1// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
2// Copyright(c) 2015-18 Intel Corporation.
3
4/*
5 * stream.c - SoundWire Bus stream operations.
6 */
7
8#include <linux/delay.h>
9#include <linux/device.h>
10#include <linux/init.h>
11#include <linux/module.h>
12#include <linux/mod_devicetable.h>
13#include <linux/slab.h>
14#include <linux/soundwire/sdw_registers.h>
15#include <linux/soundwire/sdw.h>
16#include <linux/soundwire/sdw_type.h>
17#include <sound/soc.h>
18#include "bus.h"
19
20/*
21 * Array of supported rows and columns as per MIPI SoundWire Specification 1.1
22 *
23 * The rows are arranged as per the array index value programmed
24 * in register. The index 15 has dummy value 0 in order to fill hole.
25 */
26int sdw_rows[SDW_FRAME_ROWS] = {48, 50, 60, 64, 75, 80, 125, 147,
27 96, 100, 120, 128, 150, 160, 250, 0,
28 192, 200, 240, 256, 72, 144, 90, 180};
29EXPORT_SYMBOL(sdw_rows);
30
31int sdw_cols[SDW_FRAME_COLS] = {2, 4, 6, 8, 10, 12, 14, 16};
32EXPORT_SYMBOL(sdw_cols);
33
34int sdw_find_col_index(int col)
35{
36 int i;
37
38 for (i = 0; i < SDW_FRAME_COLS; i++) {
39 if (sdw_cols[i] == col)
40 return i;
41 }
42
43 pr_warn("Requested column not found, selecting lowest column no: 2\n");
44 return 0;
45}
46EXPORT_SYMBOL(sdw_find_col_index);
47
48int sdw_find_row_index(int row)
49{
50 int i;
51
52 for (i = 0; i < SDW_FRAME_ROWS; i++) {
53 if (sdw_rows[i] == row)
54 return i;
55 }
56
57 pr_warn("Requested row not found, selecting lowest row no: 48\n");
58 return 0;
59}
60EXPORT_SYMBOL(sdw_find_row_index);
61
62static int _sdw_program_slave_port_params(struct sdw_bus *bus,
63 struct sdw_slave *slave,
64 struct sdw_transport_params *t_params,
65 enum sdw_dpn_type type)
66{
67 u32 addr1, addr2, addr3, addr4;
68 int ret;
69 u16 wbuf;
70
71 if (bus->params.next_bank) {
72 addr1 = SDW_DPN_OFFSETCTRL2_B1(t_params->port_num);
73 addr2 = SDW_DPN_BLOCKCTRL3_B1(t_params->port_num);
74 addr3 = SDW_DPN_SAMPLECTRL2_B1(t_params->port_num);
75 addr4 = SDW_DPN_HCTRL_B1(t_params->port_num);
76 } else {
77 addr1 = SDW_DPN_OFFSETCTRL2_B0(t_params->port_num);
78 addr2 = SDW_DPN_BLOCKCTRL3_B0(t_params->port_num);
79 addr3 = SDW_DPN_SAMPLECTRL2_B0(t_params->port_num);
80 addr4 = SDW_DPN_HCTRL_B0(t_params->port_num);
81 }
82
83 /* Program DPN_OffsetCtrl2 registers */
84 ret = sdw_write_no_pm(slave, addr: addr1, value: t_params->offset2);
85 if (ret < 0) {
86 dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed\n");
87 return ret;
88 }
89
90 /* Program DPN_BlockCtrl3 register */
91 ret = sdw_write_no_pm(slave, addr: addr2, value: t_params->blk_pkg_mode);
92 if (ret < 0) {
93 dev_err(bus->dev, "DPN_BlockCtrl3 register write failed\n");
94 return ret;
95 }
96
97 /*
98 * Data ports are FULL, SIMPLE and REDUCED. This function handles
99 * FULL and REDUCED only and beyond this point only FULL is
100 * handled, so bail out if we are not FULL data port type
101 */
102 if (type != SDW_DPN_FULL)
103 return ret;
104
105 /* Program DPN_SampleCtrl2 register */
106 wbuf = FIELD_GET(SDW_DPN_SAMPLECTRL_HIGH, t_params->sample_interval - 1);
107
108 ret = sdw_write_no_pm(slave, addr: addr3, value: wbuf);
109 if (ret < 0) {
110 dev_err(bus->dev, "DPN_SampleCtrl2 register write failed\n");
111 return ret;
112 }
113
114 /* Program DPN_HCtrl register */
115 wbuf = FIELD_PREP(SDW_DPN_HCTRL_HSTART, t_params->hstart);
116 wbuf |= FIELD_PREP(SDW_DPN_HCTRL_HSTOP, t_params->hstop);
117
118 ret = sdw_write_no_pm(slave, addr: addr4, value: wbuf);
119 if (ret < 0)
120 dev_err(bus->dev, "DPN_HCtrl register write failed\n");
121
122 return ret;
123}
124
125static int sdw_program_slave_port_params(struct sdw_bus *bus,
126 struct sdw_slave_runtime *s_rt,
127 struct sdw_port_runtime *p_rt)
128{
129 struct sdw_transport_params *t_params = &p_rt->transport_params;
130 struct sdw_port_params *p_params = &p_rt->port_params;
131 struct sdw_slave_prop *slave_prop = &s_rt->slave->prop;
132 u32 addr1, addr2, addr3, addr4, addr5, addr6;
133 struct sdw_dpn_prop *dpn_prop;
134 int ret;
135 u8 wbuf;
136
137 if (s_rt->slave->is_mockup_device)
138 return 0;
139
140 dpn_prop = sdw_get_slave_dpn_prop(slave: s_rt->slave,
141 direction: s_rt->direction,
142 port_num: t_params->port_num);
143 if (!dpn_prop)
144 return -EINVAL;
145
146 addr1 = SDW_DPN_PORTCTRL(t_params->port_num);
147 addr2 = SDW_DPN_BLOCKCTRL1(t_params->port_num);
148
149 if (bus->params.next_bank) {
150 addr3 = SDW_DPN_SAMPLECTRL1_B1(t_params->port_num);
151 addr4 = SDW_DPN_OFFSETCTRL1_B1(t_params->port_num);
152 addr5 = SDW_DPN_BLOCKCTRL2_B1(t_params->port_num);
153 addr6 = SDW_DPN_LANECTRL_B1(t_params->port_num);
154
155 } else {
156 addr3 = SDW_DPN_SAMPLECTRL1_B0(t_params->port_num);
157 addr4 = SDW_DPN_OFFSETCTRL1_B0(t_params->port_num);
158 addr5 = SDW_DPN_BLOCKCTRL2_B0(t_params->port_num);
159 addr6 = SDW_DPN_LANECTRL_B0(t_params->port_num);
160 }
161
162 /* Program DPN_PortCtrl register */
163 wbuf = FIELD_PREP(SDW_DPN_PORTCTRL_DATAMODE, p_params->data_mode);
164 wbuf |= FIELD_PREP(SDW_DPN_PORTCTRL_FLOWMODE, p_params->flow_mode);
165
166 ret = sdw_update_no_pm(slave: s_rt->slave, addr: addr1, mask: 0xF, val: wbuf);
167 if (ret < 0) {
168 dev_err(&s_rt->slave->dev,
169 "DPN_PortCtrl register write failed for port %d\n",
170 t_params->port_num);
171 return ret;
172 }
173
174 if (!dpn_prop->read_only_wordlength) {
175 /* Program DPN_BlockCtrl1 register */
176 ret = sdw_write_no_pm(slave: s_rt->slave, addr: addr2, value: (p_params->bps - 1));
177 if (ret < 0) {
178 dev_err(&s_rt->slave->dev,
179 "DPN_BlockCtrl1 register write failed for port %d\n",
180 t_params->port_num);
181 return ret;
182 }
183 }
184
185 /* Program DPN_SampleCtrl1 register */
186 wbuf = (t_params->sample_interval - 1) & SDW_DPN_SAMPLECTRL_LOW;
187 ret = sdw_write_no_pm(slave: s_rt->slave, addr: addr3, value: wbuf);
188 if (ret < 0) {
189 dev_err(&s_rt->slave->dev,
190 "DPN_SampleCtrl1 register write failed for port %d\n",
191 t_params->port_num);
192 return ret;
193 }
194
195 /* Program DPN_OffsetCtrl1 registers */
196 ret = sdw_write_no_pm(slave: s_rt->slave, addr: addr4, value: t_params->offset1);
197 if (ret < 0) {
198 dev_err(&s_rt->slave->dev,
199 "DPN_OffsetCtrl1 register write failed for port %d\n",
200 t_params->port_num);
201 return ret;
202 }
203
204 /* Program DPN_BlockCtrl2 register*/
205 if (t_params->blk_grp_ctrl_valid) {
206 ret = sdw_write_no_pm(slave: s_rt->slave, addr: addr5, value: t_params->blk_grp_ctrl);
207 if (ret < 0) {
208 dev_err(&s_rt->slave->dev,
209 "DPN_BlockCtrl2 reg write failed for port %d\n",
210 t_params->port_num);
211 return ret;
212 }
213 }
214
215 /* program DPN_LaneCtrl register */
216 if (slave_prop->lane_control_support) {
217 ret = sdw_write_no_pm(slave: s_rt->slave, addr: addr6, value: t_params->lane_ctrl);
218 if (ret < 0) {
219 dev_err(&s_rt->slave->dev,
220 "DPN_LaneCtrl register write failed for port %d\n",
221 t_params->port_num);
222 return ret;
223 }
224 }
225
226 if (dpn_prop->type != SDW_DPN_SIMPLE) {
227 ret = _sdw_program_slave_port_params(bus, slave: s_rt->slave,
228 t_params, type: dpn_prop->type);
229 if (ret < 0)
230 dev_err(&s_rt->slave->dev,
231 "Transport reg write failed for port: %d\n",
232 t_params->port_num);
233 }
234
235 return ret;
236}
237
238static int sdw_program_master_port_params(struct sdw_bus *bus,
239 struct sdw_port_runtime *p_rt)
240{
241 int ret;
242
243 /*
244 * we need to set transport and port parameters for the port.
245 * Transport parameters refers to the sample interval, offsets and
246 * hstart/stop etc of the data. Port parameters refers to word
247 * length, flow mode etc of the port
248 */
249 ret = bus->port_ops->dpn_set_port_transport_params(bus,
250 &p_rt->transport_params,
251 bus->params.next_bank);
252 if (ret < 0)
253 return ret;
254
255 return bus->port_ops->dpn_set_port_params(bus,
256 &p_rt->port_params,
257 bus->params.next_bank);
258}
259
260/**
261 * sdw_program_port_params() - Programs transport parameters of Master(s)
262 * and Slave(s)
263 *
264 * @m_rt: Master stream runtime
265 */
266static int sdw_program_port_params(struct sdw_master_runtime *m_rt)
267{
268 struct sdw_slave_runtime *s_rt;
269 struct sdw_bus *bus = m_rt->bus;
270 struct sdw_port_runtime *p_rt;
271 int ret = 0;
272
273 /* Program transport & port parameters for Slave(s) */
274 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
275 list_for_each_entry(p_rt, &s_rt->port_list, port_node) {
276 ret = sdw_program_slave_port_params(bus, s_rt, p_rt);
277 if (ret < 0)
278 return ret;
279 }
280 }
281
282 /* Program transport & port parameters for Master(s) */
283 list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
284 ret = sdw_program_master_port_params(bus, p_rt);
285 if (ret < 0)
286 return ret;
287 }
288
289 return 0;
290}
291
292/**
293 * sdw_enable_disable_slave_ports: Enable/disable slave data port
294 *
295 * @bus: bus instance
296 * @s_rt: slave runtime
297 * @p_rt: port runtime
298 * @en: enable or disable operation
299 *
300 * This function only sets the enable/disable bits in the relevant bank, the
301 * actual enable/disable is done with a bank switch
302 */
303static int sdw_enable_disable_slave_ports(struct sdw_bus *bus,
304 struct sdw_slave_runtime *s_rt,
305 struct sdw_port_runtime *p_rt,
306 bool en)
307{
308 struct sdw_transport_params *t_params = &p_rt->transport_params;
309 u32 addr;
310 int ret;
311
312 if (bus->params.next_bank)
313 addr = SDW_DPN_CHANNELEN_B1(p_rt->num);
314 else
315 addr = SDW_DPN_CHANNELEN_B0(p_rt->num);
316
317 /*
318 * Since bus doesn't support sharing a port across two streams,
319 * it is safe to reset this register
320 */
321 if (en)
322 ret = sdw_write_no_pm(slave: s_rt->slave, addr, value: p_rt->ch_mask);
323 else
324 ret = sdw_write_no_pm(slave: s_rt->slave, addr, value: 0x0);
325
326 if (ret < 0)
327 dev_err(&s_rt->slave->dev,
328 "Slave chn_en reg write failed:%d port:%d\n",
329 ret, t_params->port_num);
330
331 return ret;
332}
333
334static int sdw_enable_disable_master_ports(struct sdw_master_runtime *m_rt,
335 struct sdw_port_runtime *p_rt,
336 bool en)
337{
338 struct sdw_transport_params *t_params = &p_rt->transport_params;
339 struct sdw_bus *bus = m_rt->bus;
340 struct sdw_enable_ch enable_ch;
341 int ret;
342
343 enable_ch.port_num = p_rt->num;
344 enable_ch.ch_mask = p_rt->ch_mask;
345 enable_ch.enable = en;
346
347 /* Perform Master port channel(s) enable/disable */
348 if (bus->port_ops->dpn_port_enable_ch) {
349 ret = bus->port_ops->dpn_port_enable_ch(bus,
350 &enable_ch,
351 bus->params.next_bank);
352 if (ret < 0) {
353 dev_err(bus->dev,
354 "Master chn_en write failed:%d port:%d\n",
355 ret, t_params->port_num);
356 return ret;
357 }
358 } else {
359 dev_err(bus->dev,
360 "dpn_port_enable_ch not supported, %s failed\n",
361 en ? "enable" : "disable");
362 return -EINVAL;
363 }
364
365 return 0;
366}
367
368/**
369 * sdw_enable_disable_ports() - Enable/disable port(s) for Master and
370 * Slave(s)
371 *
372 * @m_rt: Master stream runtime
373 * @en: mode (enable/disable)
374 */
375static int sdw_enable_disable_ports(struct sdw_master_runtime *m_rt, bool en)
376{
377 struct sdw_port_runtime *s_port, *m_port;
378 struct sdw_slave_runtime *s_rt;
379 int ret = 0;
380
381 /* Enable/Disable Slave port(s) */
382 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
383 list_for_each_entry(s_port, &s_rt->port_list, port_node) {
384 ret = sdw_enable_disable_slave_ports(bus: m_rt->bus, s_rt,
385 p_rt: s_port, en);
386 if (ret < 0)
387 return ret;
388 }
389 }
390
391 /* Enable/Disable Master port(s) */
392 list_for_each_entry(m_port, &m_rt->port_list, port_node) {
393 ret = sdw_enable_disable_master_ports(m_rt, p_rt: m_port, en);
394 if (ret < 0)
395 return ret;
396 }
397
398 return 0;
399}
400
401static int sdw_do_port_prep(struct sdw_slave_runtime *s_rt,
402 struct sdw_prepare_ch prep_ch,
403 enum sdw_port_prep_ops cmd)
404{
405 int ret = 0;
406 struct sdw_slave *slave = s_rt->slave;
407
408 mutex_lock(&slave->sdw_dev_lock);
409
410 if (slave->probed) {
411 struct device *dev = &slave->dev;
412 struct sdw_driver *drv = drv_to_sdw_driver(dev->driver);
413
414 if (drv->ops && drv->ops->port_prep) {
415 ret = drv->ops->port_prep(slave, &prep_ch, cmd);
416 if (ret < 0)
417 dev_err(dev, "Slave Port Prep cmd %d failed: %d\n",
418 cmd, ret);
419 }
420 }
421
422 mutex_unlock(lock: &slave->sdw_dev_lock);
423
424 return ret;
425}
426
427static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
428 struct sdw_slave_runtime *s_rt,
429 struct sdw_port_runtime *p_rt,
430 bool prep)
431{
432 struct completion *port_ready;
433 struct sdw_dpn_prop *dpn_prop;
434 struct sdw_prepare_ch prep_ch;
435 bool intr = false;
436 int ret = 0, val;
437 u32 addr;
438
439 prep_ch.num = p_rt->num;
440 prep_ch.ch_mask = p_rt->ch_mask;
441
442 dpn_prop = sdw_get_slave_dpn_prop(slave: s_rt->slave,
443 direction: s_rt->direction,
444 port_num: prep_ch.num);
445 if (!dpn_prop) {
446 dev_err(bus->dev,
447 "Slave Port:%d properties not found\n", prep_ch.num);
448 return -EINVAL;
449 }
450
451 prep_ch.prepare = prep;
452
453 prep_ch.bank = bus->params.next_bank;
454
455 if (dpn_prop->imp_def_interrupts || !dpn_prop->simple_ch_prep_sm ||
456 bus->params.s_data_mode != SDW_PORT_DATA_MODE_NORMAL)
457 intr = true;
458
459 /*
460 * Enable interrupt before Port prepare.
461 * For Port de-prepare, it is assumed that port
462 * was prepared earlier
463 */
464 if (prep && intr) {
465 ret = sdw_configure_dpn_intr(slave: s_rt->slave, port: p_rt->num, enable: prep,
466 mask: dpn_prop->imp_def_interrupts);
467 if (ret < 0)
468 return ret;
469 }
470
471 /* Inform slave about the impending port prepare */
472 sdw_do_port_prep(s_rt, prep_ch, cmd: prep ? SDW_OPS_PORT_PRE_PREP : SDW_OPS_PORT_PRE_DEPREP);
473
474 /* Prepare Slave port implementing CP_SM */
475 if (!dpn_prop->simple_ch_prep_sm) {
476 addr = SDW_DPN_PREPARECTRL(p_rt->num);
477
478 if (prep)
479 ret = sdw_write_no_pm(slave: s_rt->slave, addr, value: p_rt->ch_mask);
480 else
481 ret = sdw_write_no_pm(slave: s_rt->slave, addr, value: 0x0);
482
483 if (ret < 0) {
484 dev_err(&s_rt->slave->dev,
485 "Slave prep_ctrl reg write failed\n");
486 return ret;
487 }
488
489 /* Wait for completion on port ready */
490 port_ready = &s_rt->slave->port_ready[prep_ch.num];
491 wait_for_completion_timeout(x: port_ready,
492 timeout: msecs_to_jiffies(m: dpn_prop->ch_prep_timeout));
493
494 val = sdw_read_no_pm(slave: s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
495 if ((val < 0) || (val & p_rt->ch_mask)) {
496 ret = (val < 0) ? val : -ETIMEDOUT;
497 dev_err(&s_rt->slave->dev,
498 "Chn prep failed for port %d: %d\n", prep_ch.num, ret);
499 return ret;
500 }
501 }
502
503 /* Inform slaves about ports prepared */
504 sdw_do_port_prep(s_rt, prep_ch, cmd: prep ? SDW_OPS_PORT_POST_PREP : SDW_OPS_PORT_POST_DEPREP);
505
506 /* Disable interrupt after Port de-prepare */
507 if (!prep && intr)
508 ret = sdw_configure_dpn_intr(slave: s_rt->slave, port: p_rt->num, enable: prep,
509 mask: dpn_prop->imp_def_interrupts);
510
511 return ret;
512}
513
514static int sdw_prep_deprep_master_ports(struct sdw_master_runtime *m_rt,
515 struct sdw_port_runtime *p_rt,
516 bool prep)
517{
518 struct sdw_transport_params *t_params = &p_rt->transport_params;
519 struct sdw_bus *bus = m_rt->bus;
520 const struct sdw_master_port_ops *ops = bus->port_ops;
521 struct sdw_prepare_ch prep_ch;
522 int ret = 0;
523
524 prep_ch.num = p_rt->num;
525 prep_ch.ch_mask = p_rt->ch_mask;
526 prep_ch.prepare = prep; /* Prepare/De-prepare */
527 prep_ch.bank = bus->params.next_bank;
528
529 /* Pre-prepare/Pre-deprepare port(s) */
530 if (ops->dpn_port_prep) {
531 ret = ops->dpn_port_prep(bus, &prep_ch);
532 if (ret < 0) {
533 dev_err(bus->dev, "Port prepare failed for port:%d\n",
534 t_params->port_num);
535 return ret;
536 }
537 }
538
539 return ret;
540}
541
542/**
543 * sdw_prep_deprep_ports() - Prepare/De-prepare port(s) for Master(s) and
544 * Slave(s)
545 *
546 * @m_rt: Master runtime handle
547 * @prep: Prepare or De-prepare
548 */
549static int sdw_prep_deprep_ports(struct sdw_master_runtime *m_rt, bool prep)
550{
551 struct sdw_slave_runtime *s_rt;
552 struct sdw_port_runtime *p_rt;
553 int ret = 0;
554
555 /* Prepare/De-prepare Slave port(s) */
556 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
557 list_for_each_entry(p_rt, &s_rt->port_list, port_node) {
558 ret = sdw_prep_deprep_slave_ports(bus: m_rt->bus, s_rt,
559 p_rt, prep);
560 if (ret < 0)
561 return ret;
562 }
563 }
564
565 /* Prepare/De-prepare Master port(s) */
566 list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
567 ret = sdw_prep_deprep_master_ports(m_rt, p_rt, prep);
568 if (ret < 0)
569 return ret;
570 }
571
572 return ret;
573}
574
575/**
576 * sdw_notify_config() - Notify bus configuration
577 *
578 * @m_rt: Master runtime handle
579 *
580 * This function notifies the Master(s) and Slave(s) of the
581 * new bus configuration.
582 */
583static int sdw_notify_config(struct sdw_master_runtime *m_rt)
584{
585 struct sdw_slave_runtime *s_rt;
586 struct sdw_bus *bus = m_rt->bus;
587 struct sdw_slave *slave;
588 int ret;
589
590 if (bus->ops->set_bus_conf) {
591 ret = bus->ops->set_bus_conf(bus, &bus->params);
592 if (ret < 0)
593 return ret;
594 }
595
596 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
597 slave = s_rt->slave;
598
599 mutex_lock(&slave->sdw_dev_lock);
600
601 if (slave->probed) {
602 struct device *dev = &slave->dev;
603 struct sdw_driver *drv = drv_to_sdw_driver(dev->driver);
604
605 if (drv->ops && drv->ops->bus_config) {
606 ret = drv->ops->bus_config(slave, &bus->params);
607 if (ret < 0) {
608 dev_err(dev, "Notify Slave: %d failed\n",
609 slave->dev_num);
610 mutex_unlock(lock: &slave->sdw_dev_lock);
611 return ret;
612 }
613 }
614 }
615
616 mutex_unlock(lock: &slave->sdw_dev_lock);
617 }
618
619 return 0;
620}
621
622/**
623 * sdw_program_params() - Program transport and port parameters for Master(s)
624 * and Slave(s)
625 *
626 * @bus: SDW bus instance
627 * @prepare: true if sdw_program_params() is called by _prepare.
628 */
629static int sdw_program_params(struct sdw_bus *bus, bool prepare)
630{
631 struct sdw_master_runtime *m_rt;
632 int ret = 0;
633
634 list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) {
635
636 /*
637 * this loop walks through all master runtimes for a
638 * bus, but the ports can only be configured while
639 * explicitly preparing a stream or handling an
640 * already-prepared stream otherwise.
641 */
642 if (!prepare &&
643 m_rt->stream->state == SDW_STREAM_CONFIGURED)
644 continue;
645
646 ret = sdw_program_port_params(m_rt);
647 if (ret < 0) {
648 dev_err(bus->dev,
649 "Program transport params failed: %d\n", ret);
650 return ret;
651 }
652
653 ret = sdw_notify_config(m_rt);
654 if (ret < 0) {
655 dev_err(bus->dev,
656 "Notify bus config failed: %d\n", ret);
657 return ret;
658 }
659
660 /* Enable port(s) on alternate bank for all active streams */
661 if (m_rt->stream->state != SDW_STREAM_ENABLED)
662 continue;
663
664 ret = sdw_enable_disable_ports(m_rt, en: true);
665 if (ret < 0) {
666 dev_err(bus->dev, "Enable channel failed: %d\n", ret);
667 return ret;
668 }
669 }
670
671 return ret;
672}
673
674static int sdw_bank_switch(struct sdw_bus *bus, int m_rt_count)
675{
676 int col_index, row_index;
677 bool multi_link;
678 struct sdw_msg *wr_msg;
679 u8 *wbuf;
680 int ret;
681 u16 addr;
682
683 wr_msg = kzalloc(size: sizeof(*wr_msg), GFP_KERNEL);
684 if (!wr_msg)
685 return -ENOMEM;
686
687 wbuf = kzalloc(size: sizeof(*wbuf), GFP_KERNEL);
688 if (!wbuf) {
689 ret = -ENOMEM;
690 goto error_1;
691 }
692
693 /* Get row and column index to program register */
694 col_index = sdw_find_col_index(bus->params.col);
695 row_index = sdw_find_row_index(bus->params.row);
696 wbuf[0] = col_index | (row_index << 3);
697
698 if (bus->params.next_bank)
699 addr = SDW_SCP_FRAMECTRL_B1;
700 else
701 addr = SDW_SCP_FRAMECTRL_B0;
702
703 sdw_fill_msg(msg: wr_msg, NULL, addr, count: 1, SDW_BROADCAST_DEV_NUM,
704 flags: SDW_MSG_FLAG_WRITE, buf: wbuf);
705 wr_msg->ssp_sync = true;
706
707 /*
708 * Set the multi_link flag only when both the hardware supports
709 * and hardware-based sync is required
710 */
711 multi_link = bus->multi_link && (m_rt_count >= bus->hw_sync_min_links);
712
713 if (multi_link)
714 ret = sdw_transfer_defer(bus, msg: wr_msg);
715 else
716 ret = sdw_transfer(bus, msg: wr_msg);
717
718 if (ret < 0 && ret != -ENODATA) {
719 dev_err(bus->dev, "Slave frame_ctrl reg write failed\n");
720 goto error;
721 }
722
723 if (!multi_link) {
724 kfree(objp: wbuf);
725 kfree(objp: wr_msg);
726 bus->defer_msg.msg = NULL;
727 bus->params.curr_bank = !bus->params.curr_bank;
728 bus->params.next_bank = !bus->params.next_bank;
729 }
730
731 return 0;
732
733error:
734 kfree(objp: wbuf);
735error_1:
736 kfree(objp: wr_msg);
737 bus->defer_msg.msg = NULL;
738 return ret;
739}
740
741/**
742 * sdw_ml_sync_bank_switch: Multilink register bank switch
743 *
744 * @bus: SDW bus instance
745 * @multi_link: whether this is a multi-link stream with hardware-based sync
746 *
747 * Caller function should free the buffers on error
748 */
749static int sdw_ml_sync_bank_switch(struct sdw_bus *bus, bool multi_link)
750{
751 unsigned long time_left;
752
753 if (!multi_link)
754 return 0;
755
756 /* Wait for completion of transfer */
757 time_left = wait_for_completion_timeout(x: &bus->defer_msg.complete,
758 timeout: bus->bank_switch_timeout);
759
760 if (!time_left) {
761 dev_err(bus->dev, "Controller Timed out on bank switch\n");
762 return -ETIMEDOUT;
763 }
764
765 bus->params.curr_bank = !bus->params.curr_bank;
766 bus->params.next_bank = !bus->params.next_bank;
767
768 if (bus->defer_msg.msg) {
769 kfree(objp: bus->defer_msg.msg->buf);
770 kfree(objp: bus->defer_msg.msg);
771 bus->defer_msg.msg = NULL;
772 }
773
774 return 0;
775}
776
777static int do_bank_switch(struct sdw_stream_runtime *stream)
778{
779 struct sdw_master_runtime *m_rt;
780 const struct sdw_master_ops *ops;
781 struct sdw_bus *bus;
782 bool multi_link = false;
783 int m_rt_count;
784 int ret = 0;
785
786 m_rt_count = stream->m_rt_count;
787
788 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
789 bus = m_rt->bus;
790 ops = bus->ops;
791
792 if (bus->multi_link && m_rt_count >= bus->hw_sync_min_links) {
793 multi_link = true;
794 mutex_lock(&bus->msg_lock);
795 }
796
797 /* Pre-bank switch */
798 if (ops->pre_bank_switch) {
799 ret = ops->pre_bank_switch(bus);
800 if (ret < 0) {
801 dev_err(bus->dev,
802 "Pre bank switch op failed: %d\n", ret);
803 goto msg_unlock;
804 }
805 }
806
807 /*
808 * Perform Bank switch operation.
809 * For multi link cases, the actual bank switch is
810 * synchronized across all Masters and happens later as a
811 * part of post_bank_switch ops.
812 */
813 ret = sdw_bank_switch(bus, m_rt_count);
814 if (ret < 0) {
815 dev_err(bus->dev, "Bank switch failed: %d\n", ret);
816 goto error;
817 }
818 }
819
820 /*
821 * For multi link cases, it is expected that the bank switch is
822 * triggered by the post_bank_switch for the first Master in the list
823 * and for the other Masters the post_bank_switch() should return doing
824 * nothing.
825 */
826 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
827 bus = m_rt->bus;
828 ops = bus->ops;
829
830 /* Post-bank switch */
831 if (ops->post_bank_switch) {
832 ret = ops->post_bank_switch(bus);
833 if (ret < 0) {
834 dev_err(bus->dev,
835 "Post bank switch op failed: %d\n",
836 ret);
837 goto error;
838 }
839 } else if (multi_link) {
840 dev_err(bus->dev,
841 "Post bank switch ops not implemented\n");
842 ret = -EINVAL;
843 goto error;
844 }
845
846 /* Set the bank switch timeout to default, if not set */
847 if (!bus->bank_switch_timeout)
848 bus->bank_switch_timeout = DEFAULT_BANK_SWITCH_TIMEOUT;
849
850 /* Check if bank switch was successful */
851 ret = sdw_ml_sync_bank_switch(bus, multi_link);
852 if (ret < 0) {
853 dev_err(bus->dev,
854 "multi link bank switch failed: %d\n", ret);
855 goto error;
856 }
857
858 if (multi_link)
859 mutex_unlock(lock: &bus->msg_lock);
860 }
861
862 return ret;
863
864error:
865 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
866 bus = m_rt->bus;
867 if (bus->defer_msg.msg) {
868 kfree(objp: bus->defer_msg.msg->buf);
869 kfree(objp: bus->defer_msg.msg);
870 bus->defer_msg.msg = NULL;
871 }
872 }
873
874msg_unlock:
875
876 if (multi_link) {
877 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
878 bus = m_rt->bus;
879 if (mutex_is_locked(lock: &bus->msg_lock))
880 mutex_unlock(lock: &bus->msg_lock);
881 }
882 }
883
884 return ret;
885}
886
887static struct sdw_port_runtime *sdw_port_alloc(struct list_head *port_list)
888{
889 struct sdw_port_runtime *p_rt;
890
891 p_rt = kzalloc(size: sizeof(*p_rt), GFP_KERNEL);
892 if (!p_rt)
893 return NULL;
894
895 list_add_tail(new: &p_rt->port_node, head: port_list);
896
897 return p_rt;
898}
899
900static int sdw_port_config(struct sdw_port_runtime *p_rt,
901 const struct sdw_port_config *port_config,
902 int port_index)
903{
904 p_rt->ch_mask = port_config[port_index].ch_mask;
905 p_rt->num = port_config[port_index].num;
906
907 /*
908 * TODO: Check port capabilities for requested configuration
909 */
910
911 return 0;
912}
913
914static void sdw_port_free(struct sdw_port_runtime *p_rt)
915{
916 list_del(entry: &p_rt->port_node);
917 kfree(objp: p_rt);
918}
919
920static bool sdw_slave_port_allocated(struct sdw_slave_runtime *s_rt)
921{
922 return !list_empty(head: &s_rt->port_list);
923}
924
925static void sdw_slave_port_free(struct sdw_slave *slave,
926 struct sdw_stream_runtime *stream)
927{
928 struct sdw_port_runtime *p_rt, *_p_rt;
929 struct sdw_master_runtime *m_rt;
930 struct sdw_slave_runtime *s_rt;
931
932 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
933 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
934 if (s_rt->slave != slave)
935 continue;
936
937 list_for_each_entry_safe(p_rt, _p_rt,
938 &s_rt->port_list, port_node) {
939 sdw_port_free(p_rt);
940 }
941 }
942 }
943}
944
945static int sdw_slave_port_alloc(struct sdw_slave *slave,
946 struct sdw_slave_runtime *s_rt,
947 unsigned int num_config)
948{
949 struct sdw_port_runtime *p_rt;
950 int i;
951
952 /* Iterate for number of ports to perform initialization */
953 for (i = 0; i < num_config; i++) {
954 p_rt = sdw_port_alloc(port_list: &s_rt->port_list);
955 if (!p_rt)
956 return -ENOMEM;
957 }
958
959 return 0;
960}
961
962static int sdw_slave_port_is_valid_range(struct device *dev, int num)
963{
964 if (!SDW_VALID_PORT_RANGE(num)) {
965 dev_err(dev, "SoundWire: Invalid port number :%d\n", num);
966 return -EINVAL;
967 }
968
969 return 0;
970}
971
972static int sdw_slave_port_config(struct sdw_slave *slave,
973 struct sdw_slave_runtime *s_rt,
974 const struct sdw_port_config *port_config)
975{
976 struct sdw_port_runtime *p_rt;
977 int ret;
978 int i;
979
980 i = 0;
981 list_for_each_entry(p_rt, &s_rt->port_list, port_node) {
982 /*
983 * TODO: Check valid port range as defined by DisCo/
984 * slave
985 */
986 ret = sdw_slave_port_is_valid_range(dev: &slave->dev, num: port_config[i].num);
987 if (ret < 0)
988 return ret;
989
990 ret = sdw_port_config(p_rt, port_config, port_index: i);
991 if (ret < 0)
992 return ret;
993 i++;
994 }
995
996 return 0;
997}
998
999static bool sdw_master_port_allocated(struct sdw_master_runtime *m_rt)
1000{
1001 return !list_empty(head: &m_rt->port_list);
1002}
1003
1004static void sdw_master_port_free(struct sdw_master_runtime *m_rt)
1005{
1006 struct sdw_port_runtime *p_rt, *_p_rt;
1007
1008 list_for_each_entry_safe(p_rt, _p_rt, &m_rt->port_list, port_node) {
1009 sdw_port_free(p_rt);
1010 }
1011}
1012
1013static int sdw_master_port_alloc(struct sdw_master_runtime *m_rt,
1014 unsigned int num_ports)
1015{
1016 struct sdw_port_runtime *p_rt;
1017 int i;
1018
1019 /* Iterate for number of ports to perform initialization */
1020 for (i = 0; i < num_ports; i++) {
1021 p_rt = sdw_port_alloc(port_list: &m_rt->port_list);
1022 if (!p_rt)
1023 return -ENOMEM;
1024 }
1025
1026 return 0;
1027}
1028
1029static int sdw_master_port_config(struct sdw_master_runtime *m_rt,
1030 const struct sdw_port_config *port_config)
1031{
1032 struct sdw_port_runtime *p_rt;
1033 int ret;
1034 int i;
1035
1036 i = 0;
1037 list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
1038 ret = sdw_port_config(p_rt, port_config, port_index: i);
1039 if (ret < 0)
1040 return ret;
1041 i++;
1042 }
1043
1044 return 0;
1045}
1046
1047/**
1048 * sdw_slave_rt_alloc() - Allocate a Slave runtime handle.
1049 *
1050 * @slave: Slave handle
1051 * @m_rt: Master runtime handle
1052 *
1053 * This function is to be called with bus_lock held.
1054 */
1055static struct sdw_slave_runtime
1056*sdw_slave_rt_alloc(struct sdw_slave *slave,
1057 struct sdw_master_runtime *m_rt)
1058{
1059 struct sdw_slave_runtime *s_rt;
1060
1061 s_rt = kzalloc(size: sizeof(*s_rt), GFP_KERNEL);
1062 if (!s_rt)
1063 return NULL;
1064
1065 INIT_LIST_HEAD(list: &s_rt->port_list);
1066 s_rt->slave = slave;
1067
1068 list_add_tail(new: &s_rt->m_rt_node, head: &m_rt->slave_rt_list);
1069
1070 return s_rt;
1071}
1072
1073/**
1074 * sdw_slave_rt_config() - Configure a Slave runtime handle.
1075 *
1076 * @s_rt: Slave runtime handle
1077 * @stream_config: Stream configuration
1078 *
1079 * This function is to be called with bus_lock held.
1080 */
1081static int sdw_slave_rt_config(struct sdw_slave_runtime *s_rt,
1082 struct sdw_stream_config *stream_config)
1083{
1084 s_rt->ch_count = stream_config->ch_count;
1085 s_rt->direction = stream_config->direction;
1086
1087 return 0;
1088}
1089
1090static struct sdw_slave_runtime *sdw_slave_rt_find(struct sdw_slave *slave,
1091 struct sdw_stream_runtime *stream)
1092{
1093 struct sdw_slave_runtime *s_rt, *_s_rt;
1094 struct sdw_master_runtime *m_rt;
1095
1096 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1097 /* Retrieve Slave runtime handle */
1098 list_for_each_entry_safe(s_rt, _s_rt,
1099 &m_rt->slave_rt_list, m_rt_node) {
1100 if (s_rt->slave == slave)
1101 return s_rt;
1102 }
1103 }
1104 return NULL;
1105}
1106
1107/**
1108 * sdw_slave_rt_free() - Free Slave(s) runtime handle
1109 *
1110 * @slave: Slave handle.
1111 * @stream: Stream runtime handle.
1112 *
1113 * This function is to be called with bus_lock held.
1114 */
1115static void sdw_slave_rt_free(struct sdw_slave *slave,
1116 struct sdw_stream_runtime *stream)
1117{
1118 struct sdw_slave_runtime *s_rt;
1119
1120 s_rt = sdw_slave_rt_find(slave, stream);
1121 if (s_rt) {
1122 list_del(entry: &s_rt->m_rt_node);
1123 kfree(objp: s_rt);
1124 }
1125}
1126
1127static struct sdw_master_runtime
1128*sdw_master_rt_find(struct sdw_bus *bus,
1129 struct sdw_stream_runtime *stream)
1130{
1131 struct sdw_master_runtime *m_rt;
1132
1133 /* Retrieve Bus handle if already available */
1134 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1135 if (m_rt->bus == bus)
1136 return m_rt;
1137 }
1138
1139 return NULL;
1140}
1141
1142/**
1143 * sdw_master_rt_alloc() - Allocates a Master runtime handle
1144 *
1145 * @bus: SDW bus instance
1146 * @stream: Stream runtime handle.
1147 *
1148 * This function is to be called with bus_lock held.
1149 */
1150static struct sdw_master_runtime
1151*sdw_master_rt_alloc(struct sdw_bus *bus,
1152 struct sdw_stream_runtime *stream)
1153{
1154 struct sdw_master_runtime *m_rt, *walk_m_rt;
1155 struct list_head *insert_after;
1156
1157 m_rt = kzalloc(size: sizeof(*m_rt), GFP_KERNEL);
1158 if (!m_rt)
1159 return NULL;
1160
1161 /* Initialization of Master runtime handle */
1162 INIT_LIST_HEAD(list: &m_rt->port_list);
1163 INIT_LIST_HEAD(list: &m_rt->slave_rt_list);
1164
1165 /*
1166 * Add in order of bus id so that when taking the bus_lock
1167 * of multiple buses they will always be taken in the same
1168 * order to prevent a mutex deadlock.
1169 */
1170 insert_after = &stream->master_list;
1171 list_for_each_entry_reverse(walk_m_rt, &stream->master_list, stream_node) {
1172 if (walk_m_rt->bus->id < bus->id) {
1173 insert_after = &walk_m_rt->stream_node;
1174 break;
1175 }
1176 }
1177 list_add(new: &m_rt->stream_node, head: insert_after);
1178
1179 list_add_tail(new: &m_rt->bus_node, head: &bus->m_rt_list);
1180
1181 m_rt->bus = bus;
1182 m_rt->stream = stream;
1183
1184 return m_rt;
1185}
1186
1187/**
1188 * sdw_master_rt_config() - Configure Master runtime handle
1189 *
1190 * @m_rt: Master runtime handle
1191 * @stream_config: Stream configuration
1192 *
1193 * This function is to be called with bus_lock held.
1194 */
1195
1196static int sdw_master_rt_config(struct sdw_master_runtime *m_rt,
1197 struct sdw_stream_config *stream_config)
1198{
1199 m_rt->ch_count = stream_config->ch_count;
1200 m_rt->direction = stream_config->direction;
1201
1202 return 0;
1203}
1204
1205/**
1206 * sdw_master_rt_free() - Free Master runtime handle
1207 *
1208 * @m_rt: Master runtime node
1209 * @stream: Stream runtime handle.
1210 *
1211 * This function is to be called with bus_lock held
1212 * It frees the Master runtime handle and associated Slave(s) runtime
1213 * handle. If this is called first then sdw_slave_rt_free() will have
1214 * no effect as Slave(s) runtime handle would already be freed up.
1215 */
1216static void sdw_master_rt_free(struct sdw_master_runtime *m_rt,
1217 struct sdw_stream_runtime *stream)
1218{
1219 struct sdw_slave_runtime *s_rt, *_s_rt;
1220
1221 list_for_each_entry_safe(s_rt, _s_rt, &m_rt->slave_rt_list, m_rt_node) {
1222 sdw_slave_port_free(slave: s_rt->slave, stream);
1223 sdw_slave_rt_free(slave: s_rt->slave, stream);
1224 }
1225
1226 list_del(entry: &m_rt->stream_node);
1227 list_del(entry: &m_rt->bus_node);
1228 kfree(objp: m_rt);
1229}
1230
1231/**
1232 * sdw_config_stream() - Configure the allocated stream
1233 *
1234 * @dev: SDW device
1235 * @stream: SoundWire stream
1236 * @stream_config: Stream configuration for audio stream
1237 * @is_slave: is API called from Slave or Master
1238 *
1239 * This function is to be called with bus_lock held.
1240 */
1241static int sdw_config_stream(struct device *dev,
1242 struct sdw_stream_runtime *stream,
1243 struct sdw_stream_config *stream_config,
1244 bool is_slave)
1245{
1246 /*
1247 * Update the stream rate, channel and bps based on data
1248 * source. For more than one data source (multilink),
1249 * match the rate, bps, stream type and increment number of channels.
1250 *
1251 * If rate/bps is zero, it means the values are not set, so skip
1252 * comparison and allow the value to be set and stored in stream
1253 */
1254 if (stream->params.rate &&
1255 stream->params.rate != stream_config->frame_rate) {
1256 dev_err(dev, "rate not matching, stream:%s\n", stream->name);
1257 return -EINVAL;
1258 }
1259
1260 if (stream->params.bps &&
1261 stream->params.bps != stream_config->bps) {
1262 dev_err(dev, "bps not matching, stream:%s\n", stream->name);
1263 return -EINVAL;
1264 }
1265
1266 stream->type = stream_config->type;
1267 stream->params.rate = stream_config->frame_rate;
1268 stream->params.bps = stream_config->bps;
1269
1270 /* TODO: Update this check during Device-device support */
1271 if (is_slave)
1272 stream->params.ch_count += stream_config->ch_count;
1273
1274 return 0;
1275}
1276
1277/**
1278 * sdw_get_slave_dpn_prop() - Get Slave port capabilities
1279 *
1280 * @slave: Slave handle
1281 * @direction: Data direction.
1282 * @port_num: Port number
1283 */
1284struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
1285 enum sdw_data_direction direction,
1286 unsigned int port_num)
1287{
1288 struct sdw_dpn_prop *dpn_prop;
1289 u8 num_ports;
1290 int i;
1291
1292 if (direction == SDW_DATA_DIR_TX) {
1293 num_ports = hweight32(slave->prop.source_ports);
1294 dpn_prop = slave->prop.src_dpn_prop;
1295 } else {
1296 num_ports = hweight32(slave->prop.sink_ports);
1297 dpn_prop = slave->prop.sink_dpn_prop;
1298 }
1299
1300 for (i = 0; i < num_ports; i++) {
1301 if (dpn_prop[i].num == port_num)
1302 return &dpn_prop[i];
1303 }
1304
1305 return NULL;
1306}
1307
1308/**
1309 * sdw_acquire_bus_lock: Acquire bus lock for all Master runtime(s)
1310 *
1311 * @stream: SoundWire stream
1312 *
1313 * Acquire bus_lock for each of the master runtime(m_rt) part of this
1314 * stream to reconfigure the bus.
1315 * NOTE: This function is called from SoundWire stream ops and is
1316 * expected that a global lock is held before acquiring bus_lock.
1317 */
1318static void sdw_acquire_bus_lock(struct sdw_stream_runtime *stream)
1319{
1320 struct sdw_master_runtime *m_rt;
1321 struct sdw_bus *bus;
1322
1323 /* Iterate for all Master(s) in Master list */
1324 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1325 bus = m_rt->bus;
1326
1327 mutex_lock(&bus->bus_lock);
1328 }
1329}
1330
1331/**
1332 * sdw_release_bus_lock: Release bus lock for all Master runtime(s)
1333 *
1334 * @stream: SoundWire stream
1335 *
1336 * Release the previously held bus_lock after reconfiguring the bus.
1337 * NOTE: This function is called from SoundWire stream ops and is
1338 * expected that a global lock is held before releasing bus_lock.
1339 */
1340static void sdw_release_bus_lock(struct sdw_stream_runtime *stream)
1341{
1342 struct sdw_master_runtime *m_rt;
1343 struct sdw_bus *bus;
1344
1345 /* Iterate for all Master(s) in Master list */
1346 list_for_each_entry_reverse(m_rt, &stream->master_list, stream_node) {
1347 bus = m_rt->bus;
1348 mutex_unlock(lock: &bus->bus_lock);
1349 }
1350}
1351
1352static int _sdw_prepare_stream(struct sdw_stream_runtime *stream,
1353 bool update_params)
1354{
1355 struct sdw_master_runtime *m_rt;
1356 struct sdw_bus *bus;
1357 struct sdw_master_prop *prop;
1358 struct sdw_bus_params params;
1359 int ret;
1360
1361 /* Prepare Master(s) and Slave(s) port(s) associated with stream */
1362 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1363 bus = m_rt->bus;
1364 prop = &bus->prop;
1365 memcpy(&params, &bus->params, sizeof(params));
1366
1367 /* TODO: Support Asynchronous mode */
1368 if ((prop->max_clk_freq % stream->params.rate) != 0) {
1369 dev_err(bus->dev, "Async mode not supported\n");
1370 return -EINVAL;
1371 }
1372
1373 if (update_params) {
1374 /* Increment cumulative bus bandwidth */
1375 /* TODO: Update this during Device-Device support */
1376 bus->params.bandwidth += m_rt->stream->params.rate *
1377 m_rt->ch_count * m_rt->stream->params.bps;
1378
1379 /* Compute params */
1380 if (bus->compute_params) {
1381 ret = bus->compute_params(bus);
1382 if (ret < 0) {
1383 dev_err(bus->dev, "Compute params failed: %d\n",
1384 ret);
1385 goto restore_params;
1386 }
1387 }
1388 }
1389
1390 /* Program params */
1391 ret = sdw_program_params(bus, prepare: true);
1392 if (ret < 0) {
1393 dev_err(bus->dev, "Program params failed: %d\n", ret);
1394 goto restore_params;
1395 }
1396 }
1397
1398 ret = do_bank_switch(stream);
1399 if (ret < 0) {
1400 pr_err("%s: do_bank_switch failed: %d\n", __func__, ret);
1401 goto restore_params;
1402 }
1403
1404 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1405 bus = m_rt->bus;
1406
1407 /* Prepare port(s) on the new clock configuration */
1408 ret = sdw_prep_deprep_ports(m_rt, prep: true);
1409 if (ret < 0) {
1410 dev_err(bus->dev, "Prepare port(s) failed ret = %d\n",
1411 ret);
1412 return ret;
1413 }
1414 }
1415
1416 stream->state = SDW_STREAM_PREPARED;
1417
1418 return ret;
1419
1420restore_params:
1421 memcpy(&bus->params, &params, sizeof(params));
1422 return ret;
1423}
1424
1425/**
1426 * sdw_prepare_stream() - Prepare SoundWire stream
1427 *
1428 * @stream: Soundwire stream
1429 *
1430 * Documentation/driver-api/soundwire/stream.rst explains this API in detail
1431 */
1432int sdw_prepare_stream(struct sdw_stream_runtime *stream)
1433{
1434 bool update_params = true;
1435 int ret;
1436
1437 if (!stream) {
1438 pr_err("SoundWire: Handle not found for stream\n");
1439 return -EINVAL;
1440 }
1441
1442 sdw_acquire_bus_lock(stream);
1443
1444 if (stream->state == SDW_STREAM_PREPARED) {
1445 ret = 0;
1446 goto state_err;
1447 }
1448
1449 if (stream->state != SDW_STREAM_CONFIGURED &&
1450 stream->state != SDW_STREAM_DEPREPARED &&
1451 stream->state != SDW_STREAM_DISABLED) {
1452 pr_err("%s: %s: inconsistent state state %d\n",
1453 __func__, stream->name, stream->state);
1454 ret = -EINVAL;
1455 goto state_err;
1456 }
1457
1458 /*
1459 * when the stream is DISABLED, this means sdw_prepare_stream()
1460 * is called as a result of an underflow or a resume operation.
1461 * In this case, the bus parameters shall not be recomputed, but
1462 * still need to be re-applied
1463 */
1464 if (stream->state == SDW_STREAM_DISABLED)
1465 update_params = false;
1466
1467 ret = _sdw_prepare_stream(stream, update_params);
1468
1469state_err:
1470 sdw_release_bus_lock(stream);
1471 return ret;
1472}
1473EXPORT_SYMBOL(sdw_prepare_stream);
1474
1475static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
1476{
1477 struct sdw_master_runtime *m_rt;
1478 struct sdw_bus *bus;
1479 int ret;
1480
1481 /* Enable Master(s) and Slave(s) port(s) associated with stream */
1482 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1483 bus = m_rt->bus;
1484
1485 /* Program params */
1486 ret = sdw_program_params(bus, prepare: false);
1487 if (ret < 0) {
1488 dev_err(bus->dev, "%s: Program params failed: %d\n", __func__, ret);
1489 return ret;
1490 }
1491
1492 /* Enable port(s) */
1493 ret = sdw_enable_disable_ports(m_rt, en: true);
1494 if (ret < 0) {
1495 dev_err(bus->dev,
1496 "Enable port(s) failed ret: %d\n", ret);
1497 return ret;
1498 }
1499 }
1500
1501 ret = do_bank_switch(stream);
1502 if (ret < 0) {
1503 pr_err("%s: do_bank_switch failed: %d\n", __func__, ret);
1504 return ret;
1505 }
1506
1507 stream->state = SDW_STREAM_ENABLED;
1508 return 0;
1509}
1510
1511/**
1512 * sdw_enable_stream() - Enable SoundWire stream
1513 *
1514 * @stream: Soundwire stream
1515 *
1516 * Documentation/driver-api/soundwire/stream.rst explains this API in detail
1517 */
1518int sdw_enable_stream(struct sdw_stream_runtime *stream)
1519{
1520 int ret;
1521
1522 if (!stream) {
1523 pr_err("SoundWire: Handle not found for stream\n");
1524 return -EINVAL;
1525 }
1526
1527 sdw_acquire_bus_lock(stream);
1528
1529 if (stream->state == SDW_STREAM_ENABLED) {
1530 ret = 0;
1531 goto state_err;
1532 }
1533
1534 if (stream->state != SDW_STREAM_PREPARED &&
1535 stream->state != SDW_STREAM_DISABLED) {
1536 pr_err("%s: %s: inconsistent state state %d\n",
1537 __func__, stream->name, stream->state);
1538 ret = -EINVAL;
1539 goto state_err;
1540 }
1541
1542 ret = _sdw_enable_stream(stream);
1543
1544state_err:
1545 sdw_release_bus_lock(stream);
1546 return ret;
1547}
1548EXPORT_SYMBOL(sdw_enable_stream);
1549
1550static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
1551{
1552 struct sdw_master_runtime *m_rt;
1553 int ret;
1554
1555 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1556 struct sdw_bus *bus = m_rt->bus;
1557
1558 /* Disable port(s) */
1559 ret = sdw_enable_disable_ports(m_rt, en: false);
1560 if (ret < 0) {
1561 dev_err(bus->dev, "Disable port(s) failed: %d\n", ret);
1562 return ret;
1563 }
1564 }
1565 stream->state = SDW_STREAM_DISABLED;
1566
1567 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1568 struct sdw_bus *bus = m_rt->bus;
1569
1570 /* Program params */
1571 ret = sdw_program_params(bus, prepare: false);
1572 if (ret < 0) {
1573 dev_err(bus->dev, "%s: Program params failed: %d\n", __func__, ret);
1574 return ret;
1575 }
1576 }
1577
1578 ret = do_bank_switch(stream);
1579 if (ret < 0) {
1580 pr_err("%s: do_bank_switch failed: %d\n", __func__, ret);
1581 return ret;
1582 }
1583
1584 /* make sure alternate bank (previous current) is also disabled */
1585 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1586 struct sdw_bus *bus = m_rt->bus;
1587
1588 /* Disable port(s) */
1589 ret = sdw_enable_disable_ports(m_rt, en: false);
1590 if (ret < 0) {
1591 dev_err(bus->dev, "Disable port(s) failed: %d\n", ret);
1592 return ret;
1593 }
1594 }
1595
1596 return 0;
1597}
1598
1599/**
1600 * sdw_disable_stream() - Disable SoundWire stream
1601 *
1602 * @stream: Soundwire stream
1603 *
1604 * Documentation/driver-api/soundwire/stream.rst explains this API in detail
1605 */
1606int sdw_disable_stream(struct sdw_stream_runtime *stream)
1607{
1608 int ret;
1609
1610 if (!stream) {
1611 pr_err("SoundWire: Handle not found for stream\n");
1612 return -EINVAL;
1613 }
1614
1615 sdw_acquire_bus_lock(stream);
1616
1617 if (stream->state == SDW_STREAM_DISABLED) {
1618 ret = 0;
1619 goto state_err;
1620 }
1621
1622 if (stream->state != SDW_STREAM_ENABLED) {
1623 pr_err("%s: %s: inconsistent state state %d\n",
1624 __func__, stream->name, stream->state);
1625 ret = -EINVAL;
1626 goto state_err;
1627 }
1628
1629 ret = _sdw_disable_stream(stream);
1630
1631state_err:
1632 sdw_release_bus_lock(stream);
1633 return ret;
1634}
1635EXPORT_SYMBOL(sdw_disable_stream);
1636
1637static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
1638{
1639 struct sdw_master_runtime *m_rt;
1640 struct sdw_bus *bus;
1641 int ret = 0;
1642
1643 list_for_each_entry(m_rt, &stream->master_list, stream_node) {
1644 bus = m_rt->bus;
1645 /* De-prepare port(s) */
1646 ret = sdw_prep_deprep_ports(m_rt, prep: false);
1647 if (ret < 0) {
1648 dev_err(bus->dev,
1649 "De-prepare port(s) failed: %d\n", ret);
1650 return ret;
1651 }
1652
1653 /* TODO: Update this during Device-Device support */
1654 bus->params.bandwidth -= m_rt->stream->params.rate *
1655 m_rt->ch_count * m_rt->stream->params.bps;
1656
1657 /* Compute params */
1658 if (bus->compute_params) {
1659 ret = bus->compute_params(bus);
1660 if (ret < 0) {
1661 dev_err(bus->dev, "Compute params failed: %d\n",
1662 ret);
1663 return ret;
1664 }
1665 }
1666
1667 /* Program params */
1668 ret = sdw_program_params(bus, prepare: false);
1669 if (ret < 0) {
1670 dev_err(bus->dev, "%s: Program params failed: %d\n", __func__, ret);
1671 return ret;
1672 }
1673 }
1674
1675 stream->state = SDW_STREAM_DEPREPARED;
1676 return do_bank_switch(stream);
1677}
1678
1679/**
1680 * sdw_deprepare_stream() - Deprepare SoundWire stream
1681 *
1682 * @stream: Soundwire stream
1683 *
1684 * Documentation/driver-api/soundwire/stream.rst explains this API in detail
1685 */
1686int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
1687{
1688 int ret;
1689
1690 if (!stream) {
1691 pr_err("SoundWire: Handle not found for stream\n");
1692 return -EINVAL;
1693 }
1694
1695 sdw_acquire_bus_lock(stream);
1696
1697 if (stream->state == SDW_STREAM_DEPREPARED) {
1698 ret = 0;
1699 goto state_err;
1700 }
1701
1702 if (stream->state != SDW_STREAM_PREPARED &&
1703 stream->state != SDW_STREAM_DISABLED) {
1704 pr_err("%s: %s: inconsistent state state %d\n",
1705 __func__, stream->name, stream->state);
1706 ret = -EINVAL;
1707 goto state_err;
1708 }
1709
1710 ret = _sdw_deprepare_stream(stream);
1711
1712state_err:
1713 sdw_release_bus_lock(stream);
1714 return ret;
1715}
1716EXPORT_SYMBOL(sdw_deprepare_stream);
1717
1718static int set_stream(struct snd_pcm_substream *substream,
1719 struct sdw_stream_runtime *sdw_stream)
1720{
1721 struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
1722 struct snd_soc_dai *dai;
1723 int ret = 0;
1724 int i;
1725
1726 /* Set stream pointer on all DAIs */
1727 for_each_rtd_dais(rtd, i, dai) {
1728 ret = snd_soc_dai_set_stream(dai, stream: sdw_stream, direction: substream->stream);
1729 if (ret < 0) {
1730 dev_err(rtd->dev, "failed to set stream pointer on dai %s\n", dai->name);
1731 break;
1732 }
1733 }
1734
1735 return ret;
1736}
1737
1738/**
1739 * sdw_alloc_stream() - Allocate and return stream runtime
1740 *
1741 * @stream_name: SoundWire stream name
1742 *
1743 * Allocates a SoundWire stream runtime instance.
1744 * sdw_alloc_stream should be called only once per stream. Typically
1745 * invoked from ALSA/ASoC machine/platform driver.
1746 */
1747struct sdw_stream_runtime *sdw_alloc_stream(const char *stream_name)
1748{
1749 struct sdw_stream_runtime *stream;
1750
1751 stream = kzalloc(size: sizeof(*stream), GFP_KERNEL);
1752 if (!stream)
1753 return NULL;
1754
1755 stream->name = stream_name;
1756 INIT_LIST_HEAD(list: &stream->master_list);
1757 stream->state = SDW_STREAM_ALLOCATED;
1758 stream->m_rt_count = 0;
1759
1760 return stream;
1761}
1762EXPORT_SYMBOL(sdw_alloc_stream);
1763
1764/**
1765 * sdw_startup_stream() - Startup SoundWire stream
1766 *
1767 * @sdw_substream: Soundwire stream
1768 *
1769 * Documentation/driver-api/soundwire/stream.rst explains this API in detail
1770 */
1771int sdw_startup_stream(void *sdw_substream)
1772{
1773 struct snd_pcm_substream *substream = sdw_substream;
1774 struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
1775 struct sdw_stream_runtime *sdw_stream;
1776 char *name;
1777 int ret;
1778
1779 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
1780 name = kasprintf(GFP_KERNEL, fmt: "%s-Playback", substream->name);
1781 else
1782 name = kasprintf(GFP_KERNEL, fmt: "%s-Capture", substream->name);
1783
1784 if (!name)
1785 return -ENOMEM;
1786
1787 sdw_stream = sdw_alloc_stream(name);
1788 if (!sdw_stream) {
1789 dev_err(rtd->dev, "alloc stream failed for substream DAI %s\n", substream->name);
1790 ret = -ENOMEM;
1791 goto error;
1792 }
1793
1794 ret = set_stream(substream, sdw_stream);
1795 if (ret < 0)
1796 goto release_stream;
1797 return 0;
1798
1799release_stream:
1800 sdw_release_stream(stream: sdw_stream);
1801 set_stream(substream, NULL);
1802error:
1803 kfree(objp: name);
1804 return ret;
1805}
1806EXPORT_SYMBOL(sdw_startup_stream);
1807
1808/**
1809 * sdw_shutdown_stream() - Shutdown SoundWire stream
1810 *
1811 * @sdw_substream: Soundwire stream
1812 *
1813 * Documentation/driver-api/soundwire/stream.rst explains this API in detail
1814 */
1815void sdw_shutdown_stream(void *sdw_substream)
1816{
1817 struct snd_pcm_substream *substream = sdw_substream;
1818 struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
1819 struct sdw_stream_runtime *sdw_stream;
1820 struct snd_soc_dai *dai;
1821
1822 /* Find stream from first CPU DAI */
1823 dai = snd_soc_rtd_to_cpu(rtd, 0);
1824
1825 sdw_stream = snd_soc_dai_get_stream(dai, direction: substream->stream);
1826
1827 if (IS_ERR(ptr: sdw_stream)) {
1828 dev_err(rtd->dev, "no stream found for DAI %s\n", dai->name);
1829 return;
1830 }
1831
1832 /* release memory */
1833 kfree(objp: sdw_stream->name);
1834 sdw_release_stream(stream: sdw_stream);
1835
1836 /* clear DAI data */
1837 set_stream(substream, NULL);
1838}
1839EXPORT_SYMBOL(sdw_shutdown_stream);
1840
1841/**
1842 * sdw_release_stream() - Free the assigned stream runtime
1843 *
1844 * @stream: SoundWire stream runtime
1845 *
1846 * sdw_release_stream should be called only once per stream
1847 */
1848void sdw_release_stream(struct sdw_stream_runtime *stream)
1849{
1850 kfree(objp: stream);
1851}
1852EXPORT_SYMBOL(sdw_release_stream);
1853
1854/**
1855 * sdw_stream_add_master() - Allocate and add master runtime to a stream
1856 *
1857 * @bus: SDW Bus instance
1858 * @stream_config: Stream configuration for audio stream
1859 * @port_config: Port configuration for audio stream
1860 * @num_ports: Number of ports
1861 * @stream: SoundWire stream
1862 */
1863int sdw_stream_add_master(struct sdw_bus *bus,
1864 struct sdw_stream_config *stream_config,
1865 const struct sdw_port_config *port_config,
1866 unsigned int num_ports,
1867 struct sdw_stream_runtime *stream)
1868{
1869 struct sdw_master_runtime *m_rt;
1870 bool alloc_master_rt = false;
1871 int ret;
1872
1873 mutex_lock(&bus->bus_lock);
1874
1875 /*
1876 * For multi link streams, add the second master only if
1877 * the bus supports it.
1878 * Check if bus->multi_link is set
1879 */
1880 if (!bus->multi_link && stream->m_rt_count > 0) {
1881 dev_err(bus->dev,
1882 "Multilink not supported, link %d\n", bus->link_id);
1883 ret = -EINVAL;
1884 goto unlock;
1885 }
1886
1887 /*
1888 * check if Master is already allocated (e.g. as a result of Slave adding
1889 * it first), if so skip allocation and go to configuration
1890 */
1891 m_rt = sdw_master_rt_find(bus, stream);
1892 if (!m_rt) {
1893 m_rt = sdw_master_rt_alloc(bus, stream);
1894 if (!m_rt) {
1895 dev_err(bus->dev, "%s: Master runtime alloc failed for stream:%s\n",
1896 __func__, stream->name);
1897 ret = -ENOMEM;
1898 goto unlock;
1899 }
1900
1901 alloc_master_rt = true;
1902 }
1903
1904 if (!sdw_master_port_allocated(m_rt)) {
1905 ret = sdw_master_port_alloc(m_rt, num_ports);
1906 if (ret)
1907 goto alloc_error;
1908
1909 stream->m_rt_count++;
1910 }
1911
1912 ret = sdw_master_rt_config(m_rt, stream_config);
1913 if (ret < 0)
1914 goto unlock;
1915
1916 ret = sdw_config_stream(dev: bus->dev, stream, stream_config, is_slave: false);
1917 if (ret)
1918 goto unlock;
1919
1920 ret = sdw_master_port_config(m_rt, port_config);
1921
1922 goto unlock;
1923
1924alloc_error:
1925 /*
1926 * we only cleanup what was allocated in this routine
1927 */
1928 if (alloc_master_rt)
1929 sdw_master_rt_free(m_rt, stream);
1930unlock:
1931 mutex_unlock(lock: &bus->bus_lock);
1932 return ret;
1933}
1934EXPORT_SYMBOL(sdw_stream_add_master);
1935
1936/**
1937 * sdw_stream_remove_master() - Remove master from sdw_stream
1938 *
1939 * @bus: SDW Bus instance
1940 * @stream: SoundWire stream
1941 *
1942 * This removes and frees port_rt and master_rt from a stream
1943 */
1944int sdw_stream_remove_master(struct sdw_bus *bus,
1945 struct sdw_stream_runtime *stream)
1946{
1947 struct sdw_master_runtime *m_rt, *_m_rt;
1948
1949 mutex_lock(&bus->bus_lock);
1950
1951 list_for_each_entry_safe(m_rt, _m_rt,
1952 &stream->master_list, stream_node) {
1953 if (m_rt->bus != bus)
1954 continue;
1955
1956 sdw_master_port_free(m_rt);
1957 sdw_master_rt_free(m_rt, stream);
1958 stream->m_rt_count--;
1959 }
1960
1961 if (list_empty(head: &stream->master_list))
1962 stream->state = SDW_STREAM_RELEASED;
1963
1964 mutex_unlock(lock: &bus->bus_lock);
1965
1966 return 0;
1967}
1968EXPORT_SYMBOL(sdw_stream_remove_master);
1969
1970/**
1971 * sdw_stream_add_slave() - Allocate and add master/slave runtime to a stream
1972 *
1973 * @slave: SDW Slave instance
1974 * @stream_config: Stream configuration for audio stream
1975 * @stream: SoundWire stream
1976 * @port_config: Port configuration for audio stream
1977 * @num_ports: Number of ports
1978 *
1979 * It is expected that Slave is added before adding Master
1980 * to the Stream.
1981 *
1982 */
1983int sdw_stream_add_slave(struct sdw_slave *slave,
1984 struct sdw_stream_config *stream_config,
1985 const struct sdw_port_config *port_config,
1986 unsigned int num_ports,
1987 struct sdw_stream_runtime *stream)
1988{
1989 struct sdw_slave_runtime *s_rt;
1990 struct sdw_master_runtime *m_rt;
1991 bool alloc_master_rt = false;
1992 bool alloc_slave_rt = false;
1993
1994 int ret;
1995
1996 mutex_lock(&slave->bus->bus_lock);
1997
1998 /*
1999 * check if Master is already allocated, if so skip allocation
2000 * and go to configuration
2001 */
2002 m_rt = sdw_master_rt_find(bus: slave->bus, stream);
2003 if (!m_rt) {
2004 /*
2005 * If this API is invoked by Slave first then m_rt is not valid.
2006 * So, allocate m_rt and add Slave to it.
2007 */
2008 m_rt = sdw_master_rt_alloc(bus: slave->bus, stream);
2009 if (!m_rt) {
2010 dev_err(&slave->dev, "%s: Master runtime alloc failed for stream:%s\n",
2011 __func__, stream->name);
2012 ret = -ENOMEM;
2013 goto unlock;
2014 }
2015
2016 alloc_master_rt = true;
2017 }
2018
2019 s_rt = sdw_slave_rt_find(slave, stream);
2020 if (!s_rt) {
2021 s_rt = sdw_slave_rt_alloc(slave, m_rt);
2022 if (!s_rt) {
2023 dev_err(&slave->dev, "Slave runtime alloc failed for stream:%s\n",
2024 stream->name);
2025 ret = -ENOMEM;
2026 goto alloc_error;
2027 }
2028
2029 alloc_slave_rt = true;
2030 }
2031
2032 if (!sdw_slave_port_allocated(s_rt)) {
2033 ret = sdw_slave_port_alloc(slave, s_rt, num_config: num_ports);
2034 if (ret)
2035 goto alloc_error;
2036 }
2037
2038 ret = sdw_master_rt_config(m_rt, stream_config);
2039 if (ret)
2040 goto unlock;
2041
2042 ret = sdw_slave_rt_config(s_rt, stream_config);
2043 if (ret)
2044 goto unlock;
2045
2046 ret = sdw_config_stream(dev: &slave->dev, stream, stream_config, is_slave: true);
2047 if (ret)
2048 goto unlock;
2049
2050 ret = sdw_slave_port_config(slave, s_rt, port_config);
2051 if (ret)
2052 goto unlock;
2053
2054 /*
2055 * Change stream state to CONFIGURED on first Slave add.
2056 * Bus is not aware of number of Slave(s) in a stream at this
2057 * point so cannot depend on all Slave(s) to be added in order to
2058 * change stream state to CONFIGURED.
2059 */
2060 stream->state = SDW_STREAM_CONFIGURED;
2061 goto unlock;
2062
2063alloc_error:
2064 /*
2065 * we only cleanup what was allocated in this routine. The 'else if'
2066 * is intentional, the 'master_rt_free' will call sdw_slave_rt_free()
2067 * internally.
2068 */
2069 if (alloc_master_rt)
2070 sdw_master_rt_free(m_rt, stream);
2071 else if (alloc_slave_rt)
2072 sdw_slave_rt_free(slave, stream);
2073unlock:
2074 mutex_unlock(lock: &slave->bus->bus_lock);
2075 return ret;
2076}
2077EXPORT_SYMBOL(sdw_stream_add_slave);
2078
2079/**
2080 * sdw_stream_remove_slave() - Remove slave from sdw_stream
2081 *
2082 * @slave: SDW Slave instance
2083 * @stream: SoundWire stream
2084 *
2085 * This removes and frees port_rt and slave_rt from a stream
2086 */
2087int sdw_stream_remove_slave(struct sdw_slave *slave,
2088 struct sdw_stream_runtime *stream)
2089{
2090 mutex_lock(&slave->bus->bus_lock);
2091
2092 sdw_slave_port_free(slave, stream);
2093 sdw_slave_rt_free(slave, stream);
2094
2095 mutex_unlock(lock: &slave->bus->bus_lock);
2096
2097 return 0;
2098}
2099EXPORT_SYMBOL(sdw_stream_remove_slave);
2100

source code of linux/drivers/soundwire/stream.c