Warning: This file is not a C or C++ file. It does not have highlighting.
| 1 | /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
|---|---|
| 2 | /* |
| 3 | * Format of an ARP firewall descriptor |
| 4 | * |
| 5 | * src, tgt, src_mask, tgt_mask, arpop, arpop_mask are always stored in |
| 6 | * network byte order. |
| 7 | * flags are stored in host byte order (of course). |
| 8 | */ |
| 9 | |
| 10 | #ifndef _UAPI_ARPTABLES_H |
| 11 | #define _UAPI_ARPTABLES_H |
| 12 | |
| 13 | #include <linux/types.h> |
| 14 | #include <linux/compiler.h> |
| 15 | #include <linux/if.h> |
| 16 | #include <linux/netfilter_arp.h> |
| 17 | |
| 18 | #include <linux/netfilter/x_tables.h> |
| 19 | |
| 20 | #ifndef __KERNEL__ |
| 21 | #define ARPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN |
| 22 | #define ARPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN |
| 23 | #define arpt_entry_target xt_entry_target |
| 24 | #define arpt_standard_target xt_standard_target |
| 25 | #define arpt_error_target xt_error_target |
| 26 | #define ARPT_CONTINUE XT_CONTINUE |
| 27 | #define ARPT_RETURN XT_RETURN |
| 28 | #define arpt_counters_info xt_counters_info |
| 29 | #define arpt_counters xt_counters |
| 30 | #define ARPT_STANDARD_TARGET XT_STANDARD_TARGET |
| 31 | #define ARPT_ERROR_TARGET XT_ERROR_TARGET |
| 32 | #define ARPT_ENTRY_ITERATE(entries, size, fn, args...) \ |
| 33 | XT_ENTRY_ITERATE(struct arpt_entry, entries, size, fn, ## args) |
| 34 | #endif |
| 35 | |
| 36 | #define ARPT_DEV_ADDR_LEN_MAX 16 |
| 37 | |
| 38 | struct arpt_devaddr_info { |
| 39 | char addr[ARPT_DEV_ADDR_LEN_MAX]; |
| 40 | char mask[ARPT_DEV_ADDR_LEN_MAX]; |
| 41 | }; |
| 42 | |
| 43 | /* Yes, Virginia, you have to zero the padding. */ |
| 44 | struct arpt_arp { |
| 45 | /* Source and target IP addr */ |
| 46 | struct in_addr src, tgt; |
| 47 | /* Mask for src and target IP addr */ |
| 48 | struct in_addr smsk, tmsk; |
| 49 | |
| 50 | /* Device hw address length, src+target device addresses */ |
| 51 | __u8 arhln, arhln_mask; |
| 52 | struct arpt_devaddr_info src_devaddr; |
| 53 | struct arpt_devaddr_info tgt_devaddr; |
| 54 | |
| 55 | /* ARP operation code. */ |
| 56 | __be16 arpop, arpop_mask; |
| 57 | |
| 58 | /* ARP hardware address and protocol address format. */ |
| 59 | __be16 arhrd, arhrd_mask; |
| 60 | __be16 arpro, arpro_mask; |
| 61 | |
| 62 | /* The protocol address length is only accepted if it is 4 |
| 63 | * so there is no use in offering a way to do filtering on it. |
| 64 | */ |
| 65 | |
| 66 | char iniface[IFNAMSIZ], outiface[IFNAMSIZ]; |
| 67 | unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ]; |
| 68 | |
| 69 | /* Flags word */ |
| 70 | __u8 flags; |
| 71 | /* Inverse flags */ |
| 72 | __u16 invflags; |
| 73 | }; |
| 74 | |
| 75 | /* Values for "flag" field in struct arpt_ip (general arp structure). |
| 76 | * No flags defined yet. |
| 77 | */ |
| 78 | #define ARPT_F_MASK 0x00 /* All possible flag bits mask. */ |
| 79 | |
| 80 | /* Values for "inv" field in struct arpt_arp. */ |
| 81 | #define ARPT_INV_VIA_IN 0x0001 /* Invert the sense of IN IFACE. */ |
| 82 | #define ARPT_INV_VIA_OUT 0x0002 /* Invert the sense of OUT IFACE */ |
| 83 | #define ARPT_INV_SRCIP 0x0004 /* Invert the sense of SRC IP. */ |
| 84 | #define ARPT_INV_TGTIP 0x0008 /* Invert the sense of TGT IP. */ |
| 85 | #define ARPT_INV_SRCDEVADDR 0x0010 /* Invert the sense of SRC DEV ADDR. */ |
| 86 | #define ARPT_INV_TGTDEVADDR 0x0020 /* Invert the sense of TGT DEV ADDR. */ |
| 87 | #define ARPT_INV_ARPOP 0x0040 /* Invert the sense of ARP OP. */ |
| 88 | #define ARPT_INV_ARPHRD 0x0080 /* Invert the sense of ARP HRD. */ |
| 89 | #define ARPT_INV_ARPPRO 0x0100 /* Invert the sense of ARP PRO. */ |
| 90 | #define ARPT_INV_ARPHLN 0x0200 /* Invert the sense of ARP HLN. */ |
| 91 | #define ARPT_INV_MASK 0x03FF /* All possible flag bits mask. */ |
| 92 | |
| 93 | /* This structure defines each of the firewall rules. Consists of 3 |
| 94 | parts which are 1) general ARP header stuff 2) match specific |
| 95 | stuff 3) the target to perform if the rule matches */ |
| 96 | struct arpt_entry |
| 97 | { |
| 98 | struct arpt_arp arp; |
| 99 | |
| 100 | /* Size of arpt_entry + matches */ |
| 101 | __u16 target_offset; |
| 102 | /* Size of arpt_entry + matches + target */ |
| 103 | __u16 next_offset; |
| 104 | |
| 105 | /* Back pointer */ |
| 106 | unsigned int comefrom; |
| 107 | |
| 108 | /* Packet and byte counters. */ |
| 109 | struct xt_counters counters; |
| 110 | |
| 111 | /* The matches (if any), then the target. */ |
| 112 | unsigned char elems[]; |
| 113 | }; |
| 114 | |
| 115 | /* |
| 116 | * New IP firewall options for [gs]etsockopt at the RAW IP level. |
| 117 | * Unlike BSD Linux inherits IP options so you don't have to use a raw |
| 118 | * socket for this. Instead we check rights in the calls. |
| 119 | * |
| 120 | * ATTENTION: check linux/in.h before adding new number here. |
| 121 | */ |
| 122 | #define ARPT_BASE_CTL 96 |
| 123 | |
| 124 | #define ARPT_SO_SET_REPLACE (ARPT_BASE_CTL) |
| 125 | #define ARPT_SO_SET_ADD_COUNTERS (ARPT_BASE_CTL + 1) |
| 126 | #define ARPT_SO_SET_MAX ARPT_SO_SET_ADD_COUNTERS |
| 127 | |
| 128 | #define ARPT_SO_GET_INFO (ARPT_BASE_CTL) |
| 129 | #define ARPT_SO_GET_ENTRIES (ARPT_BASE_CTL + 1) |
| 130 | /* #define ARPT_SO_GET_REVISION_MATCH (APRT_BASE_CTL + 2) */ |
| 131 | #define ARPT_SO_GET_REVISION_TARGET (ARPT_BASE_CTL + 3) |
| 132 | #define ARPT_SO_GET_MAX (ARPT_SO_GET_REVISION_TARGET) |
| 133 | |
| 134 | /* The argument to ARPT_SO_GET_INFO */ |
| 135 | struct arpt_getinfo { |
| 136 | /* Which table: caller fills this in. */ |
| 137 | char name[XT_TABLE_MAXNAMELEN]; |
| 138 | |
| 139 | /* Kernel fills these in. */ |
| 140 | /* Which hook entry points are valid: bitmask */ |
| 141 | unsigned int valid_hooks; |
| 142 | |
| 143 | /* Hook entry points: one per netfilter hook. */ |
| 144 | unsigned int hook_entry[NF_ARP_NUMHOOKS]; |
| 145 | |
| 146 | /* Underflow points. */ |
| 147 | unsigned int underflow[NF_ARP_NUMHOOKS]; |
| 148 | |
| 149 | /* Number of entries */ |
| 150 | unsigned int num_entries; |
| 151 | |
| 152 | /* Size of entries. */ |
| 153 | unsigned int size; |
| 154 | }; |
| 155 | |
| 156 | /* The argument to ARPT_SO_SET_REPLACE. */ |
| 157 | struct arpt_replace { |
| 158 | /* Which table. */ |
| 159 | char name[XT_TABLE_MAXNAMELEN]; |
| 160 | |
| 161 | /* Which hook entry points are valid: bitmask. You can't |
| 162 | change this. */ |
| 163 | unsigned int valid_hooks; |
| 164 | |
| 165 | /* Number of entries */ |
| 166 | unsigned int num_entries; |
| 167 | |
| 168 | /* Total size of new entries */ |
| 169 | unsigned int size; |
| 170 | |
| 171 | /* Hook entry points. */ |
| 172 | unsigned int hook_entry[NF_ARP_NUMHOOKS]; |
| 173 | |
| 174 | /* Underflow points. */ |
| 175 | unsigned int underflow[NF_ARP_NUMHOOKS]; |
| 176 | |
| 177 | /* Information about old entries: */ |
| 178 | /* Number of counters (must be equal to current number of entries). */ |
| 179 | unsigned int num_counters; |
| 180 | /* The old entries' counters. */ |
| 181 | struct xt_counters __user *counters; |
| 182 | |
| 183 | /* The entries (hang off end: not really an array). */ |
| 184 | struct arpt_entry entries[]; |
| 185 | }; |
| 186 | |
| 187 | /* The argument to ARPT_SO_GET_ENTRIES. */ |
| 188 | struct arpt_get_entries { |
| 189 | /* Which table: user fills this in. */ |
| 190 | char name[XT_TABLE_MAXNAMELEN]; |
| 191 | |
| 192 | /* User fills this in: total entry size. */ |
| 193 | unsigned int size; |
| 194 | |
| 195 | /* The entries. */ |
| 196 | struct arpt_entry entrytable[]; |
| 197 | }; |
| 198 | |
| 199 | /* Helper functions */ |
| 200 | static __inline__ struct xt_entry_target *arpt_get_target(struct arpt_entry *e) |
| 201 | { |
| 202 | return (struct xt_entry_target *)((char *)e + e->target_offset); |
| 203 | } |
| 204 | |
| 205 | /* |
| 206 | * Main firewall chains definitions and global var's definitions. |
| 207 | */ |
| 208 | #endif /* _UAPI_ARPTABLES_H */ |
| 209 |
Warning: This file is not a C or C++ file. It does not have highlighting.
