1 | // SPDX-License-Identifier: GPL-2.0+ |
2 | /* |
3 | * Compaq Hot Plug Controller Driver |
4 | * |
5 | * Copyright (C) 1995,2001 Compaq Computer Corporation |
6 | * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
7 | * Copyright (C) 2001 IBM Corp. |
8 | * |
9 | * All rights reserved. |
10 | * |
11 | * Send feedback to <greg@kroah.com> |
12 | * |
13 | */ |
14 | |
15 | #include <linux/module.h> |
16 | #include <linux/kernel.h> |
17 | #include <linux/types.h> |
18 | #include <linux/slab.h> |
19 | #include <linux/workqueue.h> |
20 | #include <linux/interrupt.h> |
21 | #include <linux/delay.h> |
22 | #include <linux/wait.h> |
23 | #include <linux/pci.h> |
24 | #include <linux/pci_hotplug.h> |
25 | #include <linux/kthread.h> |
26 | #include "cpqphp.h" |
27 | |
28 | static u32 configure_new_device(struct controller *ctrl, struct pci_func *func, |
29 | u8 behind_bridge, struct resource_lists *resources); |
30 | static int configure_new_function(struct controller *ctrl, struct pci_func *func, |
31 | u8 behind_bridge, struct resource_lists *resources); |
32 | static void interrupt_event_handler(struct controller *ctrl); |
33 | |
34 | |
35 | static struct task_struct *cpqhp_event_thread; |
36 | static struct timer_list *pushbutton_pending; /* = NULL */ |
37 | |
38 | /* delay is in jiffies to wait for */ |
39 | static void long_delay(int delay) |
40 | { |
41 | /* |
42 | * XXX(hch): if someone is bored please convert all callers |
43 | * to call msleep_interruptible directly. They really want |
44 | * to specify timeouts in natural units and spend a lot of |
45 | * effort converting them to jiffies.. |
46 | */ |
47 | msleep_interruptible(msecs: jiffies_to_msecs(j: delay)); |
48 | } |
49 | |
50 | |
51 | /* FIXME: The following line needs to be somewhere else... */ |
52 | #define WRONG_BUS_FREQUENCY 0x07 |
53 | static u8 handle_switch_change(u8 change, struct controller *ctrl) |
54 | { |
55 | int hp_slot; |
56 | u8 rc = 0; |
57 | u16 temp_word; |
58 | struct pci_func *func; |
59 | struct event_info *taskInfo; |
60 | |
61 | if (!change) |
62 | return 0; |
63 | |
64 | /* Switch Change */ |
65 | dbg("cpqsbd: Switch interrupt received.\n" ); |
66 | |
67 | for (hp_slot = 0; hp_slot < 6; hp_slot++) { |
68 | if (change & (0x1L << hp_slot)) { |
69 | /* |
70 | * this one changed. |
71 | */ |
72 | func = cpqhp_slot_find(bus: ctrl->bus, |
73 | device: (hp_slot + ctrl->slot_device_offset), index: 0); |
74 | |
75 | /* this is the structure that tells the worker thread |
76 | * what to do |
77 | */ |
78 | taskInfo = &(ctrl->event_queue[ctrl->next_event]); |
79 | ctrl->next_event = (ctrl->next_event + 1) % 10; |
80 | taskInfo->hp_slot = hp_slot; |
81 | |
82 | rc++; |
83 | |
84 | temp_word = ctrl->ctrl_int_comp >> 16; |
85 | func->presence_save = (temp_word >> hp_slot) & 0x01; |
86 | func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; |
87 | |
88 | if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) { |
89 | /* |
90 | * Switch opened |
91 | */ |
92 | |
93 | func->switch_save = 0; |
94 | |
95 | taskInfo->event_type = INT_SWITCH_OPEN; |
96 | } else { |
97 | /* |
98 | * Switch closed |
99 | */ |
100 | |
101 | func->switch_save = 0x10; |
102 | |
103 | taskInfo->event_type = INT_SWITCH_CLOSE; |
104 | } |
105 | } |
106 | } |
107 | |
108 | return rc; |
109 | } |
110 | |
111 | /** |
112 | * cpqhp_find_slot - find the struct slot of given device |
113 | * @ctrl: scan lots of this controller |
114 | * @device: the device id to find |
115 | */ |
116 | static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device) |
117 | { |
118 | struct slot *slot = ctrl->slot; |
119 | |
120 | while (slot && (slot->device != device)) |
121 | slot = slot->next; |
122 | |
123 | return slot; |
124 | } |
125 | |
126 | |
127 | static u8 handle_presence_change(u16 change, struct controller *ctrl) |
128 | { |
129 | int hp_slot; |
130 | u8 rc = 0; |
131 | u8 temp_byte; |
132 | u16 temp_word; |
133 | struct pci_func *func; |
134 | struct event_info *taskInfo; |
135 | struct slot *p_slot; |
136 | |
137 | if (!change) |
138 | return 0; |
139 | |
140 | /* |
141 | * Presence Change |
142 | */ |
143 | dbg("cpqsbd: Presence/Notify input change.\n" ); |
144 | dbg(" Changed bits are 0x%4.4x\n" , change); |
145 | |
146 | for (hp_slot = 0; hp_slot < 6; hp_slot++) { |
147 | if (change & (0x0101 << hp_slot)) { |
148 | /* |
149 | * this one changed. |
150 | */ |
151 | func = cpqhp_slot_find(bus: ctrl->bus, |
152 | device: (hp_slot + ctrl->slot_device_offset), index: 0); |
153 | |
154 | taskInfo = &(ctrl->event_queue[ctrl->next_event]); |
155 | ctrl->next_event = (ctrl->next_event + 1) % 10; |
156 | taskInfo->hp_slot = hp_slot; |
157 | |
158 | rc++; |
159 | |
160 | p_slot = cpqhp_find_slot(ctrl, device: hp_slot + (readb(addr: ctrl->hpc_reg + SLOT_MASK) >> 4)); |
161 | if (!p_slot) |
162 | return 0; |
163 | |
164 | /* If the switch closed, must be a button |
165 | * If not in button mode, nevermind |
166 | */ |
167 | if (func->switch_save && (ctrl->push_button == 1)) { |
168 | temp_word = ctrl->ctrl_int_comp >> 16; |
169 | temp_byte = (temp_word >> hp_slot) & 0x01; |
170 | temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02; |
171 | |
172 | if (temp_byte != func->presence_save) { |
173 | /* |
174 | * button Pressed (doesn't do anything) |
175 | */ |
176 | dbg("hp_slot %d button pressed\n" , hp_slot); |
177 | taskInfo->event_type = INT_BUTTON_PRESS; |
178 | } else { |
179 | /* |
180 | * button Released - TAKE ACTION!!!! |
181 | */ |
182 | dbg("hp_slot %d button released\n" , hp_slot); |
183 | taskInfo->event_type = INT_BUTTON_RELEASE; |
184 | |
185 | /* Cancel if we are still blinking */ |
186 | if ((p_slot->state == BLINKINGON_STATE) |
187 | || (p_slot->state == BLINKINGOFF_STATE)) { |
188 | taskInfo->event_type = INT_BUTTON_CANCEL; |
189 | dbg("hp_slot %d button cancel\n" , hp_slot); |
190 | } else if ((p_slot->state == POWERON_STATE) |
191 | || (p_slot->state == POWEROFF_STATE)) { |
192 | /* info(msg_button_ignore, p_slot->number); */ |
193 | taskInfo->event_type = INT_BUTTON_IGNORE; |
194 | dbg("hp_slot %d button ignore\n" , hp_slot); |
195 | } |
196 | } |
197 | } else { |
198 | /* Switch is open, assume a presence change |
199 | * Save the presence state |
200 | */ |
201 | temp_word = ctrl->ctrl_int_comp >> 16; |
202 | func->presence_save = (temp_word >> hp_slot) & 0x01; |
203 | func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; |
204 | |
205 | if ((!(ctrl->ctrl_int_comp & (0x010000 << hp_slot))) || |
206 | (!(ctrl->ctrl_int_comp & (0x01000000 << hp_slot)))) { |
207 | /* Present */ |
208 | taskInfo->event_type = INT_PRESENCE_ON; |
209 | } else { |
210 | /* Not Present */ |
211 | taskInfo->event_type = INT_PRESENCE_OFF; |
212 | } |
213 | } |
214 | } |
215 | } |
216 | |
217 | return rc; |
218 | } |
219 | |
220 | |
221 | static u8 handle_power_fault(u8 change, struct controller *ctrl) |
222 | { |
223 | int hp_slot; |
224 | u8 rc = 0; |
225 | struct pci_func *func; |
226 | struct event_info *taskInfo; |
227 | |
228 | if (!change) |
229 | return 0; |
230 | |
231 | /* |
232 | * power fault |
233 | */ |
234 | |
235 | info("power fault interrupt\n" ); |
236 | |
237 | for (hp_slot = 0; hp_slot < 6; hp_slot++) { |
238 | if (change & (0x01 << hp_slot)) { |
239 | /* |
240 | * this one changed. |
241 | */ |
242 | func = cpqhp_slot_find(bus: ctrl->bus, |
243 | device: (hp_slot + ctrl->slot_device_offset), index: 0); |
244 | |
245 | taskInfo = &(ctrl->event_queue[ctrl->next_event]); |
246 | ctrl->next_event = (ctrl->next_event + 1) % 10; |
247 | taskInfo->hp_slot = hp_slot; |
248 | |
249 | rc++; |
250 | |
251 | if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) { |
252 | /* |
253 | * power fault Cleared |
254 | */ |
255 | func->status = 0x00; |
256 | |
257 | taskInfo->event_type = INT_POWER_FAULT_CLEAR; |
258 | } else { |
259 | /* |
260 | * power fault |
261 | */ |
262 | taskInfo->event_type = INT_POWER_FAULT; |
263 | |
264 | if (ctrl->rev < 4) { |
265 | amber_LED_on(ctrl, slot: hp_slot); |
266 | green_LED_off(ctrl, slot: hp_slot); |
267 | set_SOGO(ctrl); |
268 | |
269 | /* this is a fatal condition, we want |
270 | * to crash the machine to protect from |
271 | * data corruption. simulated_NMI |
272 | * shouldn't ever return */ |
273 | /* FIXME |
274 | simulated_NMI(hp_slot, ctrl); */ |
275 | |
276 | /* The following code causes a software |
277 | * crash just in case simulated_NMI did |
278 | * return */ |
279 | /*FIXME |
280 | panic(msg_power_fault); */ |
281 | } else { |
282 | /* set power fault status for this board */ |
283 | func->status = 0xFF; |
284 | info("power fault bit %x set\n" , hp_slot); |
285 | } |
286 | } |
287 | } |
288 | } |
289 | |
290 | return rc; |
291 | } |
292 | |
293 | |
294 | /** |
295 | * sort_by_size - sort nodes on the list by their length, smallest first. |
296 | * @head: list to sort |
297 | */ |
298 | static int sort_by_size(struct pci_resource **head) |
299 | { |
300 | struct pci_resource *current_res; |
301 | struct pci_resource *next_res; |
302 | int out_of_order = 1; |
303 | |
304 | if (!(*head)) |
305 | return 1; |
306 | |
307 | if (!((*head)->next)) |
308 | return 0; |
309 | |
310 | while (out_of_order) { |
311 | out_of_order = 0; |
312 | |
313 | /* Special case for swapping list head */ |
314 | if (((*head)->next) && |
315 | ((*head)->length > (*head)->next->length)) { |
316 | out_of_order++; |
317 | current_res = *head; |
318 | *head = (*head)->next; |
319 | current_res->next = (*head)->next; |
320 | (*head)->next = current_res; |
321 | } |
322 | |
323 | current_res = *head; |
324 | |
325 | while (current_res->next && current_res->next->next) { |
326 | if (current_res->next->length > current_res->next->next->length) { |
327 | out_of_order++; |
328 | next_res = current_res->next; |
329 | current_res->next = current_res->next->next; |
330 | current_res = current_res->next; |
331 | next_res->next = current_res->next; |
332 | current_res->next = next_res; |
333 | } else |
334 | current_res = current_res->next; |
335 | } |
336 | } /* End of out_of_order loop */ |
337 | |
338 | return 0; |
339 | } |
340 | |
341 | |
342 | /** |
343 | * sort_by_max_size - sort nodes on the list by their length, largest first. |
344 | * @head: list to sort |
345 | */ |
346 | static int sort_by_max_size(struct pci_resource **head) |
347 | { |
348 | struct pci_resource *current_res; |
349 | struct pci_resource *next_res; |
350 | int out_of_order = 1; |
351 | |
352 | if (!(*head)) |
353 | return 1; |
354 | |
355 | if (!((*head)->next)) |
356 | return 0; |
357 | |
358 | while (out_of_order) { |
359 | out_of_order = 0; |
360 | |
361 | /* Special case for swapping list head */ |
362 | if (((*head)->next) && |
363 | ((*head)->length < (*head)->next->length)) { |
364 | out_of_order++; |
365 | current_res = *head; |
366 | *head = (*head)->next; |
367 | current_res->next = (*head)->next; |
368 | (*head)->next = current_res; |
369 | } |
370 | |
371 | current_res = *head; |
372 | |
373 | while (current_res->next && current_res->next->next) { |
374 | if (current_res->next->length < current_res->next->next->length) { |
375 | out_of_order++; |
376 | next_res = current_res->next; |
377 | current_res->next = current_res->next->next; |
378 | current_res = current_res->next; |
379 | next_res->next = current_res->next; |
380 | current_res->next = next_res; |
381 | } else |
382 | current_res = current_res->next; |
383 | } |
384 | } /* End of out_of_order loop */ |
385 | |
386 | return 0; |
387 | } |
388 | |
389 | |
390 | /** |
391 | * do_pre_bridge_resource_split - find node of resources that are unused |
392 | * @head: new list head |
393 | * @orig_head: original list head |
394 | * @alignment: max node size (?) |
395 | */ |
396 | static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **head, |
397 | struct pci_resource **orig_head, u32 alignment) |
398 | { |
399 | struct pci_resource *prevnode = NULL; |
400 | struct pci_resource *node; |
401 | struct pci_resource *split_node; |
402 | u32 rc; |
403 | u32 temp_dword; |
404 | dbg("do_pre_bridge_resource_split\n" ); |
405 | |
406 | if (!(*head) || !(*orig_head)) |
407 | return NULL; |
408 | |
409 | rc = cpqhp_resource_sort_and_combine(head); |
410 | |
411 | if (rc) |
412 | return NULL; |
413 | |
414 | if ((*head)->base != (*orig_head)->base) |
415 | return NULL; |
416 | |
417 | if ((*head)->length == (*orig_head)->length) |
418 | return NULL; |
419 | |
420 | |
421 | /* If we got here, there the bridge requires some of the resource, but |
422 | * we may be able to split some off of the front |
423 | */ |
424 | |
425 | node = *head; |
426 | |
427 | if (node->length & (alignment - 1)) { |
428 | /* this one isn't an aligned length, so we'll make a new entry |
429 | * and split it up. |
430 | */ |
431 | split_node = kmalloc(size: sizeof(*split_node), GFP_KERNEL); |
432 | |
433 | if (!split_node) |
434 | return NULL; |
435 | |
436 | temp_dword = (node->length | (alignment-1)) + 1 - alignment; |
437 | |
438 | split_node->base = node->base; |
439 | split_node->length = temp_dword; |
440 | |
441 | node->length -= temp_dword; |
442 | node->base += split_node->length; |
443 | |
444 | /* Put it in the list */ |
445 | *head = split_node; |
446 | split_node->next = node; |
447 | } |
448 | |
449 | if (node->length < alignment) |
450 | return NULL; |
451 | |
452 | /* Now unlink it */ |
453 | if (*head == node) { |
454 | *head = node->next; |
455 | } else { |
456 | prevnode = *head; |
457 | while (prevnode->next != node) |
458 | prevnode = prevnode->next; |
459 | |
460 | prevnode->next = node->next; |
461 | } |
462 | node->next = NULL; |
463 | |
464 | return node; |
465 | } |
466 | |
467 | |
468 | /** |
469 | * do_bridge_resource_split - find one node of resources that aren't in use |
470 | * @head: list head |
471 | * @alignment: max node size (?) |
472 | */ |
473 | static struct pci_resource *do_bridge_resource_split(struct pci_resource **head, u32 alignment) |
474 | { |
475 | struct pci_resource *prevnode = NULL; |
476 | struct pci_resource *node; |
477 | u32 rc; |
478 | u32 temp_dword; |
479 | |
480 | rc = cpqhp_resource_sort_and_combine(head); |
481 | |
482 | if (rc) |
483 | return NULL; |
484 | |
485 | node = *head; |
486 | |
487 | while (node->next) { |
488 | prevnode = node; |
489 | node = node->next; |
490 | kfree(objp: prevnode); |
491 | } |
492 | |
493 | if (node->length < alignment) |
494 | goto error; |
495 | |
496 | if (node->base & (alignment - 1)) { |
497 | /* Short circuit if adjusted size is too small */ |
498 | temp_dword = (node->base | (alignment-1)) + 1; |
499 | if ((node->length - (temp_dword - node->base)) < alignment) |
500 | goto error; |
501 | |
502 | node->length -= (temp_dword - node->base); |
503 | node->base = temp_dword; |
504 | } |
505 | |
506 | if (node->length & (alignment - 1)) |
507 | /* There's stuff in use after this node */ |
508 | goto error; |
509 | |
510 | return node; |
511 | error: |
512 | kfree(objp: node); |
513 | return NULL; |
514 | } |
515 | |
516 | |
517 | /** |
518 | * get_io_resource - find first node of given size not in ISA aliasing window. |
519 | * @head: list to search |
520 | * @size: size of node to find, must be a power of two. |
521 | * |
522 | * Description: This function sorts the resource list by size and then |
523 | * returns the first node of "size" length that is not in the ISA aliasing |
524 | * window. If it finds a node larger than "size" it will split it up. |
525 | */ |
526 | static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size) |
527 | { |
528 | struct pci_resource *prevnode; |
529 | struct pci_resource *node; |
530 | struct pci_resource *split_node; |
531 | u32 temp_dword; |
532 | |
533 | if (!(*head)) |
534 | return NULL; |
535 | |
536 | if (cpqhp_resource_sort_and_combine(head)) |
537 | return NULL; |
538 | |
539 | if (sort_by_size(head)) |
540 | return NULL; |
541 | |
542 | for (node = *head; node; node = node->next) { |
543 | if (node->length < size) |
544 | continue; |
545 | |
546 | if (node->base & (size - 1)) { |
547 | /* this one isn't base aligned properly |
548 | * so we'll make a new entry and split it up |
549 | */ |
550 | temp_dword = (node->base | (size-1)) + 1; |
551 | |
552 | /* Short circuit if adjusted size is too small */ |
553 | if ((node->length - (temp_dword - node->base)) < size) |
554 | continue; |
555 | |
556 | split_node = kmalloc(size: sizeof(*split_node), GFP_KERNEL); |
557 | |
558 | if (!split_node) |
559 | return NULL; |
560 | |
561 | split_node->base = node->base; |
562 | split_node->length = temp_dword - node->base; |
563 | node->base = temp_dword; |
564 | node->length -= split_node->length; |
565 | |
566 | /* Put it in the list */ |
567 | split_node->next = node->next; |
568 | node->next = split_node; |
569 | } /* End of non-aligned base */ |
570 | |
571 | /* Don't need to check if too small since we already did */ |
572 | if (node->length > size) { |
573 | /* this one is longer than we need |
574 | * so we'll make a new entry and split it up |
575 | */ |
576 | split_node = kmalloc(size: sizeof(*split_node), GFP_KERNEL); |
577 | |
578 | if (!split_node) |
579 | return NULL; |
580 | |
581 | split_node->base = node->base + size; |
582 | split_node->length = node->length - size; |
583 | node->length = size; |
584 | |
585 | /* Put it in the list */ |
586 | split_node->next = node->next; |
587 | node->next = split_node; |
588 | } /* End of too big on top end */ |
589 | |
590 | /* For IO make sure it's not in the ISA aliasing space */ |
591 | if (node->base & 0x300L) |
592 | continue; |
593 | |
594 | /* If we got here, then it is the right size |
595 | * Now take it out of the list and break |
596 | */ |
597 | if (*head == node) { |
598 | *head = node->next; |
599 | } else { |
600 | prevnode = *head; |
601 | while (prevnode->next != node) |
602 | prevnode = prevnode->next; |
603 | |
604 | prevnode->next = node->next; |
605 | } |
606 | node->next = NULL; |
607 | break; |
608 | } |
609 | |
610 | return node; |
611 | } |
612 | |
613 | |
614 | /** |
615 | * get_max_resource - get largest node which has at least the given size. |
616 | * @head: the list to search the node in |
617 | * @size: the minimum size of the node to find |
618 | * |
619 | * Description: Gets the largest node that is at least "size" big from the |
620 | * list pointed to by head. It aligns the node on top and bottom |
621 | * to "size" alignment before returning it. |
622 | */ |
623 | static struct pci_resource *get_max_resource(struct pci_resource **head, u32 size) |
624 | { |
625 | struct pci_resource *max; |
626 | struct pci_resource *temp; |
627 | struct pci_resource *split_node; |
628 | u32 temp_dword; |
629 | |
630 | if (cpqhp_resource_sort_and_combine(head)) |
631 | return NULL; |
632 | |
633 | if (sort_by_max_size(head)) |
634 | return NULL; |
635 | |
636 | for (max = *head; max; max = max->next) { |
637 | /* If not big enough we could probably just bail, |
638 | * instead we'll continue to the next. |
639 | */ |
640 | if (max->length < size) |
641 | continue; |
642 | |
643 | if (max->base & (size - 1)) { |
644 | /* this one isn't base aligned properly |
645 | * so we'll make a new entry and split it up |
646 | */ |
647 | temp_dword = (max->base | (size-1)) + 1; |
648 | |
649 | /* Short circuit if adjusted size is too small */ |
650 | if ((max->length - (temp_dword - max->base)) < size) |
651 | continue; |
652 | |
653 | split_node = kmalloc(size: sizeof(*split_node), GFP_KERNEL); |
654 | |
655 | if (!split_node) |
656 | return NULL; |
657 | |
658 | split_node->base = max->base; |
659 | split_node->length = temp_dword - max->base; |
660 | max->base = temp_dword; |
661 | max->length -= split_node->length; |
662 | |
663 | split_node->next = max->next; |
664 | max->next = split_node; |
665 | } |
666 | |
667 | if ((max->base + max->length) & (size - 1)) { |
668 | /* this one isn't end aligned properly at the top |
669 | * so we'll make a new entry and split it up |
670 | */ |
671 | split_node = kmalloc(size: sizeof(*split_node), GFP_KERNEL); |
672 | |
673 | if (!split_node) |
674 | return NULL; |
675 | temp_dword = ((max->base + max->length) & ~(size - 1)); |
676 | split_node->base = temp_dword; |
677 | split_node->length = max->length + max->base |
678 | - split_node->base; |
679 | max->length -= split_node->length; |
680 | |
681 | split_node->next = max->next; |
682 | max->next = split_node; |
683 | } |
684 | |
685 | /* Make sure it didn't shrink too much when we aligned it */ |
686 | if (max->length < size) |
687 | continue; |
688 | |
689 | /* Now take it out of the list */ |
690 | temp = *head; |
691 | if (temp == max) { |
692 | *head = max->next; |
693 | } else { |
694 | while (temp && temp->next != max) |
695 | temp = temp->next; |
696 | |
697 | if (temp) |
698 | temp->next = max->next; |
699 | } |
700 | |
701 | max->next = NULL; |
702 | break; |
703 | } |
704 | |
705 | return max; |
706 | } |
707 | |
708 | |
709 | /** |
710 | * get_resource - find resource of given size and split up larger ones. |
711 | * @head: the list to search for resources |
712 | * @size: the size limit to use |
713 | * |
714 | * Description: This function sorts the resource list by size and then |
715 | * returns the first node of "size" length. If it finds a node |
716 | * larger than "size" it will split it up. |
717 | * |
718 | * size must be a power of two. |
719 | */ |
720 | static struct pci_resource *get_resource(struct pci_resource **head, u32 size) |
721 | { |
722 | struct pci_resource *prevnode; |
723 | struct pci_resource *node; |
724 | struct pci_resource *split_node; |
725 | u32 temp_dword; |
726 | |
727 | if (cpqhp_resource_sort_and_combine(head)) |
728 | return NULL; |
729 | |
730 | if (sort_by_size(head)) |
731 | return NULL; |
732 | |
733 | for (node = *head; node; node = node->next) { |
734 | dbg("%s: req_size =%x node=%p, base=%x, length=%x\n" , |
735 | __func__, size, node, node->base, node->length); |
736 | if (node->length < size) |
737 | continue; |
738 | |
739 | if (node->base & (size - 1)) { |
740 | dbg("%s: not aligned\n" , __func__); |
741 | /* this one isn't base aligned properly |
742 | * so we'll make a new entry and split it up |
743 | */ |
744 | temp_dword = (node->base | (size-1)) + 1; |
745 | |
746 | /* Short circuit if adjusted size is too small */ |
747 | if ((node->length - (temp_dword - node->base)) < size) |
748 | continue; |
749 | |
750 | split_node = kmalloc(size: sizeof(*split_node), GFP_KERNEL); |
751 | |
752 | if (!split_node) |
753 | return NULL; |
754 | |
755 | split_node->base = node->base; |
756 | split_node->length = temp_dword - node->base; |
757 | node->base = temp_dword; |
758 | node->length -= split_node->length; |
759 | |
760 | split_node->next = node->next; |
761 | node->next = split_node; |
762 | } /* End of non-aligned base */ |
763 | |
764 | /* Don't need to check if too small since we already did */ |
765 | if (node->length > size) { |
766 | dbg("%s: too big\n" , __func__); |
767 | /* this one is longer than we need |
768 | * so we'll make a new entry and split it up |
769 | */ |
770 | split_node = kmalloc(size: sizeof(*split_node), GFP_KERNEL); |
771 | |
772 | if (!split_node) |
773 | return NULL; |
774 | |
775 | split_node->base = node->base + size; |
776 | split_node->length = node->length - size; |
777 | node->length = size; |
778 | |
779 | /* Put it in the list */ |
780 | split_node->next = node->next; |
781 | node->next = split_node; |
782 | } /* End of too big on top end */ |
783 | |
784 | dbg("%s: got one!!!\n" , __func__); |
785 | /* If we got here, then it is the right size |
786 | * Now take it out of the list */ |
787 | if (*head == node) { |
788 | *head = node->next; |
789 | } else { |
790 | prevnode = *head; |
791 | while (prevnode->next != node) |
792 | prevnode = prevnode->next; |
793 | |
794 | prevnode->next = node->next; |
795 | } |
796 | node->next = NULL; |
797 | break; |
798 | } |
799 | return node; |
800 | } |
801 | |
802 | |
803 | /** |
804 | * cpqhp_resource_sort_and_combine - sort nodes by base addresses and clean up |
805 | * @head: the list to sort and clean up |
806 | * |
807 | * Description: Sorts all of the nodes in the list in ascending order by |
808 | * their base addresses. Also does garbage collection by |
809 | * combining adjacent nodes. |
810 | * |
811 | * Returns %0 if success. |
812 | */ |
813 | int cpqhp_resource_sort_and_combine(struct pci_resource **head) |
814 | { |
815 | struct pci_resource *node1; |
816 | struct pci_resource *node2; |
817 | int out_of_order = 1; |
818 | |
819 | dbg("%s: head = %p, *head = %p\n" , __func__, head, *head); |
820 | |
821 | if (!(*head)) |
822 | return 1; |
823 | |
824 | dbg("*head->next = %p\n" , (*head)->next); |
825 | |
826 | if (!(*head)->next) |
827 | return 0; /* only one item on the list, already sorted! */ |
828 | |
829 | dbg("*head->base = 0x%x\n" , (*head)->base); |
830 | dbg("*head->next->base = 0x%x\n" , (*head)->next->base); |
831 | while (out_of_order) { |
832 | out_of_order = 0; |
833 | |
834 | /* Special case for swapping list head */ |
835 | if (((*head)->next) && |
836 | ((*head)->base > (*head)->next->base)) { |
837 | node1 = *head; |
838 | (*head) = (*head)->next; |
839 | node1->next = (*head)->next; |
840 | (*head)->next = node1; |
841 | out_of_order++; |
842 | } |
843 | |
844 | node1 = (*head); |
845 | |
846 | while (node1->next && node1->next->next) { |
847 | if (node1->next->base > node1->next->next->base) { |
848 | out_of_order++; |
849 | node2 = node1->next; |
850 | node1->next = node1->next->next; |
851 | node1 = node1->next; |
852 | node2->next = node1->next; |
853 | node1->next = node2; |
854 | } else |
855 | node1 = node1->next; |
856 | } |
857 | } /* End of out_of_order loop */ |
858 | |
859 | node1 = *head; |
860 | |
861 | while (node1 && node1->next) { |
862 | if ((node1->base + node1->length) == node1->next->base) { |
863 | /* Combine */ |
864 | dbg("8..\n" ); |
865 | node1->length += node1->next->length; |
866 | node2 = node1->next; |
867 | node1->next = node1->next->next; |
868 | kfree(objp: node2); |
869 | } else |
870 | node1 = node1->next; |
871 | } |
872 | |
873 | return 0; |
874 | } |
875 | |
876 | |
877 | irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data) |
878 | { |
879 | struct controller *ctrl = data; |
880 | u8 schedule_flag = 0; |
881 | u8 reset; |
882 | u16 misc; |
883 | u32 Diff; |
884 | |
885 | |
886 | misc = readw(addr: ctrl->hpc_reg + MISC); |
887 | /* |
888 | * Check to see if it was our interrupt |
889 | */ |
890 | if (!(misc & 0x000C)) |
891 | return IRQ_NONE; |
892 | |
893 | if (misc & 0x0004) { |
894 | /* |
895 | * Serial Output interrupt Pending |
896 | */ |
897 | |
898 | /* Clear the interrupt */ |
899 | misc |= 0x0004; |
900 | writew(val: misc, addr: ctrl->hpc_reg + MISC); |
901 | |
902 | /* Read to clear posted writes */ |
903 | misc = readw(addr: ctrl->hpc_reg + MISC); |
904 | |
905 | dbg("%s - waking up\n" , __func__); |
906 | wake_up_interruptible(&ctrl->queue); |
907 | } |
908 | |
909 | if (misc & 0x0008) { |
910 | /* General-interrupt-input interrupt Pending */ |
911 | Diff = readl(addr: ctrl->hpc_reg + INT_INPUT_CLEAR) ^ ctrl->ctrl_int_comp; |
912 | |
913 | ctrl->ctrl_int_comp = readl(addr: ctrl->hpc_reg + INT_INPUT_CLEAR); |
914 | |
915 | /* Clear the interrupt */ |
916 | writel(val: Diff, addr: ctrl->hpc_reg + INT_INPUT_CLEAR); |
917 | |
918 | /* Read it back to clear any posted writes */ |
919 | readl(addr: ctrl->hpc_reg + INT_INPUT_CLEAR); |
920 | |
921 | if (!Diff) |
922 | /* Clear all interrupts */ |
923 | writel(val: 0xFFFFFFFF, addr: ctrl->hpc_reg + INT_INPUT_CLEAR); |
924 | |
925 | schedule_flag += handle_switch_change(change: (u8)(Diff & 0xFFL), ctrl); |
926 | schedule_flag += handle_presence_change(change: (u16)((Diff & 0xFFFF0000L) >> 16), ctrl); |
927 | schedule_flag += handle_power_fault(change: (u8)((Diff & 0xFF00L) >> 8), ctrl); |
928 | } |
929 | |
930 | reset = readb(addr: ctrl->hpc_reg + RESET_FREQ_MODE); |
931 | if (reset & 0x40) { |
932 | /* Bus reset has completed */ |
933 | reset &= 0xCF; |
934 | writeb(val: reset, addr: ctrl->hpc_reg + RESET_FREQ_MODE); |
935 | reset = readb(addr: ctrl->hpc_reg + RESET_FREQ_MODE); |
936 | wake_up_interruptible(&ctrl->queue); |
937 | } |
938 | |
939 | if (schedule_flag) { |
940 | wake_up_process(tsk: cpqhp_event_thread); |
941 | dbg("Waking even thread" ); |
942 | } |
943 | return IRQ_HANDLED; |
944 | } |
945 | |
946 | |
947 | /** |
948 | * cpqhp_slot_create - Creates a node and adds it to the proper bus. |
949 | * @busnumber: bus where new node is to be located |
950 | * |
951 | * Returns pointer to the new node or %NULL if unsuccessful. |
952 | */ |
953 | struct pci_func *cpqhp_slot_create(u8 busnumber) |
954 | { |
955 | struct pci_func *new_slot; |
956 | struct pci_func *next; |
957 | |
958 | new_slot = kzalloc(size: sizeof(*new_slot), GFP_KERNEL); |
959 | if (new_slot == NULL) |
960 | return new_slot; |
961 | |
962 | new_slot->next = NULL; |
963 | new_slot->configured = 1; |
964 | |
965 | if (cpqhp_slot_list[busnumber] == NULL) { |
966 | cpqhp_slot_list[busnumber] = new_slot; |
967 | } else { |
968 | next = cpqhp_slot_list[busnumber]; |
969 | while (next->next != NULL) |
970 | next = next->next; |
971 | next->next = new_slot; |
972 | } |
973 | return new_slot; |
974 | } |
975 | |
976 | |
977 | /** |
978 | * slot_remove - Removes a node from the linked list of slots. |
979 | * @old_slot: slot to remove |
980 | * |
981 | * Returns %0 if successful, !0 otherwise. |
982 | */ |
983 | static int slot_remove(struct pci_func *old_slot) |
984 | { |
985 | struct pci_func *next; |
986 | |
987 | if (old_slot == NULL) |
988 | return 1; |
989 | |
990 | next = cpqhp_slot_list[old_slot->bus]; |
991 | if (next == NULL) |
992 | return 1; |
993 | |
994 | if (next == old_slot) { |
995 | cpqhp_slot_list[old_slot->bus] = old_slot->next; |
996 | cpqhp_destroy_board_resources(func: old_slot); |
997 | kfree(objp: old_slot); |
998 | return 0; |
999 | } |
1000 | |
1001 | while ((next->next != old_slot) && (next->next != NULL)) |
1002 | next = next->next; |
1003 | |
1004 | if (next->next == old_slot) { |
1005 | next->next = old_slot->next; |
1006 | cpqhp_destroy_board_resources(func: old_slot); |
1007 | kfree(objp: old_slot); |
1008 | return 0; |
1009 | } else |
1010 | return 2; |
1011 | } |
1012 | |
1013 | |
1014 | /** |
1015 | * bridge_slot_remove - Removes a node from the linked list of slots. |
1016 | * @bridge: bridge to remove |
1017 | * |
1018 | * Returns %0 if successful, !0 otherwise. |
1019 | */ |
1020 | static int bridge_slot_remove(struct pci_func *bridge) |
1021 | { |
1022 | u8 subordinateBus, secondaryBus; |
1023 | u8 tempBus; |
1024 | struct pci_func *next; |
1025 | |
1026 | secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF; |
1027 | subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF; |
1028 | |
1029 | for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { |
1030 | next = cpqhp_slot_list[tempBus]; |
1031 | |
1032 | while (!slot_remove(old_slot: next)) |
1033 | next = cpqhp_slot_list[tempBus]; |
1034 | } |
1035 | |
1036 | next = cpqhp_slot_list[bridge->bus]; |
1037 | |
1038 | if (next == NULL) |
1039 | return 1; |
1040 | |
1041 | if (next == bridge) { |
1042 | cpqhp_slot_list[bridge->bus] = bridge->next; |
1043 | goto out; |
1044 | } |
1045 | |
1046 | while ((next->next != bridge) && (next->next != NULL)) |
1047 | next = next->next; |
1048 | |
1049 | if (next->next != bridge) |
1050 | return 2; |
1051 | next->next = bridge->next; |
1052 | out: |
1053 | kfree(objp: bridge); |
1054 | return 0; |
1055 | } |
1056 | |
1057 | |
1058 | /** |
1059 | * cpqhp_slot_find - Looks for a node by bus, and device, multiple functions accessed |
1060 | * @bus: bus to find |
1061 | * @device: device to find |
1062 | * @index: is %0 for first function found, %1 for the second... |
1063 | * |
1064 | * Returns pointer to the node if successful, %NULL otherwise. |
1065 | */ |
1066 | struct pci_func *cpqhp_slot_find(u8 bus, u8 device, u8 index) |
1067 | { |
1068 | int found = -1; |
1069 | struct pci_func *func; |
1070 | |
1071 | func = cpqhp_slot_list[bus]; |
1072 | |
1073 | if ((func == NULL) || ((func->device == device) && (index == 0))) |
1074 | return func; |
1075 | |
1076 | if (func->device == device) |
1077 | found++; |
1078 | |
1079 | while (func->next != NULL) { |
1080 | func = func->next; |
1081 | |
1082 | if (func->device == device) |
1083 | found++; |
1084 | |
1085 | if (found == index) |
1086 | return func; |
1087 | } |
1088 | |
1089 | return NULL; |
1090 | } |
1091 | |
1092 | |
1093 | /* DJZ: I don't think is_bridge will work as is. |
1094 | * FIXME */ |
1095 | static int is_bridge(struct pci_func *func) |
1096 | { |
1097 | /* Check the header type */ |
1098 | if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01) |
1099 | return 1; |
1100 | else |
1101 | return 0; |
1102 | } |
1103 | |
1104 | |
1105 | /** |
1106 | * set_controller_speed - set the frequency and/or mode of a specific controller segment. |
1107 | * @ctrl: controller to change frequency/mode for. |
1108 | * @adapter_speed: the speed of the adapter we want to match. |
1109 | * @hp_slot: the slot number where the adapter is installed. |
1110 | * |
1111 | * Returns %0 if we successfully change frequency and/or mode to match the |
1112 | * adapter speed. |
1113 | */ |
1114 | static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot) |
1115 | { |
1116 | struct slot *slot; |
1117 | struct pci_bus *bus = ctrl->pci_bus; |
1118 | u8 reg; |
1119 | u8 slot_power = readb(addr: ctrl->hpc_reg + SLOT_POWER); |
1120 | u16 reg16; |
1121 | u32 leds = readl(addr: ctrl->hpc_reg + LED_CONTROL); |
1122 | |
1123 | if (bus->cur_bus_speed == adapter_speed) |
1124 | return 0; |
1125 | |
1126 | /* We don't allow freq/mode changes if we find another adapter running |
1127 | * in another slot on this controller |
1128 | */ |
1129 | for (slot = ctrl->slot; slot; slot = slot->next) { |
1130 | if (slot->device == (hp_slot + ctrl->slot_device_offset)) |
1131 | continue; |
1132 | if (get_presence_status(ctrl, slot) == 0) |
1133 | continue; |
1134 | /* If another adapter is running on the same segment but at a |
1135 | * lower speed/mode, we allow the new adapter to function at |
1136 | * this rate if supported |
1137 | */ |
1138 | if (bus->cur_bus_speed < adapter_speed) |
1139 | return 0; |
1140 | |
1141 | return 1; |
1142 | } |
1143 | |
1144 | /* If the controller doesn't support freq/mode changes and the |
1145 | * controller is running at a higher mode, we bail |
1146 | */ |
1147 | if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability)) |
1148 | return 1; |
1149 | |
1150 | /* But we allow the adapter to run at a lower rate if possible */ |
1151 | if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability)) |
1152 | return 0; |
1153 | |
1154 | /* We try to set the max speed supported by both the adapter and |
1155 | * controller |
1156 | */ |
1157 | if (bus->max_bus_speed < adapter_speed) { |
1158 | if (bus->cur_bus_speed == bus->max_bus_speed) |
1159 | return 0; |
1160 | adapter_speed = bus->max_bus_speed; |
1161 | } |
1162 | |
1163 | writel(val: 0x0L, addr: ctrl->hpc_reg + LED_CONTROL); |
1164 | writeb(val: 0x00, addr: ctrl->hpc_reg + SLOT_ENABLE); |
1165 | |
1166 | set_SOGO(ctrl); |
1167 | wait_for_ctrl_irq(ctrl); |
1168 | |
1169 | if (adapter_speed != PCI_SPEED_133MHz_PCIX) |
1170 | reg = 0xF5; |
1171 | else |
1172 | reg = 0xF4; |
1173 | pci_write_config_byte(dev: ctrl->pci_dev, where: 0x41, val: reg); |
1174 | |
1175 | reg16 = readw(addr: ctrl->hpc_reg + NEXT_CURR_FREQ); |
1176 | reg16 &= ~0x000F; |
1177 | switch (adapter_speed) { |
1178 | case(PCI_SPEED_133MHz_PCIX): |
1179 | reg = 0x75; |
1180 | reg16 |= 0xB; |
1181 | break; |
1182 | case(PCI_SPEED_100MHz_PCIX): |
1183 | reg = 0x74; |
1184 | reg16 |= 0xA; |
1185 | break; |
1186 | case(PCI_SPEED_66MHz_PCIX): |
1187 | reg = 0x73; |
1188 | reg16 |= 0x9; |
1189 | break; |
1190 | case(PCI_SPEED_66MHz): |
1191 | reg = 0x73; |
1192 | reg16 |= 0x1; |
1193 | break; |
1194 | default: /* 33MHz PCI 2.2 */ |
1195 | reg = 0x71; |
1196 | break; |
1197 | |
1198 | } |
1199 | reg16 |= 0xB << 12; |
1200 | writew(val: reg16, addr: ctrl->hpc_reg + NEXT_CURR_FREQ); |
1201 | |
1202 | mdelay(5); |
1203 | |
1204 | /* Re-enable interrupts */ |
1205 | writel(val: 0, addr: ctrl->hpc_reg + INT_MASK); |
1206 | |
1207 | pci_write_config_byte(dev: ctrl->pci_dev, where: 0x41, val: reg); |
1208 | |
1209 | /* Restart state machine */ |
1210 | reg = ~0xF; |
1211 | pci_read_config_byte(dev: ctrl->pci_dev, where: 0x43, val: ®); |
1212 | pci_write_config_byte(dev: ctrl->pci_dev, where: 0x43, val: reg); |
1213 | |
1214 | /* Only if mode change...*/ |
1215 | if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || |
1216 | ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) |
1217 | set_SOGO(ctrl); |
1218 | |
1219 | wait_for_ctrl_irq(ctrl); |
1220 | mdelay(1100); |
1221 | |
1222 | /* Restore LED/Slot state */ |
1223 | writel(val: leds, addr: ctrl->hpc_reg + LED_CONTROL); |
1224 | writeb(val: slot_power, addr: ctrl->hpc_reg + SLOT_ENABLE); |
1225 | |
1226 | set_SOGO(ctrl); |
1227 | wait_for_ctrl_irq(ctrl); |
1228 | |
1229 | bus->cur_bus_speed = adapter_speed; |
1230 | slot = cpqhp_find_slot(ctrl, device: hp_slot + ctrl->slot_device_offset); |
1231 | |
1232 | info("Successfully changed frequency/mode for adapter in slot %d\n" , |
1233 | slot->number); |
1234 | return 0; |
1235 | } |
1236 | |
1237 | /* the following routines constitute the bulk of the |
1238 | * hotplug controller logic |
1239 | */ |
1240 | |
1241 | |
1242 | /** |
1243 | * board_replaced - Called after a board has been replaced in the system. |
1244 | * @func: PCI device/function information |
1245 | * @ctrl: hotplug controller |
1246 | * |
1247 | * This is only used if we don't have resources for hot add. |
1248 | * Turns power on for the board. |
1249 | * Checks to see if board is the same. |
1250 | * If board is same, reconfigures it. |
1251 | * If board isn't same, turns it back off. |
1252 | */ |
1253 | static u32 board_replaced(struct pci_func *func, struct controller *ctrl) |
1254 | { |
1255 | struct pci_bus *bus = ctrl->pci_bus; |
1256 | u8 hp_slot; |
1257 | u8 temp_byte; |
1258 | u8 adapter_speed; |
1259 | u32 rc = 0; |
1260 | |
1261 | hp_slot = func->device - ctrl->slot_device_offset; |
1262 | |
1263 | /* |
1264 | * The switch is open. |
1265 | */ |
1266 | if (readl(addr: ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) |
1267 | rc = INTERLOCK_OPEN; |
1268 | /* |
1269 | * The board is already on |
1270 | */ |
1271 | else if (is_slot_enabled(ctrl, slot: hp_slot)) |
1272 | rc = CARD_FUNCTIONING; |
1273 | else { |
1274 | mutex_lock(&ctrl->crit_sect); |
1275 | |
1276 | /* turn on board without attaching to the bus */ |
1277 | enable_slot_power(ctrl, slot: hp_slot); |
1278 | |
1279 | set_SOGO(ctrl); |
1280 | |
1281 | /* Wait for SOBS to be unset */ |
1282 | wait_for_ctrl_irq(ctrl); |
1283 | |
1284 | /* Change bits in slot power register to force another shift out |
1285 | * NOTE: this is to work around the timer bug */ |
1286 | temp_byte = readb(addr: ctrl->hpc_reg + SLOT_POWER); |
1287 | writeb(val: 0x00, addr: ctrl->hpc_reg + SLOT_POWER); |
1288 | writeb(val: temp_byte, addr: ctrl->hpc_reg + SLOT_POWER); |
1289 | |
1290 | set_SOGO(ctrl); |
1291 | |
1292 | /* Wait for SOBS to be unset */ |
1293 | wait_for_ctrl_irq(ctrl); |
1294 | |
1295 | adapter_speed = get_adapter_speed(ctrl, hp_slot); |
1296 | if (bus->cur_bus_speed != adapter_speed) |
1297 | if (set_controller_speed(ctrl, adapter_speed, hp_slot)) |
1298 | rc = WRONG_BUS_FREQUENCY; |
1299 | |
1300 | /* turn off board without attaching to the bus */ |
1301 | disable_slot_power(ctrl, slot: hp_slot); |
1302 | |
1303 | set_SOGO(ctrl); |
1304 | |
1305 | /* Wait for SOBS to be unset */ |
1306 | wait_for_ctrl_irq(ctrl); |
1307 | |
1308 | mutex_unlock(lock: &ctrl->crit_sect); |
1309 | |
1310 | if (rc) |
1311 | return rc; |
1312 | |
1313 | mutex_lock(&ctrl->crit_sect); |
1314 | |
1315 | slot_enable(ctrl, slot: hp_slot); |
1316 | green_LED_blink(ctrl, slot: hp_slot); |
1317 | |
1318 | amber_LED_off(ctrl, slot: hp_slot); |
1319 | |
1320 | set_SOGO(ctrl); |
1321 | |
1322 | /* Wait for SOBS to be unset */ |
1323 | wait_for_ctrl_irq(ctrl); |
1324 | |
1325 | mutex_unlock(lock: &ctrl->crit_sect); |
1326 | |
1327 | /* Wait for ~1 second because of hot plug spec */ |
1328 | long_delay(delay: 1*HZ); |
1329 | |
1330 | /* Check for a power fault */ |
1331 | if (func->status == 0xFF) { |
1332 | /* power fault occurred, but it was benign */ |
1333 | rc = POWER_FAILURE; |
1334 | func->status = 0; |
1335 | } else |
1336 | rc = cpqhp_valid_replace(ctrl, func); |
1337 | |
1338 | if (!rc) { |
1339 | /* It must be the same board */ |
1340 | |
1341 | rc = cpqhp_configure_board(ctrl, func); |
1342 | |
1343 | /* If configuration fails, turn it off |
1344 | * Get slot won't work for devices behind |
1345 | * bridges, but in this case it will always be |
1346 | * called for the "base" bus/dev/func of an |
1347 | * adapter. |
1348 | */ |
1349 | |
1350 | mutex_lock(&ctrl->crit_sect); |
1351 | |
1352 | amber_LED_on(ctrl, slot: hp_slot); |
1353 | green_LED_off(ctrl, slot: hp_slot); |
1354 | slot_disable(ctrl, slot: hp_slot); |
1355 | |
1356 | set_SOGO(ctrl); |
1357 | |
1358 | /* Wait for SOBS to be unset */ |
1359 | wait_for_ctrl_irq(ctrl); |
1360 | |
1361 | mutex_unlock(lock: &ctrl->crit_sect); |
1362 | |
1363 | if (rc) |
1364 | return rc; |
1365 | else |
1366 | return 1; |
1367 | |
1368 | } else { |
1369 | /* Something is wrong |
1370 | |
1371 | * Get slot won't work for devices behind bridges, but |
1372 | * in this case it will always be called for the "base" |
1373 | * bus/dev/func of an adapter. |
1374 | */ |
1375 | |
1376 | mutex_lock(&ctrl->crit_sect); |
1377 | |
1378 | amber_LED_on(ctrl, slot: hp_slot); |
1379 | green_LED_off(ctrl, slot: hp_slot); |
1380 | slot_disable(ctrl, slot: hp_slot); |
1381 | |
1382 | set_SOGO(ctrl); |
1383 | |
1384 | /* Wait for SOBS to be unset */ |
1385 | wait_for_ctrl_irq(ctrl); |
1386 | |
1387 | mutex_unlock(lock: &ctrl->crit_sect); |
1388 | } |
1389 | |
1390 | } |
1391 | return rc; |
1392 | |
1393 | } |
1394 | |
1395 | |
1396 | /** |
1397 | * board_added - Called after a board has been added to the system. |
1398 | * @func: PCI device/function info |
1399 | * @ctrl: hotplug controller |
1400 | * |
1401 | * Turns power on for the board. |
1402 | * Configures board. |
1403 | */ |
1404 | static u32 board_added(struct pci_func *func, struct controller *ctrl) |
1405 | { |
1406 | u8 hp_slot; |
1407 | u8 temp_byte; |
1408 | u8 adapter_speed; |
1409 | int index; |
1410 | u32 temp_register = 0xFFFFFFFF; |
1411 | u32 rc = 0; |
1412 | struct pci_func *new_slot = NULL; |
1413 | struct pci_bus *bus = ctrl->pci_bus; |
1414 | struct resource_lists res_lists; |
1415 | |
1416 | hp_slot = func->device - ctrl->slot_device_offset; |
1417 | dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n" , |
1418 | __func__, func->device, ctrl->slot_device_offset, hp_slot); |
1419 | |
1420 | mutex_lock(&ctrl->crit_sect); |
1421 | |
1422 | /* turn on board without attaching to the bus */ |
1423 | enable_slot_power(ctrl, slot: hp_slot); |
1424 | |
1425 | set_SOGO(ctrl); |
1426 | |
1427 | /* Wait for SOBS to be unset */ |
1428 | wait_for_ctrl_irq(ctrl); |
1429 | |
1430 | /* Change bits in slot power register to force another shift out |
1431 | * NOTE: this is to work around the timer bug |
1432 | */ |
1433 | temp_byte = readb(addr: ctrl->hpc_reg + SLOT_POWER); |
1434 | writeb(val: 0x00, addr: ctrl->hpc_reg + SLOT_POWER); |
1435 | writeb(val: temp_byte, addr: ctrl->hpc_reg + SLOT_POWER); |
1436 | |
1437 | set_SOGO(ctrl); |
1438 | |
1439 | /* Wait for SOBS to be unset */ |
1440 | wait_for_ctrl_irq(ctrl); |
1441 | |
1442 | adapter_speed = get_adapter_speed(ctrl, hp_slot); |
1443 | if (bus->cur_bus_speed != adapter_speed) |
1444 | if (set_controller_speed(ctrl, adapter_speed, hp_slot)) |
1445 | rc = WRONG_BUS_FREQUENCY; |
1446 | |
1447 | /* turn off board without attaching to the bus */ |
1448 | disable_slot_power(ctrl, slot: hp_slot); |
1449 | |
1450 | set_SOGO(ctrl); |
1451 | |
1452 | /* Wait for SOBS to be unset */ |
1453 | wait_for_ctrl_irq(ctrl); |
1454 | |
1455 | mutex_unlock(lock: &ctrl->crit_sect); |
1456 | |
1457 | if (rc) |
1458 | return rc; |
1459 | |
1460 | cpqhp_find_slot(ctrl, device: hp_slot + ctrl->slot_device_offset); |
1461 | |
1462 | /* turn on board and blink green LED */ |
1463 | |
1464 | dbg("%s: before down\n" , __func__); |
1465 | mutex_lock(&ctrl->crit_sect); |
1466 | dbg("%s: after down\n" , __func__); |
1467 | |
1468 | dbg("%s: before slot_enable\n" , __func__); |
1469 | slot_enable(ctrl, slot: hp_slot); |
1470 | |
1471 | dbg("%s: before green_LED_blink\n" , __func__); |
1472 | green_LED_blink(ctrl, slot: hp_slot); |
1473 | |
1474 | dbg("%s: before amber_LED_blink\n" , __func__); |
1475 | amber_LED_off(ctrl, slot: hp_slot); |
1476 | |
1477 | dbg("%s: before set_SOGO\n" , __func__); |
1478 | set_SOGO(ctrl); |
1479 | |
1480 | /* Wait for SOBS to be unset */ |
1481 | dbg("%s: before wait_for_ctrl_irq\n" , __func__); |
1482 | wait_for_ctrl_irq(ctrl); |
1483 | dbg("%s: after wait_for_ctrl_irq\n" , __func__); |
1484 | |
1485 | dbg("%s: before up\n" , __func__); |
1486 | mutex_unlock(lock: &ctrl->crit_sect); |
1487 | dbg("%s: after up\n" , __func__); |
1488 | |
1489 | /* Wait for ~1 second because of hot plug spec */ |
1490 | dbg("%s: before long_delay\n" , __func__); |
1491 | long_delay(delay: 1*HZ); |
1492 | dbg("%s: after long_delay\n" , __func__); |
1493 | |
1494 | dbg("%s: func status = %x\n" , __func__, func->status); |
1495 | /* Check for a power fault */ |
1496 | if (func->status == 0xFF) { |
1497 | /* power fault occurred, but it was benign */ |
1498 | temp_register = 0xFFFFFFFF; |
1499 | dbg("%s: temp register set to %x by power fault\n" , __func__, temp_register); |
1500 | rc = POWER_FAILURE; |
1501 | func->status = 0; |
1502 | } else { |
1503 | /* Get vendor/device ID u32 */ |
1504 | ctrl->pci_bus->number = func->bus; |
1505 | rc = pci_bus_read_config_dword(bus: ctrl->pci_bus, PCI_DEVFN(func->device, func->function), PCI_VENDOR_ID, val: &temp_register); |
1506 | dbg("%s: pci_read_config_dword returns %d\n" , __func__, rc); |
1507 | dbg("%s: temp_register is %x\n" , __func__, temp_register); |
1508 | |
1509 | if (rc != 0) { |
1510 | /* Something's wrong here */ |
1511 | temp_register = 0xFFFFFFFF; |
1512 | dbg("%s: temp register set to %x by error\n" , __func__, temp_register); |
1513 | } |
1514 | /* Preset return code. It will be changed later if things go okay. */ |
1515 | rc = NO_ADAPTER_PRESENT; |
1516 | } |
1517 | |
1518 | /* All F's is an empty slot or an invalid board */ |
1519 | if (temp_register != 0xFFFFFFFF) { |
1520 | res_lists.io_head = ctrl->io_head; |
1521 | res_lists.mem_head = ctrl->mem_head; |
1522 | res_lists.p_mem_head = ctrl->p_mem_head; |
1523 | res_lists.bus_head = ctrl->bus_head; |
1524 | res_lists.irqs = NULL; |
1525 | |
1526 | rc = configure_new_device(ctrl, func, behind_bridge: 0, resources: &res_lists); |
1527 | |
1528 | dbg("%s: back from configure_new_device\n" , __func__); |
1529 | ctrl->io_head = res_lists.io_head; |
1530 | ctrl->mem_head = res_lists.mem_head; |
1531 | ctrl->p_mem_head = res_lists.p_mem_head; |
1532 | ctrl->bus_head = res_lists.bus_head; |
1533 | |
1534 | cpqhp_resource_sort_and_combine(head: &(ctrl->mem_head)); |
1535 | cpqhp_resource_sort_and_combine(head: &(ctrl->p_mem_head)); |
1536 | cpqhp_resource_sort_and_combine(head: &(ctrl->io_head)); |
1537 | cpqhp_resource_sort_and_combine(head: &(ctrl->bus_head)); |
1538 | |
1539 | if (rc) { |
1540 | mutex_lock(&ctrl->crit_sect); |
1541 | |
1542 | amber_LED_on(ctrl, slot: hp_slot); |
1543 | green_LED_off(ctrl, slot: hp_slot); |
1544 | slot_disable(ctrl, slot: hp_slot); |
1545 | |
1546 | set_SOGO(ctrl); |
1547 | |
1548 | /* Wait for SOBS to be unset */ |
1549 | wait_for_ctrl_irq(ctrl); |
1550 | |
1551 | mutex_unlock(lock: &ctrl->crit_sect); |
1552 | return rc; |
1553 | } else { |
1554 | cpqhp_save_slot_config(ctrl, new_slot: func); |
1555 | } |
1556 | |
1557 | |
1558 | func->status = 0; |
1559 | func->switch_save = 0x10; |
1560 | func->is_a_board = 0x01; |
1561 | |
1562 | /* next, we will instantiate the linux pci_dev structures (with |
1563 | * appropriate driver notification, if already present) */ |
1564 | dbg("%s: configure linux pci_dev structure\n" , __func__); |
1565 | index = 0; |
1566 | do { |
1567 | new_slot = cpqhp_slot_find(bus: ctrl->bus, device: func->device, index: index++); |
1568 | if (new_slot && !new_slot->pci_dev) |
1569 | cpqhp_configure_device(ctrl, func: new_slot); |
1570 | } while (new_slot); |
1571 | |
1572 | mutex_lock(&ctrl->crit_sect); |
1573 | |
1574 | green_LED_on(ctrl, slot: hp_slot); |
1575 | |
1576 | set_SOGO(ctrl); |
1577 | |
1578 | /* Wait for SOBS to be unset */ |
1579 | wait_for_ctrl_irq(ctrl); |
1580 | |
1581 | mutex_unlock(lock: &ctrl->crit_sect); |
1582 | } else { |
1583 | mutex_lock(&ctrl->crit_sect); |
1584 | |
1585 | amber_LED_on(ctrl, slot: hp_slot); |
1586 | green_LED_off(ctrl, slot: hp_slot); |
1587 | slot_disable(ctrl, slot: hp_slot); |
1588 | |
1589 | set_SOGO(ctrl); |
1590 | |
1591 | /* Wait for SOBS to be unset */ |
1592 | wait_for_ctrl_irq(ctrl); |
1593 | |
1594 | mutex_unlock(lock: &ctrl->crit_sect); |
1595 | |
1596 | return rc; |
1597 | } |
1598 | return 0; |
1599 | } |
1600 | |
1601 | |
1602 | /** |
1603 | * remove_board - Turns off slot and LEDs |
1604 | * @func: PCI device/function info |
1605 | * @replace_flag: whether replacing or adding a new device |
1606 | * @ctrl: target controller |
1607 | */ |
1608 | static u32 remove_board(struct pci_func *func, u32 replace_flag, struct controller *ctrl) |
1609 | { |
1610 | int index; |
1611 | u8 skip = 0; |
1612 | u8 device; |
1613 | u8 hp_slot; |
1614 | u8 temp_byte; |
1615 | struct resource_lists res_lists; |
1616 | struct pci_func *temp_func; |
1617 | |
1618 | if (cpqhp_unconfigure_device(func)) |
1619 | return 1; |
1620 | |
1621 | device = func->device; |
1622 | |
1623 | hp_slot = func->device - ctrl->slot_device_offset; |
1624 | dbg("In %s, hp_slot = %d\n" , __func__, hp_slot); |
1625 | |
1626 | /* When we get here, it is safe to change base address registers. |
1627 | * We will attempt to save the base address register lengths */ |
1628 | if (replace_flag || !ctrl->add_support) |
1629 | cpqhp_save_base_addr_length(ctrl, func); |
1630 | else if (!func->bus_head && !func->mem_head && |
1631 | !func->p_mem_head && !func->io_head) { |
1632 | /* Here we check to see if we've saved any of the board's |
1633 | * resources already. If so, we'll skip the attempt to |
1634 | * determine what's being used. */ |
1635 | index = 0; |
1636 | temp_func = cpqhp_slot_find(bus: func->bus, device: func->device, index: index++); |
1637 | while (temp_func) { |
1638 | if (temp_func->bus_head || temp_func->mem_head |
1639 | || temp_func->p_mem_head || temp_func->io_head) { |
1640 | skip = 1; |
1641 | break; |
1642 | } |
1643 | temp_func = cpqhp_slot_find(bus: temp_func->bus, device: temp_func->device, index: index++); |
1644 | } |
1645 | |
1646 | if (!skip) |
1647 | cpqhp_save_used_resources(ctrl, func); |
1648 | } |
1649 | /* Change status to shutdown */ |
1650 | if (func->is_a_board) |
1651 | func->status = 0x01; |
1652 | func->configured = 0; |
1653 | |
1654 | mutex_lock(&ctrl->crit_sect); |
1655 | |
1656 | green_LED_off(ctrl, slot: hp_slot); |
1657 | slot_disable(ctrl, slot: hp_slot); |
1658 | |
1659 | set_SOGO(ctrl); |
1660 | |
1661 | /* turn off SERR for slot */ |
1662 | temp_byte = readb(addr: ctrl->hpc_reg + SLOT_SERR); |
1663 | temp_byte &= ~(0x01 << hp_slot); |
1664 | writeb(val: temp_byte, addr: ctrl->hpc_reg + SLOT_SERR); |
1665 | |
1666 | /* Wait for SOBS to be unset */ |
1667 | wait_for_ctrl_irq(ctrl); |
1668 | |
1669 | mutex_unlock(lock: &ctrl->crit_sect); |
1670 | |
1671 | if (!replace_flag && ctrl->add_support) { |
1672 | while (func) { |
1673 | res_lists.io_head = ctrl->io_head; |
1674 | res_lists.mem_head = ctrl->mem_head; |
1675 | res_lists.p_mem_head = ctrl->p_mem_head; |
1676 | res_lists.bus_head = ctrl->bus_head; |
1677 | |
1678 | cpqhp_return_board_resources(func, resources: &res_lists); |
1679 | |
1680 | ctrl->io_head = res_lists.io_head; |
1681 | ctrl->mem_head = res_lists.mem_head; |
1682 | ctrl->p_mem_head = res_lists.p_mem_head; |
1683 | ctrl->bus_head = res_lists.bus_head; |
1684 | |
1685 | cpqhp_resource_sort_and_combine(head: &(ctrl->mem_head)); |
1686 | cpqhp_resource_sort_and_combine(head: &(ctrl->p_mem_head)); |
1687 | cpqhp_resource_sort_and_combine(head: &(ctrl->io_head)); |
1688 | cpqhp_resource_sort_and_combine(head: &(ctrl->bus_head)); |
1689 | |
1690 | if (is_bridge(func)) { |
1691 | bridge_slot_remove(bridge: func); |
1692 | } else |
1693 | slot_remove(old_slot: func); |
1694 | |
1695 | func = cpqhp_slot_find(bus: ctrl->bus, device, index: 0); |
1696 | } |
1697 | |
1698 | /* Setup slot structure with entry for empty slot */ |
1699 | func = cpqhp_slot_create(busnumber: ctrl->bus); |
1700 | |
1701 | if (func == NULL) |
1702 | return 1; |
1703 | |
1704 | func->bus = ctrl->bus; |
1705 | func->device = device; |
1706 | func->function = 0; |
1707 | func->configured = 0; |
1708 | func->switch_save = 0x10; |
1709 | func->is_a_board = 0; |
1710 | func->p_task_event = NULL; |
1711 | } |
1712 | |
1713 | return 0; |
1714 | } |
1715 | |
1716 | static void pushbutton_helper_thread(struct timer_list *t) |
1717 | { |
1718 | pushbutton_pending = t; |
1719 | |
1720 | wake_up_process(tsk: cpqhp_event_thread); |
1721 | } |
1722 | |
1723 | |
1724 | /* this is the main worker thread */ |
1725 | static int event_thread(void *data) |
1726 | { |
1727 | struct controller *ctrl; |
1728 | |
1729 | while (1) { |
1730 | dbg("!!!!event_thread sleeping\n" ); |
1731 | set_current_state(TASK_INTERRUPTIBLE); |
1732 | schedule(); |
1733 | |
1734 | if (kthread_should_stop()) |
1735 | break; |
1736 | /* Do stuff here */ |
1737 | if (pushbutton_pending) |
1738 | cpqhp_pushbutton_thread(t: pushbutton_pending); |
1739 | else |
1740 | for (ctrl = cpqhp_ctrl_list; ctrl; ctrl = ctrl->next) |
1741 | interrupt_event_handler(ctrl); |
1742 | } |
1743 | dbg("event_thread signals exit\n" ); |
1744 | return 0; |
1745 | } |
1746 | |
1747 | int cpqhp_event_start_thread(void) |
1748 | { |
1749 | cpqhp_event_thread = kthread_run(event_thread, NULL, "phpd_event" ); |
1750 | if (IS_ERR(ptr: cpqhp_event_thread)) { |
1751 | err("Can't start up our event thread\n" ); |
1752 | return PTR_ERR(ptr: cpqhp_event_thread); |
1753 | } |
1754 | |
1755 | return 0; |
1756 | } |
1757 | |
1758 | |
1759 | void cpqhp_event_stop_thread(void) |
1760 | { |
1761 | kthread_stop(k: cpqhp_event_thread); |
1762 | } |
1763 | |
1764 | |
1765 | static void interrupt_event_handler(struct controller *ctrl) |
1766 | { |
1767 | int loop; |
1768 | int change = 1; |
1769 | struct pci_func *func; |
1770 | u8 hp_slot; |
1771 | struct slot *p_slot; |
1772 | |
1773 | while (change) { |
1774 | change = 0; |
1775 | |
1776 | for (loop = 0; loop < 10; loop++) { |
1777 | /* dbg("loop %d\n", loop); */ |
1778 | if (ctrl->event_queue[loop].event_type != 0) { |
1779 | hp_slot = ctrl->event_queue[loop].hp_slot; |
1780 | |
1781 | func = cpqhp_slot_find(bus: ctrl->bus, device: (hp_slot + ctrl->slot_device_offset), index: 0); |
1782 | if (!func) |
1783 | return; |
1784 | |
1785 | p_slot = cpqhp_find_slot(ctrl, device: hp_slot + ctrl->slot_device_offset); |
1786 | if (!p_slot) |
1787 | return; |
1788 | |
1789 | dbg("hp_slot %d, func %p, p_slot %p\n" , |
1790 | hp_slot, func, p_slot); |
1791 | |
1792 | if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) { |
1793 | dbg("button pressed\n" ); |
1794 | } else if (ctrl->event_queue[loop].event_type == |
1795 | INT_BUTTON_CANCEL) { |
1796 | dbg("button cancel\n" ); |
1797 | del_timer(timer: &p_slot->task_event); |
1798 | |
1799 | mutex_lock(&ctrl->crit_sect); |
1800 | |
1801 | if (p_slot->state == BLINKINGOFF_STATE) { |
1802 | /* slot is on */ |
1803 | dbg("turn on green LED\n" ); |
1804 | green_LED_on(ctrl, slot: hp_slot); |
1805 | } else if (p_slot->state == BLINKINGON_STATE) { |
1806 | /* slot is off */ |
1807 | dbg("turn off green LED\n" ); |
1808 | green_LED_off(ctrl, slot: hp_slot); |
1809 | } |
1810 | |
1811 | info(msg_button_cancel, p_slot->number); |
1812 | |
1813 | p_slot->state = STATIC_STATE; |
1814 | |
1815 | amber_LED_off(ctrl, slot: hp_slot); |
1816 | |
1817 | set_SOGO(ctrl); |
1818 | |
1819 | /* Wait for SOBS to be unset */ |
1820 | wait_for_ctrl_irq(ctrl); |
1821 | |
1822 | mutex_unlock(lock: &ctrl->crit_sect); |
1823 | } |
1824 | /*** button Released (No action on press...) */ |
1825 | else if (ctrl->event_queue[loop].event_type == INT_BUTTON_RELEASE) { |
1826 | dbg("button release\n" ); |
1827 | |
1828 | if (is_slot_enabled(ctrl, slot: hp_slot)) { |
1829 | dbg("slot is on\n" ); |
1830 | p_slot->state = BLINKINGOFF_STATE; |
1831 | info(msg_button_off, p_slot->number); |
1832 | } else { |
1833 | dbg("slot is off\n" ); |
1834 | p_slot->state = BLINKINGON_STATE; |
1835 | info(msg_button_on, p_slot->number); |
1836 | } |
1837 | mutex_lock(&ctrl->crit_sect); |
1838 | |
1839 | dbg("blink green LED and turn off amber\n" ); |
1840 | |
1841 | amber_LED_off(ctrl, slot: hp_slot); |
1842 | green_LED_blink(ctrl, slot: hp_slot); |
1843 | |
1844 | set_SOGO(ctrl); |
1845 | |
1846 | /* Wait for SOBS to be unset */ |
1847 | wait_for_ctrl_irq(ctrl); |
1848 | |
1849 | mutex_unlock(lock: &ctrl->crit_sect); |
1850 | timer_setup(&p_slot->task_event, |
1851 | pushbutton_helper_thread, |
1852 | 0); |
1853 | p_slot->hp_slot = hp_slot; |
1854 | p_slot->ctrl = ctrl; |
1855 | /* p_slot->physical_slot = physical_slot; */ |
1856 | p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */ |
1857 | |
1858 | dbg("add_timer p_slot = %p\n" , p_slot); |
1859 | add_timer(timer: &p_slot->task_event); |
1860 | } |
1861 | /***********POWER FAULT */ |
1862 | else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) { |
1863 | dbg("power fault\n" ); |
1864 | } |
1865 | |
1866 | ctrl->event_queue[loop].event_type = 0; |
1867 | |
1868 | change = 1; |
1869 | } |
1870 | } /* End of FOR loop */ |
1871 | } |
1872 | } |
1873 | |
1874 | |
1875 | /** |
1876 | * cpqhp_pushbutton_thread - handle pushbutton events |
1877 | * @t: pointer to struct timer_list which holds all timer-related callbacks |
1878 | * |
1879 | * Scheduled procedure to handle blocking stuff for the pushbuttons. |
1880 | * Handles all pending events and exits. |
1881 | */ |
1882 | void cpqhp_pushbutton_thread(struct timer_list *t) |
1883 | { |
1884 | u8 hp_slot; |
1885 | struct pci_func *func; |
1886 | struct slot *p_slot = from_timer(p_slot, t, task_event); |
1887 | struct controller *ctrl = (struct controller *) p_slot->ctrl; |
1888 | |
1889 | pushbutton_pending = NULL; |
1890 | hp_slot = p_slot->hp_slot; |
1891 | |
1892 | if (is_slot_enabled(ctrl, slot: hp_slot)) { |
1893 | p_slot->state = POWEROFF_STATE; |
1894 | /* power Down board */ |
1895 | func = cpqhp_slot_find(bus: p_slot->bus, device: p_slot->device, index: 0); |
1896 | dbg("In power_down_board, func = %p, ctrl = %p\n" , func, ctrl); |
1897 | if (!func) { |
1898 | dbg("Error! func NULL in %s\n" , __func__); |
1899 | return; |
1900 | } |
1901 | |
1902 | if (cpqhp_process_SS(ctrl, func) != 0) { |
1903 | amber_LED_on(ctrl, slot: hp_slot); |
1904 | green_LED_on(ctrl, slot: hp_slot); |
1905 | |
1906 | set_SOGO(ctrl); |
1907 | |
1908 | /* Wait for SOBS to be unset */ |
1909 | wait_for_ctrl_irq(ctrl); |
1910 | } |
1911 | |
1912 | p_slot->state = STATIC_STATE; |
1913 | } else { |
1914 | p_slot->state = POWERON_STATE; |
1915 | /* slot is off */ |
1916 | |
1917 | func = cpqhp_slot_find(bus: p_slot->bus, device: p_slot->device, index: 0); |
1918 | dbg("In add_board, func = %p, ctrl = %p\n" , func, ctrl); |
1919 | if (!func) { |
1920 | dbg("Error! func NULL in %s\n" , __func__); |
1921 | return; |
1922 | } |
1923 | |
1924 | if (ctrl != NULL) { |
1925 | if (cpqhp_process_SI(ctrl, func) != 0) { |
1926 | amber_LED_on(ctrl, slot: hp_slot); |
1927 | green_LED_off(ctrl, slot: hp_slot); |
1928 | |
1929 | set_SOGO(ctrl); |
1930 | |
1931 | /* Wait for SOBS to be unset */ |
1932 | wait_for_ctrl_irq(ctrl); |
1933 | } |
1934 | } |
1935 | |
1936 | p_slot->state = STATIC_STATE; |
1937 | } |
1938 | } |
1939 | |
1940 | |
1941 | int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func) |
1942 | { |
1943 | u8 device, hp_slot; |
1944 | u16 temp_word; |
1945 | u32 tempdword; |
1946 | int rc; |
1947 | struct slot *p_slot; |
1948 | |
1949 | tempdword = 0; |
1950 | |
1951 | device = func->device; |
1952 | hp_slot = device - ctrl->slot_device_offset; |
1953 | p_slot = cpqhp_find_slot(ctrl, device); |
1954 | |
1955 | /* Check to see if the interlock is closed */ |
1956 | tempdword = readl(addr: ctrl->hpc_reg + INT_INPUT_CLEAR); |
1957 | |
1958 | if (tempdword & (0x01 << hp_slot)) |
1959 | return 1; |
1960 | |
1961 | if (func->is_a_board) { |
1962 | rc = board_replaced(func, ctrl); |
1963 | } else { |
1964 | /* add board */ |
1965 | slot_remove(old_slot: func); |
1966 | |
1967 | func = cpqhp_slot_create(busnumber: ctrl->bus); |
1968 | if (func == NULL) |
1969 | return 1; |
1970 | |
1971 | func->bus = ctrl->bus; |
1972 | func->device = device; |
1973 | func->function = 0; |
1974 | func->configured = 0; |
1975 | func->is_a_board = 1; |
1976 | |
1977 | /* We have to save the presence info for these slots */ |
1978 | temp_word = ctrl->ctrl_int_comp >> 16; |
1979 | func->presence_save = (temp_word >> hp_slot) & 0x01; |
1980 | func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; |
1981 | |
1982 | if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) { |
1983 | func->switch_save = 0; |
1984 | } else { |
1985 | func->switch_save = 0x10; |
1986 | } |
1987 | |
1988 | rc = board_added(func, ctrl); |
1989 | if (rc) { |
1990 | if (is_bridge(func)) { |
1991 | bridge_slot_remove(bridge: func); |
1992 | } else |
1993 | slot_remove(old_slot: func); |
1994 | |
1995 | /* Setup slot structure with entry for empty slot */ |
1996 | func = cpqhp_slot_create(busnumber: ctrl->bus); |
1997 | |
1998 | if (func == NULL) |
1999 | return 1; |
2000 | |
2001 | func->bus = ctrl->bus; |
2002 | func->device = device; |
2003 | func->function = 0; |
2004 | func->configured = 0; |
2005 | func->is_a_board = 0; |
2006 | |
2007 | /* We have to save the presence info for these slots */ |
2008 | temp_word = ctrl->ctrl_int_comp >> 16; |
2009 | func->presence_save = (temp_word >> hp_slot) & 0x01; |
2010 | func->presence_save |= |
2011 | (temp_word >> (hp_slot + 7)) & 0x02; |
2012 | |
2013 | if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) { |
2014 | func->switch_save = 0; |
2015 | } else { |
2016 | func->switch_save = 0x10; |
2017 | } |
2018 | } |
2019 | } |
2020 | |
2021 | if (rc) |
2022 | dbg("%s: rc = %d\n" , __func__, rc); |
2023 | |
2024 | return rc; |
2025 | } |
2026 | |
2027 | |
2028 | int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func) |
2029 | { |
2030 | u8 device, class_code, , BCR; |
2031 | u8 index = 0; |
2032 | u8 replace_flag; |
2033 | u32 rc = 0; |
2034 | unsigned int devfn; |
2035 | struct slot *p_slot; |
2036 | struct pci_bus *pci_bus = ctrl->pci_bus; |
2037 | |
2038 | device = func->device; |
2039 | func = cpqhp_slot_find(bus: ctrl->bus, device, index: index++); |
2040 | p_slot = cpqhp_find_slot(ctrl, device); |
2041 | |
2042 | /* Make sure there are no video controllers here */ |
2043 | while (func && !rc) { |
2044 | pci_bus->number = func->bus; |
2045 | devfn = PCI_DEVFN(func->device, func->function); |
2046 | |
2047 | /* Check the Class Code */ |
2048 | rc = pci_bus_read_config_byte(bus: pci_bus, devfn, where: 0x0B, val: &class_code); |
2049 | if (rc) |
2050 | return rc; |
2051 | |
2052 | if (class_code == PCI_BASE_CLASS_DISPLAY) { |
2053 | /* Display/Video adapter (not supported) */ |
2054 | rc = REMOVE_NOT_SUPPORTED; |
2055 | } else { |
2056 | /* See if it's a bridge */ |
2057 | rc = pci_bus_read_config_byte(bus: pci_bus, devfn, PCI_HEADER_TYPE, val: &header_type); |
2058 | if (rc) |
2059 | return rc; |
2060 | |
2061 | /* If it's a bridge, check the VGA Enable bit */ |
2062 | if ((header_type & PCI_HEADER_TYPE_MASK) == PCI_HEADER_TYPE_BRIDGE) { |
2063 | rc = pci_bus_read_config_byte(bus: pci_bus, devfn, PCI_BRIDGE_CONTROL, val: &BCR); |
2064 | if (rc) |
2065 | return rc; |
2066 | |
2067 | /* If the VGA Enable bit is set, remove isn't |
2068 | * supported */ |
2069 | if (BCR & PCI_BRIDGE_CTL_VGA) |
2070 | rc = REMOVE_NOT_SUPPORTED; |
2071 | } |
2072 | } |
2073 | |
2074 | func = cpqhp_slot_find(bus: ctrl->bus, device, index: index++); |
2075 | } |
2076 | |
2077 | func = cpqhp_slot_find(bus: ctrl->bus, device, index: 0); |
2078 | if ((func != NULL) && !rc) { |
2079 | /* FIXME: Replace flag should be passed into process_SS */ |
2080 | replace_flag = !(ctrl->add_support); |
2081 | rc = remove_board(func, replace_flag, ctrl); |
2082 | } else if (!rc) { |
2083 | rc = 1; |
2084 | } |
2085 | |
2086 | return rc; |
2087 | } |
2088 | |
2089 | /** |
2090 | * switch_leds - switch the leds, go from one site to the other. |
2091 | * @ctrl: controller to use |
2092 | * @num_of_slots: number of slots to use |
2093 | * @work_LED: LED control value |
2094 | * @direction: 1 to start from the left side, 0 to start right. |
2095 | */ |
2096 | static void switch_leds(struct controller *ctrl, const int num_of_slots, |
2097 | u32 *work_LED, const int direction) |
2098 | { |
2099 | int loop; |
2100 | |
2101 | for (loop = 0; loop < num_of_slots; loop++) { |
2102 | if (direction) |
2103 | *work_LED = *work_LED >> 1; |
2104 | else |
2105 | *work_LED = *work_LED << 1; |
2106 | writel(val: *work_LED, addr: ctrl->hpc_reg + LED_CONTROL); |
2107 | |
2108 | set_SOGO(ctrl); |
2109 | |
2110 | /* Wait for SOGO interrupt */ |
2111 | wait_for_ctrl_irq(ctrl); |
2112 | |
2113 | /* Get ready for next iteration */ |
2114 | long_delay(delay: (2*HZ)/10); |
2115 | } |
2116 | } |
2117 | |
2118 | /** |
2119 | * cpqhp_hardware_test - runs hardware tests |
2120 | * @ctrl: target controller |
2121 | * @test_num: the number written to the "test" file in sysfs. |
2122 | * |
2123 | * For hot plug ctrl folks to play with. |
2124 | */ |
2125 | int cpqhp_hardware_test(struct controller *ctrl, int test_num) |
2126 | { |
2127 | u32 save_LED; |
2128 | u32 work_LED; |
2129 | int loop; |
2130 | int num_of_slots; |
2131 | |
2132 | num_of_slots = readb(addr: ctrl->hpc_reg + SLOT_MASK) & 0x0f; |
2133 | |
2134 | switch (test_num) { |
2135 | case 1: |
2136 | /* Do stuff here! */ |
2137 | |
2138 | /* Do that funky LED thing */ |
2139 | /* so we can restore them later */ |
2140 | save_LED = readl(addr: ctrl->hpc_reg + LED_CONTROL); |
2141 | work_LED = 0x01010101; |
2142 | switch_leds(ctrl, num_of_slots, work_LED: &work_LED, direction: 0); |
2143 | switch_leds(ctrl, num_of_slots, work_LED: &work_LED, direction: 1); |
2144 | switch_leds(ctrl, num_of_slots, work_LED: &work_LED, direction: 0); |
2145 | switch_leds(ctrl, num_of_slots, work_LED: &work_LED, direction: 1); |
2146 | |
2147 | work_LED = 0x01010000; |
2148 | writel(val: work_LED, addr: ctrl->hpc_reg + LED_CONTROL); |
2149 | switch_leds(ctrl, num_of_slots, work_LED: &work_LED, direction: 0); |
2150 | switch_leds(ctrl, num_of_slots, work_LED: &work_LED, direction: 1); |
2151 | work_LED = 0x00000101; |
2152 | writel(val: work_LED, addr: ctrl->hpc_reg + LED_CONTROL); |
2153 | switch_leds(ctrl, num_of_slots, work_LED: &work_LED, direction: 0); |
2154 | switch_leds(ctrl, num_of_slots, work_LED: &work_LED, direction: 1); |
2155 | |
2156 | work_LED = 0x01010000; |
2157 | writel(val: work_LED, addr: ctrl->hpc_reg + LED_CONTROL); |
2158 | for (loop = 0; loop < num_of_slots; loop++) { |
2159 | set_SOGO(ctrl); |
2160 | |
2161 | /* Wait for SOGO interrupt */ |
2162 | wait_for_ctrl_irq(ctrl); |
2163 | |
2164 | /* Get ready for next iteration */ |
2165 | long_delay(delay: (3*HZ)/10); |
2166 | work_LED = work_LED >> 16; |
2167 | writel(val: work_LED, addr: ctrl->hpc_reg + LED_CONTROL); |
2168 | |
2169 | set_SOGO(ctrl); |
2170 | |
2171 | /* Wait for SOGO interrupt */ |
2172 | wait_for_ctrl_irq(ctrl); |
2173 | |
2174 | /* Get ready for next iteration */ |
2175 | long_delay(delay: (3*HZ)/10); |
2176 | work_LED = work_LED << 16; |
2177 | writel(val: work_LED, addr: ctrl->hpc_reg + LED_CONTROL); |
2178 | work_LED = work_LED << 1; |
2179 | writel(val: work_LED, addr: ctrl->hpc_reg + LED_CONTROL); |
2180 | } |
2181 | |
2182 | /* put it back the way it was */ |
2183 | writel(val: save_LED, addr: ctrl->hpc_reg + LED_CONTROL); |
2184 | |
2185 | set_SOGO(ctrl); |
2186 | |
2187 | /* Wait for SOBS to be unset */ |
2188 | wait_for_ctrl_irq(ctrl); |
2189 | break; |
2190 | case 2: |
2191 | /* Do other stuff here! */ |
2192 | break; |
2193 | case 3: |
2194 | /* and more... */ |
2195 | break; |
2196 | } |
2197 | return 0; |
2198 | } |
2199 | |
2200 | |
2201 | /** |
2202 | * configure_new_device - Configures the PCI header information of one board. |
2203 | * @ctrl: pointer to controller structure |
2204 | * @func: pointer to function structure |
2205 | * @behind_bridge: 1 if this is a recursive call, 0 if not |
2206 | * @resources: pointer to set of resource lists |
2207 | * |
2208 | * Returns 0 if success. |
2209 | */ |
2210 | static u32 configure_new_device(struct controller *ctrl, struct pci_func *func, |
2211 | u8 behind_bridge, struct resource_lists *resources) |
2212 | { |
2213 | u8 temp_byte, function, max_functions, stop_it; |
2214 | int rc; |
2215 | u32 ID; |
2216 | struct pci_func *new_slot; |
2217 | int index; |
2218 | |
2219 | new_slot = func; |
2220 | |
2221 | dbg("%s\n" , __func__); |
2222 | /* Check for Multi-function device */ |
2223 | ctrl->pci_bus->number = func->bus; |
2224 | rc = pci_bus_read_config_byte(bus: ctrl->pci_bus, PCI_DEVFN(func->device, func->function), where: 0x0E, val: &temp_byte); |
2225 | if (rc) { |
2226 | dbg("%s: rc = %d\n" , __func__, rc); |
2227 | return rc; |
2228 | } |
2229 | |
2230 | if (temp_byte & 0x80) /* Multi-function device */ |
2231 | max_functions = 8; |
2232 | else |
2233 | max_functions = 1; |
2234 | |
2235 | function = 0; |
2236 | |
2237 | do { |
2238 | rc = configure_new_function(ctrl, func: new_slot, behind_bridge, resources); |
2239 | |
2240 | if (rc) { |
2241 | dbg("configure_new_function failed %d\n" , rc); |
2242 | index = 0; |
2243 | |
2244 | while (new_slot) { |
2245 | new_slot = cpqhp_slot_find(bus: new_slot->bus, device: new_slot->device, index: index++); |
2246 | |
2247 | if (new_slot) |
2248 | cpqhp_return_board_resources(func: new_slot, resources); |
2249 | } |
2250 | |
2251 | return rc; |
2252 | } |
2253 | |
2254 | function++; |
2255 | |
2256 | stop_it = 0; |
2257 | |
2258 | /* The following loop skips to the next present function |
2259 | * and creates a board structure */ |
2260 | |
2261 | while ((function < max_functions) && (!stop_it)) { |
2262 | pci_bus_read_config_dword(bus: ctrl->pci_bus, PCI_DEVFN(func->device, function), where: 0x00, val: &ID); |
2263 | |
2264 | if (PCI_POSSIBLE_ERROR(ID)) { |
2265 | function++; |
2266 | } else { |
2267 | /* Setup slot structure. */ |
2268 | new_slot = cpqhp_slot_create(busnumber: func->bus); |
2269 | |
2270 | if (new_slot == NULL) |
2271 | return 1; |
2272 | |
2273 | new_slot->bus = func->bus; |
2274 | new_slot->device = func->device; |
2275 | new_slot->function = function; |
2276 | new_slot->is_a_board = 1; |
2277 | new_slot->status = 0; |
2278 | |
2279 | stop_it++; |
2280 | } |
2281 | } |
2282 | |
2283 | } while (function < max_functions); |
2284 | dbg("returning from configure_new_device\n" ); |
2285 | |
2286 | return 0; |
2287 | } |
2288 | |
2289 | |
2290 | /* |
2291 | * Configuration logic that involves the hotplug data structures and |
2292 | * their bookkeeping |
2293 | */ |
2294 | |
2295 | |
2296 | /** |
2297 | * configure_new_function - Configures the PCI header information of one device |
2298 | * @ctrl: pointer to controller structure |
2299 | * @func: pointer to function structure |
2300 | * @behind_bridge: 1 if this is a recursive call, 0 if not |
2301 | * @resources: pointer to set of resource lists |
2302 | * |
2303 | * Calls itself recursively for bridged devices. |
2304 | * Returns 0 if success. |
2305 | */ |
2306 | static int configure_new_function(struct controller *ctrl, struct pci_func *func, |
2307 | u8 behind_bridge, |
2308 | struct resource_lists *resources) |
2309 | { |
2310 | int cloop; |
2311 | u8 IRQ = 0; |
2312 | u8 temp_byte; |
2313 | u8 device; |
2314 | u8 class_code; |
2315 | u16 command; |
2316 | u16 temp_word; |
2317 | u32 temp_dword; |
2318 | u32 rc; |
2319 | u32 temp_register; |
2320 | u32 base; |
2321 | u32 ID; |
2322 | unsigned int devfn; |
2323 | struct pci_resource *mem_node; |
2324 | struct pci_resource *p_mem_node; |
2325 | struct pci_resource *io_node; |
2326 | struct pci_resource *bus_node; |
2327 | struct pci_resource *hold_mem_node; |
2328 | struct pci_resource *hold_p_mem_node; |
2329 | struct pci_resource *hold_IO_node; |
2330 | struct pci_resource *hold_bus_node; |
2331 | struct irq_mapping irqs; |
2332 | struct pci_func *new_slot; |
2333 | struct pci_bus *pci_bus; |
2334 | struct resource_lists temp_resources; |
2335 | |
2336 | pci_bus = ctrl->pci_bus; |
2337 | pci_bus->number = func->bus; |
2338 | devfn = PCI_DEVFN(func->device, func->function); |
2339 | |
2340 | /* Check for Bridge */ |
2341 | rc = pci_bus_read_config_byte(bus: pci_bus, devfn, PCI_HEADER_TYPE, val: &temp_byte); |
2342 | if (rc) |
2343 | return rc; |
2344 | |
2345 | if ((temp_byte & PCI_HEADER_TYPE_MASK) == PCI_HEADER_TYPE_BRIDGE) { |
2346 | /* set Primary bus */ |
2347 | dbg("set Primary bus = %d\n" , func->bus); |
2348 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_PRIMARY_BUS, val: func->bus); |
2349 | if (rc) |
2350 | return rc; |
2351 | |
2352 | /* find range of buses to use */ |
2353 | dbg("find ranges of buses to use\n" ); |
2354 | bus_node = get_max_resource(head: &(resources->bus_head), size: 1); |
2355 | |
2356 | /* If we don't have any buses to allocate, we can't continue */ |
2357 | if (!bus_node) |
2358 | return -ENOMEM; |
2359 | |
2360 | /* set Secondary bus */ |
2361 | temp_byte = bus_node->base; |
2362 | dbg("set Secondary bus = %d\n" , bus_node->base); |
2363 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_SECONDARY_BUS, val: temp_byte); |
2364 | if (rc) |
2365 | return rc; |
2366 | |
2367 | /* set subordinate bus */ |
2368 | temp_byte = bus_node->base + bus_node->length - 1; |
2369 | dbg("set subordinate bus = %d\n" , bus_node->base + bus_node->length - 1); |
2370 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_SUBORDINATE_BUS, val: temp_byte); |
2371 | if (rc) |
2372 | return rc; |
2373 | |
2374 | /* set subordinate Latency Timer and base Latency Timer */ |
2375 | temp_byte = 0x40; |
2376 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_SEC_LATENCY_TIMER, val: temp_byte); |
2377 | if (rc) |
2378 | return rc; |
2379 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_LATENCY_TIMER, val: temp_byte); |
2380 | if (rc) |
2381 | return rc; |
2382 | |
2383 | /* set Cache Line size */ |
2384 | temp_byte = 0x08; |
2385 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_CACHE_LINE_SIZE, val: temp_byte); |
2386 | if (rc) |
2387 | return rc; |
2388 | |
2389 | /* Setup the IO, memory, and prefetchable windows */ |
2390 | io_node = get_max_resource(head: &(resources->io_head), size: 0x1000); |
2391 | if (!io_node) |
2392 | return -ENOMEM; |
2393 | mem_node = get_max_resource(head: &(resources->mem_head), size: 0x100000); |
2394 | if (!mem_node) |
2395 | return -ENOMEM; |
2396 | p_mem_node = get_max_resource(head: &(resources->p_mem_head), size: 0x100000); |
2397 | if (!p_mem_node) |
2398 | return -ENOMEM; |
2399 | dbg("Setup the IO, memory, and prefetchable windows\n" ); |
2400 | dbg("io_node\n" ); |
2401 | dbg("(base, len, next) (%x, %x, %p)\n" , io_node->base, |
2402 | io_node->length, io_node->next); |
2403 | dbg("mem_node\n" ); |
2404 | dbg("(base, len, next) (%x, %x, %p)\n" , mem_node->base, |
2405 | mem_node->length, mem_node->next); |
2406 | dbg("p_mem_node\n" ); |
2407 | dbg("(base, len, next) (%x, %x, %p)\n" , p_mem_node->base, |
2408 | p_mem_node->length, p_mem_node->next); |
2409 | |
2410 | /* set up the IRQ info */ |
2411 | if (!resources->irqs) { |
2412 | irqs.barber_pole = 0; |
2413 | irqs.interrupt[0] = 0; |
2414 | irqs.interrupt[1] = 0; |
2415 | irqs.interrupt[2] = 0; |
2416 | irqs.interrupt[3] = 0; |
2417 | irqs.valid_INT = 0; |
2418 | } else { |
2419 | irqs.barber_pole = resources->irqs->barber_pole; |
2420 | irqs.interrupt[0] = resources->irqs->interrupt[0]; |
2421 | irqs.interrupt[1] = resources->irqs->interrupt[1]; |
2422 | irqs.interrupt[2] = resources->irqs->interrupt[2]; |
2423 | irqs.interrupt[3] = resources->irqs->interrupt[3]; |
2424 | irqs.valid_INT = resources->irqs->valid_INT; |
2425 | } |
2426 | |
2427 | /* set up resource lists that are now aligned on top and bottom |
2428 | * for anything behind the bridge. */ |
2429 | temp_resources.bus_head = bus_node; |
2430 | temp_resources.io_head = io_node; |
2431 | temp_resources.mem_head = mem_node; |
2432 | temp_resources.p_mem_head = p_mem_node; |
2433 | temp_resources.irqs = &irqs; |
2434 | |
2435 | /* Make copies of the nodes we are going to pass down so that |
2436 | * if there is a problem,we can just use these to free resources |
2437 | */ |
2438 | hold_bus_node = kmalloc(size: sizeof(*hold_bus_node), GFP_KERNEL); |
2439 | hold_IO_node = kmalloc(size: sizeof(*hold_IO_node), GFP_KERNEL); |
2440 | hold_mem_node = kmalloc(size: sizeof(*hold_mem_node), GFP_KERNEL); |
2441 | hold_p_mem_node = kmalloc(size: sizeof(*hold_p_mem_node), GFP_KERNEL); |
2442 | |
2443 | if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) { |
2444 | kfree(objp: hold_bus_node); |
2445 | kfree(objp: hold_IO_node); |
2446 | kfree(objp: hold_mem_node); |
2447 | kfree(objp: hold_p_mem_node); |
2448 | |
2449 | return 1; |
2450 | } |
2451 | |
2452 | memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource)); |
2453 | |
2454 | bus_node->base += 1; |
2455 | bus_node->length -= 1; |
2456 | bus_node->next = NULL; |
2457 | |
2458 | /* If we have IO resources copy them and fill in the bridge's |
2459 | * IO range registers */ |
2460 | memcpy(hold_IO_node, io_node, sizeof(struct pci_resource)); |
2461 | io_node->next = NULL; |
2462 | |
2463 | /* set IO base and Limit registers */ |
2464 | temp_byte = io_node->base >> 8; |
2465 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_IO_BASE, val: temp_byte); |
2466 | |
2467 | temp_byte = (io_node->base + io_node->length - 1) >> 8; |
2468 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_IO_LIMIT, val: temp_byte); |
2469 | |
2470 | /* Copy the memory resources and fill in the bridge's memory |
2471 | * range registers. |
2472 | */ |
2473 | memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource)); |
2474 | mem_node->next = NULL; |
2475 | |
2476 | /* set Mem base and Limit registers */ |
2477 | temp_word = mem_node->base >> 16; |
2478 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_MEMORY_BASE, val: temp_word); |
2479 | |
2480 | temp_word = (mem_node->base + mem_node->length - 1) >> 16; |
2481 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_MEMORY_LIMIT, val: temp_word); |
2482 | |
2483 | memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource)); |
2484 | p_mem_node->next = NULL; |
2485 | |
2486 | /* set Pre Mem base and Limit registers */ |
2487 | temp_word = p_mem_node->base >> 16; |
2488 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_PREF_MEMORY_BASE, val: temp_word); |
2489 | |
2490 | temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16; |
2491 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, val: temp_word); |
2492 | |
2493 | /* Adjust this to compensate for extra adjustment in first loop |
2494 | */ |
2495 | irqs.barber_pole--; |
2496 | |
2497 | rc = 0; |
2498 | |
2499 | /* Here we actually find the devices and configure them */ |
2500 | for (device = 0; (device <= 0x1F) && !rc; device++) { |
2501 | irqs.barber_pole = (irqs.barber_pole + 1) & 0x03; |
2502 | |
2503 | ID = 0xFFFFFFFF; |
2504 | pci_bus->number = hold_bus_node->base; |
2505 | pci_bus_read_config_dword(bus: pci_bus, PCI_DEVFN(device, 0), where: 0x00, val: &ID); |
2506 | pci_bus->number = func->bus; |
2507 | |
2508 | if (!PCI_POSSIBLE_ERROR(ID)) { /* device present */ |
2509 | /* Setup slot structure. */ |
2510 | new_slot = cpqhp_slot_create(busnumber: hold_bus_node->base); |
2511 | |
2512 | if (new_slot == NULL) { |
2513 | rc = -ENOMEM; |
2514 | continue; |
2515 | } |
2516 | |
2517 | new_slot->bus = hold_bus_node->base; |
2518 | new_slot->device = device; |
2519 | new_slot->function = 0; |
2520 | new_slot->is_a_board = 1; |
2521 | new_slot->status = 0; |
2522 | |
2523 | rc = configure_new_device(ctrl, func: new_slot, behind_bridge: 1, resources: &temp_resources); |
2524 | dbg("configure_new_device rc=0x%x\n" , rc); |
2525 | } /* End of IF (device in slot?) */ |
2526 | } /* End of FOR loop */ |
2527 | |
2528 | if (rc) |
2529 | goto free_and_out; |
2530 | /* save the interrupt routing information */ |
2531 | if (resources->irqs) { |
2532 | resources->irqs->interrupt[0] = irqs.interrupt[0]; |
2533 | resources->irqs->interrupt[1] = irqs.interrupt[1]; |
2534 | resources->irqs->interrupt[2] = irqs.interrupt[2]; |
2535 | resources->irqs->interrupt[3] = irqs.interrupt[3]; |
2536 | resources->irqs->valid_INT = irqs.valid_INT; |
2537 | } else if (!behind_bridge) { |
2538 | /* We need to hook up the interrupts here */ |
2539 | for (cloop = 0; cloop < 4; cloop++) { |
2540 | if (irqs.valid_INT & (0x01 << cloop)) { |
2541 | rc = cpqhp_set_irq(bus_num: func->bus, dev_num: func->device, |
2542 | int_pin: cloop + 1, irq_num: irqs.interrupt[cloop]); |
2543 | if (rc) |
2544 | goto free_and_out; |
2545 | } |
2546 | } /* end of for loop */ |
2547 | } |
2548 | /* Return unused bus resources |
2549 | * First use the temporary node to store information for |
2550 | * the board */ |
2551 | if (bus_node && temp_resources.bus_head) { |
2552 | hold_bus_node->length = bus_node->base - hold_bus_node->base; |
2553 | |
2554 | hold_bus_node->next = func->bus_head; |
2555 | func->bus_head = hold_bus_node; |
2556 | |
2557 | temp_byte = temp_resources.bus_head->base - 1; |
2558 | |
2559 | /* set subordinate bus */ |
2560 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_SUBORDINATE_BUS, val: temp_byte); |
2561 | |
2562 | if (temp_resources.bus_head->length == 0) { |
2563 | kfree(objp: temp_resources.bus_head); |
2564 | temp_resources.bus_head = NULL; |
2565 | } else { |
2566 | return_resource(head: &(resources->bus_head), node: temp_resources.bus_head); |
2567 | } |
2568 | } |
2569 | |
2570 | /* If we have IO space available and there is some left, |
2571 | * return the unused portion */ |
2572 | if (hold_IO_node && temp_resources.io_head) { |
2573 | io_node = do_pre_bridge_resource_split(head: &(temp_resources.io_head), |
2574 | orig_head: &hold_IO_node, alignment: 0x1000); |
2575 | |
2576 | /* Check if we were able to split something off */ |
2577 | if (io_node) { |
2578 | hold_IO_node->base = io_node->base + io_node->length; |
2579 | |
2580 | temp_byte = (hold_IO_node->base) >> 8; |
2581 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_IO_BASE, val: temp_byte); |
2582 | |
2583 | return_resource(head: &(resources->io_head), node: io_node); |
2584 | } |
2585 | |
2586 | io_node = do_bridge_resource_split(head: &(temp_resources.io_head), alignment: 0x1000); |
2587 | |
2588 | /* Check if we were able to split something off */ |
2589 | if (io_node) { |
2590 | /* First use the temporary node to store |
2591 | * information for the board */ |
2592 | hold_IO_node->length = io_node->base - hold_IO_node->base; |
2593 | |
2594 | /* If we used any, add it to the board's list */ |
2595 | if (hold_IO_node->length) { |
2596 | hold_IO_node->next = func->io_head; |
2597 | func->io_head = hold_IO_node; |
2598 | |
2599 | temp_byte = (io_node->base - 1) >> 8; |
2600 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_IO_LIMIT, val: temp_byte); |
2601 | |
2602 | return_resource(head: &(resources->io_head), node: io_node); |
2603 | } else { |
2604 | /* it doesn't need any IO */ |
2605 | temp_word = 0x0000; |
2606 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_IO_LIMIT, val: temp_word); |
2607 | |
2608 | return_resource(head: &(resources->io_head), node: io_node); |
2609 | kfree(objp: hold_IO_node); |
2610 | } |
2611 | } else { |
2612 | /* it used most of the range */ |
2613 | hold_IO_node->next = func->io_head; |
2614 | func->io_head = hold_IO_node; |
2615 | } |
2616 | } else if (hold_IO_node) { |
2617 | /* it used the whole range */ |
2618 | hold_IO_node->next = func->io_head; |
2619 | func->io_head = hold_IO_node; |
2620 | } |
2621 | /* If we have memory space available and there is some left, |
2622 | * return the unused portion */ |
2623 | if (hold_mem_node && temp_resources.mem_head) { |
2624 | mem_node = do_pre_bridge_resource_split(head: &(temp_resources. mem_head), |
2625 | orig_head: &hold_mem_node, alignment: 0x100000); |
2626 | |
2627 | /* Check if we were able to split something off */ |
2628 | if (mem_node) { |
2629 | hold_mem_node->base = mem_node->base + mem_node->length; |
2630 | |
2631 | temp_word = (hold_mem_node->base) >> 16; |
2632 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_MEMORY_BASE, val: temp_word); |
2633 | |
2634 | return_resource(head: &(resources->mem_head), node: mem_node); |
2635 | } |
2636 | |
2637 | mem_node = do_bridge_resource_split(head: &(temp_resources.mem_head), alignment: 0x100000); |
2638 | |
2639 | /* Check if we were able to split something off */ |
2640 | if (mem_node) { |
2641 | /* First use the temporary node to store |
2642 | * information for the board */ |
2643 | hold_mem_node->length = mem_node->base - hold_mem_node->base; |
2644 | |
2645 | if (hold_mem_node->length) { |
2646 | hold_mem_node->next = func->mem_head; |
2647 | func->mem_head = hold_mem_node; |
2648 | |
2649 | /* configure end address */ |
2650 | temp_word = (mem_node->base - 1) >> 16; |
2651 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_MEMORY_LIMIT, val: temp_word); |
2652 | |
2653 | /* Return unused resources to the pool */ |
2654 | return_resource(head: &(resources->mem_head), node: mem_node); |
2655 | } else { |
2656 | /* it doesn't need any Mem */ |
2657 | temp_word = 0x0000; |
2658 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_MEMORY_LIMIT, val: temp_word); |
2659 | |
2660 | return_resource(head: &(resources->mem_head), node: mem_node); |
2661 | kfree(objp: hold_mem_node); |
2662 | } |
2663 | } else { |
2664 | /* it used most of the range */ |
2665 | hold_mem_node->next = func->mem_head; |
2666 | func->mem_head = hold_mem_node; |
2667 | } |
2668 | } else if (hold_mem_node) { |
2669 | /* it used the whole range */ |
2670 | hold_mem_node->next = func->mem_head; |
2671 | func->mem_head = hold_mem_node; |
2672 | } |
2673 | /* If we have prefetchable memory space available and there |
2674 | * is some left at the end, return the unused portion */ |
2675 | if (temp_resources.p_mem_head) { |
2676 | p_mem_node = do_pre_bridge_resource_split(head: &(temp_resources.p_mem_head), |
2677 | orig_head: &hold_p_mem_node, alignment: 0x100000); |
2678 | |
2679 | /* Check if we were able to split something off */ |
2680 | if (p_mem_node) { |
2681 | hold_p_mem_node->base = p_mem_node->base + p_mem_node->length; |
2682 | |
2683 | temp_word = (hold_p_mem_node->base) >> 16; |
2684 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_PREF_MEMORY_BASE, val: temp_word); |
2685 | |
2686 | return_resource(head: &(resources->p_mem_head), node: p_mem_node); |
2687 | } |
2688 | |
2689 | p_mem_node = do_bridge_resource_split(head: &(temp_resources.p_mem_head), alignment: 0x100000); |
2690 | |
2691 | /* Check if we were able to split something off */ |
2692 | if (p_mem_node) { |
2693 | /* First use the temporary node to store |
2694 | * information for the board */ |
2695 | hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base; |
2696 | |
2697 | /* If we used any, add it to the board's list */ |
2698 | if (hold_p_mem_node->length) { |
2699 | hold_p_mem_node->next = func->p_mem_head; |
2700 | func->p_mem_head = hold_p_mem_node; |
2701 | |
2702 | temp_word = (p_mem_node->base - 1) >> 16; |
2703 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, val: temp_word); |
2704 | |
2705 | return_resource(head: &(resources->p_mem_head), node: p_mem_node); |
2706 | } else { |
2707 | /* it doesn't need any PMem */ |
2708 | temp_word = 0x0000; |
2709 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, val: temp_word); |
2710 | |
2711 | return_resource(head: &(resources->p_mem_head), node: p_mem_node); |
2712 | kfree(objp: hold_p_mem_node); |
2713 | } |
2714 | } else { |
2715 | /* it used the most of the range */ |
2716 | hold_p_mem_node->next = func->p_mem_head; |
2717 | func->p_mem_head = hold_p_mem_node; |
2718 | } |
2719 | } else if (hold_p_mem_node) { |
2720 | /* it used the whole range */ |
2721 | hold_p_mem_node->next = func->p_mem_head; |
2722 | func->p_mem_head = hold_p_mem_node; |
2723 | } |
2724 | /* We should be configuring an IRQ and the bridge's base address |
2725 | * registers if it needs them. Although we have never seen such |
2726 | * a device */ |
2727 | |
2728 | /* enable card */ |
2729 | command = 0x0157; /* = PCI_COMMAND_IO | |
2730 | * PCI_COMMAND_MEMORY | |
2731 | * PCI_COMMAND_MASTER | |
2732 | * PCI_COMMAND_INVALIDATE | |
2733 | * PCI_COMMAND_PARITY | |
2734 | * PCI_COMMAND_SERR */ |
2735 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_COMMAND, val: command); |
2736 | |
2737 | /* set Bridge Control Register */ |
2738 | command = 0x07; /* = PCI_BRIDGE_CTL_PARITY | |
2739 | * PCI_BRIDGE_CTL_SERR | |
2740 | * PCI_BRIDGE_CTL_NO_ISA */ |
2741 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, PCI_BRIDGE_CONTROL, val: command); |
2742 | } else if ((temp_byte & PCI_HEADER_TYPE_MASK) == PCI_HEADER_TYPE_NORMAL) { |
2743 | /* Standard device */ |
2744 | rc = pci_bus_read_config_byte(bus: pci_bus, devfn, where: 0x0B, val: &class_code); |
2745 | |
2746 | if (class_code == PCI_BASE_CLASS_DISPLAY) { |
2747 | /* Display (video) adapter (not supported) */ |
2748 | return DEVICE_TYPE_NOT_SUPPORTED; |
2749 | } |
2750 | /* Figure out IO and memory needs */ |
2751 | for (cloop = 0x10; cloop <= 0x24; cloop += 4) { |
2752 | temp_register = 0xFFFFFFFF; |
2753 | |
2754 | dbg("CND: bus=%d, devfn=%d, offset=%d\n" , pci_bus->number, devfn, cloop); |
2755 | rc = pci_bus_write_config_dword(bus: pci_bus, devfn, where: cloop, val: temp_register); |
2756 | |
2757 | rc = pci_bus_read_config_dword(bus: pci_bus, devfn, where: cloop, val: &temp_register); |
2758 | dbg("CND: base = 0x%x\n" , temp_register); |
2759 | |
2760 | if (temp_register) { /* If this register is implemented */ |
2761 | if ((temp_register & 0x03L) == 0x01) { |
2762 | /* Map IO */ |
2763 | |
2764 | /* set base = amount of IO space */ |
2765 | base = temp_register & 0xFFFFFFFC; |
2766 | base = ~base + 1; |
2767 | |
2768 | dbg("CND: length = 0x%x\n" , base); |
2769 | io_node = get_io_resource(head: &(resources->io_head), size: base); |
2770 | if (!io_node) |
2771 | return -ENOMEM; |
2772 | dbg("Got io_node start = %8.8x, length = %8.8x next (%p)\n" , |
2773 | io_node->base, io_node->length, io_node->next); |
2774 | dbg("func (%p) io_head (%p)\n" , func, func->io_head); |
2775 | |
2776 | /* allocate the resource to the board */ |
2777 | base = io_node->base; |
2778 | io_node->next = func->io_head; |
2779 | func->io_head = io_node; |
2780 | } else if ((temp_register & 0x0BL) == 0x08) { |
2781 | /* Map prefetchable memory */ |
2782 | base = temp_register & 0xFFFFFFF0; |
2783 | base = ~base + 1; |
2784 | |
2785 | dbg("CND: length = 0x%x\n" , base); |
2786 | p_mem_node = get_resource(head: &(resources->p_mem_head), size: base); |
2787 | |
2788 | /* allocate the resource to the board */ |
2789 | if (p_mem_node) { |
2790 | base = p_mem_node->base; |
2791 | |
2792 | p_mem_node->next = func->p_mem_head; |
2793 | func->p_mem_head = p_mem_node; |
2794 | } else |
2795 | return -ENOMEM; |
2796 | } else if ((temp_register & 0x0BL) == 0x00) { |
2797 | /* Map memory */ |
2798 | base = temp_register & 0xFFFFFFF0; |
2799 | base = ~base + 1; |
2800 | |
2801 | dbg("CND: length = 0x%x\n" , base); |
2802 | mem_node = get_resource(head: &(resources->mem_head), size: base); |
2803 | |
2804 | /* allocate the resource to the board */ |
2805 | if (mem_node) { |
2806 | base = mem_node->base; |
2807 | |
2808 | mem_node->next = func->mem_head; |
2809 | func->mem_head = mem_node; |
2810 | } else |
2811 | return -ENOMEM; |
2812 | } else { |
2813 | /* Reserved bits or requesting space below 1M */ |
2814 | return NOT_ENOUGH_RESOURCES; |
2815 | } |
2816 | |
2817 | rc = pci_bus_write_config_dword(bus: pci_bus, devfn, where: cloop, val: base); |
2818 | |
2819 | /* Check for 64-bit base */ |
2820 | if ((temp_register & 0x07L) == 0x04) { |
2821 | cloop += 4; |
2822 | |
2823 | /* Upper 32 bits of address always zero |
2824 | * on today's systems */ |
2825 | /* FIXME this is probably not true on |
2826 | * Alpha and ia64??? */ |
2827 | base = 0; |
2828 | rc = pci_bus_write_config_dword(bus: pci_bus, devfn, where: cloop, val: base); |
2829 | } |
2830 | } |
2831 | } /* End of base register loop */ |
2832 | if (cpqhp_legacy_mode) { |
2833 | /* Figure out which interrupt pin this function uses */ |
2834 | rc = pci_bus_read_config_byte(bus: pci_bus, devfn, |
2835 | PCI_INTERRUPT_PIN, val: &temp_byte); |
2836 | |
2837 | /* If this function needs an interrupt and we are behind |
2838 | * a bridge and the pin is tied to something that's |
2839 | * already mapped, set this one the same */ |
2840 | if (temp_byte && resources->irqs && |
2841 | (resources->irqs->valid_INT & |
2842 | (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) { |
2843 | /* We have to share with something already set up */ |
2844 | IRQ = resources->irqs->interrupt[(temp_byte + |
2845 | resources->irqs->barber_pole - 1) & 0x03]; |
2846 | } else { |
2847 | /* Program IRQ based on card type */ |
2848 | rc = pci_bus_read_config_byte(bus: pci_bus, devfn, where: 0x0B, val: &class_code); |
2849 | |
2850 | if (class_code == PCI_BASE_CLASS_STORAGE) |
2851 | IRQ = cpqhp_disk_irq; |
2852 | else |
2853 | IRQ = cpqhp_nic_irq; |
2854 | } |
2855 | |
2856 | /* IRQ Line */ |
2857 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, PCI_INTERRUPT_LINE, val: IRQ); |
2858 | } |
2859 | |
2860 | if (!behind_bridge) { |
2861 | rc = cpqhp_set_irq(bus_num: func->bus, dev_num: func->device, int_pin: temp_byte, irq_num: IRQ); |
2862 | if (rc) |
2863 | return 1; |
2864 | } else { |
2865 | /* TBD - this code may also belong in the other clause |
2866 | * of this If statement */ |
2867 | resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03] = IRQ; |
2868 | resources->irqs->valid_INT |= 0x01 << (temp_byte + resources->irqs->barber_pole - 1) & 0x03; |
2869 | } |
2870 | |
2871 | /* Latency Timer */ |
2872 | temp_byte = 0x40; |
2873 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, |
2874 | PCI_LATENCY_TIMER, val: temp_byte); |
2875 | |
2876 | /* Cache Line size */ |
2877 | temp_byte = 0x08; |
2878 | rc = pci_bus_write_config_byte(bus: pci_bus, devfn, |
2879 | PCI_CACHE_LINE_SIZE, val: temp_byte); |
2880 | |
2881 | /* disable ROM base Address */ |
2882 | temp_dword = 0x00L; |
2883 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, |
2884 | PCI_ROM_ADDRESS, val: temp_dword); |
2885 | |
2886 | /* enable card */ |
2887 | temp_word = 0x0157; /* = PCI_COMMAND_IO | |
2888 | * PCI_COMMAND_MEMORY | |
2889 | * PCI_COMMAND_MASTER | |
2890 | * PCI_COMMAND_INVALIDATE | |
2891 | * PCI_COMMAND_PARITY | |
2892 | * PCI_COMMAND_SERR */ |
2893 | rc = pci_bus_write_config_word(bus: pci_bus, devfn, |
2894 | PCI_COMMAND, val: temp_word); |
2895 | } else { /* End of Not-A-Bridge else */ |
2896 | /* It's some strange type of PCI adapter (Cardbus?) */ |
2897 | return DEVICE_TYPE_NOT_SUPPORTED; |
2898 | } |
2899 | |
2900 | func->configured = 1; |
2901 | |
2902 | return 0; |
2903 | free_and_out: |
2904 | cpqhp_destroy_resource_list(resources: &temp_resources); |
2905 | |
2906 | return_resource(head: &(resources->bus_head), node: hold_bus_node); |
2907 | return_resource(head: &(resources->io_head), node: hold_IO_node); |
2908 | return_resource(head: &(resources->mem_head), node: hold_mem_node); |
2909 | return_resource(head: &(resources->p_mem_head), node: hold_p_mem_node); |
2910 | return rc; |
2911 | } |
2912 | |