1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Maxtor Shared Storage II Board Setup
4 *
5 * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
6 */
7
8#include <linux/kernel.h>
9#include <linux/init.h>
10#include <linux/platform_device.h>
11#include <linux/pci.h>
12#include <linux/irq.h>
13#include <asm/mach-types.h>
14#include <asm/mach/arch.h>
15#include <asm/mach/pci.h>
16#include "orion5x.h"
17#include "bridge-regs.h"
18#include "common.h"
19
20/*****************************************************************************
21 * Maxtor Shared Storage II Info
22 ****************************************************************************/
23
24/****************************************************************************
25 * PCI setup
26 ****************************************************************************/
27static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
28{
29 int irq;
30
31 /*
32 * Check for devices with hard-wired IRQs.
33 */
34 irq = orion5x_pci_map_irq(dev, slot, pin);
35 if (irq != -1)
36 return irq;
37
38 return -1;
39}
40
41static struct hw_pci mss2_pci __initdata = {
42 .nr_controllers = 2,
43 .setup = orion5x_pci_sys_setup,
44 .scan = orion5x_pci_sys_scan_bus,
45 .map_irq = mss2_pci_map_irq,
46};
47
48static int __init mss2_pci_init(void)
49{
50 if (machine_is_mss2())
51 pci_common_init(&mss2_pci);
52
53 return 0;
54}
55subsys_initcall(mss2_pci_init);
56
57/*****************************************************************************
58 * MSS2 power off method
59 ****************************************************************************/
60/*
61 * On the Maxtor Shared Storage II, the shutdown process is the following :
62 * - Userland modifies U-boot env to tell U-boot to go idle at next boot
63 * - The board reboots
64 * - U-boot starts and go into an idle mode until the user press "power"
65 */
66static void mss2_power_off(void)
67{
68 u32 reg;
69
70 /*
71 * Enable and issue soft reset
72 */
73 reg = readl(RSTOUTn_MASK);
74 reg |= 1 << 2;
75 writel(val: reg, RSTOUTn_MASK);
76
77 reg = readl(CPU_SOFT_RESET);
78 reg |= 1;
79 writel(val: reg, CPU_SOFT_RESET);
80}
81
82void __init mss2_init(void)
83{
84 /* register mss2 specific power-off method */
85 pm_power_off = mss2_power_off;
86}
87

source code of linux/arch/arm/mach-orion5x/board-mss2.c