1//! Traits and functions used to implement parallel iteration. These are
2//! low-level details -- users of parallel iterators should not need to
3//! interact with them directly. See [the `plumbing` README][r] for a general overview.
4//!
5//! [r]: https://github.com/rayon-rs/rayon/blob/master/src/iter/plumbing/README.md
6
7use crate::join_context;
8
9use super::IndexedParallelIterator;
10
11use std::cmp;
12use std::usize;
13
14/// The `ProducerCallback` trait is a kind of generic closure,
15/// [analogous to `FnOnce`][FnOnce]. See [the corresponding section in
16/// the plumbing README][r] for more details.
17///
18/// [r]: https://github.com/rayon-rs/rayon/blob/master/src/iter/plumbing/README.md#producer-callback
19/// [FnOnce]: https://doc.rust-lang.org/std/ops/trait.FnOnce.html
20pub trait ProducerCallback<T> {
21 /// The type of value returned by this callback. Analogous to
22 /// [`Output` from the `FnOnce` trait][Output].
23 ///
24 /// [Output]: https://doc.rust-lang.org/std/ops/trait.FnOnce.html#associatedtype.Output
25 type Output;
26
27 /// Invokes the callback with the given producer as argument. The
28 /// key point of this trait is that this method is generic over
29 /// `P`, and hence implementors must be defined for any producer.
30 fn callback<P>(self, producer: P) -> Self::Output
31 where
32 P: Producer<Item = T>;
33}
34
35/// A `Producer` is effectively a "splittable `IntoIterator`". That
36/// is, a producer is a value which can be converted into an iterator
37/// at any time: at that point, it simply produces items on demand,
38/// like any iterator. But what makes a `Producer` special is that,
39/// *before* we convert to an iterator, we can also **split** it at a
40/// particular point using the `split_at` method. This will yield up
41/// two producers, one producing the items before that point, and one
42/// producing the items after that point (these two producers can then
43/// independently be split further, or be converted into iterators).
44/// In Rayon, this splitting is used to divide between threads.
45/// See [the `plumbing` README][r] for further details.
46///
47/// Note that each producer will always produce a fixed number of
48/// items N. However, this number N is not queryable through the API;
49/// the consumer is expected to track it.
50///
51/// NB. You might expect `Producer` to extend the `IntoIterator`
52/// trait. However, [rust-lang/rust#20671][20671] prevents us from
53/// declaring the DoubleEndedIterator and ExactSizeIterator
54/// constraints on a required IntoIterator trait, so we inline
55/// IntoIterator here until that issue is fixed.
56///
57/// [r]: https://github.com/rayon-rs/rayon/blob/master/src/iter/plumbing/README.md
58/// [20671]: https://github.com/rust-lang/rust/issues/20671
59pub trait Producer: Send + Sized {
60 /// The type of item that will be produced by this producer once
61 /// it is converted into an iterator.
62 type Item;
63
64 /// The type of iterator we will become.
65 type IntoIter: Iterator<Item = Self::Item> + DoubleEndedIterator + ExactSizeIterator;
66
67 /// Convert `self` into an iterator; at this point, no more parallel splits
68 /// are possible.
69 fn into_iter(self) -> Self::IntoIter;
70
71 /// The minimum number of items that we will process
72 /// sequentially. Defaults to 1, which means that we will split
73 /// all the way down to a single item. This can be raised higher
74 /// using the [`with_min_len`] method, which will force us to
75 /// create sequential tasks at a larger granularity. Note that
76 /// Rayon automatically normally attempts to adjust the size of
77 /// parallel splits to reduce overhead, so this should not be
78 /// needed.
79 ///
80 /// [`with_min_len`]: ../trait.IndexedParallelIterator.html#method.with_min_len
81 fn min_len(&self) -> usize {
82 1
83 }
84
85 /// The maximum number of items that we will process
86 /// sequentially. Defaults to MAX, which means that we can choose
87 /// not to split at all. This can be lowered using the
88 /// [`with_max_len`] method, which will force us to create more
89 /// parallel tasks. Note that Rayon automatically normally
90 /// attempts to adjust the size of parallel splits to reduce
91 /// overhead, so this should not be needed.
92 ///
93 /// [`with_max_len`]: ../trait.IndexedParallelIterator.html#method.with_max_len
94 fn max_len(&self) -> usize {
95 usize::MAX
96 }
97
98 /// Split into two producers; one produces items `0..index`, the
99 /// other `index..N`. Index must be less than or equal to `N`.
100 fn split_at(self, index: usize) -> (Self, Self);
101
102 /// Iterate the producer, feeding each element to `folder`, and
103 /// stop when the folder is full (or all elements have been consumed).
104 ///
105 /// The provided implementation is sufficient for most iterables.
106 fn fold_with<F>(self, folder: F) -> F
107 where
108 F: Folder<Self::Item>,
109 {
110 folder.consume_iter(self.into_iter())
111 }
112}
113
114/// A consumer is effectively a [generalized "fold" operation][fold],
115/// and in fact each consumer will eventually be converted into a
116/// [`Folder`]. What makes a consumer special is that, like a
117/// [`Producer`], it can be **split** into multiple consumers using
118/// the `split_at` method. When a consumer is split, it produces two
119/// consumers, as well as a **reducer**. The two consumers can be fed
120/// items independently, and when they are done the reducer is used to
121/// combine their two results into one. See [the `plumbing`
122/// README][r] for further details.
123///
124/// [r]: https://github.com/rayon-rs/rayon/blob/master/src/iter/plumbing/README.md
125/// [fold]: https://doc.rust-lang.org/std/iter/trait.Iterator.html#method.fold
126/// [`Folder`]: trait.Folder.html
127/// [`Producer`]: trait.Producer.html
128pub trait Consumer<Item>: Send + Sized {
129 /// The type of folder that this consumer can be converted into.
130 type Folder: Folder<Item, Result = Self::Result>;
131
132 /// The type of reducer that is produced if this consumer is split.
133 type Reducer: Reducer<Self::Result>;
134
135 /// The type of result that this consumer will ultimately produce.
136 type Result: Send;
137
138 /// Divide the consumer into two consumers, one processing items
139 /// `0..index` and one processing items from `index..`. Also
140 /// produces a reducer that can be used to reduce the results at
141 /// the end.
142 fn split_at(self, index: usize) -> (Self, Self, Self::Reducer);
143
144 /// Convert the consumer into a folder that can consume items
145 /// sequentially, eventually producing a final result.
146 fn into_folder(self) -> Self::Folder;
147
148 /// Hint whether this `Consumer` would like to stop processing
149 /// further items, e.g. if a search has been completed.
150 fn full(&self) -> bool;
151}
152
153/// The `Folder` trait encapsulates [the standard fold
154/// operation][fold]. It can be fed many items using the `consume`
155/// method. At the end, once all items have been consumed, it can then
156/// be converted (using `complete`) into a final value.
157///
158/// [fold]: https://doc.rust-lang.org/std/iter/trait.Iterator.html#method.fold
159pub trait Folder<Item>: Sized {
160 /// The type of result that will ultimately be produced by the folder.
161 type Result;
162
163 /// Consume next item and return new sequential state.
164 fn consume(self, item: Item) -> Self;
165
166 /// Consume items from the iterator until full, and return new sequential state.
167 ///
168 /// This method is **optional**. The default simply iterates over
169 /// `iter`, invoking `consume` and checking after each iteration
170 /// whether `full` returns false.
171 ///
172 /// The main reason to override it is if you can provide a more
173 /// specialized, efficient implementation.
174 fn consume_iter<I>(mut self, iter: I) -> Self
175 where
176 I: IntoIterator<Item = Item>,
177 {
178 for item in iter {
179 self = self.consume(item);
180 if self.full() {
181 break;
182 }
183 }
184 self
185 }
186
187 /// Finish consuming items, produce final result.
188 fn complete(self) -> Self::Result;
189
190 /// Hint whether this `Folder` would like to stop processing
191 /// further items, e.g. if a search has been completed.
192 fn full(&self) -> bool;
193}
194
195/// The reducer is the final step of a `Consumer` -- after a consumer
196/// has been split into two parts, and each of those parts has been
197/// fully processed, we are left with two results. The reducer is then
198/// used to combine those two results into one. See [the `plumbing`
199/// README][r] for further details.
200///
201/// [r]: https://github.com/rayon-rs/rayon/blob/master/src/iter/plumbing/README.md
202pub trait Reducer<Result> {
203 /// Reduce two final results into one; this is executed after a
204 /// split.
205 fn reduce(self, left: Result, right: Result) -> Result;
206}
207
208/// A stateless consumer can be freely copied. These consumers can be
209/// used like regular consumers, but they also support a
210/// `split_off_left` method that does not take an index to split, but
211/// simply splits at some arbitrary point (`for_each`, for example,
212/// produces an unindexed consumer).
213pub trait UnindexedConsumer<I>: Consumer<I> {
214 /// Splits off a "left" consumer and returns it. The `self`
215 /// consumer should then be used to consume the "right" portion of
216 /// the data. (The ordering matters for methods like find_first --
217 /// values produced by the returned value are given precedence
218 /// over values produced by `self`.) Once the left and right
219 /// halves have been fully consumed, you should reduce the results
220 /// with the result of `to_reducer`.
221 fn split_off_left(&self) -> Self;
222
223 /// Creates a reducer that can be used to combine the results from
224 /// a split consumer.
225 fn to_reducer(&self) -> Self::Reducer;
226}
227
228/// A variant on `Producer` which does not know its exact length or
229/// cannot represent it in a `usize`. These producers act like
230/// ordinary producers except that they cannot be told to split at a
231/// particular point. Instead, you just ask them to split 'somewhere'.
232///
233/// (In principle, `Producer` could extend this trait; however, it
234/// does not because to do so would require producers to carry their
235/// own length with them.)
236pub trait UnindexedProducer: Send + Sized {
237 /// The type of item returned by this producer.
238 type Item;
239
240 /// Split midway into a new producer if possible, otherwise return `None`.
241 fn split(self) -> (Self, Option<Self>);
242
243 /// Iterate the producer, feeding each element to `folder`, and
244 /// stop when the folder is full (or all elements have been consumed).
245 fn fold_with<F>(self, folder: F) -> F
246 where
247 F: Folder<Self::Item>;
248}
249
250/// A splitter controls the policy for splitting into smaller work items.
251///
252/// Thief-splitting is an adaptive policy that starts by splitting into
253/// enough jobs for every worker thread, and then resets itself whenever a
254/// job is actually stolen into a different thread.
255#[derive(Clone, Copy)]
256struct Splitter {
257 /// The `splits` tell us approximately how many remaining times we'd
258 /// like to split this job. We always just divide it by two though, so
259 /// the effective number of pieces will be `next_power_of_two()`.
260 splits: usize,
261}
262
263impl Splitter {
264 #[inline]
265 fn new() -> Splitter {
266 Splitter {
267 splits: crate::current_num_threads(),
268 }
269 }
270
271 #[inline]
272 fn try_split(&mut self, stolen: bool) -> bool {
273 let Splitter { splits } = *self;
274
275 if stolen {
276 // This job was stolen! Reset the number of desired splits to the
277 // thread count, if that's more than we had remaining anyway.
278 self.splits = cmp::max(crate::current_num_threads(), self.splits / 2);
279 true
280 } else if splits > 0 {
281 // We have splits remaining, make it so.
282 self.splits /= 2;
283 true
284 } else {
285 // Not stolen, and no more splits -- we're done!
286 false
287 }
288 }
289}
290
291/// The length splitter is built on thief-splitting, but additionally takes
292/// into account the remaining length of the iterator.
293#[derive(Clone, Copy)]
294struct LengthSplitter {
295 inner: Splitter,
296
297 /// The smallest we're willing to divide into. Usually this is just 1,
298 /// but you can choose a larger working size with `with_min_len()`.
299 min: usize,
300}
301
302impl LengthSplitter {
303 /// Creates a new splitter based on lengths.
304 ///
305 /// The `min` is a hard lower bound. We'll never split below that, but
306 /// of course an iterator might start out smaller already.
307 ///
308 /// The `max` is an upper bound on the working size, used to determine
309 /// the minimum number of times we need to split to get under that limit.
310 /// The adaptive algorithm may very well split even further, but never
311 /// smaller than the `min`.
312 #[inline]
313 fn new(min: usize, max: usize, len: usize) -> LengthSplitter {
314 let mut splitter = LengthSplitter {
315 inner: Splitter::new(),
316 min: cmp::max(min, 1),
317 };
318
319 // Divide the given length by the max working length to get the minimum
320 // number of splits we need to get under that max. This rounds down,
321 // but the splitter actually gives `next_power_of_two()` pieces anyway.
322 // e.g. len 12345 / max 100 = 123 min_splits -> 128 pieces.
323 let min_splits = len / cmp::max(max, 1);
324
325 // Only update the value if it's not splitting enough already.
326 if min_splits > splitter.inner.splits {
327 splitter.inner.splits = min_splits;
328 }
329
330 splitter
331 }
332
333 #[inline]
334 fn try_split(&mut self, len: usize, stolen: bool) -> bool {
335 // If splitting wouldn't make us too small, try the inner splitter.
336 len / 2 >= self.min && self.inner.try_split(stolen)
337 }
338}
339
340/// This helper function is used to "connect" a parallel iterator to a
341/// consumer. It will convert the `par_iter` into a producer P and
342/// then pull items from P and feed them to `consumer`, splitting and
343/// creating parallel threads as needed.
344///
345/// This is useful when you are implementing your own parallel
346/// iterators: it is often used as the definition of the
347/// [`drive_unindexed`] or [`drive`] methods.
348///
349/// [`drive_unindexed`]: ../trait.ParallelIterator.html#tymethod.drive_unindexed
350/// [`drive`]: ../trait.IndexedParallelIterator.html#tymethod.drive
351pub fn bridge<I, C>(par_iter: I, consumer: C) -> C::Result
352where
353 I: IndexedParallelIterator,
354 C: Consumer<I::Item>,
355{
356 let len: usize = par_iter.len();
357 return par_iter.with_producer(Callback { len, consumer });
358
359 struct Callback<C> {
360 len: usize,
361 consumer: C,
362 }
363
364 impl<C, I> ProducerCallback<I> for Callback<C>
365 where
366 C: Consumer<I>,
367 {
368 type Output = C::Result;
369 fn callback<P>(self, producer: P) -> C::Result
370 where
371 P: Producer<Item = I>,
372 {
373 bridge_producer_consumer(self.len, producer, self.consumer)
374 }
375 }
376}
377
378/// This helper function is used to "connect" a producer and a
379/// consumer. You may prefer to call [`bridge`], which wraps this
380/// function. This function will draw items from `producer` and feed
381/// them to `consumer`, splitting and creating parallel tasks when
382/// needed.
383///
384/// This is useful when you are implementing your own parallel
385/// iterators: it is often used as the definition of the
386/// [`drive_unindexed`] or [`drive`] methods.
387///
388/// [`bridge`]: fn.bridge.html
389/// [`drive_unindexed`]: ../trait.ParallelIterator.html#tymethod.drive_unindexed
390/// [`drive`]: ../trait.IndexedParallelIterator.html#tymethod.drive
391pub fn bridge_producer_consumer<P, C>(len: usize, producer: P, consumer: C) -> C::Result
392where
393 P: Producer,
394 C: Consumer<P::Item>,
395{
396 let splitter = LengthSplitter::new(producer.min_len(), producer.max_len(), len);
397 return helper(len, false, splitter, producer, consumer);
398
399 fn helper<P, C>(
400 len: usize,
401 migrated: bool,
402 mut splitter: LengthSplitter,
403 producer: P,
404 consumer: C,
405 ) -> C::Result
406 where
407 P: Producer,
408 C: Consumer<P::Item>,
409 {
410 if consumer.full() {
411 consumer.into_folder().complete()
412 } else if splitter.try_split(len, migrated) {
413 let mid = len / 2;
414 let (left_producer, right_producer) = producer.split_at(mid);
415 let (left_consumer, right_consumer, reducer) = consumer.split_at(mid);
416 let (left_result, right_result) = join_context(
417 |context| {
418 helper(
419 mid,
420 context.migrated(),
421 splitter,
422 left_producer,
423 left_consumer,
424 )
425 },
426 |context| {
427 helper(
428 len - mid,
429 context.migrated(),
430 splitter,
431 right_producer,
432 right_consumer,
433 )
434 },
435 );
436 reducer.reduce(left_result, right_result)
437 } else {
438 producer.fold_with(consumer.into_folder()).complete()
439 }
440 }
441}
442
443/// A variant of [`bridge_producer_consumer`] where the producer is an unindexed producer.
444///
445/// [`bridge_producer_consumer`]: fn.bridge_producer_consumer.html
446pub fn bridge_unindexed<P, C>(producer: P, consumer: C) -> C::Result
447where
448 P: UnindexedProducer,
449 C: UnindexedConsumer<P::Item>,
450{
451 let splitter: Splitter = Splitter::new();
452 bridge_unindexed_producer_consumer(migrated:false, splitter, producer, consumer)
453}
454
455fn bridge_unindexed_producer_consumer<P, C>(
456 migrated: bool,
457 mut splitter: Splitter,
458 producer: P,
459 consumer: C,
460) -> C::Result
461where
462 P: UnindexedProducer,
463 C: UnindexedConsumer<P::Item>,
464{
465 if consumer.full() {
466 consumer.into_folder().complete()
467 } else if splitter.try_split(stolen:migrated) {
468 match producer.split() {
469 (left_producer: P, Some(right_producer: P)) => {
470 let (reducer: ::Item>>::Reducer, left_consumer: C, right_consumer: C) =
471 (consumer.to_reducer(), consumer.split_off_left(), consumer);
472 let bridge: fn bridge_unindexed_producer_consumer<…>(…) -> … = bridge_unindexed_producer_consumer;
473 let (left_result: ::Item>>::Result, right_result: ::Item>>::Result) = join_context(
474 |context| bridge(context.migrated(), splitter, left_producer, left_consumer),
475 |context: FnContext| bridge(context.migrated(), splitter, right_producer, right_consumer),
476 );
477 reducer.reduce(left_result, right_result)
478 }
479 (producer: P, None) => producer.fold_with(consumer.into_folder()).complete(),
480 }
481 } else {
482 producer.fold_with(consumer.into_folder()).complete()
483 }
484}
485