 494 | case -ECONNRESET: /* unlink */ |
| 495 | case -ENOENT: |
| 496 | case -EPIPE: /* report not available */ |
| 497 | break; |
| 498 | default: /* error */ |
| 499 | hid_warn(urb->dev, "ctrl urb status %d received\n" , status); |
| 500 | } |
| 501 | |
| 502 | spin_lock_irqsave(&usbhid->lock, flags); |
| 503 | |
| 504 | if (unplug) { |
| 505 | usbhid->ctrltail = usbhid->ctrlhead; |
| 506 | } else if (usbhid->ctrlhead != usbhid->ctrltail) { |
| 507 | usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1); |
| 508 | |
| 509 | if (usbhid->ctrlhead != usbhid->ctrltail && |
| 510 | hid_submit_ctrl(hid) == 0) { |
| 511 | /* Successfully submitted next urb in queue */ |
| 512 | spin_unlock_irqrestore(lock: &usbhid->lock, flags); |
| 513 | return; |
| 514 | } |
| 515 | } |
| 516 | |
| 517 | clear_bit(HID_CTRL_RUNNING, addr: &usbhid->iofl); |
| 518 | spin_unlock_irqrestore(lock: &usbhid->lock, flags); |
| 519 | usb_autopm_put_interface_async(intf: usbhid->intf); |
| 520 | wake_up(&usbhid->wait); |
| 521 | } |
| 522 | |
| 523 | static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *report, |
| 524 | unsigned char dir) |
| 525 | { |
| 526 | int head; |
| 527 | struct usbhid_device *usbhid = hid->driver_data; |
| 528 | |
| 529 | if (((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN) || |
| 530 | test_bit(HID_DISCONNECTED, &usbhid->iofl)) |
| 531 | return; |
| 532 | |
| 533 | if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) { |
| 534 | if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) { |
| 535 | hid_warn(hid, "output queue full\n" ); |
| 536 | return; |
| 537 | } |
| 538 | |
| 539 | usbhid->out[usbhid->outhead].raw_report = hid_alloc_report_buf(report, GFP_ATOMIC); |
| 540 | if (!usbhid->out[usbhid->outhead].raw_report) { |
| 541 | hid_warn(hid, "output queueing failed\n" ); |
| 542 | return; |
| 543 | } |
| 544 | hid_output_report(report, data: usbhid->out[usbhid->outhead].raw_report); |
| 545 | usbhid->out[usbhid->outhead].report = report; |
| 546 | usbhid->outhead = head; |
| 547 | |
| 548 | /* If the queue isn't running, restart it */ |
| 549 | if (!test_bit(HID_OUT_RUNNING, &usbhid->iofl)) { |
| 550 | usbhid_restart_out_queue(usbhid); |
| 551 | |
| 552 | /* Otherwise see if an earlier request has timed out */ |
| 553 | } else if (time_after(jiffies, usbhid->last_out + HZ * 5)) { |
| 554 | |
| 555 | /* Prevent autosuspend following the unlink */ |
| 556 | usb_autopm_get_interface_no_resume(intf: usbhid->intf); |
| 557 | |
| 558 | /* |
| 559 | * Prevent resubmission in case the URB completes |
| 560 | * before we can unlink it. We don't want to cancel |
| 561 | * the wrong transfer! |
| 562 | */ |
| 563 | usb_block_urb(urb: usbhid->urbout); |
| 564 | |
| 565 | /* Drop lock to avoid deadlock if the callback runs */ |
| 566 | spin_unlock(lock: &usbhid->lock); |
| 567 | |
| 568 | usb_unlink_urb(urb: usbhid->urbout); |
| 569 | spin_lock(lock: &usbhid->lock); |
| 570 | usb_unblock_urb(urb: usbhid->urbout); |
| 571 | |
| 572 | /* Unlink might have stopped the queue */ |
| 573 | if (!test_bit(HID_OUT_RUNNING, &usbhid->iofl)) |
| 574 | usbhid_restart_out_queue(usbhid); |
| 575 | |
| 576 | /* Now we can allow autosuspend again */ |
| 577 | usb_autopm_put_interface_async(intf: usbhid->intf); |
| 578 | } |
| 579 | return; |
| 580 | } |
| 581 | |
| 582 | if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) { |
| 583 | hid_warn(hid, "control queue full\n" ); |
| 584 | return; |
| 585 | } |
| 586 | |
| 587 | if (dir == USB_DIR_OUT) { |
| 588 | usbhid->ctrl[usbhid->ctrlhead].raw_report = hid_alloc_report_buf(report, GFP_ATOMIC); |
| 589 | if (!usbhid->ctrl[usbhid->ctrlhead].raw_report) { |
| 590 | hid_warn(hid, "control queueing failed\n" ); |
| 591 | return; |
| 592 | } |
| 593 | hid_output_report(report, data: usbhid->ctrl[usbhid->ctrlhead].raw_report); |
| 594 | } |
| 595 | usbhid->ctrl[usbhid->ctrlhead].report = report; |
| 596 | usbhid->ctrl[usbhid->ctrlhead].dir = dir; |
| 597 | usbhid->ctrlhead = head; |
| 598 | |
| 599 | /* If the queue isn't running, restart it */ |
| 600 | if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) { |
| 601 | usbhid_restart_ctrl_queue(usbhid); |
| 602 | |
| 603 | /* Otherwise see if an earlier request has timed out */ |
| 604 | } else if (time_after(jiffies, usbhid->last_ctrl + HZ * 5)) { |
| 605 | |
| 606 | /* Prevent autosuspend following the unlink */ |
| 607 | usb_autopm_get_interface_no_resume(intf: usbhid->intf); |
| 608 | |
| 609 | /* |
| 610 | * Prevent resubmission in case the URB completes |
| 611 | * before we can unlink it. We don't want to cancel |
| 612 | * the wrong transfer! |
| 613 | */ |
| 614 | usb_block_urb(urb: usbhid->urbctrl); |
| 615 | |
| 616 | /* Drop lock to avoid deadlock if the callback runs */ |
| 617 | spin_unlock(lock: &usbhid->lock); |
| 618 | |
| 619 | usb_unlink_urb(urb: usbhid->urbctrl); |
| 620 | spin_lock(lock: &usbhid->lock); |
| 621 | usb_unblock_urb(urb: usbhid->urbctrl); |
| 622 | |
| 623 | /* Unlink might have stopped the queue */ |
| 624 | if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) |
| 625 | usbhid_restart_ctrl_queue(usbhid); |
| 626 | |
| 627 | /* Now we can allow autosuspend again */ |
| 628 | usb_autopm_put_interface_async(intf: usbhid->intf); |
| 629 | } |
| 630 | } |
| 631 | |
| 632 | static void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir) |
| 633 | { |
| 634 | struct usbhid_device *usbhid = hid->driver_data; |
| 635 | unsigned long flags; |
| 636 | |
| 637 | spin_lock_irqsave(&usbhid->lock, flags); |
| 638 | __usbhid_submit_report(hid, report, dir); |
| 639 | spin_unlock_irqrestore(lock: &usbhid->lock, flags); |
| 640 | } |
| 641 | |
| 642 | static int usbhid_wait_io(struct hid_device *hid) |
| 643 | { |
| 644 | struct usbhid_device *usbhid = hid->driver_data; |
| 645 | |
| 646 | if (!wait_event_timeout(usbhid->wait, |
| 647 | (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) && |
| 648 | !test_bit(HID_OUT_RUNNING, &usbhid->iofl)), |
| 649 | 10*HZ)) { |
| 650 | dbg_hid("timeout waiting for ctrl or out queue to clear\n" ); |
| 651 | return -1; |
| 652 | } |
| 653 | |
| 654 | return 0; |
| 655 | } |
| 656 | |
| 657 | static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle) |
| 658 | { |
| 659 | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
| 660 | request: HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, value: (idle << 8) | report, |
| 661 | index: ifnum, NULL, size: 0, USB_CTRL_SET_TIMEOUT); |
| 662 | } |
| 663 | |
| 664 | static int hid_get_class_descriptor(struct usb_device *dev, int ifnum, |
| 665 | unsigned char type, void *buf, int size) |
| 666 | { |
| 667 | int result, retries = 4; |
| 668 | |
| 669 | memset(buf, 0, size); |
| 670 | |
| 671 | do { |
| 672 | result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), |
| 673 | USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN, |
| 674 | value: (type << 8), index: ifnum, data: buf, size, USB_CTRL_GET_TIMEOUT); |
| 675 | retries--; |
| 676 | } while (result < size && retries); |
| 677 | return result; |
| 678 | } |
| 679 | |
| 680 | static int usbhid_open(struct hid_device *hid) |
| 681 | { |
| 682 | struct usbhid_device *usbhid = hid->driver_data; |
| 683 | int res; |
| 684 | |
| 685 | mutex_lock(&usbhid->mutex); |
| 686 | |
| 687 | set_bit(HID_OPENED, addr: &usbhid->iofl); |
| 688 | |
| 689 | if (hid->quirks & HID_QUIRK_ALWAYS_POLL) { |
| 690 | res = 0; |
| 691 | goto Done; |
| 692 | } |
| 693 | |
| 694 | res = usb_autopm_get_interface(intf: usbhid->intf); |
| 695 | /* the device must be awake to reliably request remote wakeup */ |
| 696 | if (res < 0) { |
| 697 | clear_bit(HID_OPENED, addr: &usbhid->iofl); |
| 698 | res = -EIO; |
| 699 | goto Done; |
| 700 | } |
| 701 | |
| 702 | usbhid->intf->needs_remote_wakeup = 1; |
| 703 | |
| 704 | set_bit(HID_RESUME_RUNNING, addr: &usbhid->iofl); |
| 705 | set_bit(HID_IN_POLLING, addr: &usbhid->iofl); |
| 706 | |
| 707 | res = hid_start_in(hid); |
| 708 | if (res) { |
| 709 | if (res != -ENOSPC) { |
| 710 | hid_io_error(hid); |
| 711 | res = 0; |
| 712 | } else { |
| 713 | /* no use opening if resources are insufficient */ |
| 714 | res = -EBUSY; |
| 715 | clear_bit(HID_OPENED, addr: &usbhid->iofl); |
| 716 | clear_bit(HID_IN_POLLING, addr: &usbhid->iofl); |
| 717 | usbhid->intf->needs_remote_wakeup = 0; |
| 718 | } |
| 719 | } |
| 720 | |
| 721 | usb_autopm_put_interface(intf: usbhid->intf); |
| 722 | |
| 723 | /* |
| 724 | * In case events are generated while nobody was listening, |
| 725 | * some are released when the device is re-opened. |
| 726 | * Wait 50 msec for the queue to empty before allowing events |
| 727 | * to go through hid. |
| 728 | */ |
| 729 | if (res == 0) |
| 730 | msleep(msecs: 50); |
| 731 | |
| 732 | clear_bit(HID_RESUME_RUNNING, addr: &usbhid->iofl); |
| 733 | |
| 734 | Done: |
| 735 | mutex_unlock(lock: &usbhid->mutex); |
| 736 | return res; |
| 737 | } |
| 738 | |
| 739 | static void usbhid_close(struct hid_device *hid) |
| 740 | { |
| 741 | struct usbhid_device *usbhid = hid->driver_data; |
| 742 | |
| 743 | mutex_lock(&usbhid->mutex); |
| 744 | |
| 745 | /* |
| 746 | * Make sure we don't restart data acquisition due to |
| 747 | * a resumption we no longer care about by avoiding racing |
| 748 | * with hid_start_in(). |
| 749 | */ |
| 750 | spin_lock_irq(lock: &usbhid->lock); |
| 751 | clear_bit(HID_OPENED, addr: &usbhid->iofl); |
| 752 | if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) |
| 753 | clear_bit(HID_IN_POLLING, addr: &usbhid->iofl); |
| 754 | spin_unlock_irq(lock: &usbhid->lock); |
| 755 | |
| 756 | if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) { |
| 757 | hid_cancel_delayed_stuff(usbhid); |
| 758 | usb_kill_urb(urb: usbhid->urbin); |
| 759 | usbhid->intf->needs_remote_wakeup = 0; |
| 760 | } |
| 761 | |
| 762 | mutex_unlock(lock: &usbhid->mutex); |
| 763 | } |
| 764 | |
| 765 | /* |
| 766 | * Initialize all reports |
| 767 | */ |
| 768 | |
| 769 | void usbhid_init_reports(struct hid_device *hid) |
| 770 | { |
| 771 | struct hid_report *report; |
| 772 | struct usbhid_device *usbhid = hid->driver_data; |
| 773 | struct hid_report_enum *report_enum; |
| 774 | int err, ret; |
| 775 | |
| 776 | report_enum = &hid->report_enum[HID_INPUT_REPORT]; |
| 777 | list_for_each_entry(report, &report_enum->report_list, list) |
| 778 | usbhid_submit_report(hid, report, USB_DIR_IN); |
| 779 | |
| 780 | report_enum = &hid->report_enum[HID_FEATURE_REPORT]; |
| 781 | list_for_each_entry(report, &report_enum->report_list, list) |
| 782 | usbhid_submit_report(hid, report, USB_DIR_IN); |
| 783 | |
| 784 | err = 0; |
| 785 | ret = usbhid_wait_io(hid); |
| 786 | while (ret) { |
| 787 | err |= ret; |
| 788 | if (test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) |
| 789 | usb_kill_urb(urb: usbhid->urbctrl); |
| 790 | if (test_bit(HID_OUT_RUNNING, &usbhid->iofl)) |
| 791 | usb_kill_urb(urb: usbhid->urbout); |
| 792 | ret = usbhid_wait_io(hid); |
| 793 | } |
| 794 | |
| 795 | if (err) |
| 796 | hid_warn(hid, "timeout initializing reports\n" ); |
| 797 | } |
| 798 | |
| 799 | /* |
| 800 | * Reset LEDs which BIOS might have left on. For now, just NumLock (0x01). |
| 801 | */ |
| 802 | static int hid_find_field_early(struct hid_device *hid, unsigned int page, |
| 803 | unsigned int hid_code, struct hid_field **pfield) |
| 804 | { |
| 805 | struct hid_report *report; |
| 806 | struct hid_field *field; |
| 807 | struct hid_usage *usage; |
| 808 | int i, j; |
| 809 | |
| 810 | list_for_each_entry(report, &hid->report_enum[HID_OUTPUT_REPORT].report_list, list) { |
| 811 | for (i = 0; i < report->maxfield; i++) { |
| 812 | field = report->field[i]; |
| 813 | for (j = 0; j < field->maxusage; j++) { |
| 814 | usage = &field->usage[j]; |
| 815 | if ((usage->hid & HID_USAGE_PAGE) == page && |
| 816 | (usage->hid & 0xFFFF) == hid_code) { |
| 817 | *pfield = field; |
| 818 | return j; |
| 819 | } |
| 820 | } |
| 821 | } |
| 822 | } |
| 823 | return -1; |
| 824 | } |
| 825 | |
| 826 | static void usbhid_set_leds(struct hid_device *hid) |
| 827 | { |
| 828 | struct hid_field *field; |
| 829 | int offset; |
| 830 | |
| 831 | if ((offset = hid_find_field_early(hid, HID_UP_LED, hid_code: 0x01, pfield: &field)) != -1) { |
| 832 | hid_set_field(field, offset, 0); |
| 833 | usbhid_submit_report(hid, report: field->report, USB_DIR_OUT); |
| 834 | } |
| 835 | } |
| 836 | |
| 837 | /* |
| 838 | * Traverse the supplied list of reports and find the longest |
| 839 | */ |
| 840 | static void hid_find_max_report(struct hid_device *hid, unsigned int type, |
| 841 | unsigned int *max) |
| 842 | { |
| 843 | struct hid_report *report; |
| 844 | unsigned int size; |
| 845 | |
| 846 | list_for_each_entry(report, &hid->report_enum[type].report_list, list) { |
| 847 | size = ((report->size - 1) >> 3) + 1 + hid->report_enum[type].numbered; |
| 848 | if (*max < size) |
| 849 | *max = size; |
| 850 | } |
| 851 | } |
| 852 | |
| 853 | static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid) |
| 854 | { |
| 855 | struct usbhid_device *usbhid = hid->driver_data; |
| 856 | |
| 857 | usbhid->inbuf = usb_alloc_coherent(dev, size: usbhid->bufsize, GFP_KERNEL, |
| 858 | dma: &usbhid->inbuf_dma); |
| 859 | usbhid->outbuf = usb_alloc_coherent(dev, size: usbhid->bufsize, GFP_KERNEL, |
| 860 | dma: &usbhid->outbuf_dma); |
| 861 | usbhid->cr = kmalloc(sizeof(*usbhid->cr), GFP_KERNEL); |
| 862 | usbhid->ctrlbuf = usb_alloc_coherent(dev, size: usbhid->bufsize, GFP_KERNEL, |
| 863 | dma: &usbhid->ctrlbuf_dma); |
| 864 | if (!usbhid->inbuf || !usbhid->outbuf || !usbhid->cr || |
| 865 | !usbhid->ctrlbuf) |
| 866 | return -1; |
| 867 | |
| 868 | return 0; |
| 869 | } |
| 870 | |
| 871 | static int usbhid_get_raw_report(struct hid_device *hid, |
| 872 | unsigned char report_number, __u8 *buf, size_t count, |
| 873 | unsigned char report_type) |
| 874 | { |
| 875 | struct usbhid_device *usbhid = hid->driver_data; |
| 876 | struct usb_device *dev = hid_to_usb_dev(hid); |
| 877 | struct usb_interface *intf = usbhid->intf; |
| 878 | struct usb_host_interface *interface = intf->cur_altsetting; |
| 879 | int skipped_report_id = 0; |
| 880 | int ret; |
| 881 | |
| 882 | /* Byte 0 is the report number. Report data starts at byte 1.*/ |
| 883 | buf[0] = report_number; |
| 884 | if (report_number == 0x0) { |
| 885 | /* Offset the return buffer by 1, so that the report ID |
| 886 | will remain in byte 0. */ |
| 887 | buf++; |
| 888 | count--; |
| 889 | skipped_report_id = 1; |
| 890 | } |
| 891 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), |
| 892 | request: HID_REQ_GET_REPORT, |
| 893 | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 894 | value: ((report_type + 1) << 8) | report_number, |
| 895 | index: interface->desc.bInterfaceNumber, data: buf, size: count, |
| 896 | USB_CTRL_SET_TIMEOUT); |
| 897 | |
| 898 | /* count also the report id */ |
| 899 | if (ret > 0 && skipped_report_id) |
| 900 | ret++; |
| 901 | |
| 902 | return ret; |
| 903 | } |
| 904 | |
| 905 | static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum, |
| 906 | __u8 *buf, size_t count, unsigned char rtype) |
| 907 | { |
| 908 | struct usbhid_device *usbhid = hid->driver_data; |
| 909 | struct usb_device *dev = hid_to_usb_dev(hid); |
| 910 | struct usb_interface *intf = usbhid->intf; |
| 911 | struct usb_host_interface *interface = intf->cur_altsetting; |
| 912 | int ret, skipped_report_id = 0; |
| 913 | |
| 914 | /* Byte 0 is the report number. Report data starts at byte 1.*/ |
| 915 | if ((rtype == HID_OUTPUT_REPORT) && |
| 916 | (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID)) |
| 917 | buf[0] = 0; |
| 918 | else |
| 919 | buf[0] = reportnum; |
| 920 | |
| 921 | if (buf[0] == 0x0) { |
| 922 | /* Don't send the Report ID */ |
| 923 | buf++; |
| 924 | count--; |
| 925 | skipped_report_id = 1; |
| 926 | } |
| 927 | |
| 928 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
| 929 | request: HID_REQ_SET_REPORT, |
| 930 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 931 | value: ((rtype + 1) << 8) | reportnum, |
| 932 | index: interface->desc.bInterfaceNumber, data: buf, size: count, |
| 933 | USB_CTRL_SET_TIMEOUT); |
| 934 | /* count also the report id, if this was a numbered report. */ |
| 935 | if (ret > 0 && skipped_report_id) |
| 936 | ret++; |
| 937 | |
| 938 | return ret; |
| 939 | } |
| 940 | |
| 941 | static int usbhid_output_report(struct hid_device *hid, __u8 *buf, size_t count) |
| 942 | { |
| 943 | struct usbhid_device *usbhid = hid->driver_data; |
| 944 | struct usb_device *dev = hid_to_usb_dev(hid); |
| 945 | int actual_length, skipped_report_id = 0, ret; |
| 946 | |
| 947 | if (!usbhid->urbout) |
| 948 | return -ENOSYS; |
| 949 | |
| 950 | if (buf[0] == 0x0) { |
| 951 | /* Don't send the Report ID */ |
| 952 | buf++; |
| 953 | count--; |
| 954 | skipped_report_id = 1; |
| 955 | } |
| 956 | |
| 957 | ret = usb_interrupt_msg(usb_dev: dev, pipe: usbhid->urbout->pipe, |
| 958 | data: buf, len: count, actual_length: &actual_length, |
| 959 | USB_CTRL_SET_TIMEOUT); |
| 960 | /* return the number of bytes transferred */ |
| 961 | if (ret == 0) { |
| 962 | ret = actual_length; |
| 963 | /* count also the report id */ |
| 964 | if (skipped_report_id) |
| 965 | ret++; |
| 966 | } |
| 967 | |
| 968 | return ret; |
| 969 | } |
| 970 | |
| 971 | static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid) |
| 972 | { |
| 973 | struct usbhid_device *usbhid = hid->driver_data; |
| 974 | |
| 975 | usb_free_coherent(dev, size: usbhid->bufsize, addr: usbhid->inbuf, dma: usbhid->inbuf_dma); |
| 976 | usb_free_coherent(dev, size: usbhid->bufsize, addr: usbhid->outbuf, dma: usbhid->outbuf_dma); |
| 977 | kfree(objp: usbhid->cr); |
| 978 | usb_free_coherent(dev, size: usbhid->bufsize, addr: usbhid->ctrlbuf, dma: usbhid->ctrlbuf_dma); |
| 979 | } |
| 980 | |
| 981 | static int usbhid_parse(struct hid_device *hid) |
| 982 | { |
| 983 | struct usb_interface *intf = to_usb_interface(hid->dev.parent); |
| 984 | struct usb_host_interface *interface = intf->cur_altsetting; |
| 985 | struct usb_device *dev = interface_to_usbdev (intf); |
| 986 | struct hid_descriptor *hdesc; |
| 987 | struct hid_class_descriptor *hcdesc; |
| 988 | __u8 fixed_opt_descriptors_size; |
| 989 | u32 quirks = 0; |
| 990 | unsigned int rsize = 0; |
| 991 | char *rdesc; |
| 992 | int ret; |
| 993 | |
| 994 | quirks = hid_lookup_quirk(hdev: hid); |
| 995 | |
| 996 | if (quirks & HID_QUIRK_IGNORE) |
| 997 | return -ENODEV; |
| 998 | |
| 999 | /* Many keyboards and mice don't like to be polled for reports, |
| 1000 | * so we will always set the HID_QUIRK_NOGET flag for them. */ |
| 1001 | if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT) { |
| 1002 | if (interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD || |
| 1003 | interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) |
| 1004 | quirks |= HID_QUIRK_NOGET; |
| 1005 | } |
| 1006 | |
| 1007 | if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && |
| 1008 | (!interface->desc.bNumEndpoints || |
| 1009 | usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) { |
| 1010 | dbg_hid("class descriptor not present\n" ); |
| 1011 | return -ENODEV; |
| 1012 | } |
| 1013 | |
| 1014 | if (!hdesc->bNumDescriptors || |
| 1015 | hdesc->bLength != sizeof(*hdesc) + |
| 1016 | (hdesc->bNumDescriptors - 1) * sizeof(*hcdesc)) { |
| 1017 | dbg_hid("hid descriptor invalid, bLen=%hhu bNum=%hhu\n" , |
| 1018 | hdesc->bLength, hdesc->bNumDescriptors); |
| 1019 | |
| 1020 | /* |
| 1021 | * Some devices may expose a wrong number of descriptors compared |
| 1022 | * to the provided length. |
| 1023 | * However, we ignore the optional hid class descriptors entirely |
| 1024 | * so we can safely recompute the proper field. |
| 1025 | */ |
| 1026 | if (hdesc->bLength >= sizeof(*hdesc)) { |
| 1027 | fixed_opt_descriptors_size = hdesc->bLength - sizeof(*hdesc); |
| 1028 | |
| 1029 | hid_warn(intf, "fixing wrong optional hid class descriptors count\n" ); |
| 1030 | hdesc->bNumDescriptors = fixed_opt_descriptors_size / sizeof(*hcdesc) + 1; |
| 1031 | } else { |
| 1032 | return -EINVAL; |
| 1033 | } |
| 1034 | } |
| 1035 | |
| 1036 | hid->version = le16_to_cpu(hdesc->bcdHID); |
| 1037 | hid->country = hdesc->bCountryCode; |
| 1038 | |
| 1039 | if (hdesc->rpt_desc.bDescriptorType == HID_DT_REPORT) |
| 1040 | rsize = le16_to_cpu(hdesc->rpt_desc.wDescriptorLength); |
| 1041 | |
| 1042 | if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) { |
| 1043 | dbg_hid("weird size of report descriptor (%u)\n" , rsize); |
| 1044 | return -EINVAL; |
| 1045 | } |
| 1046 | |
| 1047 | rdesc = kmalloc(rsize, GFP_KERNEL); |
| 1048 | if (!rdesc) |
| 1049 | return -ENOMEM; |
| 1050 | |
| 1051 | hid_set_idle(dev, ifnum: interface->desc.bInterfaceNumber, report: 0, idle: 0); |
| 1052 | |
| 1053 | ret = hid_get_class_descriptor(dev, ifnum: interface->desc.bInterfaceNumber, |
| 1054 | HID_DT_REPORT, buf: rdesc, size: rsize); |
| 1055 | if (ret < 0) { |
| 1056 | dbg_hid("reading report descriptor failed\n" ); |
| 1057 | kfree(objp: rdesc); |
| 1058 | goto err; |
| 1059 | } |
| 1060 | |
| 1061 | ret = hid_parse_report(hid, start: rdesc, size: rsize); |
| 1062 | kfree(objp: rdesc); |
| 1063 | if (ret) { |
| 1064 | dbg_hid("parsing report descriptor failed\n" ); |
| 1065 | goto err; |
| 1066 | } |
| 1067 | |
| 1068 | if (hdesc->bNumDescriptors > 1) |
| 1069 | hid_warn(intf, |
| 1070 | "%u unsupported optional hid class descriptors\n" , |
| 1071 | (int)(hdesc->bNumDescriptors - 1)); |
| 1072 | |
| 1073 | hid->quirks |= quirks; |
| 1074 | |
| 1075 | return 0; |
| 1076 | err: |
| 1077 | return ret; |
| 1078 | } |
| 1079 | |
| 1080 | static int usbhid_start(struct hid_device *hid) |
| 1081 | { |
| 1082 | struct usb_interface *intf = to_usb_interface(hid->dev.parent); |
| 1083 | struct usb_host_interface *interface = intf->cur_altsetting; |
| 1084 | struct usb_device *dev = interface_to_usbdev(intf); |
| 1085 | struct usbhid_device *usbhid = hid->driver_data; |
| 1086 | unsigned int n, insize = 0; |
| 1087 | int ret; |
| 1088 | |
| 1089 | mutex_lock(&usbhid->mutex); |
| 1090 | |
| 1091 | clear_bit(HID_DISCONNECTED, addr: &usbhid->iofl); |
| 1092 | |
| 1093 | usbhid->bufsize = HID_MIN_BUFFER_SIZE; |
| 1094 | hid_find_max_report(hid, type: HID_INPUT_REPORT, max: &usbhid->bufsize); |
| 1095 | hid_find_max_report(hid, type: HID_OUTPUT_REPORT, max: &usbhid->bufsize); |
| 1096 | hid_find_max_report(hid, type: HID_FEATURE_REPORT, max: &usbhid->bufsize); |
| 1097 | |
| 1098 | if (usbhid->bufsize > HID_MAX_BUFFER_SIZE) |
| 1099 | usbhid->bufsize = HID_MAX_BUFFER_SIZE; |
| 1100 | |
| 1101 | hid_find_max_report(hid, type: HID_INPUT_REPORT, max: &insize); |
| 1102 | |
| 1103 | if (insize > HID_MAX_BUFFER_SIZE) |
| 1104 | insize = HID_MAX_BUFFER_SIZE; |
| 1105 | |
| 1106 | if (hid_alloc_buffers(dev, hid)) { |
| 1107 | ret = -ENOMEM; |
| 1108 | goto fail; |
| 1109 | } |
| 1110 | |
| 1111 | for (n = 0; n < interface->desc.bNumEndpoints; n++) { |
| 1112 | struct usb_endpoint_descriptor *endpoint; |
| 1113 | int pipe; |
| 1114 | int interval; |
| 1115 | |
| 1116 | endpoint = &interface->endpoint[n].desc; |
| 1117 | if (!usb_endpoint_xfer_int(epd: endpoint)) |
| 1118 | continue; |
| 1119 | |
| 1120 | interval = endpoint->bInterval; |
| 1121 | |
| 1122 | /* Some vendors give fullspeed interval on highspeed devices */ |
| 1123 | if (hid->quirks & HID_QUIRK_FULLSPEED_INTERVAL && |
| 1124 | dev->speed == USB_SPEED_HIGH) { |
| 1125 | interval = fls(x: endpoint->bInterval*8); |
| 1126 | pr_info("%s: Fixing fullspeed to highspeed interval: %d -> %d\n" , |
| 1127 | hid->name, endpoint->bInterval, interval); |
| 1128 | } |
| 1129 | |
| 1130 | /* Change the polling interval of mice, joysticks |
| 1131 | * and keyboards. |
| 1132 | */ |
| 1133 | switch (hid->collection->usage) { |
| 1134 | case HID_GD_MOUSE: |
| 1135 | if (hid_mousepoll_interval > 0) |
| 1136 | interval = hid_mousepoll_interval; |
| 1137 | break; |
| 1138 | case HID_GD_JOYSTICK: |
| 1139 | if (hid_jspoll_interval > 0) |
| 1140 | interval = hid_jspoll_interval; |
| 1141 | break; |
| 1142 | case HID_GD_KEYBOARD: |
| 1143 | if (hid_kbpoll_interval > 0) |
| 1144 | interval = hid_kbpoll_interval; |
| 1145 | break; |
| 1146 | } |
| 1147 | |
| 1148 | ret = -ENOMEM; |
| 1149 | if (usb_endpoint_dir_in(epd: endpoint)) { |
| 1150 | if (usbhid->urbin) |
| 1151 | continue; |
| 1152 | if (!(usbhid->urbin = usb_alloc_urb(iso_packets: 0, GFP_KERNEL))) |
| 1153 | goto fail; |
| 1154 | pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); |
| 1155 | usb_fill_int_urb(urb: usbhid->urbin, dev, pipe, transfer_buffer: usbhid->inbuf, buffer_length: insize, |
| 1156 | complete_fn: hid_irq_in, context: hid, interval); |
| 1157 | usbhid->urbin->transfer_dma = usbhid->inbuf_dma; |
| 1158 | usbhid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 1159 | } else { |
| 1160 | if (usbhid->urbout) |
| 1161 | continue; |
| 1162 | if (!(usbhid->urbout = usb_alloc_urb(iso_packets: 0, GFP_KERNEL))) |
| 1163 | goto fail; |
| 1164 | pipe = usb_sndintpipe(dev, endpoint->bEndpointAddress); |
| 1165 | usb_fill_int_urb(urb: usbhid->urbout, dev, pipe, transfer_buffer: usbhid->outbuf, buffer_length: 0, |
| 1166 | complete_fn: hid_irq_out, context: hid, interval); |
| 1167 | usbhid->urbout->transfer_dma = usbhid->outbuf_dma; |
| 1168 | usbhid->urbout->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 1169 | } |
| 1170 | } |
| 1171 | |
| 1172 | usbhid->urbctrl = usb_alloc_urb(iso_packets: 0, GFP_KERNEL); |
| 1173 | if (!usbhid->urbctrl) { |
| 1174 | ret = -ENOMEM; |
| 1175 | goto fail; |
| 1176 | } |
| 1177 | |
| 1178 | usb_fill_control_urb(urb: usbhid->urbctrl, dev, pipe: 0, setup_packet: (void *) usbhid->cr, |
| 1179 | transfer_buffer: usbhid->ctrlbuf, buffer_length: 1, complete_fn: hid_ctrl, context: hid); |
| 1180 | usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma; |
| 1181 | usbhid->urbctrl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 1182 | |
| 1183 | set_bit(HID_STARTED, addr: &usbhid->iofl); |
| 1184 | |
| 1185 | if (hid->quirks & HID_QUIRK_ALWAYS_POLL) { |
| 1186 | ret = usb_autopm_get_interface(intf: usbhid->intf); |
| 1187 | if (ret) |
| 1188 | goto fail; |
| 1189 | set_bit(HID_IN_POLLING, addr: &usbhid->iofl); |
| 1190 | usbhid->intf->needs_remote_wakeup = 1; |
| 1191 | ret = hid_start_in(hid); |
| 1192 | if (ret) { |
| 1193 | dev_err(&hid->dev, |
| 1194 | "failed to start in urb: %d\n" , ret); |
| 1195 | } |
| 1196 | usb_autopm_put_interface(intf: usbhid->intf); |
| 1197 | } |
| 1198 | |
| 1199 | /* Some keyboards don't work until their LEDs have been set. |
| 1200 | * Since BIOSes do set the LEDs, it must be safe for any device |
| 1201 | * that supports the keyboard boot protocol. |
| 1202 | * In addition, enable remote wakeup by default for all keyboard |
| 1203 | * devices supporting the boot protocol. |
| 1204 | */ |
| 1205 | if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT && |
| 1206 | interface->desc.bInterfaceProtocol == |
| 1207 | USB_INTERFACE_PROTOCOL_KEYBOARD) { |
| 1208 | usbhid_set_leds(hid); |
| 1209 | device_set_wakeup_enable(dev: &dev->dev, enable: 1); |
| 1210 | } |
| 1211 | |
| 1212 | mutex_unlock(lock: &usbhid->mutex); |
| 1213 | return 0; |
| 1214 | |
| 1215 | fail: |
| 1216 | usb_free_urb(urb: usbhid->urbin); |
| 1217 | usb_free_urb(urb: usbhid->urbout); |
| 1218 | usb_free_urb(urb: usbhid->urbctrl); |
| 1219 | usbhid->urbin = NULL; |
| 1220 | usbhid->urbout = NULL; |
| 1221 | usbhid->urbctrl = NULL; |
| 1222 | hid_free_buffers(dev, hid); |
| 1223 | mutex_unlock(lock: &usbhid->mutex); |
| 1224 | return ret; |
| 1225 | } |
| 1226 | |
| 1227 | static void usbhid_stop(struct hid_device *hid) |
| 1228 | { |
| 1229 | struct usbhid_device *usbhid = hid->driver_data; |
| 1230 | |
| 1231 | if (WARN_ON(!usbhid)) |
| 1232 | return; |
| 1233 | |
| 1234 | if (hid->quirks & HID_QUIRK_ALWAYS_POLL) { |
| 1235 | clear_bit(HID_IN_POLLING, addr: &usbhid->iofl); |
| 1236 | usbhid->intf->needs_remote_wakeup = 0; |
| 1237 | } |
| 1238 | |
| 1239 | mutex_lock(&usbhid->mutex); |
| 1240 | |
| 1241 | clear_bit(HID_STARTED, addr: &usbhid->iofl); |
| 1242 | |
| 1243 | spin_lock_irq(lock: &usbhid->lock); /* Sync with error and led handlers */ |
| 1244 | set_bit(HID_DISCONNECTED, addr: &usbhid->iofl); |
| 1245 | while (usbhid->ctrltail != usbhid->ctrlhead) { |
| 1246 | if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_OUT) { |
| 1247 | kfree(objp: usbhid->ctrl[usbhid->ctrltail].raw_report); |
| 1248 | usbhid->ctrl[usbhid->ctrltail].raw_report = NULL; |
| 1249 | } |
| 1250 | |
| 1251 | usbhid->ctrltail = (usbhid->ctrltail + 1) & |
| 1252 | (HID_CONTROL_FIFO_SIZE - 1); |
| 1253 | } |
| 1254 | spin_unlock_irq(lock: &usbhid->lock); |
| 1255 | |
| 1256 | usb_kill_urb(urb: usbhid->urbin); |
| 1257 | usb_kill_urb(urb: usbhid->urbout); |
| 1258 | usb_kill_urb(urb: usbhid->urbctrl); |
| 1259 | |
| 1260 | hid_cancel_delayed_stuff(usbhid); |
| 1261 | |
| 1262 | hid->claimed = 0; |
| 1263 | |
| 1264 | usb_free_urb(urb: usbhid->urbin); |
| 1265 | usb_free_urb(urb: usbhid->urbctrl); |
| 1266 | usb_free_urb(urb: usbhid->urbout); |
| 1267 | usbhid->urbin = NULL; /* don't mess up next start */ |
| 1268 | usbhid->urbctrl = NULL; |
| 1269 | usbhid->urbout = NULL; |
| 1270 | |
| 1271 | hid_free_buffers(hid_to_usb_dev(hid), hid); |
| 1272 | |
| 1273 | mutex_unlock(lock: &usbhid->mutex); |
| 1274 | } |
| 1275 | |
| 1276 | static int usbhid_power(struct hid_device *hid, int lvl) |
| 1277 | { |
| 1278 | struct usbhid_device *usbhid = hid->driver_data; |
| 1279 | int r = 0; |
| 1280 | |
| 1281 | switch (lvl) { |
| 1282 | case PM_HINT_FULLON: |
| 1283 | r = usb_autopm_get_interface(intf: usbhid->intf); |
| 1284 | break; |
| 1285 | |
| 1286 | case PM_HINT_NORMAL: |
| 1287 | usb_autopm_put_interface(intf: usbhid->intf); |
| 1288 | break; |
| 1289 | } |
| 1290 | |
| 1291 | return r; |
| 1292 | } |
| 1293 | |
| 1294 | static void usbhid_request(struct hid_device *hid, struct hid_report *rep, int reqtype) |
| 1295 | { |
| 1296 | switch (reqtype) { |
| 1297 | case HID_REQ_GET_REPORT: |
| 1298 | usbhid_submit_report(hid, report: rep, USB_DIR_IN); |
| 1299 | break; |
| 1300 | case HID_REQ_SET_REPORT: |
| 1301 | usbhid_submit_report(hid, report: rep, USB_DIR_OUT); |
| 1302 | break; |
| 1303 | } |
| 1304 | } |
| 1305 | |
| 1306 | static int usbhid_raw_request(struct hid_device *hid, unsigned char reportnum, |
| 1307 | __u8 *buf, size_t len, unsigned char rtype, |
| 1308 | int reqtype) |
| 1309 | { |
| 1310 | switch (reqtype) { |
| 1311 | case HID_REQ_GET_REPORT: |
| 1312 | return usbhid_get_raw_report(hid, report_number: reportnum, buf, count: len, report_type: rtype); |
| 1313 | case HID_REQ_SET_REPORT: |
| 1314 | return usbhid_set_raw_report(hid, reportnum, buf, count: len, rtype); |
| 1315 | default: |
| 1316 | return -EIO; |
| 1317 | } |
| 1318 | } |
| 1319 | |
| 1320 | static int usbhid_idle(struct hid_device *hid, int report, int idle, |
| 1321 | int reqtype) |
| 1322 | { |
| 1323 | struct usb_device *dev = hid_to_usb_dev(hid); |
| 1324 | struct usb_interface *intf = to_usb_interface(hid->dev.parent); |
| 1325 | struct usb_host_interface *interface = intf->cur_altsetting; |
| 1326 | int ifnum = interface->desc.bInterfaceNumber; |
| 1327 | |
| 1328 | if (reqtype != HID_REQ_SET_IDLE) |
| 1329 | return -EINVAL; |
| 1330 | |
| 1331 | return hid_set_idle(dev, ifnum, report, idle); |
| 1332 | } |
| 1333 | |
| 1334 | static bool usbhid_may_wakeup(struct hid_device *hid) |
| 1335 | { |
| 1336 | struct usb_device *dev = hid_to_usb_dev(hid); |
| 1337 | |
| 1338 | return device_may_wakeup(dev: &dev->dev); |
| 1339 | } |
| 1340 | |
| 1341 | static const struct hid_ll_driver usb_hid_driver = { |
| 1342 | .parse = usbhid_parse, |
| 1343 | .start = usbhid_start, |
| 1344 | .stop = usbhid_stop, |
| 1345 | .open = usbhid_open, |
| 1346 | .close = usbhid_close, |
| 1347 | .power = usbhid_power, |
| 1348 | .request = usbhid_request, |
| 1349 | .wait = usbhid_wait_io, |
| 1350 | .raw_request = usbhid_raw_request, |
| 1351 | .output_report = usbhid_output_report, |
| 1352 | .idle = usbhid_idle, |
| 1353 | .may_wakeup = usbhid_may_wakeup, |
| 1354 | }; |
| 1355 | |
| 1356 | bool hid_is_usb(const struct hid_device *hdev) |
| 1357 | { |
| 1358 | return hdev->ll_driver == &usb_hid_driver; |
| 1359 | } |
| 1360 | EXPORT_SYMBOL_GPL(hid_is_usb); |
| 1361 | |
| 1362 | static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| 1363 | { |
| 1364 | struct usb_host_interface *interface = intf->cur_altsetting; |
| 1365 | struct usb_device *dev = interface_to_usbdev(intf); |
| 1366 | struct usbhid_device *usbhid; |
| 1367 | struct hid_device *hid; |
| 1368 | unsigned int n, has_in = 0; |
| 1369 | size_t len; |
| 1370 | int ret; |
| 1371 | |
| 1372 | dbg_hid("HID probe called for ifnum %d\n" , |
| 1373 | intf->altsetting->desc.bInterfaceNumber); |
| 1374 | |
| 1375 | for (n = 0; n < interface->desc.bNumEndpoints; n++) |
| 1376 | if (usb_endpoint_is_int_in(epd: &interface->endpoint[n].desc)) |
| 1377 | has_in++; |
| 1378 | if (!has_in) { |
| 1379 | hid_err(intf, "couldn't find an input interrupt endpoint\n" ); |
| 1380 | return -ENODEV; |
| 1381 | } |
| 1382 | |
| 1383 | hid = hid_allocate_device(); |
| 1384 | if (IS_ERR(ptr: hid)) |
| 1385 | return PTR_ERR(ptr: hid); |
| 1386 | |
| 1387 | usb_set_intfdata(intf, data: hid); |
| 1388 | hid->ll_driver = &usb_hid_driver; |
| 1389 | hid->ff_init = hid_pidff_init; |
| 1390 | #ifdef CONFIG_USB_HIDDEV |
| 1391 | hid->hiddev_connect = hiddev_connect; |
| 1392 | hid->hiddev_disconnect = hiddev_disconnect; |
| 1393 | hid->hiddev_hid_event = hiddev_hid_event; |
| 1394 | hid->hiddev_report_event = hiddev_report_event; |
| 1395 | #endif |
| 1396 | hid->dev.parent = &intf->dev; |
| 1397 | device_set_node(dev: &hid->dev, dev_fwnode(&intf->dev)); |
| 1398 | hid->bus = BUS_USB; |
| 1399 | hid->vendor = le16_to_cpu(dev->descriptor.idVendor); |
| 1400 | hid->product = le16_to_cpu(dev->descriptor.idProduct); |
| 1401 | hid->version = le16_to_cpu(dev->descriptor.bcdDevice); |
| 1402 | hid->name[0] = 0; |
| 1403 | if (intf->cur_altsetting->desc.bInterfaceProtocol == |
| 1404 | USB_INTERFACE_PROTOCOL_MOUSE) |
| 1405 | hid->type = HID_TYPE_USBMOUSE; |
| 1406 | else if (intf->cur_altsetting->desc.bInterfaceProtocol == 0) |
| 1407 | hid->type = HID_TYPE_USBNONE; |
| 1408 | |
| 1409 | if (dev->manufacturer) |
| 1410 | strscpy(hid->name, dev->manufacturer, sizeof(hid->name)); |
| 1411 | |
| 1412 | if (dev->product) { |
| 1413 | if (dev->manufacturer) |
| 1414 | strlcat(p: hid->name, q: " " , avail: sizeof(hid->name)); |
| 1415 | strlcat(p: hid->name, q: dev->product, avail: sizeof(hid->name)); |
| 1416 | } |
| 1417 | |
| 1418 | if (!strlen(hid->name)) |
| 1419 | snprintf(buf: hid->name, size: sizeof(hid->name), fmt: "HID %04x:%04x" , |
| 1420 | le16_to_cpu(dev->descriptor.idVendor), |
| 1421 | le16_to_cpu(dev->descriptor.idProduct)); |
| 1422 | |
| 1423 | usb_make_path(dev, buf: hid->phys, size: sizeof(hid->phys)); |
| 1424 | strlcat(p: hid->phys, q: "/input" , avail: sizeof(hid->phys)); |
| 1425 | len = strlen(hid->phys); |
| 1426 | if (len < sizeof(hid->phys) - 1) |
| 1427 | snprintf(buf: hid->phys + len, size: sizeof(hid->phys) - len, |
| 1428 | fmt: "%d" , intf->altsetting[0].desc.bInterfaceNumber); |
| 1429 | |
| 1430 | if (usb_string(dev, index: dev->descriptor.iSerialNumber, buf: hid->uniq, size: 64) <= 0) |
| 1431 | hid->uniq[0] = 0; |
| 1432 | |
| 1433 | usbhid = kzalloc(sizeof(*usbhid), GFP_KERNEL); |
| 1434 | if (usbhid == NULL) { |
| 1435 | ret = -ENOMEM; |
| 1436 | goto err; |
| 1437 | } |
| 1438 | |
| 1439 | hid->driver_data = usbhid; |
| 1440 | usbhid->hid = hid; |
| 1441 | usbhid->intf = intf; |
| 1442 | usbhid->ifnum = interface->desc.bInterfaceNumber; |
| 1443 | |
| 1444 | init_waitqueue_head(&usbhid->wait); |
| 1445 | INIT_WORK(&usbhid->reset_work, hid_reset); |
| 1446 | timer_setup(&usbhid->io_retry, hid_retry_timeout, 0); |
| 1447 | spin_lock_init(&usbhid->lock); |
| 1448 | mutex_init(&usbhid->mutex); |
| 1449 | |
| 1450 | ret = hid_add_device(hid); |
| 1451 | if (ret) { |
| 1452 | if (ret != -ENODEV) |
| 1453 | hid_err(intf, "can't add hid device: %d\n" , ret); |
| 1454 | goto err_free; |
| 1455 | } |
| 1456 | |
| 1457 | return 0; |
| 1458 | err_free: |
| 1459 | kfree(objp: usbhid); |
| 1460 | err: |
| 1461 | hid_destroy_device(hid); |
| 1462 | return ret; |
| 1463 | } |
| 1464 | |
| 1465 | static void usbhid_disconnect(struct usb_interface *intf) |
| 1466 | { |
| 1467 | struct hid_device *hid = usb_get_intfdata(intf); |
| 1468 | struct usbhid_device *usbhid; |
| 1469 | |
| 1470 | if (WARN_ON(!hid)) |
| 1471 | return; |
| 1472 | |
| 1473 | usbhid = hid->driver_data; |
| 1474 | spin_lock_irq(lock: &usbhid->lock); /* Sync with error and led handlers */ |
| 1475 | set_bit(HID_DISCONNECTED, addr: &usbhid->iofl); |
| 1476 | spin_unlock_irq(lock: &usbhid->lock); |
| 1477 | hid_destroy_device(hid); |
| 1478 | kfree(objp: usbhid); |
| 1479 | } |
| 1480 | |
| 1481 | static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid) |
| 1482 | { |
| 1483 | timer_delete_sync(timer: &usbhid->io_retry); |
| 1484 | cancel_work_sync(work: &usbhid->reset_work); |
| 1485 | } |
| 1486 | |
| 1487 | static void hid_cease_io(struct usbhid_device *usbhid) |
| 1488 | { |
| 1489 | timer_delete_sync(timer: &usbhid->io_retry); |
| 1490 | usb_kill_urb(urb: usbhid->urbin); |
| 1491 | usb_kill_urb(urb: usbhid->urbctrl); |
| 1492 | usb_kill_urb(urb: usbhid->urbout); |
| 1493 | } |
| 1494 | |
| 1495 | static void hid_restart_io(struct hid_device *hid) |
| 1496 | { |
| 1497 | struct usbhid_device *usbhid = hid->driver_data; |
| 1498 | int clear_halt = test_bit(HID_CLEAR_HALT, &usbhid->iofl); |
| 1499 | int reset_pending = test_bit(HID_RESET_PENDING, &usbhid->iofl); |
| 1500 | |
| 1501 | spin_lock_irq(lock: &usbhid->lock); |
| 1502 | clear_bit(HID_SUSPENDED, addr: &usbhid->iofl); |
| 1503 | usbhid_mark_busy(usbhid); |
| 1504 | |
| 1505 | if (clear_halt || reset_pending) |
| 1506 | schedule_work(work: &usbhid->reset_work); |
| 1507 | usbhid->retry_delay = 0; |
| 1508 | spin_unlock_irq(lock: &usbhid->lock); |
| 1509 | |
| 1510 | if (reset_pending || !test_bit(HID_STARTED, &usbhid->iofl)) |
| 1511 | return; |
| 1512 | |
| 1513 | if (!clear_halt) { |
| 1514 | if (hid_start_in(hid) < 0) |
| 1515 | hid_io_error(hid); |
| 1516 | } |
| 1517 | |
| 1518 | spin_lock_irq(lock: &usbhid->lock); |
| 1519 | if (usbhid->urbout && !test_bit(HID_OUT_RUNNING, &usbhid->iofl)) |
| 1520 | usbhid_restart_out_queue(usbhid); |
| 1521 | if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) |
| 1522 | usbhid_restart_ctrl_queue(usbhid); |
| 1523 | spin_unlock_irq(lock: &usbhid->lock); |
| 1524 | } |
| 1525 | |
| 1526 | /* Treat USB reset pretty much the same as suspend/resume */ |
| 1527 | static int hid_pre_reset(struct usb_interface *intf) |
| 1528 | { |
| 1529 | struct hid_device *hid = usb_get_intfdata(intf); |
| 1530 | struct usbhid_device *usbhid = hid->driver_data; |
| 1531 | |
| 1532 | spin_lock_irq(lock: &usbhid->lock); |
| 1533 | set_bit(HID_RESET_PENDING, addr: &usbhid->iofl); |
| 1534 | spin_unlock_irq(lock: &usbhid->lock); |
| 1535 | hid_cease_io(usbhid); |
| 1536 | |
| 1537 | return 0; |
| 1538 | } |
| 1539 | |
| 1540 | /* Same routine used for post_reset and reset_resume */ |
| 1541 | static int hid_post_reset(struct usb_interface *intf) |
| 1542 | { |
| 1543 | struct usb_device *dev = interface_to_usbdev (intf); |
| 1544 | struct hid_device *hid = usb_get_intfdata(intf); |
| 1545 | struct usbhid_device *usbhid = hid->driver_data; |
| 1546 | struct usb_host_interface *interface = intf->cur_altsetting; |
| 1547 | int status; |
| 1548 | char *rdesc; |
| 1549 | |
| 1550 | /* Fetch and examine the HID report descriptor. If this |
| 1551 | * has changed, then rebind. Since usbcore's check of the |
| 1552 | * configuration descriptors passed, we already know that |
| 1553 | * the size of the HID report descriptor has not changed. |
| 1554 | */ |
| 1555 | rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL); |
| 1556 | if (!rdesc) |
| 1557 | return -ENOMEM; |
| 1558 | |
| 1559 | status = hid_get_class_descriptor(dev, |
| 1560 | ifnum: interface->desc.bInterfaceNumber, |
| 1561 | HID_DT_REPORT, buf: rdesc, size: hid->dev_rsize); |
| 1562 | if (status < 0) { |
| 1563 | dbg_hid("reading report descriptor failed (post_reset)\n" ); |
| 1564 | kfree(objp: rdesc); |
| 1565 | return status; |
| 1566 | } |
| 1567 | status = memcmp(p: rdesc, q: hid->dev_rdesc, size: hid->dev_rsize); |
| 1568 | kfree(objp: rdesc); |
| 1569 | if (status != 0) { |
| 1570 | dbg_hid("report descriptor changed\n" ); |
| 1571 | return -EPERM; |
| 1572 | } |
| 1573 | |
| 1574 | /* No need to do another reset or clear a halted endpoint */ |
| 1575 | spin_lock_irq(lock: &usbhid->lock); |
| 1576 | clear_bit(HID_RESET_PENDING, addr: &usbhid->iofl); |
| 1577 | clear_bit(HID_CLEAR_HALT, addr: &usbhid->iofl); |
| 1578 | spin_unlock_irq(lock: &usbhid->lock); |
| 1579 | hid_set_idle(dev, ifnum: intf->cur_altsetting->desc.bInterfaceNumber, report: 0, idle: 0); |
| 1580 | |
| 1581 | hid_restart_io(hid); |
| 1582 | |
| 1583 | return 0; |
| 1584 | } |
| 1585 | |
| 1586 | static int hid_resume_common(struct hid_device *hid, bool driver_suspended) |
| 1587 | { |
| 1588 | int status = 0; |
| 1589 | |
| 1590 | hid_restart_io(hid); |
| 1591 | if (driver_suspended) |
| 1592 | status = hid_driver_resume(hdev: hid); |
| 1593 | return status; |
| 1594 | } |
| 1595 | |
| 1596 | static int hid_suspend(struct usb_interface *intf, pm_message_t message) |
| 1597 | { |
| 1598 | struct hid_device *hid = usb_get_intfdata(intf); |
| 1599 | struct usbhid_device *usbhid = hid->driver_data; |
| 1600 | int status = 0; |
| 1601 | bool driver_suspended = false; |
| 1602 | unsigned int ledcount; |
| 1603 | |
| 1604 | if (PMSG_IS_AUTO(message)) { |
| 1605 | ledcount = hidinput_count_leds(hid); |
| 1606 | spin_lock_irq(lock: &usbhid->lock); /* Sync with error handler */ |
| 1607 | if (!test_bit(HID_RESET_PENDING, &usbhid->iofl) |
| 1608 | && !test_bit(HID_CLEAR_HALT, &usbhid->iofl) |
| 1609 | && !test_bit(HID_OUT_RUNNING, &usbhid->iofl) |
| 1610 | && !test_bit(HID_CTRL_RUNNING, &usbhid->iofl) |
| 1611 | && !test_bit(HID_KEYS_PRESSED, &usbhid->iofl) |
| 1612 | && (!ledcount || ignoreled)) |
| 1613 | { |
| 1614 | set_bit(HID_SUSPENDED, addr: &usbhid->iofl); |
| 1615 | spin_unlock_irq(lock: &usbhid->lock); |
| 1616 | status = hid_driver_suspend(hdev: hid, state: message); |
| 1617 | if (status < 0) |
| 1618 | goto failed; |
| 1619 | driver_suspended = true; |
| 1620 | } else { |
| 1621 | usbhid_mark_busy(usbhid); |
| 1622 | spin_unlock_irq(lock: &usbhid->lock); |
| 1623 | return -EBUSY; |
| 1624 | } |
| 1625 | |
| 1626 | } else { |
| 1627 | /* TODO: resume() might need to handle suspend failure */ |
| 1628 | status = hid_driver_suspend(hdev: hid, state: message); |
| 1629 | driver_suspended = true; |
| 1630 | spin_lock_irq(lock: &usbhid->lock); |
| 1631 | set_bit(HID_SUSPENDED, addr: &usbhid->iofl); |
| 1632 | spin_unlock_irq(lock: &usbhid->lock); |
| 1633 | if (usbhid_wait_io(hid) < 0) |
| 1634 | status = -EIO; |
| 1635 | } |
| 1636 | |
| 1637 | hid_cancel_delayed_stuff(usbhid); |
| 1638 | hid_cease_io(usbhid); |
| 1639 | |
| 1640 | if (PMSG_IS_AUTO(message) && test_bit(HID_KEYS_PRESSED, &usbhid->iofl)) { |
| 1641 | /* lost race against keypresses */ |
| 1642 | status = -EBUSY; |
| 1643 | goto failed; |
| 1644 | } |
| 1645 | dev_dbg(&intf->dev, "suspend\n" ); |
| 1646 | return status; |
| 1647 | |
| 1648 | failed: |
| 1649 | hid_resume_common(hid, driver_suspended); |
| 1650 | return status; |
| 1651 | } |
| 1652 | |
| 1653 | static int hid_resume(struct usb_interface *intf) |
| 1654 | { |
| 1655 | struct hid_device *hid = usb_get_intfdata (intf); |
| 1656 | int status; |
| 1657 | |
| 1658 | status = hid_resume_common(hid, driver_suspended: true); |
| 1659 | dev_dbg(&intf->dev, "resume status %d\n" , status); |
| 1660 | return 0; |
| 1661 | } |
| 1662 | |
| 1663 | static int hid_reset_resume(struct usb_interface *intf) |
| 1664 | { |
| 1665 | struct hid_device *hid = usb_get_intfdata(intf); |
| 1666 | int status; |
| 1667 | |
| 1668 | status = hid_post_reset(intf); |
| 1669 | if (status >= 0) { |
| 1670 | int ret = hid_driver_reset_resume(hdev: hid); |
| 1671 | if (ret < 0) |
| 1672 | status = ret; |
| 1673 | } |
| 1674 | return status; |
| 1675 | } |
| 1676 | |
| 1677 | static const struct usb_device_id hid_usb_ids[] = { |
| 1678 | { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, |
| 1679 | .bInterfaceClass = USB_INTERFACE_CLASS_HID }, |
| 1680 | { } /* Terminating entry */ |
| 1681 | }; |
| 1682 | |
| 1683 | MODULE_DEVICE_TABLE (usb, hid_usb_ids); |
| 1684 | |
| 1685 | static struct usb_driver hid_driver = { |
| 1686 | .name = "usbhid" , |
| 1687 | .probe = usbhid_probe, |
| 1688 | .disconnect = usbhid_disconnect, |
| 1689 | .suspend = pm_ptr(hid_suspend), |
| 1690 | .resume = pm_ptr(hid_resume), |
| 1691 | .reset_resume = pm_ptr(hid_reset_resume), |
| 1692 | .pre_reset = hid_pre_reset, |
| 1693 | .post_reset = hid_post_reset, |
| 1694 | .id_table = hid_usb_ids, |
| 1695 | .supports_autosuspend = 1, |
| 1696 | }; |
| 1697 | |
| 1698 | struct usb_interface *usbhid_find_interface(int minor) |
| 1699 | { |
| 1700 | return usb_find_interface(drv: &hid_driver, minor); |
| 1701 | } |
| 1702 | |
| 1703 | static int __init hid_init(void) |
| 1704 | { |
| 1705 | int retval; |
| 1706 | |
| 1707 | retval = hid_quirks_init(quirks_param, BUS_USB, MAX_USBHID_BOOT_QUIRKS); |
| 1708 | if (retval) |
| 1709 | goto usbhid_quirks_init_fail; |
| 1710 | retval = usb_register(&hid_driver); |
| 1711 | if (retval) |
| 1712 | goto usb_register_fail; |
| 1713 | pr_info(KBUILD_MODNAME ": " DRIVER_DESC "\n" ); |
| 1714 | |
| 1715 | return 0; |
| 1716 | usb_register_fail: |
| 1717 | hid_quirks_exit(BUS_USB); |
| 1718 | usbhid_quirks_init_fail: |
| 1719 | return retval; |
| 1720 | } |
| 1721 | |
| 1722 | static void __exit hid_exit(void) |
| 1723 | { |
| 1724 | usb_deregister(&hid_driver); |
| 1725 | hid_quirks_exit(BUS_USB); |
| 1726 | } |
| 1727 | |
| 1728 | module_init(hid_init); |
| 1729 | module_exit(hid_exit); |
| 1730 | |
| 1731 | MODULE_AUTHOR("Andreas Gal" ); |
| 1732 | MODULE_AUTHOR("Vojtech Pavlik" ); |
| 1733 | MODULE_AUTHOR("Jiri Kosina" ); |
| 1734 | MODULE_DESCRIPTION(DRIVER_DESC); |
| 1735 | MODULE_LICENSE("GPL" ); |
| 1736 | |