1 | // SPDX-License-Identifier: GPL-2.0-or-later |
2 | /* |
3 | * toshiba_acpi.c - Toshiba Laptop ACPI Extras |
4 | * |
5 | * Copyright (C) 2002-2004 John Belmonte |
6 | * Copyright (C) 2008 Philip Langdale |
7 | * Copyright (C) 2010 Pierre Ducroquet |
8 | * Copyright (C) 2014-2016 Azael Avalos |
9 | * |
10 | * The devolpment page for this driver is located at |
11 | * http://memebeam.org/toys/ToshibaAcpiDriver. |
12 | * |
13 | * Credits: |
14 | * Jonathan A. Buzzard - Toshiba HCI info, and critical tips on reverse |
15 | * engineering the Windows drivers |
16 | * Yasushi Nagato - changes for linux kernel 2.4 -> 2.5 |
17 | * Rob Miller - TV out and hotkeys help |
18 | */ |
19 | |
20 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
21 | |
22 | #define TOSHIBA_ACPI_VERSION "0.24" |
23 | #define PROC_INTERFACE_VERSION 1 |
24 | |
25 | #include <linux/compiler.h> |
26 | #include <linux/dmi.h> |
27 | #include <linux/kernel.h> |
28 | #include <linux/module.h> |
29 | #include <linux/moduleparam.h> |
30 | #include <linux/init.h> |
31 | #include <linux/types.h> |
32 | #include <linux/proc_fs.h> |
33 | #include <linux/seq_file.h> |
34 | #include <linux/backlight.h> |
35 | #include <linux/input.h> |
36 | #include <linux/input/sparse-keymap.h> |
37 | #include <linux/leds.h> |
38 | #include <linux/slab.h> |
39 | #include <linux/workqueue.h> |
40 | #include <linux/i8042.h> |
41 | #include <linux/acpi.h> |
42 | #include <linux/uaccess.h> |
43 | #include <linux/miscdevice.h> |
44 | #include <linux/rfkill.h> |
45 | #include <linux/hwmon.h> |
46 | #include <linux/iio/iio.h> |
47 | #include <linux/toshiba.h> |
48 | #include <acpi/battery.h> |
49 | #include <acpi/video.h> |
50 | |
51 | MODULE_AUTHOR("John Belmonte" ); |
52 | MODULE_DESCRIPTION("Toshiba Laptop ACPI Extras Driver" ); |
53 | MODULE_LICENSE("GPL" ); |
54 | |
55 | static int turn_on_panel_on_resume = -1; |
56 | module_param(turn_on_panel_on_resume, int, 0644); |
57 | MODULE_PARM_DESC(turn_on_panel_on_resume, |
58 | "Call HCI_PANEL_POWER_ON on resume (-1 = auto, 0 = no, 1 = yes" ); |
59 | |
60 | #define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" |
61 | |
62 | /* Scan code for Fn key on TOS1900 models */ |
63 | #define TOS1900_FN_SCAN 0x6e |
64 | |
65 | /* Toshiba ACPI method paths */ |
66 | #define METHOD_VIDEO_OUT "\\_SB_.VALX.DSSX" |
67 | |
68 | /* |
69 | * The Toshiba configuration interface is composed of the HCI and the SCI, |
70 | * which are defined as follows: |
71 | * |
72 | * HCI is Toshiba's "Hardware Control Interface" which is supposed to |
73 | * be uniform across all their models. Ideally we would just call |
74 | * dedicated ACPI methods instead of using this primitive interface. |
75 | * However the ACPI methods seem to be incomplete in some areas (for |
76 | * example they allow setting, but not reading, the LCD brightness value), |
77 | * so this is still useful. |
78 | * |
79 | * SCI stands for "System Configuration Interface" which aim is to |
80 | * conceal differences in hardware between different models. |
81 | */ |
82 | |
83 | #define TCI_WORDS 6 |
84 | |
85 | /* Operations */ |
86 | #define HCI_SET 0xff00 |
87 | #define HCI_GET 0xfe00 |
88 | #define SCI_OPEN 0xf100 |
89 | #define SCI_CLOSE 0xf200 |
90 | #define SCI_GET 0xf300 |
91 | #define SCI_SET 0xf400 |
92 | |
93 | /* Return codes */ |
94 | #define TOS_SUCCESS 0x0000 |
95 | #define TOS_SUCCESS2 0x0001 |
96 | #define TOS_OPEN_CLOSE_OK 0x0044 |
97 | #define TOS_FAILURE 0x1000 |
98 | #define TOS_NOT_SUPPORTED 0x8000 |
99 | #define TOS_ALREADY_OPEN 0x8100 |
100 | #define TOS_NOT_OPENED 0x8200 |
101 | #define TOS_INPUT_DATA_ERROR 0x8300 |
102 | #define TOS_WRITE_PROTECTED 0x8400 |
103 | #define TOS_NOT_PRESENT 0x8600 |
104 | #define TOS_FIFO_EMPTY 0x8c00 |
105 | #define TOS_DATA_NOT_AVAILABLE 0x8d20 |
106 | #define TOS_NOT_INITIALIZED 0x8d50 |
107 | #define TOS_NOT_INSTALLED 0x8e00 |
108 | |
109 | /* Registers */ |
110 | #define HCI_PANEL_POWER_ON 0x0002 |
111 | #define HCI_FAN 0x0004 |
112 | #define HCI_TR_BACKLIGHT 0x0005 |
113 | #define HCI_SYSTEM_EVENT 0x0016 |
114 | #define HCI_VIDEO_OUT 0x001c |
115 | #define HCI_HOTKEY_EVENT 0x001e |
116 | #define HCI_LCD_BRIGHTNESS 0x002a |
117 | #define HCI_FAN_RPM 0x0045 |
118 | #define HCI_WIRELESS 0x0056 |
119 | #define HCI_ACCELEROMETER 0x006d |
120 | #define HCI_COOLING_METHOD 0x007f |
121 | #define HCI_KBD_ILLUMINATION 0x0095 |
122 | #define HCI_ECO_MODE 0x0097 |
123 | #define HCI_ACCELEROMETER2 0x00a6 |
124 | #define HCI_BATTERY_CHARGE_MODE 0x00ba |
125 | #define HCI_SYSTEM_INFO 0xc000 |
126 | #define SCI_PANEL_POWER_ON 0x010d |
127 | #define SCI_ILLUMINATION 0x014e |
128 | #define SCI_USB_SLEEP_CHARGE 0x0150 |
129 | #define SCI_KBD_ILLUM_STATUS 0x015c |
130 | #define SCI_USB_SLEEP_MUSIC 0x015e |
131 | #define SCI_USB_THREE 0x0169 |
132 | #define SCI_TOUCHPAD 0x050e |
133 | #define SCI_KBD_FUNCTION_KEYS 0x0522 |
134 | |
135 | /* Field definitions */ |
136 | #define HCI_ACCEL_MASK 0x7fff |
137 | #define HCI_ACCEL_DIRECTION_MASK 0x8000 |
138 | #define HCI_HOTKEY_DISABLE 0x0b |
139 | #define HCI_HOTKEY_ENABLE 0x09 |
140 | #define HCI_HOTKEY_SPECIAL_FUNCTIONS 0x10 |
141 | #define HCI_LCD_BRIGHTNESS_BITS 3 |
142 | #define HCI_LCD_BRIGHTNESS_SHIFT (16-HCI_LCD_BRIGHTNESS_BITS) |
143 | #define HCI_LCD_BRIGHTNESS_LEVELS (1 << HCI_LCD_BRIGHTNESS_BITS) |
144 | #define HCI_MISC_SHIFT 0x10 |
145 | #define HCI_SYSTEM_TYPE1 0x10 |
146 | #define HCI_SYSTEM_TYPE2 0x11 |
147 | #define HCI_VIDEO_OUT_LCD 0x1 |
148 | #define HCI_VIDEO_OUT_CRT 0x2 |
149 | #define HCI_VIDEO_OUT_TV 0x4 |
150 | #define SCI_KBD_MODE_MASK 0x1f |
151 | #define SCI_KBD_MODE_FNZ 0x1 |
152 | #define SCI_KBD_MODE_AUTO 0x2 |
153 | #define SCI_KBD_MODE_ON 0x8 |
154 | #define SCI_KBD_MODE_OFF 0x10 |
155 | #define SCI_KBD_TIME_MAX 0x3c001a |
156 | #define HCI_WIRELESS_STATUS 0x1 |
157 | #define HCI_WIRELESS_WWAN 0x3 |
158 | #define HCI_WIRELESS_WWAN_STATUS 0x2000 |
159 | #define HCI_WIRELESS_WWAN_POWER 0x4000 |
160 | #define SCI_USB_CHARGE_MODE_MASK 0xff |
161 | #define SCI_USB_CHARGE_DISABLED 0x00 |
162 | #define SCI_USB_CHARGE_ALTERNATE 0x09 |
163 | #define SCI_USB_CHARGE_TYPICAL 0x11 |
164 | #define SCI_USB_CHARGE_AUTO 0x21 |
165 | #define SCI_USB_CHARGE_BAT_MASK 0x7 |
166 | #define SCI_USB_CHARGE_BAT_LVL_OFF 0x1 |
167 | #define SCI_USB_CHARGE_BAT_LVL_ON 0x4 |
168 | #define SCI_USB_CHARGE_BAT_LVL 0x0200 |
169 | #define SCI_USB_CHARGE_RAPID_DSP 0x0300 |
170 | |
171 | struct toshiba_acpi_dev { |
172 | struct acpi_device *acpi_dev; |
173 | const char *method_hci; |
174 | struct input_dev *hotkey_dev; |
175 | struct work_struct hotkey_work; |
176 | struct backlight_device *backlight_dev; |
177 | struct led_classdev led_dev; |
178 | struct led_classdev kbd_led; |
179 | struct led_classdev eco_led; |
180 | struct miscdevice miscdev; |
181 | struct rfkill *wwan_rfk; |
182 | struct iio_dev *indio_dev; |
183 | #if IS_ENABLED(CONFIG_HWMON) |
184 | struct device *hwmon_device; |
185 | #endif |
186 | |
187 | int force_fan; |
188 | int last_key_event; |
189 | int key_event_valid; |
190 | int kbd_type; |
191 | int kbd_mode; |
192 | int kbd_time; |
193 | int usbsc_bat_level; |
194 | int usbsc_mode_base; |
195 | int hotkey_event_type; |
196 | int max_cooling_method; |
197 | |
198 | unsigned int illumination_supported:1; |
199 | unsigned int video_supported:1; |
200 | unsigned int fan_supported:1; |
201 | unsigned int fan_rpm_supported:1; |
202 | unsigned int system_event_supported:1; |
203 | unsigned int ntfy_supported:1; |
204 | unsigned int info_supported:1; |
205 | unsigned int tr_backlight_supported:1; |
206 | unsigned int kbd_illum_supported:1; |
207 | unsigned int touchpad_supported:1; |
208 | unsigned int eco_supported:1; |
209 | unsigned int accelerometer_supported:1; |
210 | unsigned int usb_sleep_charge_supported:1; |
211 | unsigned int usb_rapid_charge_supported:1; |
212 | unsigned int usb_sleep_music_supported:1; |
213 | unsigned int kbd_function_keys_supported:1; |
214 | unsigned int panel_power_on_supported:1; |
215 | unsigned int usb_three_supported:1; |
216 | unsigned int wwan_supported:1; |
217 | unsigned int cooling_method_supported:1; |
218 | unsigned int battery_charge_mode_supported:1; |
219 | unsigned int sysfs_created:1; |
220 | unsigned int special_functions; |
221 | |
222 | bool kbd_event_generated; |
223 | bool killswitch; |
224 | }; |
225 | |
226 | static struct toshiba_acpi_dev *toshiba_acpi; |
227 | |
228 | static bool disable_hotkeys; |
229 | module_param(disable_hotkeys, bool, 0444); |
230 | MODULE_PARM_DESC(disable_hotkeys, "Disables the hotkeys activation" ); |
231 | |
232 | static const struct acpi_device_id toshiba_device_ids[] = { |
233 | {"TOS6200" , 0}, |
234 | {"TOS6207" , 0}, |
235 | {"TOS6208" , 0}, |
236 | {"TOS1900" , 0}, |
237 | {"" , 0}, |
238 | }; |
239 | MODULE_DEVICE_TABLE(acpi, toshiba_device_ids); |
240 | |
241 | static const struct key_entry toshiba_acpi_keymap[] = { |
242 | { KE_KEY, 0x9e, { KEY_RFKILL } }, |
243 | { KE_KEY, 0x101, { KEY_MUTE } }, |
244 | { KE_KEY, 0x102, { KEY_ZOOMOUT } }, |
245 | { KE_KEY, 0x103, { KEY_ZOOMIN } }, |
246 | { KE_KEY, 0x10f, { KEY_TAB } }, |
247 | { KE_KEY, 0x12c, { KEY_KBDILLUMTOGGLE } }, |
248 | { KE_KEY, 0x139, { KEY_ZOOMRESET } }, |
249 | { KE_KEY, 0x13b, { KEY_COFFEE } }, |
250 | { KE_KEY, 0x13c, { KEY_BATTERY } }, |
251 | { KE_KEY, 0x13d, { KEY_SLEEP } }, |
252 | { KE_KEY, 0x13e, { KEY_SUSPEND } }, |
253 | { KE_KEY, 0x13f, { KEY_SWITCHVIDEOMODE } }, |
254 | { KE_KEY, 0x140, { KEY_BRIGHTNESSDOWN } }, |
255 | { KE_KEY, 0x141, { KEY_BRIGHTNESSUP } }, |
256 | { KE_KEY, 0x142, { KEY_WLAN } }, |
257 | { KE_KEY, 0x143, { KEY_TOUCHPAD_TOGGLE } }, |
258 | { KE_KEY, 0x17f, { KEY_FN } }, |
259 | { KE_KEY, 0xb05, { KEY_PROG2 } }, |
260 | { KE_KEY, 0xb06, { KEY_WWW } }, |
261 | { KE_KEY, 0xb07, { KEY_MAIL } }, |
262 | { KE_KEY, 0xb30, { KEY_STOP } }, |
263 | { KE_KEY, 0xb31, { KEY_PREVIOUSSONG } }, |
264 | { KE_KEY, 0xb32, { KEY_NEXTSONG } }, |
265 | { KE_KEY, 0xb33, { KEY_PLAYPAUSE } }, |
266 | { KE_KEY, 0xb5a, { KEY_MEDIA } }, |
267 | { KE_IGNORE, 0x0e00, { KEY_RESERVED } }, /* Wake from sleep */ |
268 | { KE_IGNORE, 0x1430, { KEY_RESERVED } }, /* Wake from sleep */ |
269 | { KE_IGNORE, 0x1501, { KEY_RESERVED } }, /* Output changed */ |
270 | { KE_IGNORE, 0x1502, { KEY_RESERVED } }, /* HDMI plugged/unplugged */ |
271 | { KE_IGNORE, 0x1ABE, { KEY_RESERVED } }, /* Protection level set */ |
272 | { KE_IGNORE, 0x1ABF, { KEY_RESERVED } }, /* Protection level off */ |
273 | { KE_END, 0 }, |
274 | }; |
275 | |
276 | static const struct key_entry toshiba_acpi_alt_keymap[] = { |
277 | { KE_KEY, 0x102, { KEY_ZOOMOUT } }, |
278 | { KE_KEY, 0x103, { KEY_ZOOMIN } }, |
279 | { KE_KEY, 0x12c, { KEY_KBDILLUMTOGGLE } }, |
280 | { KE_KEY, 0x139, { KEY_ZOOMRESET } }, |
281 | { KE_KEY, 0x13c, { KEY_BRIGHTNESSDOWN } }, |
282 | { KE_KEY, 0x13d, { KEY_BRIGHTNESSUP } }, |
283 | { KE_KEY, 0x13e, { KEY_SWITCHVIDEOMODE } }, |
284 | { KE_KEY, 0x13f, { KEY_TOUCHPAD_TOGGLE } }, |
285 | { KE_KEY, 0x157, { KEY_MUTE } }, |
286 | { KE_KEY, 0x158, { KEY_WLAN } }, |
287 | { KE_END, 0 }, |
288 | }; |
289 | |
290 | /* |
291 | * Utility |
292 | */ |
293 | |
294 | static inline void _set_bit(u32 *word, u32 mask, int value) |
295 | { |
296 | *word = (*word & ~mask) | (mask * value); |
297 | } |
298 | |
299 | /* |
300 | * ACPI interface wrappers |
301 | */ |
302 | |
303 | static int write_acpi_int(const char *methodName, int val) |
304 | { |
305 | acpi_status status; |
306 | |
307 | status = acpi_execute_simple_method(NULL, method: (char *)methodName, arg: val); |
308 | return (status == AE_OK) ? 0 : -EIO; |
309 | } |
310 | |
311 | /* |
312 | * Perform a raw configuration call. Here we don't care about input or output |
313 | * buffer format. |
314 | */ |
315 | static acpi_status tci_raw(struct toshiba_acpi_dev *dev, |
316 | const u32 in[TCI_WORDS], u32 out[TCI_WORDS]) |
317 | { |
318 | union acpi_object in_objs[TCI_WORDS], out_objs[TCI_WORDS + 1]; |
319 | struct acpi_object_list params; |
320 | struct acpi_buffer results; |
321 | acpi_status status; |
322 | int i; |
323 | |
324 | params.count = TCI_WORDS; |
325 | params.pointer = in_objs; |
326 | for (i = 0; i < TCI_WORDS; ++i) { |
327 | in_objs[i].type = ACPI_TYPE_INTEGER; |
328 | in_objs[i].integer.value = in[i]; |
329 | } |
330 | |
331 | results.length = sizeof(out_objs); |
332 | results.pointer = out_objs; |
333 | |
334 | status = acpi_evaluate_object(object: dev->acpi_dev->handle, |
335 | pathname: (char *)dev->method_hci, parameter_objects: ¶ms, |
336 | return_object_buffer: &results); |
337 | if ((status == AE_OK) && (out_objs->package.count <= TCI_WORDS)) { |
338 | for (i = 0; i < out_objs->package.count; ++i) |
339 | out[i] = out_objs->package.elements[i].integer.value; |
340 | } |
341 | |
342 | return status; |
343 | } |
344 | |
345 | /* |
346 | * Common hci tasks |
347 | * |
348 | * In addition to the ACPI status, the HCI system returns a result which |
349 | * may be useful (such as "not supported"). |
350 | */ |
351 | |
352 | static u32 hci_write(struct toshiba_acpi_dev *dev, u32 reg, u32 in1) |
353 | { |
354 | u32 in[TCI_WORDS] = { HCI_SET, reg, in1, 0, 0, 0 }; |
355 | u32 out[TCI_WORDS]; |
356 | acpi_status status = tci_raw(dev, in, out); |
357 | |
358 | return ACPI_SUCCESS(status) ? out[0] : TOS_FAILURE; |
359 | } |
360 | |
361 | static u32 hci_read(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1) |
362 | { |
363 | u32 in[TCI_WORDS] = { HCI_GET, reg, 0, 0, 0, 0 }; |
364 | u32 out[TCI_WORDS]; |
365 | acpi_status status = tci_raw(dev, in, out); |
366 | |
367 | if (ACPI_FAILURE(status)) |
368 | return TOS_FAILURE; |
369 | |
370 | *out1 = out[2]; |
371 | |
372 | return out[0]; |
373 | } |
374 | |
375 | /* |
376 | * Common sci tasks |
377 | */ |
378 | |
379 | static int sci_open(struct toshiba_acpi_dev *dev) |
380 | { |
381 | u32 in[TCI_WORDS] = { SCI_OPEN, 0, 0, 0, 0, 0 }; |
382 | u32 out[TCI_WORDS]; |
383 | acpi_status status = tci_raw(dev, in, out); |
384 | |
385 | if (ACPI_FAILURE(status)) { |
386 | pr_err("ACPI call to open SCI failed\n" ); |
387 | return 0; |
388 | } |
389 | |
390 | if (out[0] == TOS_OPEN_CLOSE_OK) { |
391 | return 1; |
392 | } else if (out[0] == TOS_ALREADY_OPEN) { |
393 | pr_info("Toshiba SCI already opened\n" ); |
394 | return 1; |
395 | } else if (out[0] == TOS_NOT_SUPPORTED) { |
396 | /* |
397 | * Some BIOSes do not have the SCI open/close functions |
398 | * implemented and return 0x8000 (Not Supported), failing to |
399 | * register some supported features. |
400 | * |
401 | * Simply return 1 if we hit those affected laptops to make the |
402 | * supported features work. |
403 | * |
404 | * In the case that some laptops really do not support the SCI, |
405 | * all the SCI dependent functions check for TOS_NOT_SUPPORTED, |
406 | * and thus, not registering support for the queried feature. |
407 | */ |
408 | return 1; |
409 | } else if (out[0] == TOS_NOT_PRESENT) { |
410 | pr_info("Toshiba SCI is not present\n" ); |
411 | } |
412 | |
413 | return 0; |
414 | } |
415 | |
416 | static void sci_close(struct toshiba_acpi_dev *dev) |
417 | { |
418 | u32 in[TCI_WORDS] = { SCI_CLOSE, 0, 0, 0, 0, 0 }; |
419 | u32 out[TCI_WORDS]; |
420 | acpi_status status = tci_raw(dev, in, out); |
421 | |
422 | if (ACPI_FAILURE(status)) { |
423 | pr_err("ACPI call to close SCI failed\n" ); |
424 | return; |
425 | } |
426 | |
427 | if (out[0] == TOS_OPEN_CLOSE_OK) |
428 | return; |
429 | else if (out[0] == TOS_NOT_OPENED) |
430 | pr_info("Toshiba SCI not opened\n" ); |
431 | else if (out[0] == TOS_NOT_PRESENT) |
432 | pr_info("Toshiba SCI is not present\n" ); |
433 | } |
434 | |
435 | static u32 sci_read(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1) |
436 | { |
437 | u32 in[TCI_WORDS] = { SCI_GET, reg, 0, 0, 0, 0 }; |
438 | u32 out[TCI_WORDS]; |
439 | acpi_status status = tci_raw(dev, in, out); |
440 | |
441 | if (ACPI_FAILURE(status)) |
442 | return TOS_FAILURE; |
443 | |
444 | *out1 = out[2]; |
445 | |
446 | return out[0]; |
447 | } |
448 | |
449 | static u32 sci_write(struct toshiba_acpi_dev *dev, u32 reg, u32 in1) |
450 | { |
451 | u32 in[TCI_WORDS] = { SCI_SET, reg, in1, 0, 0, 0 }; |
452 | u32 out[TCI_WORDS]; |
453 | acpi_status status = tci_raw(dev, in, out); |
454 | |
455 | return ACPI_SUCCESS(status) ? out[0] : TOS_FAILURE; |
456 | } |
457 | |
458 | /* Illumination support */ |
459 | static void toshiba_illumination_available(struct toshiba_acpi_dev *dev) |
460 | { |
461 | u32 in[TCI_WORDS] = { SCI_GET, SCI_ILLUMINATION, 0, 0, 0, 0 }; |
462 | u32 out[TCI_WORDS]; |
463 | acpi_status status; |
464 | |
465 | dev->illumination_supported = 0; |
466 | |
467 | if (!sci_open(dev)) |
468 | return; |
469 | |
470 | status = tci_raw(dev, in, out); |
471 | sci_close(dev); |
472 | if (ACPI_FAILURE(status)) { |
473 | pr_err("ACPI call to query Illumination support failed\n" ); |
474 | return; |
475 | } |
476 | |
477 | if (out[0] != TOS_SUCCESS) |
478 | return; |
479 | |
480 | dev->illumination_supported = 1; |
481 | } |
482 | |
483 | static void toshiba_illumination_set(struct led_classdev *cdev, |
484 | enum led_brightness brightness) |
485 | { |
486 | struct toshiba_acpi_dev *dev = container_of(cdev, |
487 | struct toshiba_acpi_dev, led_dev); |
488 | u32 result; |
489 | u32 state; |
490 | |
491 | /* First request : initialize communication. */ |
492 | if (!sci_open(dev)) |
493 | return; |
494 | |
495 | /* Switch the illumination on/off */ |
496 | state = brightness ? 1 : 0; |
497 | result = sci_write(dev, SCI_ILLUMINATION, in1: state); |
498 | sci_close(dev); |
499 | if (result == TOS_FAILURE) |
500 | pr_err("ACPI call for illumination failed\n" ); |
501 | } |
502 | |
503 | static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev) |
504 | { |
505 | struct toshiba_acpi_dev *dev = container_of(cdev, |
506 | struct toshiba_acpi_dev, led_dev); |
507 | u32 result; |
508 | u32 state; |
509 | |
510 | /* First request : initialize communication. */ |
511 | if (!sci_open(dev)) |
512 | return LED_OFF; |
513 | |
514 | /* Check the illumination */ |
515 | result = sci_read(dev, SCI_ILLUMINATION, out1: &state); |
516 | sci_close(dev); |
517 | if (result == TOS_FAILURE) { |
518 | pr_err("ACPI call for illumination failed\n" ); |
519 | return LED_OFF; |
520 | } else if (result != TOS_SUCCESS) { |
521 | return LED_OFF; |
522 | } |
523 | |
524 | return state ? LED_FULL : LED_OFF; |
525 | } |
526 | |
527 | /* KBD Illumination */ |
528 | static void toshiba_kbd_illum_available(struct toshiba_acpi_dev *dev) |
529 | { |
530 | u32 in[TCI_WORDS] = { SCI_GET, SCI_KBD_ILLUM_STATUS, 0, 0, 0, 0 }; |
531 | u32 out[TCI_WORDS]; |
532 | acpi_status status; |
533 | |
534 | dev->kbd_illum_supported = 0; |
535 | dev->kbd_event_generated = false; |
536 | |
537 | if (!sci_open(dev)) |
538 | return; |
539 | |
540 | status = tci_raw(dev, in, out); |
541 | sci_close(dev); |
542 | if (ACPI_FAILURE(status)) { |
543 | pr_err("ACPI call to query kbd illumination support failed\n" ); |
544 | return; |
545 | } |
546 | |
547 | if (out[0] != TOS_SUCCESS) |
548 | return; |
549 | |
550 | /* |
551 | * Check for keyboard backlight timeout max value, |
552 | * previous kbd backlight implementation set this to |
553 | * 0x3c0003, and now the new implementation set this |
554 | * to 0x3c001a, use this to distinguish between them. |
555 | */ |
556 | if (out[3] == SCI_KBD_TIME_MAX) |
557 | dev->kbd_type = 2; |
558 | else |
559 | dev->kbd_type = 1; |
560 | /* Get the current keyboard backlight mode */ |
561 | dev->kbd_mode = out[2] & SCI_KBD_MODE_MASK; |
562 | /* Get the current time (1-60 seconds) */ |
563 | dev->kbd_time = out[2] >> HCI_MISC_SHIFT; |
564 | /* Flag as supported */ |
565 | dev->kbd_illum_supported = 1; |
566 | } |
567 | |
568 | static int toshiba_kbd_illum_status_set(struct toshiba_acpi_dev *dev, u32 time) |
569 | { |
570 | u32 result; |
571 | |
572 | if (!sci_open(dev)) |
573 | return -EIO; |
574 | |
575 | result = sci_write(dev, SCI_KBD_ILLUM_STATUS, in1: time); |
576 | sci_close(dev); |
577 | if (result == TOS_FAILURE) |
578 | pr_err("ACPI call to set KBD backlight status failed\n" ); |
579 | else if (result == TOS_NOT_SUPPORTED) |
580 | return -ENODEV; |
581 | |
582 | return result == TOS_SUCCESS ? 0 : -EIO; |
583 | } |
584 | |
585 | static int toshiba_kbd_illum_status_get(struct toshiba_acpi_dev *dev, u32 *time) |
586 | { |
587 | u32 result; |
588 | |
589 | if (!sci_open(dev)) |
590 | return -EIO; |
591 | |
592 | result = sci_read(dev, SCI_KBD_ILLUM_STATUS, out1: time); |
593 | sci_close(dev); |
594 | if (result == TOS_FAILURE) |
595 | pr_err("ACPI call to get KBD backlight status failed\n" ); |
596 | else if (result == TOS_NOT_SUPPORTED) |
597 | return -ENODEV; |
598 | |
599 | return result == TOS_SUCCESS ? 0 : -EIO; |
600 | } |
601 | |
602 | static enum led_brightness toshiba_kbd_backlight_get(struct led_classdev *cdev) |
603 | { |
604 | struct toshiba_acpi_dev *dev = container_of(cdev, |
605 | struct toshiba_acpi_dev, kbd_led); |
606 | u32 result; |
607 | u32 state; |
608 | |
609 | /* Check the keyboard backlight state */ |
610 | result = hci_read(dev, HCI_KBD_ILLUMINATION, out1: &state); |
611 | if (result == TOS_FAILURE) { |
612 | pr_err("ACPI call to get the keyboard backlight failed\n" ); |
613 | return LED_OFF; |
614 | } else if (result != TOS_SUCCESS) { |
615 | return LED_OFF; |
616 | } |
617 | |
618 | return state ? LED_FULL : LED_OFF; |
619 | } |
620 | |
621 | static void toshiba_kbd_backlight_set(struct led_classdev *cdev, |
622 | enum led_brightness brightness) |
623 | { |
624 | struct toshiba_acpi_dev *dev = container_of(cdev, |
625 | struct toshiba_acpi_dev, kbd_led); |
626 | u32 result; |
627 | u32 state; |
628 | |
629 | /* Set the keyboard backlight state */ |
630 | state = brightness ? 1 : 0; |
631 | result = hci_write(dev, HCI_KBD_ILLUMINATION, in1: state); |
632 | if (result == TOS_FAILURE) |
633 | pr_err("ACPI call to set KBD Illumination mode failed\n" ); |
634 | } |
635 | |
636 | /* TouchPad support */ |
637 | static int toshiba_touchpad_set(struct toshiba_acpi_dev *dev, u32 state) |
638 | { |
639 | u32 result; |
640 | |
641 | if (!sci_open(dev)) |
642 | return -EIO; |
643 | |
644 | result = sci_write(dev, SCI_TOUCHPAD, in1: state); |
645 | sci_close(dev); |
646 | if (result == TOS_FAILURE) |
647 | pr_err("ACPI call to set the touchpad failed\n" ); |
648 | else if (result == TOS_NOT_SUPPORTED) |
649 | return -ENODEV; |
650 | |
651 | return result == TOS_SUCCESS ? 0 : -EIO; |
652 | } |
653 | |
654 | static int toshiba_touchpad_get(struct toshiba_acpi_dev *dev, u32 *state) |
655 | { |
656 | u32 result; |
657 | |
658 | if (!sci_open(dev)) |
659 | return -EIO; |
660 | |
661 | result = sci_read(dev, SCI_TOUCHPAD, out1: state); |
662 | sci_close(dev); |
663 | if (result == TOS_FAILURE) |
664 | pr_err("ACPI call to query the touchpad failed\n" ); |
665 | else if (result == TOS_NOT_SUPPORTED) |
666 | return -ENODEV; |
667 | |
668 | return result == TOS_SUCCESS ? 0 : -EIO; |
669 | } |
670 | |
671 | /* Eco Mode support */ |
672 | static void toshiba_eco_mode_available(struct toshiba_acpi_dev *dev) |
673 | { |
674 | u32 in[TCI_WORDS] = { HCI_GET, HCI_ECO_MODE, 0, 0, 0, 0 }; |
675 | u32 out[TCI_WORDS]; |
676 | acpi_status status; |
677 | |
678 | dev->eco_supported = 0; |
679 | |
680 | status = tci_raw(dev, in, out); |
681 | if (ACPI_FAILURE(status)) { |
682 | pr_err("ACPI call to get ECO led failed\n" ); |
683 | return; |
684 | } |
685 | |
686 | if (out[0] == TOS_INPUT_DATA_ERROR || out[0] == TOS_NOT_SUPPORTED) { |
687 | /* |
688 | * If we receive 0x8300 (Input Data Error), it means that the |
689 | * LED device is present, but that we just screwed the input |
690 | * parameters. |
691 | * |
692 | * On some laptops 0x8000 (Not supported) is also returned in |
693 | * this case, so we need to allow for that as well. |
694 | * |
695 | * Let's query the status of the LED to see if we really have a |
696 | * success response, indicating the actual presense of the LED, |
697 | * bail out otherwise. |
698 | */ |
699 | in[3] = 1; |
700 | status = tci_raw(dev, in, out); |
701 | if (ACPI_FAILURE(status)) { |
702 | pr_err("ACPI call to get ECO led failed\n" ); |
703 | return; |
704 | } |
705 | |
706 | if (out[0] != TOS_SUCCESS) |
707 | return; |
708 | |
709 | dev->eco_supported = 1; |
710 | } |
711 | } |
712 | |
713 | static enum led_brightness |
714 | toshiba_eco_mode_get_status(struct led_classdev *cdev) |
715 | { |
716 | struct toshiba_acpi_dev *dev = container_of(cdev, |
717 | struct toshiba_acpi_dev, eco_led); |
718 | u32 in[TCI_WORDS] = { HCI_GET, HCI_ECO_MODE, 0, 1, 0, 0 }; |
719 | u32 out[TCI_WORDS]; |
720 | acpi_status status; |
721 | |
722 | status = tci_raw(dev, in, out); |
723 | if (ACPI_FAILURE(status)) { |
724 | pr_err("ACPI call to get ECO led failed\n" ); |
725 | return LED_OFF; |
726 | } |
727 | |
728 | if (out[0] != TOS_SUCCESS) |
729 | return LED_OFF; |
730 | |
731 | return out[2] ? LED_FULL : LED_OFF; |
732 | } |
733 | |
734 | static void toshiba_eco_mode_set_status(struct led_classdev *cdev, |
735 | enum led_brightness brightness) |
736 | { |
737 | struct toshiba_acpi_dev *dev = container_of(cdev, |
738 | struct toshiba_acpi_dev, eco_led); |
739 | u32 in[TCI_WORDS] = { HCI_SET, HCI_ECO_MODE, 0, 1, 0, 0 }; |
740 | u32 out[TCI_WORDS]; |
741 | acpi_status status; |
742 | |
743 | /* Switch the Eco Mode led on/off */ |
744 | in[2] = (brightness) ? 1 : 0; |
745 | status = tci_raw(dev, in, out); |
746 | if (ACPI_FAILURE(status)) |
747 | pr_err("ACPI call to set ECO led failed\n" ); |
748 | } |
749 | |
750 | /* Accelerometer support */ |
751 | static void toshiba_accelerometer_available(struct toshiba_acpi_dev *dev) |
752 | { |
753 | u32 in[TCI_WORDS] = { HCI_GET, HCI_ACCELEROMETER2, 0, 0, 0, 0 }; |
754 | u32 out[TCI_WORDS]; |
755 | acpi_status status; |
756 | |
757 | dev->accelerometer_supported = 0; |
758 | |
759 | /* |
760 | * Check if the accelerometer call exists, |
761 | * this call also serves as initialization |
762 | */ |
763 | status = tci_raw(dev, in, out); |
764 | if (ACPI_FAILURE(status)) { |
765 | pr_err("ACPI call to query the accelerometer failed\n" ); |
766 | return; |
767 | } |
768 | |
769 | if (out[0] != TOS_SUCCESS) |
770 | return; |
771 | |
772 | dev->accelerometer_supported = 1; |
773 | } |
774 | |
775 | static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev, |
776 | u32 *xy, u32 *z) |
777 | { |
778 | u32 in[TCI_WORDS] = { HCI_GET, HCI_ACCELEROMETER, 0, 1, 0, 0 }; |
779 | u32 out[TCI_WORDS]; |
780 | acpi_status status; |
781 | |
782 | /* Check the Accelerometer status */ |
783 | status = tci_raw(dev, in, out); |
784 | if (ACPI_FAILURE(status)) { |
785 | pr_err("ACPI call to query the accelerometer failed\n" ); |
786 | return -EIO; |
787 | } |
788 | |
789 | if (out[0] == TOS_NOT_SUPPORTED) |
790 | return -ENODEV; |
791 | |
792 | if (out[0] != TOS_SUCCESS) |
793 | return -EIO; |
794 | |
795 | *xy = out[2]; |
796 | *z = out[4]; |
797 | |
798 | return 0; |
799 | } |
800 | |
801 | /* Sleep (Charge and Music) utilities support */ |
802 | static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev) |
803 | { |
804 | u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 }; |
805 | u32 out[TCI_WORDS]; |
806 | acpi_status status; |
807 | |
808 | dev->usb_sleep_charge_supported = 0; |
809 | |
810 | if (!sci_open(dev)) |
811 | return; |
812 | |
813 | status = tci_raw(dev, in, out); |
814 | if (ACPI_FAILURE(status)) { |
815 | pr_err("ACPI call to get USB Sleep and Charge mode failed\n" ); |
816 | sci_close(dev); |
817 | return; |
818 | } |
819 | |
820 | if (out[0] != TOS_SUCCESS) { |
821 | sci_close(dev); |
822 | return; |
823 | } |
824 | |
825 | dev->usbsc_mode_base = out[4]; |
826 | |
827 | in[5] = SCI_USB_CHARGE_BAT_LVL; |
828 | status = tci_raw(dev, in, out); |
829 | sci_close(dev); |
830 | if (ACPI_FAILURE(status)) { |
831 | pr_err("ACPI call to get USB Sleep and Charge mode failed\n" ); |
832 | return; |
833 | } |
834 | |
835 | if (out[0] != TOS_SUCCESS) |
836 | return; |
837 | |
838 | dev->usbsc_bat_level = out[2]; |
839 | /* Flag as supported */ |
840 | dev->usb_sleep_charge_supported = 1; |
841 | } |
842 | |
843 | static int toshiba_usb_sleep_charge_get(struct toshiba_acpi_dev *dev, |
844 | u32 *mode) |
845 | { |
846 | u32 result; |
847 | |
848 | if (!sci_open(dev)) |
849 | return -EIO; |
850 | |
851 | result = sci_read(dev, SCI_USB_SLEEP_CHARGE, out1: mode); |
852 | sci_close(dev); |
853 | if (result == TOS_FAILURE) |
854 | pr_err("ACPI call to set USB S&C mode failed\n" ); |
855 | else if (result == TOS_NOT_SUPPORTED) |
856 | return -ENODEV; |
857 | |
858 | return result == TOS_SUCCESS ? 0 : -EIO; |
859 | } |
860 | |
861 | static int toshiba_usb_sleep_charge_set(struct toshiba_acpi_dev *dev, |
862 | u32 mode) |
863 | { |
864 | u32 result; |
865 | |
866 | if (!sci_open(dev)) |
867 | return -EIO; |
868 | |
869 | result = sci_write(dev, SCI_USB_SLEEP_CHARGE, in1: mode); |
870 | sci_close(dev); |
871 | if (result == TOS_FAILURE) |
872 | pr_err("ACPI call to set USB S&C mode failed\n" ); |
873 | else if (result == TOS_NOT_SUPPORTED) |
874 | return -ENODEV; |
875 | |
876 | return result == TOS_SUCCESS ? 0 : -EIO; |
877 | } |
878 | |
879 | static int toshiba_sleep_functions_status_get(struct toshiba_acpi_dev *dev, |
880 | u32 *mode) |
881 | { |
882 | u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 }; |
883 | u32 out[TCI_WORDS]; |
884 | acpi_status status; |
885 | |
886 | if (!sci_open(dev)) |
887 | return -EIO; |
888 | |
889 | in[5] = SCI_USB_CHARGE_BAT_LVL; |
890 | status = tci_raw(dev, in, out); |
891 | sci_close(dev); |
892 | if (ACPI_FAILURE(status)) { |
893 | pr_err("ACPI call to get USB S&C battery level failed\n" ); |
894 | return -EIO; |
895 | } |
896 | |
897 | if (out[0] == TOS_NOT_SUPPORTED) |
898 | return -ENODEV; |
899 | |
900 | if (out[0] != TOS_SUCCESS) |
901 | return -EIO; |
902 | |
903 | *mode = out[2]; |
904 | |
905 | return 0; |
906 | |
907 | } |
908 | |
909 | static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev, |
910 | u32 mode) |
911 | { |
912 | u32 in[TCI_WORDS] = { SCI_SET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 }; |
913 | u32 out[TCI_WORDS]; |
914 | acpi_status status; |
915 | |
916 | if (!sci_open(dev)) |
917 | return -EIO; |
918 | |
919 | in[2] = mode; |
920 | in[5] = SCI_USB_CHARGE_BAT_LVL; |
921 | status = tci_raw(dev, in, out); |
922 | sci_close(dev); |
923 | if (ACPI_FAILURE(status)) { |
924 | pr_err("ACPI call to set USB S&C battery level failed\n" ); |
925 | return -EIO; |
926 | } |
927 | |
928 | if (out[0] == TOS_NOT_SUPPORTED) |
929 | return -ENODEV; |
930 | |
931 | return out[0] == TOS_SUCCESS ? 0 : -EIO; |
932 | } |
933 | |
934 | static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev, |
935 | u32 *state) |
936 | { |
937 | u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 }; |
938 | u32 out[TCI_WORDS]; |
939 | acpi_status status; |
940 | |
941 | if (!sci_open(dev)) |
942 | return -EIO; |
943 | |
944 | in[5] = SCI_USB_CHARGE_RAPID_DSP; |
945 | status = tci_raw(dev, in, out); |
946 | sci_close(dev); |
947 | if (ACPI_FAILURE(status)) { |
948 | pr_err("ACPI call to get USB Rapid Charge failed\n" ); |
949 | return -EIO; |
950 | } |
951 | |
952 | if (out[0] == TOS_NOT_SUPPORTED) |
953 | return -ENODEV; |
954 | |
955 | if (out[0] != TOS_SUCCESS && out[0] != TOS_SUCCESS2) |
956 | return -EIO; |
957 | |
958 | *state = out[2]; |
959 | |
960 | return 0; |
961 | } |
962 | |
963 | static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev, |
964 | u32 state) |
965 | { |
966 | u32 in[TCI_WORDS] = { SCI_SET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 }; |
967 | u32 out[TCI_WORDS]; |
968 | acpi_status status; |
969 | |
970 | if (!sci_open(dev)) |
971 | return -EIO; |
972 | |
973 | in[2] = state; |
974 | in[5] = SCI_USB_CHARGE_RAPID_DSP; |
975 | status = tci_raw(dev, in, out); |
976 | sci_close(dev); |
977 | if (ACPI_FAILURE(status)) { |
978 | pr_err("ACPI call to set USB Rapid Charge failed\n" ); |
979 | return -EIO; |
980 | } |
981 | |
982 | if (out[0] == TOS_NOT_SUPPORTED) |
983 | return -ENODEV; |
984 | |
985 | return (out[0] == TOS_SUCCESS || out[0] == TOS_SUCCESS2) ? 0 : -EIO; |
986 | } |
987 | |
988 | static int toshiba_usb_sleep_music_get(struct toshiba_acpi_dev *dev, u32 *state) |
989 | { |
990 | u32 result; |
991 | |
992 | if (!sci_open(dev)) |
993 | return -EIO; |
994 | |
995 | result = sci_read(dev, SCI_USB_SLEEP_MUSIC, out1: state); |
996 | sci_close(dev); |
997 | if (result == TOS_FAILURE) |
998 | pr_err("ACPI call to get Sleep and Music failed\n" ); |
999 | else if (result == TOS_NOT_SUPPORTED) |
1000 | return -ENODEV; |
1001 | |
1002 | return result == TOS_SUCCESS ? 0 : -EIO; |
1003 | } |
1004 | |
1005 | static int toshiba_usb_sleep_music_set(struct toshiba_acpi_dev *dev, u32 state) |
1006 | { |
1007 | u32 result; |
1008 | |
1009 | if (!sci_open(dev)) |
1010 | return -EIO; |
1011 | |
1012 | result = sci_write(dev, SCI_USB_SLEEP_MUSIC, in1: state); |
1013 | sci_close(dev); |
1014 | if (result == TOS_FAILURE) |
1015 | pr_err("ACPI call to set Sleep and Music failed\n" ); |
1016 | else if (result == TOS_NOT_SUPPORTED) |
1017 | return -ENODEV; |
1018 | |
1019 | return result == TOS_SUCCESS ? 0 : -EIO; |
1020 | } |
1021 | |
1022 | /* Keyboard function keys */ |
1023 | static int toshiba_function_keys_get(struct toshiba_acpi_dev *dev, u32 *mode) |
1024 | { |
1025 | u32 result; |
1026 | |
1027 | if (!sci_open(dev)) |
1028 | return -EIO; |
1029 | |
1030 | result = sci_read(dev, SCI_KBD_FUNCTION_KEYS, out1: mode); |
1031 | sci_close(dev); |
1032 | if (result == TOS_FAILURE) |
1033 | pr_err("ACPI call to get KBD function keys failed\n" ); |
1034 | else if (result == TOS_NOT_SUPPORTED) |
1035 | return -ENODEV; |
1036 | |
1037 | return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO; |
1038 | } |
1039 | |
1040 | static int toshiba_function_keys_set(struct toshiba_acpi_dev *dev, u32 mode) |
1041 | { |
1042 | u32 result; |
1043 | |
1044 | if (!sci_open(dev)) |
1045 | return -EIO; |
1046 | |
1047 | result = sci_write(dev, SCI_KBD_FUNCTION_KEYS, in1: mode); |
1048 | sci_close(dev); |
1049 | if (result == TOS_FAILURE) |
1050 | pr_err("ACPI call to set KBD function keys failed\n" ); |
1051 | else if (result == TOS_NOT_SUPPORTED) |
1052 | return -ENODEV; |
1053 | |
1054 | return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO; |
1055 | } |
1056 | |
1057 | /* Panel Power ON */ |
1058 | static int toshiba_panel_power_on_get(struct toshiba_acpi_dev *dev, u32 *state) |
1059 | { |
1060 | u32 result; |
1061 | |
1062 | if (!sci_open(dev)) |
1063 | return -EIO; |
1064 | |
1065 | result = sci_read(dev, SCI_PANEL_POWER_ON, out1: state); |
1066 | sci_close(dev); |
1067 | if (result == TOS_FAILURE) |
1068 | pr_err("ACPI call to get Panel Power ON failed\n" ); |
1069 | else if (result == TOS_NOT_SUPPORTED) |
1070 | return -ENODEV; |
1071 | |
1072 | return result == TOS_SUCCESS ? 0 : -EIO; |
1073 | } |
1074 | |
1075 | static int toshiba_panel_power_on_set(struct toshiba_acpi_dev *dev, u32 state) |
1076 | { |
1077 | u32 result; |
1078 | |
1079 | if (!sci_open(dev)) |
1080 | return -EIO; |
1081 | |
1082 | result = sci_write(dev, SCI_PANEL_POWER_ON, in1: state); |
1083 | sci_close(dev); |
1084 | if (result == TOS_FAILURE) |
1085 | pr_err("ACPI call to set Panel Power ON failed\n" ); |
1086 | else if (result == TOS_NOT_SUPPORTED) |
1087 | return -ENODEV; |
1088 | |
1089 | return result == TOS_SUCCESS ? 0 : -EIO; |
1090 | } |
1091 | |
1092 | /* USB Three */ |
1093 | static int toshiba_usb_three_get(struct toshiba_acpi_dev *dev, u32 *state) |
1094 | { |
1095 | u32 result; |
1096 | |
1097 | if (!sci_open(dev)) |
1098 | return -EIO; |
1099 | |
1100 | result = sci_read(dev, SCI_USB_THREE, out1: state); |
1101 | sci_close(dev); |
1102 | if (result == TOS_FAILURE) |
1103 | pr_err("ACPI call to get USB 3 failed\n" ); |
1104 | else if (result == TOS_NOT_SUPPORTED) |
1105 | return -ENODEV; |
1106 | |
1107 | return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO; |
1108 | } |
1109 | |
1110 | static int toshiba_usb_three_set(struct toshiba_acpi_dev *dev, u32 state) |
1111 | { |
1112 | u32 result; |
1113 | |
1114 | if (!sci_open(dev)) |
1115 | return -EIO; |
1116 | |
1117 | result = sci_write(dev, SCI_USB_THREE, in1: state); |
1118 | sci_close(dev); |
1119 | if (result == TOS_FAILURE) |
1120 | pr_err("ACPI call to set USB 3 failed\n" ); |
1121 | else if (result == TOS_NOT_SUPPORTED) |
1122 | return -ENODEV; |
1123 | |
1124 | return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO; |
1125 | } |
1126 | |
1127 | /* Hotkey Event type */ |
1128 | static int toshiba_hotkey_event_type_get(struct toshiba_acpi_dev *dev, |
1129 | u32 *type) |
1130 | { |
1131 | u32 in[TCI_WORDS] = { HCI_GET, HCI_SYSTEM_INFO, 0x03, 0, 0, 0 }; |
1132 | u32 out[TCI_WORDS]; |
1133 | acpi_status status; |
1134 | |
1135 | status = tci_raw(dev, in, out); |
1136 | if (ACPI_FAILURE(status)) { |
1137 | pr_err("ACPI call to get System type failed\n" ); |
1138 | return -EIO; |
1139 | } |
1140 | |
1141 | if (out[0] == TOS_NOT_SUPPORTED) |
1142 | return -ENODEV; |
1143 | |
1144 | if (out[0] != TOS_SUCCESS) |
1145 | return -EIO; |
1146 | |
1147 | *type = out[3]; |
1148 | |
1149 | return 0; |
1150 | } |
1151 | |
1152 | /* Wireless status (RFKill, WLAN, BT, WWAN) */ |
1153 | static int toshiba_wireless_status(struct toshiba_acpi_dev *dev) |
1154 | { |
1155 | u32 in[TCI_WORDS] = { HCI_GET, HCI_WIRELESS, 0, 0, 0, 0 }; |
1156 | u32 out[TCI_WORDS]; |
1157 | acpi_status status; |
1158 | |
1159 | in[3] = HCI_WIRELESS_STATUS; |
1160 | status = tci_raw(dev, in, out); |
1161 | |
1162 | if (ACPI_FAILURE(status)) { |
1163 | pr_err("ACPI call to get Wireless status failed\n" ); |
1164 | return -EIO; |
1165 | } |
1166 | |
1167 | if (out[0] == TOS_NOT_SUPPORTED) |
1168 | return -ENODEV; |
1169 | |
1170 | if (out[0] != TOS_SUCCESS) |
1171 | return -EIO; |
1172 | |
1173 | dev->killswitch = !!(out[2] & HCI_WIRELESS_STATUS); |
1174 | |
1175 | return 0; |
1176 | } |
1177 | |
1178 | /* WWAN */ |
1179 | static void toshiba_wwan_available(struct toshiba_acpi_dev *dev) |
1180 | { |
1181 | u32 in[TCI_WORDS] = { HCI_GET, HCI_WIRELESS, 0, 0, 0, 0 }; |
1182 | u32 out[TCI_WORDS]; |
1183 | acpi_status status; |
1184 | |
1185 | dev->wwan_supported = 0; |
1186 | |
1187 | /* |
1188 | * WWAN support can be queried by setting the in[3] value to |
1189 | * HCI_WIRELESS_WWAN (0x03). |
1190 | * |
1191 | * If supported, out[0] contains TOS_SUCCESS and out[2] contains |
1192 | * HCI_WIRELESS_WWAN_STATUS (0x2000). |
1193 | * |
1194 | * If not supported, out[0] contains TOS_INPUT_DATA_ERROR (0x8300) |
1195 | * or TOS_NOT_SUPPORTED (0x8000). |
1196 | */ |
1197 | in[3] = HCI_WIRELESS_WWAN; |
1198 | status = tci_raw(dev, in, out); |
1199 | if (ACPI_FAILURE(status)) { |
1200 | pr_err("ACPI call to get WWAN status failed\n" ); |
1201 | return; |
1202 | } |
1203 | |
1204 | if (out[0] != TOS_SUCCESS) |
1205 | return; |
1206 | |
1207 | dev->wwan_supported = (out[2] == HCI_WIRELESS_WWAN_STATUS); |
1208 | } |
1209 | |
1210 | static int toshiba_wwan_set(struct toshiba_acpi_dev *dev, u32 state) |
1211 | { |
1212 | u32 in[TCI_WORDS] = { HCI_SET, HCI_WIRELESS, state, 0, 0, 0 }; |
1213 | u32 out[TCI_WORDS]; |
1214 | acpi_status status; |
1215 | |
1216 | in[3] = HCI_WIRELESS_WWAN_STATUS; |
1217 | status = tci_raw(dev, in, out); |
1218 | if (ACPI_FAILURE(status)) { |
1219 | pr_err("ACPI call to set WWAN status failed\n" ); |
1220 | return -EIO; |
1221 | } |
1222 | |
1223 | if (out[0] == TOS_NOT_SUPPORTED) |
1224 | return -ENODEV; |
1225 | |
1226 | if (out[0] != TOS_SUCCESS) |
1227 | return -EIO; |
1228 | |
1229 | /* |
1230 | * Some devices only need to call HCI_WIRELESS_WWAN_STATUS to |
1231 | * (de)activate the device, but some others need the |
1232 | * HCI_WIRELESS_WWAN_POWER call as well. |
1233 | */ |
1234 | in[3] = HCI_WIRELESS_WWAN_POWER; |
1235 | status = tci_raw(dev, in, out); |
1236 | if (ACPI_FAILURE(status)) { |
1237 | pr_err("ACPI call to set WWAN power failed\n" ); |
1238 | return -EIO; |
1239 | } |
1240 | |
1241 | if (out[0] == TOS_NOT_SUPPORTED) |
1242 | return -ENODEV; |
1243 | |
1244 | return out[0] == TOS_SUCCESS ? 0 : -EIO; |
1245 | } |
1246 | |
1247 | /* Cooling Method */ |
1248 | static void toshiba_cooling_method_available(struct toshiba_acpi_dev *dev) |
1249 | { |
1250 | u32 in[TCI_WORDS] = { HCI_GET, HCI_COOLING_METHOD, 0, 0, 0, 0 }; |
1251 | u32 out[TCI_WORDS]; |
1252 | acpi_status status; |
1253 | |
1254 | dev->cooling_method_supported = 0; |
1255 | dev->max_cooling_method = 0; |
1256 | |
1257 | status = tci_raw(dev, in, out); |
1258 | if (ACPI_FAILURE(status)) { |
1259 | pr_err("ACPI call to get Cooling Method failed\n" ); |
1260 | return; |
1261 | } |
1262 | |
1263 | if (out[0] != TOS_SUCCESS && out[0] != TOS_SUCCESS2) |
1264 | return; |
1265 | |
1266 | dev->cooling_method_supported = 1; |
1267 | dev->max_cooling_method = out[3]; |
1268 | } |
1269 | |
1270 | static int toshiba_cooling_method_get(struct toshiba_acpi_dev *dev, u32 *state) |
1271 | { |
1272 | u32 result = hci_read(dev, HCI_COOLING_METHOD, out1: state); |
1273 | |
1274 | if (result == TOS_FAILURE) |
1275 | pr_err("ACPI call to get Cooling Method failed\n" ); |
1276 | |
1277 | if (result == TOS_NOT_SUPPORTED) |
1278 | return -ENODEV; |
1279 | |
1280 | return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO; |
1281 | } |
1282 | |
1283 | static int toshiba_cooling_method_set(struct toshiba_acpi_dev *dev, u32 state) |
1284 | { |
1285 | u32 result = hci_write(dev, HCI_COOLING_METHOD, in1: state); |
1286 | |
1287 | if (result == TOS_FAILURE) |
1288 | pr_err("ACPI call to set Cooling Method failed\n" ); |
1289 | |
1290 | if (result == TOS_NOT_SUPPORTED) |
1291 | return -ENODEV; |
1292 | |
1293 | return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO; |
1294 | } |
1295 | |
1296 | /* Battery charge control */ |
1297 | static void toshiba_battery_charge_mode_available(struct toshiba_acpi_dev *dev) |
1298 | { |
1299 | u32 in[TCI_WORDS] = { HCI_GET, HCI_BATTERY_CHARGE_MODE, 0, 0, 0, 0 }; |
1300 | u32 out[TCI_WORDS]; |
1301 | acpi_status status; |
1302 | |
1303 | dev->battery_charge_mode_supported = 0; |
1304 | |
1305 | status = tci_raw(dev, in, out); |
1306 | if (ACPI_FAILURE(status)) { |
1307 | pr_err("ACPI call to get Battery Charge Mode failed\n" ); |
1308 | return; |
1309 | } |
1310 | |
1311 | if (out[0] != TOS_SUCCESS && out[0] != TOS_SUCCESS2) |
1312 | return; |
1313 | |
1314 | dev->battery_charge_mode_supported = 1; |
1315 | } |
1316 | |
1317 | static int toshiba_battery_charge_mode_get(struct toshiba_acpi_dev *dev, u32 *state) |
1318 | { |
1319 | u32 in[TCI_WORDS] = { HCI_GET, HCI_BATTERY_CHARGE_MODE, 0, 0, 0, 0x1 }; |
1320 | u32 out[TCI_WORDS]; |
1321 | int retries = 3; |
1322 | |
1323 | do { |
1324 | acpi_status status = tci_raw(dev, in, out); |
1325 | |
1326 | if (ACPI_FAILURE(status)) |
1327 | pr_err("ACPI call to get Battery Charge Mode failed\n" ); |
1328 | switch (out[0]) { |
1329 | case TOS_SUCCESS: |
1330 | case TOS_SUCCESS2: |
1331 | *state = out[2]; |
1332 | return 0; |
1333 | case TOS_NOT_SUPPORTED: |
1334 | return -ENODEV; |
1335 | case TOS_DATA_NOT_AVAILABLE: |
1336 | retries--; |
1337 | break; |
1338 | default: |
1339 | return -EIO; |
1340 | } |
1341 | } while (retries); |
1342 | |
1343 | return -EIO; |
1344 | } |
1345 | |
1346 | static int toshiba_battery_charge_mode_set(struct toshiba_acpi_dev *dev, u32 state) |
1347 | { |
1348 | u32 result = hci_write(dev, HCI_BATTERY_CHARGE_MODE, in1: state); |
1349 | |
1350 | if (result == TOS_FAILURE) |
1351 | pr_err("ACPI call to set Battery Charge Mode failed\n" ); |
1352 | |
1353 | if (result == TOS_NOT_SUPPORTED) |
1354 | return -ENODEV; |
1355 | |
1356 | return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO; |
1357 | } |
1358 | |
1359 | /* Transflective Backlight */ |
1360 | static int get_tr_backlight_status(struct toshiba_acpi_dev *dev, u32 *status) |
1361 | { |
1362 | u32 result = hci_read(dev, HCI_TR_BACKLIGHT, out1: status); |
1363 | |
1364 | if (result == TOS_FAILURE) |
1365 | pr_err("ACPI call to get Transflective Backlight failed\n" ); |
1366 | else if (result == TOS_NOT_SUPPORTED) |
1367 | return -ENODEV; |
1368 | |
1369 | return result == TOS_SUCCESS ? 0 : -EIO; |
1370 | } |
1371 | |
1372 | static int set_tr_backlight_status(struct toshiba_acpi_dev *dev, u32 status) |
1373 | { |
1374 | u32 result = hci_write(dev, HCI_TR_BACKLIGHT, in1: !status); |
1375 | |
1376 | if (result == TOS_FAILURE) |
1377 | pr_err("ACPI call to set Transflective Backlight failed\n" ); |
1378 | else if (result == TOS_NOT_SUPPORTED) |
1379 | return -ENODEV; |
1380 | |
1381 | return result == TOS_SUCCESS ? 0 : -EIO; |
1382 | } |
1383 | |
1384 | static struct proc_dir_entry *toshiba_proc_dir; |
1385 | |
1386 | /* LCD Brightness */ |
1387 | static int __get_lcd_brightness(struct toshiba_acpi_dev *dev) |
1388 | { |
1389 | int brightness = 0; |
1390 | u32 result; |
1391 | u32 value; |
1392 | |
1393 | if (dev->tr_backlight_supported) { |
1394 | int ret = get_tr_backlight_status(dev, status: &value); |
1395 | |
1396 | if (ret) |
1397 | return ret; |
1398 | if (value) |
1399 | return 0; |
1400 | brightness++; |
1401 | } |
1402 | |
1403 | result = hci_read(dev, HCI_LCD_BRIGHTNESS, out1: &value); |
1404 | if (result == TOS_FAILURE) |
1405 | pr_err("ACPI call to get LCD Brightness failed\n" ); |
1406 | else if (result == TOS_NOT_SUPPORTED) |
1407 | return -ENODEV; |
1408 | |
1409 | return result == TOS_SUCCESS ? |
1410 | brightness + (value >> HCI_LCD_BRIGHTNESS_SHIFT) : |
1411 | -EIO; |
1412 | } |
1413 | |
1414 | static int get_lcd_brightness(struct backlight_device *bd) |
1415 | { |
1416 | struct toshiba_acpi_dev *dev = bl_get_data(bl_dev: bd); |
1417 | |
1418 | return __get_lcd_brightness(dev); |
1419 | } |
1420 | |
1421 | static int lcd_proc_show(struct seq_file *m, void *v) |
1422 | { |
1423 | struct toshiba_acpi_dev *dev = m->private; |
1424 | int levels; |
1425 | int value; |
1426 | |
1427 | if (!dev->backlight_dev) |
1428 | return -ENODEV; |
1429 | |
1430 | levels = dev->backlight_dev->props.max_brightness + 1; |
1431 | value = get_lcd_brightness(bd: dev->backlight_dev); |
1432 | if (value < 0) { |
1433 | pr_err("Error reading LCD brightness\n" ); |
1434 | return value; |
1435 | } |
1436 | |
1437 | seq_printf(m, fmt: "brightness: %d\n" , value); |
1438 | seq_printf(m, fmt: "brightness_levels: %d\n" , levels); |
1439 | |
1440 | return 0; |
1441 | } |
1442 | |
1443 | static int lcd_proc_open(struct inode *inode, struct file *file) |
1444 | { |
1445 | return single_open(file, lcd_proc_show, pde_data(inode)); |
1446 | } |
1447 | |
1448 | static int set_lcd_brightness(struct toshiba_acpi_dev *dev, int value) |
1449 | { |
1450 | u32 result; |
1451 | |
1452 | if (dev->tr_backlight_supported) { |
1453 | int ret = set_tr_backlight_status(dev, status: !value); |
1454 | |
1455 | if (ret) |
1456 | return ret; |
1457 | if (value) |
1458 | value--; |
1459 | } |
1460 | |
1461 | value = value << HCI_LCD_BRIGHTNESS_SHIFT; |
1462 | result = hci_write(dev, HCI_LCD_BRIGHTNESS, in1: value); |
1463 | if (result == TOS_FAILURE) |
1464 | pr_err("ACPI call to set LCD Brightness failed\n" ); |
1465 | else if (result == TOS_NOT_SUPPORTED) |
1466 | return -ENODEV; |
1467 | |
1468 | return result == TOS_SUCCESS ? 0 : -EIO; |
1469 | } |
1470 | |
1471 | static int set_lcd_status(struct backlight_device *bd) |
1472 | { |
1473 | struct toshiba_acpi_dev *dev = bl_get_data(bl_dev: bd); |
1474 | |
1475 | return set_lcd_brightness(dev, value: bd->props.brightness); |
1476 | } |
1477 | |
1478 | static ssize_t lcd_proc_write(struct file *file, const char __user *buf, |
1479 | size_t count, loff_t *pos) |
1480 | { |
1481 | struct toshiba_acpi_dev *dev = pde_data(inode: file_inode(f: file)); |
1482 | char cmd[42]; |
1483 | size_t len; |
1484 | int levels; |
1485 | int value; |
1486 | |
1487 | len = min(count, sizeof(cmd) - 1); |
1488 | if (copy_from_user(to: cmd, from: buf, n: len)) |
1489 | return -EFAULT; |
1490 | cmd[len] = '\0'; |
1491 | |
1492 | levels = dev->backlight_dev->props.max_brightness + 1; |
1493 | if (sscanf(cmd, " brightness : %i" , &value) != 1 && |
1494 | value < 0 && value > levels) |
1495 | return -EINVAL; |
1496 | |
1497 | if (set_lcd_brightness(dev, value)) |
1498 | return -EIO; |
1499 | |
1500 | return count; |
1501 | } |
1502 | |
1503 | static const struct proc_ops lcd_proc_ops = { |
1504 | .proc_open = lcd_proc_open, |
1505 | .proc_read = seq_read, |
1506 | .proc_lseek = seq_lseek, |
1507 | .proc_release = single_release, |
1508 | .proc_write = lcd_proc_write, |
1509 | }; |
1510 | |
1511 | /* Video-Out */ |
1512 | static int get_video_status(struct toshiba_acpi_dev *dev, u32 *status) |
1513 | { |
1514 | u32 result = hci_read(dev, HCI_VIDEO_OUT, out1: status); |
1515 | |
1516 | if (result == TOS_FAILURE) |
1517 | pr_err("ACPI call to get Video-Out failed\n" ); |
1518 | else if (result == TOS_NOT_SUPPORTED) |
1519 | return -ENODEV; |
1520 | |
1521 | return result == TOS_SUCCESS ? 0 : -EIO; |
1522 | } |
1523 | |
1524 | static int video_proc_show(struct seq_file *m, void *v) |
1525 | { |
1526 | struct toshiba_acpi_dev *dev = m->private; |
1527 | int is_lcd, is_crt, is_tv; |
1528 | u32 value; |
1529 | |
1530 | if (get_video_status(dev, status: &value)) |
1531 | return -EIO; |
1532 | |
1533 | is_lcd = (value & HCI_VIDEO_OUT_LCD) ? 1 : 0; |
1534 | is_crt = (value & HCI_VIDEO_OUT_CRT) ? 1 : 0; |
1535 | is_tv = (value & HCI_VIDEO_OUT_TV) ? 1 : 0; |
1536 | |
1537 | seq_printf(m, fmt: "lcd_out: %d\n" , is_lcd); |
1538 | seq_printf(m, fmt: "crt_out: %d\n" , is_crt); |
1539 | seq_printf(m, fmt: "tv_out: %d\n" , is_tv); |
1540 | |
1541 | return 0; |
1542 | } |
1543 | |
1544 | static int video_proc_open(struct inode *inode, struct file *file) |
1545 | { |
1546 | return single_open(file, video_proc_show, pde_data(inode)); |
1547 | } |
1548 | |
1549 | static ssize_t video_proc_write(struct file *file, const char __user *buf, |
1550 | size_t count, loff_t *pos) |
1551 | { |
1552 | struct toshiba_acpi_dev *dev = pde_data(inode: file_inode(f: file)); |
1553 | char *buffer; |
1554 | char *cmd; |
1555 | int lcd_out = -1, crt_out = -1, tv_out = -1; |
1556 | int remain = count; |
1557 | int value; |
1558 | int ret; |
1559 | u32 video_out; |
1560 | |
1561 | cmd = memdup_user_nul(buf, count); |
1562 | if (IS_ERR(ptr: cmd)) |
1563 | return PTR_ERR(ptr: cmd); |
1564 | |
1565 | buffer = cmd; |
1566 | |
1567 | /* |
1568 | * Scan expression. Multiple expressions may be delimited with ; |
1569 | * NOTE: To keep scanning simple, invalid fields are ignored. |
1570 | */ |
1571 | while (remain) { |
1572 | if (sscanf(buffer, " lcd_out : %i" , &value) == 1) |
1573 | lcd_out = value & 1; |
1574 | else if (sscanf(buffer, " crt_out : %i" , &value) == 1) |
1575 | crt_out = value & 1; |
1576 | else if (sscanf(buffer, " tv_out : %i" , &value) == 1) |
1577 | tv_out = value & 1; |
1578 | /* Advance to one character past the next ; */ |
1579 | do { |
1580 | ++buffer; |
1581 | --remain; |
1582 | } while (remain && *(buffer - 1) != ';'); |
1583 | } |
1584 | |
1585 | kfree(objp: cmd); |
1586 | |
1587 | ret = get_video_status(dev, status: &video_out); |
1588 | if (!ret) { |
1589 | unsigned int new_video_out = video_out; |
1590 | |
1591 | if (lcd_out != -1) |
1592 | _set_bit(word: &new_video_out, HCI_VIDEO_OUT_LCD, value: lcd_out); |
1593 | if (crt_out != -1) |
1594 | _set_bit(word: &new_video_out, HCI_VIDEO_OUT_CRT, value: crt_out); |
1595 | if (tv_out != -1) |
1596 | _set_bit(word: &new_video_out, HCI_VIDEO_OUT_TV, value: tv_out); |
1597 | /* |
1598 | * To avoid unnecessary video disruption, only write the new |
1599 | * video setting if something changed. |
1600 | */ |
1601 | if (new_video_out != video_out) |
1602 | ret = write_acpi_int(METHOD_VIDEO_OUT, val: new_video_out); |
1603 | } |
1604 | |
1605 | return ret ? -EIO : count; |
1606 | } |
1607 | |
1608 | static const struct proc_ops video_proc_ops = { |
1609 | .proc_open = video_proc_open, |
1610 | .proc_read = seq_read, |
1611 | .proc_lseek = seq_lseek, |
1612 | .proc_release = single_release, |
1613 | .proc_write = video_proc_write, |
1614 | }; |
1615 | |
1616 | /* Fan status */ |
1617 | static int get_fan_status(struct toshiba_acpi_dev *dev, u32 *status) |
1618 | { |
1619 | u32 result = hci_read(dev, HCI_FAN, out1: status); |
1620 | |
1621 | if (result == TOS_FAILURE) |
1622 | pr_err("ACPI call to get Fan status failed\n" ); |
1623 | else if (result == TOS_NOT_SUPPORTED) |
1624 | return -ENODEV; |
1625 | |
1626 | return result == TOS_SUCCESS ? 0 : -EIO; |
1627 | } |
1628 | |
1629 | static int set_fan_status(struct toshiba_acpi_dev *dev, u32 status) |
1630 | { |
1631 | u32 result = hci_write(dev, HCI_FAN, in1: status); |
1632 | |
1633 | if (result == TOS_FAILURE) |
1634 | pr_err("ACPI call to set Fan status failed\n" ); |
1635 | else if (result == TOS_NOT_SUPPORTED) |
1636 | return -ENODEV; |
1637 | |
1638 | return result == TOS_SUCCESS ? 0 : -EIO; |
1639 | } |
1640 | |
1641 | static int fan_proc_show(struct seq_file *m, void *v) |
1642 | { |
1643 | struct toshiba_acpi_dev *dev = m->private; |
1644 | u32 value; |
1645 | |
1646 | if (get_fan_status(dev, status: &value)) |
1647 | return -EIO; |
1648 | |
1649 | seq_printf(m, fmt: "running: %d\n" , (value > 0)); |
1650 | seq_printf(m, fmt: "force_on: %d\n" , dev->force_fan); |
1651 | |
1652 | return 0; |
1653 | } |
1654 | |
1655 | static int fan_proc_open(struct inode *inode, struct file *file) |
1656 | { |
1657 | return single_open(file, fan_proc_show, pde_data(inode)); |
1658 | } |
1659 | |
1660 | static ssize_t fan_proc_write(struct file *file, const char __user *buf, |
1661 | size_t count, loff_t *pos) |
1662 | { |
1663 | struct toshiba_acpi_dev *dev = pde_data(inode: file_inode(f: file)); |
1664 | char cmd[42]; |
1665 | size_t len; |
1666 | int value; |
1667 | |
1668 | len = min(count, sizeof(cmd) - 1); |
1669 | if (copy_from_user(to: cmd, from: buf, n: len)) |
1670 | return -EFAULT; |
1671 | cmd[len] = '\0'; |
1672 | |
1673 | if (sscanf(cmd, " force_on : %i" , &value) != 1 && |
1674 | value != 0 && value != 1) |
1675 | return -EINVAL; |
1676 | |
1677 | if (set_fan_status(dev, status: value)) |
1678 | return -EIO; |
1679 | |
1680 | dev->force_fan = value; |
1681 | |
1682 | return count; |
1683 | } |
1684 | |
1685 | static const struct proc_ops fan_proc_ops = { |
1686 | .proc_open = fan_proc_open, |
1687 | .proc_read = seq_read, |
1688 | .proc_lseek = seq_lseek, |
1689 | .proc_release = single_release, |
1690 | .proc_write = fan_proc_write, |
1691 | }; |
1692 | |
1693 | /* Fan RPM */ |
1694 | static int get_fan_rpm(struct toshiba_acpi_dev *dev, u32 *rpm) |
1695 | { |
1696 | u32 in[TCI_WORDS] = { HCI_GET, HCI_FAN_RPM, 0, 1, 0, 0 }; |
1697 | u32 out[TCI_WORDS]; |
1698 | acpi_status status = tci_raw(dev, in, out); |
1699 | |
1700 | if (ACPI_FAILURE(status)) { |
1701 | pr_err("ACPI call to get Fan speed failed\n" ); |
1702 | return -EIO; |
1703 | } |
1704 | |
1705 | if (out[0] == TOS_NOT_SUPPORTED) |
1706 | return -ENODEV; |
1707 | |
1708 | if (out[0] == TOS_SUCCESS) { |
1709 | *rpm = out[2]; |
1710 | return 0; |
1711 | } |
1712 | |
1713 | return -EIO; |
1714 | } |
1715 | |
1716 | static int keys_proc_show(struct seq_file *m, void *v) |
1717 | { |
1718 | struct toshiba_acpi_dev *dev = m->private; |
1719 | |
1720 | seq_printf(m, fmt: "hotkey_ready: %d\n" , dev->key_event_valid); |
1721 | seq_printf(m, fmt: "hotkey: 0x%04x\n" , dev->last_key_event); |
1722 | |
1723 | return 0; |
1724 | } |
1725 | |
1726 | static int keys_proc_open(struct inode *inode, struct file *file) |
1727 | { |
1728 | return single_open(file, keys_proc_show, pde_data(inode)); |
1729 | } |
1730 | |
1731 | static ssize_t keys_proc_write(struct file *file, const char __user *buf, |
1732 | size_t count, loff_t *pos) |
1733 | { |
1734 | struct toshiba_acpi_dev *dev = pde_data(inode: file_inode(f: file)); |
1735 | char cmd[42]; |
1736 | size_t len; |
1737 | int value; |
1738 | |
1739 | len = min(count, sizeof(cmd) - 1); |
1740 | if (copy_from_user(to: cmd, from: buf, n: len)) |
1741 | return -EFAULT; |
1742 | cmd[len] = '\0'; |
1743 | |
1744 | if (sscanf(cmd, " hotkey_ready : %i" , &value) == 1 && value == 0) |
1745 | dev->key_event_valid = 0; |
1746 | else |
1747 | return -EINVAL; |
1748 | |
1749 | return count; |
1750 | } |
1751 | |
1752 | static const struct proc_ops keys_proc_ops = { |
1753 | .proc_open = keys_proc_open, |
1754 | .proc_read = seq_read, |
1755 | .proc_lseek = seq_lseek, |
1756 | .proc_release = single_release, |
1757 | .proc_write = keys_proc_write, |
1758 | }; |
1759 | |
1760 | static int __maybe_unused version_proc_show(struct seq_file *m, void *v) |
1761 | { |
1762 | seq_printf(m, fmt: "driver: %s\n" , TOSHIBA_ACPI_VERSION); |
1763 | seq_printf(m, fmt: "proc_interface: %d\n" , PROC_INTERFACE_VERSION); |
1764 | return 0; |
1765 | } |
1766 | |
1767 | /* |
1768 | * Proc and module init |
1769 | */ |
1770 | |
1771 | #define PROC_TOSHIBA "toshiba" |
1772 | |
1773 | static void create_toshiba_proc_entries(struct toshiba_acpi_dev *dev) |
1774 | { |
1775 | if (dev->backlight_dev) |
1776 | proc_create_data("lcd" , S_IRUGO | S_IWUSR, toshiba_proc_dir, |
1777 | &lcd_proc_ops, dev); |
1778 | if (dev->video_supported) |
1779 | proc_create_data("video" , S_IRUGO | S_IWUSR, toshiba_proc_dir, |
1780 | &video_proc_ops, dev); |
1781 | if (dev->fan_supported) |
1782 | proc_create_data("fan" , S_IRUGO | S_IWUSR, toshiba_proc_dir, |
1783 | &fan_proc_ops, dev); |
1784 | if (dev->hotkey_dev) |
1785 | proc_create_data("keys" , S_IRUGO | S_IWUSR, toshiba_proc_dir, |
1786 | &keys_proc_ops, dev); |
1787 | proc_create_single_data(name: "version" , S_IRUGO, parent: toshiba_proc_dir, |
1788 | show: version_proc_show, data: dev); |
1789 | } |
1790 | |
1791 | static void remove_toshiba_proc_entries(struct toshiba_acpi_dev *dev) |
1792 | { |
1793 | if (dev->backlight_dev) |
1794 | remove_proc_entry("lcd" , toshiba_proc_dir); |
1795 | if (dev->video_supported) |
1796 | remove_proc_entry("video" , toshiba_proc_dir); |
1797 | if (dev->fan_supported) |
1798 | remove_proc_entry("fan" , toshiba_proc_dir); |
1799 | if (dev->hotkey_dev) |
1800 | remove_proc_entry("keys" , toshiba_proc_dir); |
1801 | remove_proc_entry("version" , toshiba_proc_dir); |
1802 | } |
1803 | |
1804 | static const struct backlight_ops toshiba_backlight_data = { |
1805 | .options = BL_CORE_SUSPENDRESUME, |
1806 | .get_brightness = get_lcd_brightness, |
1807 | .update_status = set_lcd_status, |
1808 | }; |
1809 | |
1810 | /* Keyboard backlight work */ |
1811 | static void toshiba_acpi_kbd_bl_work(struct work_struct *work); |
1812 | |
1813 | static DECLARE_WORK(kbd_bl_work, toshiba_acpi_kbd_bl_work); |
1814 | |
1815 | /* |
1816 | * Sysfs files |
1817 | */ |
1818 | static ssize_t version_show(struct device *dev, |
1819 | struct device_attribute *attr, char *buf) |
1820 | { |
1821 | return sprintf(buf, fmt: "%s\n" , TOSHIBA_ACPI_VERSION); |
1822 | } |
1823 | static DEVICE_ATTR_RO(version); |
1824 | |
1825 | static ssize_t fan_store(struct device *dev, |
1826 | struct device_attribute *attr, |
1827 | const char *buf, size_t count) |
1828 | { |
1829 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
1830 | int state; |
1831 | int ret; |
1832 | |
1833 | ret = kstrtoint(s: buf, base: 0, res: &state); |
1834 | if (ret) |
1835 | return ret; |
1836 | |
1837 | if (state != 0 && state != 1) |
1838 | return -EINVAL; |
1839 | |
1840 | ret = set_fan_status(dev: toshiba, status: state); |
1841 | if (ret) |
1842 | return ret; |
1843 | |
1844 | return count; |
1845 | } |
1846 | |
1847 | static ssize_t fan_show(struct device *dev, |
1848 | struct device_attribute *attr, char *buf) |
1849 | { |
1850 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
1851 | u32 value; |
1852 | int ret; |
1853 | |
1854 | ret = get_fan_status(dev: toshiba, status: &value); |
1855 | if (ret) |
1856 | return ret; |
1857 | |
1858 | return sprintf(buf, fmt: "%d\n" , value); |
1859 | } |
1860 | static DEVICE_ATTR_RW(fan); |
1861 | |
1862 | static ssize_t kbd_backlight_mode_store(struct device *dev, |
1863 | struct device_attribute *attr, |
1864 | const char *buf, size_t count) |
1865 | { |
1866 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
1867 | int mode; |
1868 | int ret; |
1869 | |
1870 | |
1871 | ret = kstrtoint(s: buf, base: 0, res: &mode); |
1872 | if (ret) |
1873 | return ret; |
1874 | |
1875 | /* Check for supported modes depending on keyboard backlight type */ |
1876 | if (toshiba->kbd_type == 1) { |
1877 | /* Type 1 supports SCI_KBD_MODE_FNZ and SCI_KBD_MODE_AUTO */ |
1878 | if (mode != SCI_KBD_MODE_FNZ && mode != SCI_KBD_MODE_AUTO) |
1879 | return -EINVAL; |
1880 | } else if (toshiba->kbd_type == 2) { |
1881 | /* Type 2 doesn't support SCI_KBD_MODE_FNZ */ |
1882 | if (mode != SCI_KBD_MODE_AUTO && mode != SCI_KBD_MODE_ON && |
1883 | mode != SCI_KBD_MODE_OFF) |
1884 | return -EINVAL; |
1885 | } |
1886 | |
1887 | /* |
1888 | * Set the Keyboard Backlight Mode where: |
1889 | * Auto - KBD backlight turns off automatically in given time |
1890 | * FN-Z - KBD backlight "toggles" when hotkey pressed |
1891 | * ON - KBD backlight is always on |
1892 | * OFF - KBD backlight is always off |
1893 | */ |
1894 | |
1895 | /* Only make a change if the actual mode has changed */ |
1896 | if (toshiba->kbd_mode != mode) { |
1897 | /* Shift the time to "base time" (0x3c0000 == 60 seconds) */ |
1898 | int time = toshiba->kbd_time << HCI_MISC_SHIFT; |
1899 | |
1900 | /* OR the "base time" to the actual method format */ |
1901 | if (toshiba->kbd_type == 1) { |
1902 | /* Type 1 requires the current mode */ |
1903 | time |= toshiba->kbd_mode; |
1904 | } else if (toshiba->kbd_type == 2) { |
1905 | /* Type 2 requires the desired mode */ |
1906 | time |= mode; |
1907 | } |
1908 | |
1909 | ret = toshiba_kbd_illum_status_set(dev: toshiba, time); |
1910 | if (ret) |
1911 | return ret; |
1912 | |
1913 | toshiba->kbd_mode = mode; |
1914 | toshiba_acpi->kbd_mode = mode; |
1915 | |
1916 | /* |
1917 | * Some laptop models with the second generation backlit |
1918 | * keyboard (type 2) do not generate the keyboard backlight |
1919 | * changed event (0x92), and thus, the driver will never update |
1920 | * the sysfs entries. |
1921 | * |
1922 | * The event is generated right when changing the keyboard |
1923 | * backlight mode and the *notify function will set the |
1924 | * kbd_event_generated to true. |
1925 | * |
1926 | * In case the event is not generated, schedule the keyboard |
1927 | * backlight work to update the sysfs entries and emulate the |
1928 | * event via genetlink. |
1929 | */ |
1930 | if (toshiba->kbd_type == 2 && |
1931 | !toshiba->kbd_event_generated) |
1932 | schedule_work(work: &kbd_bl_work); |
1933 | } |
1934 | |
1935 | return count; |
1936 | } |
1937 | |
1938 | static ssize_t kbd_backlight_mode_show(struct device *dev, |
1939 | struct device_attribute *attr, |
1940 | char *buf) |
1941 | { |
1942 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
1943 | u32 time; |
1944 | |
1945 | if (toshiba_kbd_illum_status_get(dev: toshiba, time: &time) < 0) |
1946 | return -EIO; |
1947 | |
1948 | return sprintf(buf, fmt: "%i\n" , time & SCI_KBD_MODE_MASK); |
1949 | } |
1950 | static DEVICE_ATTR_RW(kbd_backlight_mode); |
1951 | |
1952 | static ssize_t kbd_type_show(struct device *dev, |
1953 | struct device_attribute *attr, char *buf) |
1954 | { |
1955 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
1956 | |
1957 | return sprintf(buf, fmt: "%d\n" , toshiba->kbd_type); |
1958 | } |
1959 | static DEVICE_ATTR_RO(kbd_type); |
1960 | |
1961 | static ssize_t available_kbd_modes_show(struct device *dev, |
1962 | struct device_attribute *attr, |
1963 | char *buf) |
1964 | { |
1965 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
1966 | |
1967 | if (toshiba->kbd_type == 1) |
1968 | return sprintf(buf, fmt: "0x%x 0x%x\n" , |
1969 | SCI_KBD_MODE_FNZ, SCI_KBD_MODE_AUTO); |
1970 | |
1971 | return sprintf(buf, fmt: "0x%x 0x%x 0x%x\n" , |
1972 | SCI_KBD_MODE_AUTO, SCI_KBD_MODE_ON, SCI_KBD_MODE_OFF); |
1973 | } |
1974 | static DEVICE_ATTR_RO(available_kbd_modes); |
1975 | |
1976 | static ssize_t kbd_backlight_timeout_store(struct device *dev, |
1977 | struct device_attribute *attr, |
1978 | const char *buf, size_t count) |
1979 | { |
1980 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
1981 | int time; |
1982 | int ret; |
1983 | |
1984 | ret = kstrtoint(s: buf, base: 0, res: &time); |
1985 | if (ret) |
1986 | return ret; |
1987 | |
1988 | /* Check for supported values depending on kbd_type */ |
1989 | if (toshiba->kbd_type == 1) { |
1990 | if (time < 0 || time > 60) |
1991 | return -EINVAL; |
1992 | } else if (toshiba->kbd_type == 2) { |
1993 | if (time < 1 || time > 60) |
1994 | return -EINVAL; |
1995 | } |
1996 | |
1997 | /* Set the Keyboard Backlight Timeout */ |
1998 | |
1999 | /* Only make a change if the actual timeout has changed */ |
2000 | if (toshiba->kbd_time != time) { |
2001 | /* Shift the time to "base time" (0x3c0000 == 60 seconds) */ |
2002 | time = time << HCI_MISC_SHIFT; |
2003 | /* OR the "base time" to the actual method format */ |
2004 | if (toshiba->kbd_type == 1) |
2005 | time |= SCI_KBD_MODE_FNZ; |
2006 | else if (toshiba->kbd_type == 2) |
2007 | time |= SCI_KBD_MODE_AUTO; |
2008 | |
2009 | ret = toshiba_kbd_illum_status_set(dev: toshiba, time); |
2010 | if (ret) |
2011 | return ret; |
2012 | |
2013 | toshiba->kbd_time = time >> HCI_MISC_SHIFT; |
2014 | } |
2015 | |
2016 | return count; |
2017 | } |
2018 | |
2019 | static ssize_t kbd_backlight_timeout_show(struct device *dev, |
2020 | struct device_attribute *attr, |
2021 | char *buf) |
2022 | { |
2023 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2024 | u32 time; |
2025 | |
2026 | if (toshiba_kbd_illum_status_get(dev: toshiba, time: &time) < 0) |
2027 | return -EIO; |
2028 | |
2029 | return sprintf(buf, fmt: "%i\n" , time >> HCI_MISC_SHIFT); |
2030 | } |
2031 | static DEVICE_ATTR_RW(kbd_backlight_timeout); |
2032 | |
2033 | static ssize_t touchpad_store(struct device *dev, |
2034 | struct device_attribute *attr, |
2035 | const char *buf, size_t count) |
2036 | { |
2037 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2038 | int state; |
2039 | int ret; |
2040 | |
2041 | /* Set the TouchPad on/off, 0 - Disable | 1 - Enable */ |
2042 | ret = kstrtoint(s: buf, base: 0, res: &state); |
2043 | if (ret) |
2044 | return ret; |
2045 | if (state != 0 && state != 1) |
2046 | return -EINVAL; |
2047 | |
2048 | ret = toshiba_touchpad_set(dev: toshiba, state); |
2049 | if (ret) |
2050 | return ret; |
2051 | |
2052 | return count; |
2053 | } |
2054 | |
2055 | static ssize_t touchpad_show(struct device *dev, |
2056 | struct device_attribute *attr, char *buf) |
2057 | { |
2058 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2059 | u32 state; |
2060 | int ret; |
2061 | |
2062 | ret = toshiba_touchpad_get(dev: toshiba, state: &state); |
2063 | if (ret < 0) |
2064 | return ret; |
2065 | |
2066 | return sprintf(buf, fmt: "%i\n" , state); |
2067 | } |
2068 | static DEVICE_ATTR_RW(touchpad); |
2069 | |
2070 | static ssize_t usb_sleep_charge_show(struct device *dev, |
2071 | struct device_attribute *attr, char *buf) |
2072 | { |
2073 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2074 | u32 mode; |
2075 | int ret; |
2076 | |
2077 | ret = toshiba_usb_sleep_charge_get(dev: toshiba, mode: &mode); |
2078 | if (ret < 0) |
2079 | return ret; |
2080 | |
2081 | return sprintf(buf, fmt: "%x\n" , mode & SCI_USB_CHARGE_MODE_MASK); |
2082 | } |
2083 | |
2084 | static ssize_t usb_sleep_charge_store(struct device *dev, |
2085 | struct device_attribute *attr, |
2086 | const char *buf, size_t count) |
2087 | { |
2088 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2089 | int state; |
2090 | u32 mode; |
2091 | int ret; |
2092 | |
2093 | ret = kstrtoint(s: buf, base: 0, res: &state); |
2094 | if (ret) |
2095 | return ret; |
2096 | /* |
2097 | * Check for supported values, where: |
2098 | * 0 - Disabled |
2099 | * 1 - Alternate (Non USB conformant devices that require more power) |
2100 | * 2 - Auto (USB conformant devices) |
2101 | * 3 - Typical |
2102 | */ |
2103 | if (state != 0 && state != 1 && state != 2 && state != 3) |
2104 | return -EINVAL; |
2105 | |
2106 | /* Set the USB charging mode to internal value */ |
2107 | mode = toshiba->usbsc_mode_base; |
2108 | if (state == 0) |
2109 | mode |= SCI_USB_CHARGE_DISABLED; |
2110 | else if (state == 1) |
2111 | mode |= SCI_USB_CHARGE_ALTERNATE; |
2112 | else if (state == 2) |
2113 | mode |= SCI_USB_CHARGE_AUTO; |
2114 | else if (state == 3) |
2115 | mode |= SCI_USB_CHARGE_TYPICAL; |
2116 | |
2117 | ret = toshiba_usb_sleep_charge_set(dev: toshiba, mode); |
2118 | if (ret) |
2119 | return ret; |
2120 | |
2121 | return count; |
2122 | } |
2123 | static DEVICE_ATTR_RW(usb_sleep_charge); |
2124 | |
2125 | static ssize_t sleep_functions_on_battery_show(struct device *dev, |
2126 | struct device_attribute *attr, |
2127 | char *buf) |
2128 | { |
2129 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2130 | int bat_lvl, status; |
2131 | u32 state; |
2132 | int ret; |
2133 | int tmp; |
2134 | |
2135 | ret = toshiba_sleep_functions_status_get(dev: toshiba, mode: &state); |
2136 | if (ret < 0) |
2137 | return ret; |
2138 | |
2139 | /* Determine the status: 0x4 - Enabled | 0x1 - Disabled */ |
2140 | tmp = state & SCI_USB_CHARGE_BAT_MASK; |
2141 | status = (tmp == 0x4) ? 1 : 0; |
2142 | /* Determine the battery level set */ |
2143 | bat_lvl = state >> HCI_MISC_SHIFT; |
2144 | |
2145 | return sprintf(buf, fmt: "%d %d\n" , status, bat_lvl); |
2146 | } |
2147 | |
2148 | static ssize_t sleep_functions_on_battery_store(struct device *dev, |
2149 | struct device_attribute *attr, |
2150 | const char *buf, size_t count) |
2151 | { |
2152 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2153 | u32 status; |
2154 | int value; |
2155 | int ret; |
2156 | int tmp; |
2157 | |
2158 | ret = kstrtoint(s: buf, base: 0, res: &value); |
2159 | if (ret) |
2160 | return ret; |
2161 | |
2162 | /* |
2163 | * Set the status of the function: |
2164 | * 0 - Disabled |
2165 | * 1-100 - Enabled |
2166 | */ |
2167 | if (value < 0 || value > 100) |
2168 | return -EINVAL; |
2169 | |
2170 | if (value == 0) { |
2171 | tmp = toshiba->usbsc_bat_level << HCI_MISC_SHIFT; |
2172 | status = tmp | SCI_USB_CHARGE_BAT_LVL_OFF; |
2173 | } else { |
2174 | tmp = value << HCI_MISC_SHIFT; |
2175 | status = tmp | SCI_USB_CHARGE_BAT_LVL_ON; |
2176 | } |
2177 | ret = toshiba_sleep_functions_status_set(dev: toshiba, mode: status); |
2178 | if (ret < 0) |
2179 | return ret; |
2180 | |
2181 | toshiba->usbsc_bat_level = status >> HCI_MISC_SHIFT; |
2182 | |
2183 | return count; |
2184 | } |
2185 | static DEVICE_ATTR_RW(sleep_functions_on_battery); |
2186 | |
2187 | static ssize_t usb_rapid_charge_show(struct device *dev, |
2188 | struct device_attribute *attr, char *buf) |
2189 | { |
2190 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2191 | u32 state; |
2192 | int ret; |
2193 | |
2194 | ret = toshiba_usb_rapid_charge_get(dev: toshiba, state: &state); |
2195 | if (ret < 0) |
2196 | return ret; |
2197 | |
2198 | return sprintf(buf, fmt: "%d\n" , state); |
2199 | } |
2200 | |
2201 | static ssize_t usb_rapid_charge_store(struct device *dev, |
2202 | struct device_attribute *attr, |
2203 | const char *buf, size_t count) |
2204 | { |
2205 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2206 | int state; |
2207 | int ret; |
2208 | |
2209 | ret = kstrtoint(s: buf, base: 0, res: &state); |
2210 | if (ret) |
2211 | return ret; |
2212 | if (state != 0 && state != 1) |
2213 | return -EINVAL; |
2214 | |
2215 | ret = toshiba_usb_rapid_charge_set(dev: toshiba, state); |
2216 | if (ret) |
2217 | return ret; |
2218 | |
2219 | return count; |
2220 | } |
2221 | static DEVICE_ATTR_RW(usb_rapid_charge); |
2222 | |
2223 | static ssize_t usb_sleep_music_show(struct device *dev, |
2224 | struct device_attribute *attr, char *buf) |
2225 | { |
2226 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2227 | u32 state; |
2228 | int ret; |
2229 | |
2230 | ret = toshiba_usb_sleep_music_get(dev: toshiba, state: &state); |
2231 | if (ret < 0) |
2232 | return ret; |
2233 | |
2234 | return sprintf(buf, fmt: "%d\n" , state); |
2235 | } |
2236 | |
2237 | static ssize_t usb_sleep_music_store(struct device *dev, |
2238 | struct device_attribute *attr, |
2239 | const char *buf, size_t count) |
2240 | { |
2241 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2242 | int state; |
2243 | int ret; |
2244 | |
2245 | ret = kstrtoint(s: buf, base: 0, res: &state); |
2246 | if (ret) |
2247 | return ret; |
2248 | if (state != 0 && state != 1) |
2249 | return -EINVAL; |
2250 | |
2251 | ret = toshiba_usb_sleep_music_set(dev: toshiba, state); |
2252 | if (ret) |
2253 | return ret; |
2254 | |
2255 | return count; |
2256 | } |
2257 | static DEVICE_ATTR_RW(usb_sleep_music); |
2258 | |
2259 | static ssize_t kbd_function_keys_show(struct device *dev, |
2260 | struct device_attribute *attr, char *buf) |
2261 | { |
2262 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2263 | int mode; |
2264 | int ret; |
2265 | |
2266 | ret = toshiba_function_keys_get(dev: toshiba, mode: &mode); |
2267 | if (ret < 0) |
2268 | return ret; |
2269 | |
2270 | return sprintf(buf, fmt: "%d\n" , mode); |
2271 | } |
2272 | |
2273 | static ssize_t kbd_function_keys_store(struct device *dev, |
2274 | struct device_attribute *attr, |
2275 | const char *buf, size_t count) |
2276 | { |
2277 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2278 | int mode; |
2279 | int ret; |
2280 | |
2281 | ret = kstrtoint(s: buf, base: 0, res: &mode); |
2282 | if (ret) |
2283 | return ret; |
2284 | /* |
2285 | * Check for the function keys mode where: |
2286 | * 0 - Normal operation (F{1-12} as usual and hotkeys via FN-F{1-12}) |
2287 | * 1 - Special functions (Opposite of the above setting) |
2288 | */ |
2289 | if (mode != 0 && mode != 1) |
2290 | return -EINVAL; |
2291 | |
2292 | ret = toshiba_function_keys_set(dev: toshiba, mode); |
2293 | if (ret) |
2294 | return ret; |
2295 | |
2296 | pr_info("Reboot for changes to KBD Function Keys to take effect" ); |
2297 | |
2298 | return count; |
2299 | } |
2300 | static DEVICE_ATTR_RW(kbd_function_keys); |
2301 | |
2302 | static ssize_t panel_power_on_show(struct device *dev, |
2303 | struct device_attribute *attr, char *buf) |
2304 | { |
2305 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2306 | u32 state; |
2307 | int ret; |
2308 | |
2309 | ret = toshiba_panel_power_on_get(dev: toshiba, state: &state); |
2310 | if (ret < 0) |
2311 | return ret; |
2312 | |
2313 | return sprintf(buf, fmt: "%d\n" , state); |
2314 | } |
2315 | |
2316 | static ssize_t panel_power_on_store(struct device *dev, |
2317 | struct device_attribute *attr, |
2318 | const char *buf, size_t count) |
2319 | { |
2320 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2321 | int state; |
2322 | int ret; |
2323 | |
2324 | ret = kstrtoint(s: buf, base: 0, res: &state); |
2325 | if (ret) |
2326 | return ret; |
2327 | if (state != 0 && state != 1) |
2328 | return -EINVAL; |
2329 | |
2330 | ret = toshiba_panel_power_on_set(dev: toshiba, state); |
2331 | if (ret) |
2332 | return ret; |
2333 | |
2334 | pr_info("Reboot for changes to Panel Power ON to take effect" ); |
2335 | |
2336 | return count; |
2337 | } |
2338 | static DEVICE_ATTR_RW(panel_power_on); |
2339 | |
2340 | static ssize_t usb_three_show(struct device *dev, |
2341 | struct device_attribute *attr, char *buf) |
2342 | { |
2343 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2344 | u32 state; |
2345 | int ret; |
2346 | |
2347 | ret = toshiba_usb_three_get(dev: toshiba, state: &state); |
2348 | if (ret < 0) |
2349 | return ret; |
2350 | |
2351 | return sprintf(buf, fmt: "%d\n" , state); |
2352 | } |
2353 | |
2354 | static ssize_t usb_three_store(struct device *dev, |
2355 | struct device_attribute *attr, |
2356 | const char *buf, size_t count) |
2357 | { |
2358 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2359 | int state; |
2360 | int ret; |
2361 | |
2362 | ret = kstrtoint(s: buf, base: 0, res: &state); |
2363 | if (ret) |
2364 | return ret; |
2365 | /* |
2366 | * Check for USB 3 mode where: |
2367 | * 0 - Disabled (Acts like a USB 2 port, saving power) |
2368 | * 1 - Enabled |
2369 | */ |
2370 | if (state != 0 && state != 1) |
2371 | return -EINVAL; |
2372 | |
2373 | ret = toshiba_usb_three_set(dev: toshiba, state); |
2374 | if (ret) |
2375 | return ret; |
2376 | |
2377 | pr_info("Reboot for changes to USB 3 to take effect" ); |
2378 | |
2379 | return count; |
2380 | } |
2381 | static DEVICE_ATTR_RW(usb_three); |
2382 | |
2383 | static ssize_t cooling_method_show(struct device *dev, |
2384 | struct device_attribute *attr, char *buf) |
2385 | { |
2386 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2387 | int state; |
2388 | int ret; |
2389 | |
2390 | ret = toshiba_cooling_method_get(dev: toshiba, state: &state); |
2391 | if (ret < 0) |
2392 | return ret; |
2393 | |
2394 | return sprintf(buf, fmt: "%d %d\n" , state, toshiba->max_cooling_method); |
2395 | } |
2396 | |
2397 | static ssize_t cooling_method_store(struct device *dev, |
2398 | struct device_attribute *attr, |
2399 | const char *buf, size_t count) |
2400 | { |
2401 | struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); |
2402 | int state; |
2403 | int ret; |
2404 | |
2405 | ret = kstrtoint(s: buf, base: 0, res: &state); |
2406 | if (ret) |
2407 | return ret; |
2408 | |
2409 | /* |
2410 | * Check for supported values |
2411 | * Depending on the laptop model, some only support these two: |
2412 | * 0 - Maximum Performance |
2413 | * 1 - Battery Optimized |
2414 | * |
2415 | * While some others support all three methods: |
2416 | * 0 - Maximum Performance |
2417 | * 1 - Performance |
2418 | * 2 - Battery Optimized |
2419 | */ |
2420 | if (state < 0 || state > toshiba->max_cooling_method) |
2421 | return -EINVAL; |
2422 | |
2423 | ret = toshiba_cooling_method_set(dev: toshiba, state); |
2424 | if (ret) |
2425 | return ret; |
2426 | |
2427 | return count; |
2428 | } |
2429 | static DEVICE_ATTR_RW(cooling_method); |
2430 | |
2431 | static struct attribute *toshiba_attributes[] = { |
2432 | &dev_attr_version.attr, |
2433 | &dev_attr_fan.attr, |
2434 | &dev_attr_kbd_backlight_mode.attr, |
2435 | &dev_attr_kbd_type.attr, |
2436 | &dev_attr_available_kbd_modes.attr, |
2437 | &dev_attr_kbd_backlight_timeout.attr, |
2438 | &dev_attr_touchpad.attr, |
2439 | &dev_attr_usb_sleep_charge.attr, |
2440 | &dev_attr_sleep_functions_on_battery.attr, |
2441 | &dev_attr_usb_rapid_charge.attr, |
2442 | &dev_attr_usb_sleep_music.attr, |
2443 | &dev_attr_kbd_function_keys.attr, |
2444 | &dev_attr_panel_power_on.attr, |
2445 | &dev_attr_usb_three.attr, |
2446 | &dev_attr_cooling_method.attr, |
2447 | NULL, |
2448 | }; |
2449 | |
2450 | static umode_t toshiba_sysfs_is_visible(struct kobject *kobj, |
2451 | struct attribute *attr, int idx) |
2452 | { |
2453 | struct device *dev = kobj_to_dev(kobj); |
2454 | struct toshiba_acpi_dev *drv = dev_get_drvdata(dev); |
2455 | bool exists = true; |
2456 | |
2457 | if (attr == &dev_attr_fan.attr) |
2458 | exists = (drv->fan_supported) ? true : false; |
2459 | else if (attr == &dev_attr_kbd_backlight_mode.attr) |
2460 | exists = (drv->kbd_illum_supported) ? true : false; |
2461 | else if (attr == &dev_attr_kbd_backlight_timeout.attr) |
2462 | exists = (drv->kbd_mode == SCI_KBD_MODE_AUTO) ? true : false; |
2463 | else if (attr == &dev_attr_touchpad.attr) |
2464 | exists = (drv->touchpad_supported) ? true : false; |
2465 | else if (attr == &dev_attr_usb_sleep_charge.attr) |
2466 | exists = (drv->usb_sleep_charge_supported) ? true : false; |
2467 | else if (attr == &dev_attr_sleep_functions_on_battery.attr) |
2468 | exists = (drv->usb_sleep_charge_supported) ? true : false; |
2469 | else if (attr == &dev_attr_usb_rapid_charge.attr) |
2470 | exists = (drv->usb_rapid_charge_supported) ? true : false; |
2471 | else if (attr == &dev_attr_usb_sleep_music.attr) |
2472 | exists = (drv->usb_sleep_music_supported) ? true : false; |
2473 | else if (attr == &dev_attr_kbd_function_keys.attr) |
2474 | exists = (drv->kbd_function_keys_supported) ? true : false; |
2475 | else if (attr == &dev_attr_panel_power_on.attr) |
2476 | exists = (drv->panel_power_on_supported) ? true : false; |
2477 | else if (attr == &dev_attr_usb_three.attr) |
2478 | exists = (drv->usb_three_supported) ? true : false; |
2479 | else if (attr == &dev_attr_cooling_method.attr) |
2480 | exists = (drv->cooling_method_supported) ? true : false; |
2481 | |
2482 | return exists ? attr->mode : 0; |
2483 | } |
2484 | |
2485 | static const struct attribute_group toshiba_attr_group = { |
2486 | .is_visible = toshiba_sysfs_is_visible, |
2487 | .attrs = toshiba_attributes, |
2488 | }; |
2489 | |
2490 | static void toshiba_acpi_kbd_bl_work(struct work_struct *work) |
2491 | { |
2492 | /* Update the sysfs entries */ |
2493 | if (sysfs_update_group(kobj: &toshiba_acpi->acpi_dev->dev.kobj, |
2494 | grp: &toshiba_attr_group)) |
2495 | pr_err("Unable to update sysfs entries\n" ); |
2496 | |
2497 | /* Notify LED subsystem about keyboard backlight change */ |
2498 | if (toshiba_acpi->kbd_type == 2 && |
2499 | toshiba_acpi->kbd_mode != SCI_KBD_MODE_AUTO) |
2500 | led_classdev_notify_brightness_hw_changed(led_cdev: &toshiba_acpi->kbd_led, |
2501 | brightness: (toshiba_acpi->kbd_mode == SCI_KBD_MODE_ON) ? |
2502 | LED_FULL : LED_OFF); |
2503 | |
2504 | /* Emulate the keyboard backlight event */ |
2505 | acpi_bus_generate_netlink_event(toshiba_acpi->acpi_dev->pnp.device_class, |
2506 | dev_name(dev: &toshiba_acpi->acpi_dev->dev), |
2507 | 0x92, 0); |
2508 | } |
2509 | |
2510 | /* |
2511 | * IIO device |
2512 | */ |
2513 | |
2514 | enum toshiba_iio_accel_chan { |
2515 | AXIS_X, |
2516 | AXIS_Y, |
2517 | AXIS_Z |
2518 | }; |
2519 | |
2520 | static int toshiba_iio_accel_get_axis(enum toshiba_iio_accel_chan chan) |
2521 | { |
2522 | u32 xyval, zval; |
2523 | int ret; |
2524 | |
2525 | ret = toshiba_accelerometer_get(dev: toshiba_acpi, xy: &xyval, z: &zval); |
2526 | if (ret < 0) |
2527 | return ret; |
2528 | |
2529 | switch (chan) { |
2530 | case AXIS_X: |
2531 | return xyval & HCI_ACCEL_DIRECTION_MASK ? |
2532 | -(xyval & HCI_ACCEL_MASK) : xyval & HCI_ACCEL_MASK; |
2533 | case AXIS_Y: |
2534 | return (xyval >> HCI_MISC_SHIFT) & HCI_ACCEL_DIRECTION_MASK ? |
2535 | -((xyval >> HCI_MISC_SHIFT) & HCI_ACCEL_MASK) : |
2536 | (xyval >> HCI_MISC_SHIFT) & HCI_ACCEL_MASK; |
2537 | case AXIS_Z: |
2538 | return zval & HCI_ACCEL_DIRECTION_MASK ? |
2539 | -(zval & HCI_ACCEL_MASK) : zval & HCI_ACCEL_MASK; |
2540 | } |
2541 | |
2542 | return ret; |
2543 | } |
2544 | |
2545 | static int toshiba_iio_accel_read_raw(struct iio_dev *indio_dev, |
2546 | struct iio_chan_spec const *chan, |
2547 | int *val, int *val2, long mask) |
2548 | { |
2549 | int ret; |
2550 | |
2551 | switch (mask) { |
2552 | case IIO_CHAN_INFO_RAW: |
2553 | ret = toshiba_iio_accel_get_axis(chan: chan->channel); |
2554 | if (ret == -EIO || ret == -ENODEV) |
2555 | return ret; |
2556 | |
2557 | *val = ret; |
2558 | |
2559 | return IIO_VAL_INT; |
2560 | } |
2561 | |
2562 | return -EINVAL; |
2563 | } |
2564 | |
2565 | #define TOSHIBA_IIO_ACCEL_CHANNEL(axis, chan) { \ |
2566 | .type = IIO_ACCEL, \ |
2567 | .modified = 1, \ |
2568 | .channel = chan, \ |
2569 | .channel2 = IIO_MOD_##axis, \ |
2570 | .output = 1, \ |
2571 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
2572 | } |
2573 | |
2574 | static const struct iio_chan_spec toshiba_iio_accel_channels[] = { |
2575 | TOSHIBA_IIO_ACCEL_CHANNEL(X, AXIS_X), |
2576 | TOSHIBA_IIO_ACCEL_CHANNEL(Y, AXIS_Y), |
2577 | TOSHIBA_IIO_ACCEL_CHANNEL(Z, AXIS_Z), |
2578 | }; |
2579 | |
2580 | static const struct iio_info toshiba_iio_accel_info = { |
2581 | .read_raw = &toshiba_iio_accel_read_raw, |
2582 | }; |
2583 | |
2584 | /* |
2585 | * Misc device |
2586 | */ |
2587 | static int toshiba_acpi_smm_bridge(SMMRegisters *regs) |
2588 | { |
2589 | u32 in[TCI_WORDS] = { regs->eax, regs->ebx, regs->ecx, |
2590 | regs->edx, regs->esi, regs->edi }; |
2591 | u32 out[TCI_WORDS]; |
2592 | acpi_status status; |
2593 | |
2594 | status = tci_raw(dev: toshiba_acpi, in, out); |
2595 | if (ACPI_FAILURE(status)) { |
2596 | pr_err("ACPI call to query SMM registers failed\n" ); |
2597 | return -EIO; |
2598 | } |
2599 | |
2600 | /* Fillout the SMM struct with the TCI call results */ |
2601 | regs->eax = out[0]; |
2602 | regs->ebx = out[1]; |
2603 | regs->ecx = out[2]; |
2604 | regs->edx = out[3]; |
2605 | regs->esi = out[4]; |
2606 | regs->edi = out[5]; |
2607 | |
2608 | return 0; |
2609 | } |
2610 | |
2611 | static long toshiba_acpi_ioctl(struct file *fp, unsigned int cmd, |
2612 | unsigned long arg) |
2613 | { |
2614 | SMMRegisters __user *argp = (SMMRegisters __user *)arg; |
2615 | SMMRegisters regs; |
2616 | int ret; |
2617 | |
2618 | if (!argp) |
2619 | return -EINVAL; |
2620 | |
2621 | switch (cmd) { |
2622 | case TOSH_SMM: |
2623 | if (copy_from_user(to: ®s, from: argp, n: sizeof(SMMRegisters))) |
2624 | return -EFAULT; |
2625 | ret = toshiba_acpi_smm_bridge(regs: ®s); |
2626 | if (ret) |
2627 | return ret; |
2628 | if (copy_to_user(to: argp, from: ®s, n: sizeof(SMMRegisters))) |
2629 | return -EFAULT; |
2630 | break; |
2631 | case TOSHIBA_ACPI_SCI: |
2632 | if (copy_from_user(to: ®s, from: argp, n: sizeof(SMMRegisters))) |
2633 | return -EFAULT; |
2634 | /* Ensure we are being called with a SCI_{GET, SET} register */ |
2635 | if (regs.eax != SCI_GET && regs.eax != SCI_SET) |
2636 | return -EINVAL; |
2637 | if (!sci_open(dev: toshiba_acpi)) |
2638 | return -EIO; |
2639 | ret = toshiba_acpi_smm_bridge(regs: ®s); |
2640 | sci_close(dev: toshiba_acpi); |
2641 | if (ret) |
2642 | return ret; |
2643 | if (copy_to_user(to: argp, from: ®s, n: sizeof(SMMRegisters))) |
2644 | return -EFAULT; |
2645 | break; |
2646 | default: |
2647 | return -EINVAL; |
2648 | } |
2649 | |
2650 | return 0; |
2651 | } |
2652 | |
2653 | static const struct file_operations toshiba_acpi_fops = { |
2654 | .owner = THIS_MODULE, |
2655 | .unlocked_ioctl = toshiba_acpi_ioctl, |
2656 | .llseek = noop_llseek, |
2657 | }; |
2658 | |
2659 | /* |
2660 | * WWAN RFKill handlers |
2661 | */ |
2662 | static int toshiba_acpi_wwan_set_block(void *data, bool blocked) |
2663 | { |
2664 | struct toshiba_acpi_dev *dev = data; |
2665 | int ret; |
2666 | |
2667 | ret = toshiba_wireless_status(dev); |
2668 | if (ret) |
2669 | return ret; |
2670 | |
2671 | if (!dev->killswitch) |
2672 | return 0; |
2673 | |
2674 | return toshiba_wwan_set(dev, state: !blocked); |
2675 | } |
2676 | |
2677 | static void toshiba_acpi_wwan_poll(struct rfkill *rfkill, void *data) |
2678 | { |
2679 | struct toshiba_acpi_dev *dev = data; |
2680 | |
2681 | if (toshiba_wireless_status(dev)) |
2682 | return; |
2683 | |
2684 | rfkill_set_hw_state(rfkill: dev->wwan_rfk, blocked: !dev->killswitch); |
2685 | } |
2686 | |
2687 | static const struct rfkill_ops wwan_rfk_ops = { |
2688 | .set_block = toshiba_acpi_wwan_set_block, |
2689 | .poll = toshiba_acpi_wwan_poll, |
2690 | }; |
2691 | |
2692 | static int toshiba_acpi_setup_wwan_rfkill(struct toshiba_acpi_dev *dev) |
2693 | { |
2694 | int ret = toshiba_wireless_status(dev); |
2695 | |
2696 | if (ret) |
2697 | return ret; |
2698 | |
2699 | dev->wwan_rfk = rfkill_alloc(name: "Toshiba WWAN" , |
2700 | parent: &dev->acpi_dev->dev, |
2701 | type: RFKILL_TYPE_WWAN, |
2702 | ops: &wwan_rfk_ops, |
2703 | ops_data: dev); |
2704 | if (!dev->wwan_rfk) { |
2705 | pr_err("Unable to allocate WWAN rfkill device\n" ); |
2706 | return -ENOMEM; |
2707 | } |
2708 | |
2709 | rfkill_set_hw_state(rfkill: dev->wwan_rfk, blocked: !dev->killswitch); |
2710 | |
2711 | ret = rfkill_register(rfkill: dev->wwan_rfk); |
2712 | if (ret) { |
2713 | pr_err("Unable to register WWAN rfkill device\n" ); |
2714 | rfkill_destroy(rfkill: dev->wwan_rfk); |
2715 | } |
2716 | |
2717 | return ret; |
2718 | } |
2719 | |
2720 | /* |
2721 | * Hotkeys |
2722 | */ |
2723 | static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev) |
2724 | { |
2725 | acpi_status status; |
2726 | u32 result; |
2727 | |
2728 | status = acpi_evaluate_object(object: dev->acpi_dev->handle, |
2729 | pathname: "ENAB" , NULL, NULL); |
2730 | if (ACPI_FAILURE(status)) |
2731 | return -ENODEV; |
2732 | |
2733 | /* |
2734 | * Enable the "Special Functions" mode only if they are |
2735 | * supported and if they are activated. |
2736 | */ |
2737 | if (dev->kbd_function_keys_supported && dev->special_functions) |
2738 | result = hci_write(dev, HCI_HOTKEY_EVENT, |
2739 | HCI_HOTKEY_SPECIAL_FUNCTIONS); |
2740 | else |
2741 | result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE); |
2742 | |
2743 | if (result == TOS_FAILURE) |
2744 | return -EIO; |
2745 | else if (result == TOS_NOT_SUPPORTED) |
2746 | return -ENODEV; |
2747 | |
2748 | return 0; |
2749 | } |
2750 | |
2751 | static bool toshiba_acpi_i8042_filter(unsigned char data, unsigned char str, |
2752 | struct serio *port) |
2753 | { |
2754 | if (str & I8042_STR_AUXDATA) |
2755 | return false; |
2756 | |
2757 | if (unlikely(data == 0xe0)) |
2758 | return false; |
2759 | |
2760 | if ((data & 0x7f) == TOS1900_FN_SCAN) { |
2761 | schedule_work(work: &toshiba_acpi->hotkey_work); |
2762 | return true; |
2763 | } |
2764 | |
2765 | return false; |
2766 | } |
2767 | |
2768 | static void toshiba_acpi_hotkey_work(struct work_struct *work) |
2769 | { |
2770 | acpi_handle ec_handle = ec_get_handle(); |
2771 | acpi_status status; |
2772 | |
2773 | if (!ec_handle) |
2774 | return; |
2775 | |
2776 | status = acpi_evaluate_object(object: ec_handle, pathname: "NTFY" , NULL, NULL); |
2777 | if (ACPI_FAILURE(status)) |
2778 | pr_err("ACPI NTFY method execution failed\n" ); |
2779 | } |
2780 | |
2781 | /* |
2782 | * Returns hotkey scancode, or < 0 on failure. |
2783 | */ |
2784 | static int toshiba_acpi_query_hotkey(struct toshiba_acpi_dev *dev) |
2785 | { |
2786 | unsigned long long value; |
2787 | acpi_status status; |
2788 | |
2789 | status = acpi_evaluate_integer(handle: dev->acpi_dev->handle, pathname: "INFO" , |
2790 | NULL, data: &value); |
2791 | if (ACPI_FAILURE(status)) { |
2792 | pr_err("ACPI INFO method execution failed\n" ); |
2793 | return -EIO; |
2794 | } |
2795 | |
2796 | return value; |
2797 | } |
2798 | |
2799 | static void toshiba_acpi_report_hotkey(struct toshiba_acpi_dev *dev, |
2800 | int scancode) |
2801 | { |
2802 | if (scancode == 0x100) |
2803 | return; |
2804 | |
2805 | /* Act on key press; ignore key release */ |
2806 | if (scancode & 0x80) |
2807 | return; |
2808 | |
2809 | if (!sparse_keymap_report_event(dev: dev->hotkey_dev, code: scancode, value: 1, autorelease: true)) |
2810 | pr_info("Unknown key %x\n" , scancode); |
2811 | } |
2812 | |
2813 | static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev) |
2814 | { |
2815 | if (dev->info_supported) { |
2816 | int scancode = toshiba_acpi_query_hotkey(dev); |
2817 | |
2818 | if (scancode < 0) { |
2819 | pr_err("Failed to query hotkey event\n" ); |
2820 | } else if (scancode != 0) { |
2821 | toshiba_acpi_report_hotkey(dev, scancode); |
2822 | dev->key_event_valid = 1; |
2823 | dev->last_key_event = scancode; |
2824 | } |
2825 | } else if (dev->system_event_supported) { |
2826 | u32 result; |
2827 | u32 value; |
2828 | int retries = 3; |
2829 | |
2830 | do { |
2831 | result = hci_read(dev, HCI_SYSTEM_EVENT, out1: &value); |
2832 | switch (result) { |
2833 | case TOS_SUCCESS: |
2834 | toshiba_acpi_report_hotkey(dev, scancode: (int)value); |
2835 | dev->key_event_valid = 1; |
2836 | dev->last_key_event = value; |
2837 | break; |
2838 | case TOS_NOT_SUPPORTED: |
2839 | /* |
2840 | * This is a workaround for an unresolved |
2841 | * issue on some machines where system events |
2842 | * sporadically become disabled. |
2843 | */ |
2844 | result = hci_write(dev, HCI_SYSTEM_EVENT, in1: 1); |
2845 | if (result == TOS_SUCCESS) |
2846 | pr_notice("Re-enabled hotkeys\n" ); |
2847 | fallthrough; |
2848 | default: |
2849 | retries--; |
2850 | break; |
2851 | } |
2852 | } while (retries && result != TOS_FIFO_EMPTY); |
2853 | } |
2854 | } |
2855 | |
2856 | static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev) |
2857 | { |
2858 | const struct key_entry *keymap = toshiba_acpi_keymap; |
2859 | acpi_handle ec_handle; |
2860 | int error; |
2861 | |
2862 | if (disable_hotkeys) { |
2863 | pr_info("Hotkeys disabled by module parameter\n" ); |
2864 | return 0; |
2865 | } |
2866 | |
2867 | if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) { |
2868 | pr_info("WMI event detected, hotkeys will not be monitored\n" ); |
2869 | return 0; |
2870 | } |
2871 | |
2872 | error = toshiba_acpi_enable_hotkeys(dev); |
2873 | if (error) |
2874 | return error; |
2875 | |
2876 | if (toshiba_hotkey_event_type_get(dev, type: &dev->hotkey_event_type)) |
2877 | pr_notice("Unable to query Hotkey Event Type\n" ); |
2878 | |
2879 | dev->hotkey_dev = input_allocate_device(); |
2880 | if (!dev->hotkey_dev) |
2881 | return -ENOMEM; |
2882 | |
2883 | dev->hotkey_dev->name = "Toshiba input device" ; |
2884 | dev->hotkey_dev->phys = "toshiba_acpi/input0" ; |
2885 | dev->hotkey_dev->id.bustype = BUS_HOST; |
2886 | dev->hotkey_dev->dev.parent = &dev->acpi_dev->dev; |
2887 | |
2888 | if (dev->hotkey_event_type == HCI_SYSTEM_TYPE1 || |
2889 | !dev->kbd_function_keys_supported) |
2890 | keymap = toshiba_acpi_keymap; |
2891 | else if (dev->hotkey_event_type == HCI_SYSTEM_TYPE2 || |
2892 | dev->kbd_function_keys_supported) |
2893 | keymap = toshiba_acpi_alt_keymap; |
2894 | else |
2895 | pr_info("Unknown event type received %x\n" , |
2896 | dev->hotkey_event_type); |
2897 | error = sparse_keymap_setup(dev: dev->hotkey_dev, keymap, NULL); |
2898 | if (error) |
2899 | goto err_free_dev; |
2900 | |
2901 | /* |
2902 | * For some machines the SCI responsible for providing hotkey |
2903 | * notification doesn't fire. We can trigger the notification |
2904 | * whenever the Fn key is pressed using the NTFY method, if |
2905 | * supported, so if it's present set up an i8042 key filter |
2906 | * for this purpose. |
2907 | */ |
2908 | ec_handle = ec_get_handle(); |
2909 | if (ec_handle && acpi_has_method(handle: ec_handle, name: "NTFY" )) { |
2910 | INIT_WORK(&dev->hotkey_work, toshiba_acpi_hotkey_work); |
2911 | |
2912 | error = i8042_install_filter(filter: toshiba_acpi_i8042_filter); |
2913 | if (error) { |
2914 | pr_err("Error installing key filter\n" ); |
2915 | goto err_free_dev; |
2916 | } |
2917 | |
2918 | dev->ntfy_supported = 1; |
2919 | } |
2920 | |
2921 | /* |
2922 | * Determine hotkey query interface. Prefer using the INFO |
2923 | * method when it is available. |
2924 | */ |
2925 | if (acpi_has_method(handle: dev->acpi_dev->handle, name: "INFO" )) |
2926 | dev->info_supported = 1; |
2927 | else if (hci_write(dev, HCI_SYSTEM_EVENT, in1: 1) == TOS_SUCCESS) |
2928 | dev->system_event_supported = 1; |
2929 | |
2930 | if (!dev->info_supported && !dev->system_event_supported) { |
2931 | pr_warn("No hotkey query interface found\n" ); |
2932 | error = -EINVAL; |
2933 | goto err_remove_filter; |
2934 | } |
2935 | |
2936 | error = input_register_device(dev->hotkey_dev); |
2937 | if (error) { |
2938 | pr_info("Unable to register input device\n" ); |
2939 | goto err_remove_filter; |
2940 | } |
2941 | |
2942 | return 0; |
2943 | |
2944 | err_remove_filter: |
2945 | if (dev->ntfy_supported) |
2946 | i8042_remove_filter(filter: toshiba_acpi_i8042_filter); |
2947 | err_free_dev: |
2948 | input_free_device(dev: dev->hotkey_dev); |
2949 | dev->hotkey_dev = NULL; |
2950 | return error; |
2951 | } |
2952 | |
2953 | static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev) |
2954 | { |
2955 | struct backlight_properties props; |
2956 | int brightness; |
2957 | int ret; |
2958 | |
2959 | /* |
2960 | * Some machines don't support the backlight methods at all, and |
2961 | * others support it read-only. Either of these is pretty useless, |
2962 | * so only register the backlight device if the backlight method |
2963 | * supports both reads and writes. |
2964 | */ |
2965 | brightness = __get_lcd_brightness(dev); |
2966 | if (brightness < 0) |
2967 | return 0; |
2968 | /* |
2969 | * If transflective backlight is supported and the brightness is zero |
2970 | * (lowest brightness level), the set_lcd_brightness function will |
2971 | * activate the transflective backlight, making the LCD appear to be |
2972 | * turned off, simply increment the brightness level to avoid that. |
2973 | */ |
2974 | if (dev->tr_backlight_supported && brightness == 0) |
2975 | brightness++; |
2976 | ret = set_lcd_brightness(dev, value: brightness); |
2977 | if (ret) { |
2978 | pr_debug("Backlight method is read-only, disabling backlight support\n" ); |
2979 | return 0; |
2980 | } |
2981 | |
2982 | if (acpi_video_get_backlight_type() != acpi_backlight_vendor) |
2983 | return 0; |
2984 | |
2985 | memset(&props, 0, sizeof(props)); |
2986 | props.type = BACKLIGHT_PLATFORM; |
2987 | props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; |
2988 | |
2989 | /* Adding an extra level and having 0 change to transflective mode */ |
2990 | if (dev->tr_backlight_supported) |
2991 | props.max_brightness++; |
2992 | |
2993 | dev->backlight_dev = backlight_device_register(name: "toshiba" , |
2994 | dev: &dev->acpi_dev->dev, |
2995 | devdata: dev, |
2996 | ops: &toshiba_backlight_data, |
2997 | props: &props); |
2998 | if (IS_ERR(ptr: dev->backlight_dev)) { |
2999 | ret = PTR_ERR(ptr: dev->backlight_dev); |
3000 | pr_err("Could not register toshiba backlight device\n" ); |
3001 | dev->backlight_dev = NULL; |
3002 | return ret; |
3003 | } |
3004 | |
3005 | dev->backlight_dev->props.brightness = brightness; |
3006 | return 0; |
3007 | } |
3008 | |
3009 | /* HWMON support for fan */ |
3010 | #if IS_ENABLED(CONFIG_HWMON) |
3011 | static umode_t toshiba_acpi_hwmon_is_visible(const void *drvdata, |
3012 | enum hwmon_sensor_types type, |
3013 | u32 attr, int channel) |
3014 | { |
3015 | return 0444; |
3016 | } |
3017 | |
3018 | static int toshiba_acpi_hwmon_read(struct device *dev, enum hwmon_sensor_types type, |
3019 | u32 attr, int channel, long *val) |
3020 | { |
3021 | /* |
3022 | * There is only a single channel and single attribute (for the |
3023 | * fan) at this point. |
3024 | * This can be replaced with more advanced logic in the future, |
3025 | * should the need arise. |
3026 | */ |
3027 | if (type == hwmon_fan && channel == 0 && attr == hwmon_fan_input) { |
3028 | u32 value; |
3029 | int ret; |
3030 | |
3031 | ret = get_fan_rpm(dev: toshiba_acpi, rpm: &value); |
3032 | if (ret) |
3033 | return ret; |
3034 | |
3035 | *val = value; |
3036 | return 0; |
3037 | } |
3038 | return -EOPNOTSUPP; |
3039 | } |
3040 | |
3041 | static const struct hwmon_channel_info * const toshiba_acpi_hwmon_info[] = { |
3042 | HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT), |
3043 | NULL |
3044 | }; |
3045 | |
3046 | static const struct hwmon_ops toshiba_acpi_hwmon_ops = { |
3047 | .is_visible = toshiba_acpi_hwmon_is_visible, |
3048 | .read = toshiba_acpi_hwmon_read, |
3049 | }; |
3050 | |
3051 | static const struct hwmon_chip_info toshiba_acpi_hwmon_chip_info = { |
3052 | .ops = &toshiba_acpi_hwmon_ops, |
3053 | .info = toshiba_acpi_hwmon_info, |
3054 | }; |
3055 | #endif |
3056 | |
3057 | /* ACPI battery hooking */ |
3058 | static ssize_t charge_control_end_threshold_show(struct device *device, |
3059 | struct device_attribute *attr, |
3060 | char *buf) |
3061 | { |
3062 | u32 state; |
3063 | int status; |
3064 | |
3065 | if (toshiba_acpi == NULL) { |
3066 | pr_err("Toshiba ACPI object invalid\n" ); |
3067 | return -ENODEV; |
3068 | } |
3069 | |
3070 | status = toshiba_battery_charge_mode_get(dev: toshiba_acpi, state: &state); |
3071 | |
3072 | if (status != 0) |
3073 | return status; |
3074 | |
3075 | if (state == 1) |
3076 | return sprintf(buf, fmt: "80\n" ); |
3077 | else |
3078 | return sprintf(buf, fmt: "100\n" ); |
3079 | } |
3080 | |
3081 | static ssize_t charge_control_end_threshold_store(struct device *dev, |
3082 | struct device_attribute *attr, |
3083 | const char *buf, |
3084 | size_t count) |
3085 | { |
3086 | u32 value; |
3087 | int rval; |
3088 | |
3089 | if (toshiba_acpi == NULL) { |
3090 | pr_err("Toshiba ACPI object invalid\n" ); |
3091 | return -ENODEV; |
3092 | } |
3093 | |
3094 | rval = kstrtou32(s: buf, base: 10, res: &value); |
3095 | if (rval) |
3096 | return rval; |
3097 | |
3098 | if (value < 1 || value > 100) |
3099 | return -EINVAL; |
3100 | rval = toshiba_battery_charge_mode_set(dev: toshiba_acpi, |
3101 | state: (value < 90) ? 1 : 0); |
3102 | if (rval < 0) |
3103 | return rval; |
3104 | else |
3105 | return count; |
3106 | } |
3107 | |
3108 | static DEVICE_ATTR_RW(charge_control_end_threshold); |
3109 | |
3110 | static struct attribute *toshiba_acpi_battery_attrs[] = { |
3111 | &dev_attr_charge_control_end_threshold.attr, |
3112 | NULL, |
3113 | }; |
3114 | |
3115 | ATTRIBUTE_GROUPS(toshiba_acpi_battery); |
3116 | |
3117 | static int toshiba_acpi_battery_add(struct power_supply *battery, struct acpi_battery_hook *hook) |
3118 | { |
3119 | if (toshiba_acpi == NULL) { |
3120 | pr_err("Init order issue\n" ); |
3121 | return -ENODEV; |
3122 | } |
3123 | if (!toshiba_acpi->battery_charge_mode_supported) |
3124 | return -ENODEV; |
3125 | if (device_add_groups(dev: &battery->dev, groups: toshiba_acpi_battery_groups)) |
3126 | return -ENODEV; |
3127 | return 0; |
3128 | } |
3129 | |
3130 | static int toshiba_acpi_battery_remove(struct power_supply *battery, struct acpi_battery_hook *hook) |
3131 | { |
3132 | device_remove_groups(dev: &battery->dev, groups: toshiba_acpi_battery_groups); |
3133 | return 0; |
3134 | } |
3135 | |
3136 | static struct acpi_battery_hook battery_hook = { |
3137 | .add_battery = toshiba_acpi_battery_add, |
3138 | .remove_battery = toshiba_acpi_battery_remove, |
3139 | .name = "Toshiba Battery Extension" , |
3140 | }; |
3141 | |
3142 | static void print_supported_features(struct toshiba_acpi_dev *dev) |
3143 | { |
3144 | pr_info("Supported laptop features:" ); |
3145 | |
3146 | if (dev->hotkey_dev) |
3147 | pr_cont(" hotkeys" ); |
3148 | if (dev->backlight_dev) |
3149 | pr_cont(" backlight" ); |
3150 | if (dev->video_supported) |
3151 | pr_cont(" video-out" ); |
3152 | if (dev->fan_supported) |
3153 | pr_cont(" fan" ); |
3154 | if (dev->fan_rpm_supported) |
3155 | pr_cont(" fan-rpm" ); |
3156 | if (dev->tr_backlight_supported) |
3157 | pr_cont(" transflective-backlight" ); |
3158 | if (dev->illumination_supported) |
3159 | pr_cont(" illumination" ); |
3160 | if (dev->kbd_illum_supported) |
3161 | pr_cont(" keyboard-backlight" ); |
3162 | if (dev->touchpad_supported) |
3163 | pr_cont(" touchpad" ); |
3164 | if (dev->eco_supported) |
3165 | pr_cont(" eco-led" ); |
3166 | if (dev->accelerometer_supported) |
3167 | pr_cont(" accelerometer-axes" ); |
3168 | if (dev->usb_sleep_charge_supported) |
3169 | pr_cont(" usb-sleep-charge" ); |
3170 | if (dev->usb_rapid_charge_supported) |
3171 | pr_cont(" usb-rapid-charge" ); |
3172 | if (dev->usb_sleep_music_supported) |
3173 | pr_cont(" usb-sleep-music" ); |
3174 | if (dev->kbd_function_keys_supported) |
3175 | pr_cont(" special-function-keys" ); |
3176 | if (dev->panel_power_on_supported) |
3177 | pr_cont(" panel-power-on" ); |
3178 | if (dev->usb_three_supported) |
3179 | pr_cont(" usb3" ); |
3180 | if (dev->wwan_supported) |
3181 | pr_cont(" wwan" ); |
3182 | if (dev->cooling_method_supported) |
3183 | pr_cont(" cooling-method" ); |
3184 | if (dev->battery_charge_mode_supported) |
3185 | pr_cont(" battery-charge-mode" ); |
3186 | |
3187 | pr_cont("\n" ); |
3188 | } |
3189 | |
3190 | static void toshiba_acpi_remove(struct acpi_device *acpi_dev) |
3191 | { |
3192 | struct toshiba_acpi_dev *dev = acpi_driver_data(d: acpi_dev); |
3193 | |
3194 | misc_deregister(misc: &dev->miscdev); |
3195 | |
3196 | remove_toshiba_proc_entries(dev); |
3197 | |
3198 | #if IS_ENABLED(CONFIG_HWMON) |
3199 | if (dev->hwmon_device) |
3200 | hwmon_device_unregister(dev: dev->hwmon_device); |
3201 | #endif |
3202 | |
3203 | if (dev->accelerometer_supported && dev->indio_dev) { |
3204 | iio_device_unregister(indio_dev: dev->indio_dev); |
3205 | iio_device_free(indio_dev: dev->indio_dev); |
3206 | } |
3207 | |
3208 | if (dev->sysfs_created) |
3209 | sysfs_remove_group(kobj: &dev->acpi_dev->dev.kobj, |
3210 | grp: &toshiba_attr_group); |
3211 | |
3212 | if (dev->ntfy_supported) { |
3213 | i8042_remove_filter(filter: toshiba_acpi_i8042_filter); |
3214 | cancel_work_sync(work: &dev->hotkey_work); |
3215 | } |
3216 | |
3217 | if (dev->hotkey_dev) |
3218 | input_unregister_device(dev->hotkey_dev); |
3219 | |
3220 | backlight_device_unregister(bd: dev->backlight_dev); |
3221 | |
3222 | led_classdev_unregister(led_cdev: &dev->led_dev); |
3223 | led_classdev_unregister(led_cdev: &dev->kbd_led); |
3224 | led_classdev_unregister(led_cdev: &dev->eco_led); |
3225 | |
3226 | if (dev->wwan_rfk) { |
3227 | rfkill_unregister(rfkill: dev->wwan_rfk); |
3228 | rfkill_destroy(rfkill: dev->wwan_rfk); |
3229 | } |
3230 | |
3231 | if (dev->battery_charge_mode_supported) |
3232 | battery_hook_unregister(hook: &battery_hook); |
3233 | |
3234 | if (toshiba_acpi) |
3235 | toshiba_acpi = NULL; |
3236 | |
3237 | kfree(objp: dev); |
3238 | } |
3239 | |
3240 | static const char *find_hci_method(acpi_handle handle) |
3241 | { |
3242 | if (acpi_has_method(handle, name: "GHCI" )) |
3243 | return "GHCI" ; |
3244 | |
3245 | if (acpi_has_method(handle, name: "SPFC" )) |
3246 | return "SPFC" ; |
3247 | |
3248 | return NULL; |
3249 | } |
3250 | |
3251 | /* |
3252 | * Some Toshibas have a broken acpi-video interface for brightness control, |
3253 | * these are quirked in drivers/acpi/video_detect.c to use the GPU native |
3254 | * (/sys/class/backlight/intel_backlight) instead. |
3255 | * But these need a HCI_SET call to actually turn the panel back on at resume, |
3256 | * without this call the screen stays black at resume. |
3257 | * Either HCI_LCD_BRIGHTNESS (used by acpi_video's _BCM) or HCI_PANEL_POWER_ON |
3258 | * works. toshiba_acpi_resume() uses HCI_PANEL_POWER_ON to avoid changing |
3259 | * the configured brightness level. |
3260 | */ |
3261 | static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = { |
3262 | { |
3263 | /* Toshiba Portégé R700 */ |
3264 | /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */ |
3265 | .matches = { |
3266 | DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA" ), |
3267 | DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700" ), |
3268 | }, |
3269 | }, |
3270 | { |
3271 | /* Toshiba Satellite/Portégé R830 */ |
3272 | /* Portégé: https://bugs.freedesktop.org/show_bug.cgi?id=82634 */ |
3273 | /* Satellite: https://bugzilla.kernel.org/show_bug.cgi?id=21012 */ |
3274 | .matches = { |
3275 | DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA" ), |
3276 | DMI_MATCH(DMI_PRODUCT_NAME, "R830" ), |
3277 | }, |
3278 | }, |
3279 | { |
3280 | /* Toshiba Satellite/Portégé Z830 */ |
3281 | .matches = { |
3282 | DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA" ), |
3283 | DMI_MATCH(DMI_PRODUCT_NAME, "Z830" ), |
3284 | }, |
3285 | }, |
3286 | }; |
3287 | |
3288 | static int toshiba_acpi_add(struct acpi_device *acpi_dev) |
3289 | { |
3290 | struct toshiba_acpi_dev *dev; |
3291 | const char *hci_method; |
3292 | u32 dummy; |
3293 | int ret = 0; |
3294 | |
3295 | if (toshiba_acpi) |
3296 | return -EBUSY; |
3297 | |
3298 | pr_info("Toshiba Laptop ACPI Extras version %s\n" , |
3299 | TOSHIBA_ACPI_VERSION); |
3300 | |
3301 | hci_method = find_hci_method(handle: acpi_dev->handle); |
3302 | if (!hci_method) { |
3303 | pr_err("HCI interface not found\n" ); |
3304 | return -ENODEV; |
3305 | } |
3306 | |
3307 | dev = kzalloc(size: sizeof(*dev), GFP_KERNEL); |
3308 | if (!dev) |
3309 | return -ENOMEM; |
3310 | dev->acpi_dev = acpi_dev; |
3311 | dev->method_hci = hci_method; |
3312 | dev->miscdev.minor = MISC_DYNAMIC_MINOR; |
3313 | dev->miscdev.name = "toshiba_acpi" ; |
3314 | dev->miscdev.fops = &toshiba_acpi_fops; |
3315 | |
3316 | ret = misc_register(misc: &dev->miscdev); |
3317 | if (ret) { |
3318 | pr_err("Failed to register miscdevice\n" ); |
3319 | kfree(objp: dev); |
3320 | return ret; |
3321 | } |
3322 | |
3323 | acpi_dev->driver_data = dev; |
3324 | dev_set_drvdata(dev: &acpi_dev->dev, data: dev); |
3325 | |
3326 | /* Query the BIOS for supported features */ |
3327 | |
3328 | /* |
3329 | * The "Special Functions" are always supported by the laptops |
3330 | * with the new keyboard layout, query for its presence to help |
3331 | * determine the keymap layout to use. |
3332 | */ |
3333 | ret = toshiba_function_keys_get(dev, mode: &dev->special_functions); |
3334 | dev->kbd_function_keys_supported = !ret; |
3335 | |
3336 | dev->hotkey_event_type = 0; |
3337 | if (toshiba_acpi_setup_keyboard(dev)) |
3338 | pr_info("Unable to activate hotkeys\n" ); |
3339 | |
3340 | /* Determine whether or not BIOS supports transflective backlight */ |
3341 | ret = get_tr_backlight_status(dev, status: &dummy); |
3342 | dev->tr_backlight_supported = !ret; |
3343 | |
3344 | ret = toshiba_acpi_setup_backlight(dev); |
3345 | if (ret) |
3346 | goto error; |
3347 | |
3348 | toshiba_illumination_available(dev); |
3349 | if (dev->illumination_supported) { |
3350 | dev->led_dev.name = "toshiba::illumination" ; |
3351 | dev->led_dev.max_brightness = 1; |
3352 | dev->led_dev.brightness_set = toshiba_illumination_set; |
3353 | dev->led_dev.brightness_get = toshiba_illumination_get; |
3354 | led_classdev_register(parent: &acpi_dev->dev, led_cdev: &dev->led_dev); |
3355 | } |
3356 | |
3357 | toshiba_eco_mode_available(dev); |
3358 | if (dev->eco_supported) { |
3359 | dev->eco_led.name = "toshiba::eco_mode" ; |
3360 | dev->eco_led.max_brightness = 1; |
3361 | dev->eco_led.brightness_set = toshiba_eco_mode_set_status; |
3362 | dev->eco_led.brightness_get = toshiba_eco_mode_get_status; |
3363 | led_classdev_register(parent: &dev->acpi_dev->dev, led_cdev: &dev->eco_led); |
3364 | } |
3365 | |
3366 | toshiba_kbd_illum_available(dev); |
3367 | /* |
3368 | * Only register the LED if KBD illumination is supported |
3369 | * and the keyboard backlight operation mode is set to FN-Z |
3370 | * or we detect a second gen keyboard backlight |
3371 | */ |
3372 | if (dev->kbd_illum_supported && |
3373 | (dev->kbd_mode == SCI_KBD_MODE_FNZ || dev->kbd_type == 2)) { |
3374 | dev->kbd_led.name = "toshiba::kbd_backlight" ; |
3375 | dev->kbd_led.flags = LED_BRIGHT_HW_CHANGED; |
3376 | dev->kbd_led.max_brightness = 1; |
3377 | dev->kbd_led.brightness_set = toshiba_kbd_backlight_set; |
3378 | dev->kbd_led.brightness_get = toshiba_kbd_backlight_get; |
3379 | led_classdev_register(parent: &dev->acpi_dev->dev, led_cdev: &dev->kbd_led); |
3380 | } |
3381 | |
3382 | ret = toshiba_touchpad_get(dev, state: &dummy); |
3383 | dev->touchpad_supported = !ret; |
3384 | |
3385 | toshiba_accelerometer_available(dev); |
3386 | if (dev->accelerometer_supported) { |
3387 | dev->indio_dev = iio_device_alloc(parent: &acpi_dev->dev, sizeof_priv: sizeof(*dev)); |
3388 | if (!dev->indio_dev) { |
3389 | pr_err("Unable to allocate iio device\n" ); |
3390 | goto iio_error; |
3391 | } |
3392 | |
3393 | pr_info("Registering Toshiba accelerometer iio device\n" ); |
3394 | |
3395 | dev->indio_dev->info = &toshiba_iio_accel_info; |
3396 | dev->indio_dev->name = "Toshiba accelerometer" ; |
3397 | dev->indio_dev->modes = INDIO_DIRECT_MODE; |
3398 | dev->indio_dev->channels = toshiba_iio_accel_channels; |
3399 | dev->indio_dev->num_channels = |
3400 | ARRAY_SIZE(toshiba_iio_accel_channels); |
3401 | |
3402 | ret = iio_device_register(dev->indio_dev); |
3403 | if (ret < 0) { |
3404 | pr_err("Unable to register iio device\n" ); |
3405 | iio_device_free(indio_dev: dev->indio_dev); |
3406 | } |
3407 | } |
3408 | iio_error: |
3409 | |
3410 | toshiba_usb_sleep_charge_available(dev); |
3411 | |
3412 | ret = toshiba_usb_rapid_charge_get(dev, state: &dummy); |
3413 | dev->usb_rapid_charge_supported = !ret; |
3414 | |
3415 | ret = toshiba_usb_sleep_music_get(dev, state: &dummy); |
3416 | dev->usb_sleep_music_supported = !ret; |
3417 | |
3418 | ret = toshiba_panel_power_on_get(dev, state: &dummy); |
3419 | dev->panel_power_on_supported = !ret; |
3420 | |
3421 | ret = toshiba_usb_three_get(dev, state: &dummy); |
3422 | dev->usb_three_supported = !ret; |
3423 | |
3424 | ret = get_video_status(dev, status: &dummy); |
3425 | dev->video_supported = !ret; |
3426 | |
3427 | ret = get_fan_status(dev, status: &dummy); |
3428 | dev->fan_supported = !ret; |
3429 | |
3430 | ret = get_fan_rpm(dev, rpm: &dummy); |
3431 | dev->fan_rpm_supported = !ret; |
3432 | |
3433 | #if IS_ENABLED(CONFIG_HWMON) |
3434 | if (dev->fan_rpm_supported) { |
3435 | dev->hwmon_device = hwmon_device_register_with_info( |
3436 | dev: &dev->acpi_dev->dev, name: "toshiba_acpi_sensors" , NULL, |
3437 | info: &toshiba_acpi_hwmon_chip_info, NULL); |
3438 | if (IS_ERR(ptr: dev->hwmon_device)) { |
3439 | dev->hwmon_device = NULL; |
3440 | pr_warn("unable to register hwmon device, skipping\n" ); |
3441 | } |
3442 | } |
3443 | #endif |
3444 | |
3445 | if (turn_on_panel_on_resume == -1) |
3446 | turn_on_panel_on_resume = dmi_check_system(list: turn_on_panel_on_resume_dmi_ids); |
3447 | |
3448 | toshiba_wwan_available(dev); |
3449 | if (dev->wwan_supported) |
3450 | toshiba_acpi_setup_wwan_rfkill(dev); |
3451 | |
3452 | toshiba_cooling_method_available(dev); |
3453 | |
3454 | toshiba_battery_charge_mode_available(dev); |
3455 | |
3456 | print_supported_features(dev); |
3457 | |
3458 | ret = sysfs_create_group(kobj: &dev->acpi_dev->dev.kobj, |
3459 | grp: &toshiba_attr_group); |
3460 | if (ret) { |
3461 | dev->sysfs_created = 0; |
3462 | goto error; |
3463 | } |
3464 | dev->sysfs_created = !ret; |
3465 | |
3466 | create_toshiba_proc_entries(dev); |
3467 | |
3468 | toshiba_acpi = dev; |
3469 | |
3470 | /* |
3471 | * As the battery hook relies on the static variable toshiba_acpi being |
3472 | * set, this must be done after toshiba_acpi is assigned. |
3473 | */ |
3474 | if (dev->battery_charge_mode_supported) |
3475 | battery_hook_register(hook: &battery_hook); |
3476 | |
3477 | return 0; |
3478 | |
3479 | error: |
3480 | toshiba_acpi_remove(acpi_dev); |
3481 | return ret; |
3482 | } |
3483 | |
3484 | static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) |
3485 | { |
3486 | struct toshiba_acpi_dev *dev = acpi_driver_data(d: acpi_dev); |
3487 | |
3488 | switch (event) { |
3489 | case 0x80: /* Hotkeys and some system events */ |
3490 | /* |
3491 | * Machines with this WMI GUID aren't supported due to bugs in |
3492 | * their AML. |
3493 | * |
3494 | * Return silently to avoid triggering a netlink event. |
3495 | */ |
3496 | if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) |
3497 | return; |
3498 | toshiba_acpi_process_hotkeys(dev); |
3499 | break; |
3500 | case 0x81: /* Dock events */ |
3501 | case 0x82: |
3502 | case 0x83: |
3503 | pr_info("Dock event received %x\n" , event); |
3504 | break; |
3505 | case 0x88: /* Thermal events */ |
3506 | pr_info("Thermal event received\n" ); |
3507 | break; |
3508 | case 0x8f: /* LID closed */ |
3509 | case 0x90: /* LID is closed and Dock has been ejected */ |
3510 | break; |
3511 | case 0x8c: /* SATA power events */ |
3512 | case 0x8b: |
3513 | pr_info("SATA power event received %x\n" , event); |
3514 | break; |
3515 | case 0x92: /* Keyboard backlight mode changed */ |
3516 | dev->kbd_event_generated = true; |
3517 | /* Update sysfs entries */ |
3518 | if (sysfs_update_group(kobj: &acpi_dev->dev.kobj, |
3519 | grp: &toshiba_attr_group)) |
3520 | pr_err("Unable to update sysfs entries\n" ); |
3521 | /* Notify LED subsystem about keyboard backlight change */ |
3522 | if (dev->kbd_type == 2 && dev->kbd_mode != SCI_KBD_MODE_AUTO) |
3523 | led_classdev_notify_brightness_hw_changed(led_cdev: &dev->kbd_led, |
3524 | brightness: (dev->kbd_mode == SCI_KBD_MODE_ON) ? |
3525 | LED_FULL : LED_OFF); |
3526 | break; |
3527 | case 0x8e: /* Power button pressed */ |
3528 | break; |
3529 | case 0x85: /* Unknown */ |
3530 | case 0x8d: /* Unknown */ |
3531 | case 0x94: /* Unknown */ |
3532 | case 0x95: /* Unknown */ |
3533 | default: |
3534 | pr_info("Unknown event received %x\n" , event); |
3535 | break; |
3536 | } |
3537 | |
3538 | acpi_bus_generate_netlink_event(acpi_dev->pnp.device_class, |
3539 | dev_name(dev: &acpi_dev->dev), |
3540 | event, (event == 0x80) ? |
3541 | dev->last_key_event : 0); |
3542 | } |
3543 | |
3544 | #ifdef CONFIG_PM_SLEEP |
3545 | static int toshiba_acpi_suspend(struct device *device) |
3546 | { |
3547 | struct toshiba_acpi_dev *dev = acpi_driver_data(to_acpi_device(device)); |
3548 | |
3549 | if (dev->hotkey_dev) { |
3550 | u32 result; |
3551 | |
3552 | result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_DISABLE); |
3553 | if (result != TOS_SUCCESS) |
3554 | pr_info("Unable to disable hotkeys\n" ); |
3555 | } |
3556 | |
3557 | return 0; |
3558 | } |
3559 | |
3560 | static int toshiba_acpi_resume(struct device *device) |
3561 | { |
3562 | struct toshiba_acpi_dev *dev = acpi_driver_data(to_acpi_device(device)); |
3563 | |
3564 | if (dev->hotkey_dev) { |
3565 | if (toshiba_acpi_enable_hotkeys(dev)) |
3566 | pr_info("Unable to re-enable hotkeys\n" ); |
3567 | } |
3568 | |
3569 | if (dev->wwan_rfk) { |
3570 | if (!toshiba_wireless_status(dev)) |
3571 | rfkill_set_hw_state(rfkill: dev->wwan_rfk, blocked: !dev->killswitch); |
3572 | } |
3573 | |
3574 | if (turn_on_panel_on_resume) |
3575 | hci_write(dev, HCI_PANEL_POWER_ON, in1: 1); |
3576 | |
3577 | return 0; |
3578 | } |
3579 | #endif |
3580 | |
3581 | static SIMPLE_DEV_PM_OPS(toshiba_acpi_pm, |
3582 | toshiba_acpi_suspend, toshiba_acpi_resume); |
3583 | |
3584 | static struct acpi_driver toshiba_acpi_driver = { |
3585 | .name = "Toshiba ACPI driver" , |
3586 | .owner = THIS_MODULE, |
3587 | .ids = toshiba_device_ids, |
3588 | .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, |
3589 | .ops = { |
3590 | .add = toshiba_acpi_add, |
3591 | .remove = toshiba_acpi_remove, |
3592 | .notify = toshiba_acpi_notify, |
3593 | }, |
3594 | .drv.pm = &toshiba_acpi_pm, |
3595 | }; |
3596 | |
3597 | static int __init toshiba_acpi_init(void) |
3598 | { |
3599 | int ret; |
3600 | |
3601 | toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir); |
3602 | if (!toshiba_proc_dir) { |
3603 | pr_err("Unable to create proc dir " PROC_TOSHIBA "\n" ); |
3604 | return -ENODEV; |
3605 | } |
3606 | |
3607 | ret = acpi_bus_register_driver(driver: &toshiba_acpi_driver); |
3608 | if (ret) { |
3609 | pr_err("Failed to register ACPI driver: %d\n" , ret); |
3610 | remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); |
3611 | } |
3612 | |
3613 | return ret; |
3614 | } |
3615 | |
3616 | static void __exit toshiba_acpi_exit(void) |
3617 | { |
3618 | acpi_bus_unregister_driver(driver: &toshiba_acpi_driver); |
3619 | if (toshiba_proc_dir) |
3620 | remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); |
3621 | } |
3622 | |
3623 | module_init(toshiba_acpi_init); |
3624 | module_exit(toshiba_acpi_exit); |
3625 | |